HPE 1810 Switch Series
Data sheet
Key features
• Customized operation using intuitive Web interface
• Flexible connection and deployment options
• Layer 2 operation at wire speeds
• Fanless design for quiet operation
• Limited lifetime warranty
Product overview
HPE 1810 Switch Series devices are smart-managed, fixed-configuration Gigabit Ethernet
and Fast Ethernet Layer 2 switches designed for small businesses looking for key features in
an easy-to-administer solution.
The series includes 8- and 24-port Gigabit Ethernet and Fast Ethernet models and a 48-port
Gigabit Ethernet switch. Some models include SFP ports for fiber connectivity and some
are fanless, making them ideal for oice deployments. All HPE 1810 Switch Series support
flexible installation options, including mounting on walls, under tables, or on desktops. The
8-port Gigabit Ethernet model can be powered by an upstream Power over Ethernet (PoE)
switch for environments where no line power is available.
Customizable features include VLANs, Spanning Tree, and link aggregation trunking; 8- and
24-port switches oer Rapid Spanning Tree Protocol (RSTP) and DSCP QoS policies.
The 8- and 24-port models also include the latest energy-saving capabilities, including Energy
Eicient Ethernet (EEE) and idle-port power down. HPE 1810 switches are covered by a
limited lifetime warranty.
Data sheet
Page 2
Features and benefits
Connectivity
• Auto-MDI/MDIX
Automatically adjusts for straight-through or crossover cables on all ports
• Packet storm protection
Protects against broadcast, multicast, or unicast storms with user-defined thresholds
• IEEE 802.3af PoE-powered device option
Obtains power provided by a standard PoE device connected to Port 1; deploys the switch
wherever an Ethernet cable can reach as a power outlet is not needed (8-port GbE model
onl y)
• SFP ports for fiber connectivity
Provides fiber connections for uplinks and other connections across longer distances
than copper cabling can support; “true” SFP ports operate in addition to available copper
Ethernet ports, providing a higher total number of available ports vs. “combo” ports, which
are either a copper or fiber connection
Performance
• Half- or full-duplex auto-negotiating capability on every port doubles the throughput of every
port
• Link aggregation (trunking)
Brings together groups of ports automatically using Link Aggregation Control Protocol
(LACP) or, manually, to form an ultra-high-bandwidth connection to the network backbone;
helps prevent traic bottlenecks; 8-port models have four trunks of four links each, the 24port models have eight trunks of four links each, and HPE 1810-48G Switch has 16 trunks of
eight links each
Quality of service (QoS)
• Traic prioritization (IEEE 802.1p)
Allows real-time traic classification with eight priority levels mapped to four queues
• IEEE 802.1p prioritization with DSCP
Delivers data from the switch to devices based on the priority and type of traic using
Dierentiated Services Code Point (DSCP); available only with v2 switch models
• Broadcast control
Allows limitation of broadcast traic rate to cut down on unwanted network broadcast traic
Layer 2 switching
• VLAN support and tagging
Supports up to 64 port-based VLANs and dynamic configuration of IEEE 802.1Q VLAN
tagging, providing security between workgroups
• Jumbo packet support
Improves the performance of large data transfers; supports frame size of up to 9,220 bytes
Resiliency and high availability
• IEEE 802.1D Spanning Tree Protocol (STP) and IEEE 802.1W Rapid Spanning Tree Protocol
(RSTP)
Provide redundant links while preventing network loops; available only with v2 switch
models
Security
• Secure Sockets Layer (SSL)
Encrypts all HTTP traic, allowing secure access to the browser-based management GUI
in the switch
Data sheet
Page 3
• Automatic denial-of-service protection
Monitors six types of malicious attacks and protects the network by blocking the attacks
• Management password
Provides security so that only authorized access to the Web browser interface is allowed
Ease of use
• Locator LED (switch)
Allows users to set the locator LED on a specific switch to either turn on, blink, or turn o;
simplifies troubleshooting by making it easy to locate a particular switch within a rack of
similar switches
• Comprehensive LED display with per-port indicators
Provides an at-a-glance view of status, activity, speed, and full-duplex operation
Flexibility
• Flexible installation
Allows mounting on wall, desktop, or under-table
• Rack mountable (24- and 48-port models)
Oers a rack-mounting option with included hardware
• Kensington lock slot
Allows switches to be physically secured in open-space deployments
Management
• Simple Web management
Allows easy management of devices by nontechnical users with its intuitive Web GUI
• Secure Web GUI
Provides a secure, easy-to-use graphical interface for configuring the module via HTTPS
• SNMPv1, v2c
Enable devices to be discovered and monitored from an SNMP management station
• Dual flash images
Provide independent primary and secondary operating system files for backup while
upgrading
• Port mirroring
Enables traic on a port to be simultaneously sent to a network analyzer for monitoring
• IEEE 802.1AB Link Layer Discovery Protocol (LLDP)
Advertises and receives management information from adjacent devices on a network,
facilitating easy mapping by network management applications
Additional information
• Energy savings
Utilizes Energy Eicient Ethernet (EEE) IEEE 802.3az standard for lower power consumption;
available only with v2 switch models
• Green IT and power
Places inactive ports automatically in low-power mode and its LED in power-down mode,
to conserve energy
• Green initiative support
Provides support for RoHS and WEEE regulations
Warranty and support
• Limited Lifetime Warranty
See hpe.com/networking/warrantysummary for warranty and support information
included with your product purchase.
Data sheet
HPE 1810 Switch Series
SPECIFICATIONS HPE 1810-24G v2 Switch (J9803A) HPE 1810-48G Switch (J9660A) HPE 1810-8 v2 Switch (J9800A)
Page 4
I/O ports and slots 24 RJ-45 autosensing 10/100/1000 ports
Physical characteristics
Dimensions
Weight
Memory and processor 128 MB RAM, 8 MB flash;
Mounting and enclosure Mounts in an EIA-standard 19 in. telco
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 10 0 BAS E-T X ,
IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 SFP 100/1000 Mbps ports
Supports a maximum of 24 autosensing
10/100/1000 ports plus 2 SFP ports
12.99(w) x 6.81(d) x 1.73(h) in
(32.99 x 17.3 x 4.39 cm) (1U height)
2.54 lb (1.15 kg)
packet buer size: 512 KB
rack (hardware included); horizontal
surface, wall, and under-table mounting
< 3.3 µs (64-byte packets)
< 2.2 µs (64-byte packets)
up to 38.7 Mpps
52 Gbps
8000 entries
48 RJ-45 autosensing 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
4 SFP 100/1000 Mbps ports
Supports a maximum of 48 autosensing
10/100/1000 ports plus 4 SFP ports
17.4(w) x 9.75(d) x 1.75(h) in
(44.2 x 24.77 x 4.45 cm) (1U height)
6.31 lb (2.86 kg)
64 MB RAM, 8 MB flash;
packet buer size: 1. 5 MB
Mounts in an EIA-standard 19 in. telco
rack (hardware included); wall, desktop,
tabletop, and under-table mounting
< 8.4 µs (64-byte packets)
< 3.2 µs (64-byte packets)
up to 77.4 Mpps
104 Gbps
16000 entries
7 RJ-45 autosensing 10/100 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Duplex: half or full
1 RJ-45 autosensing 10/100/1000 port
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX,
IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or
full; 1000BASE-T: full only
Supports a maximum of 7 autosensing
10/100 ports plus 1 autosensing
10/100/1000 ports
7.93(w) x 4.65(d) x 1.73(h) in
(20.14 x 11.81 x 4.39 cm) (1U height)
0.77 lb (.35 kg)
128 MB RAM, 8 MB flash;
packet buer size: 512 KB
wall, desktop, and under-table mounting
< 3.3 µs (64-byte packets)
up to 2.5 Mpps
3.4 Gbps
8000 entries
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Frequency
Maximum heat dissipation
AC voltage
Current
Maximum power rating
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 140°F (60°C)
up to 10,000 ft (3 km)
Power: 0 dB no fan
50/60 Hz
100 - 127 / 200 - 240 VAC
.4/.3 A
22 W
Notes
Maximum power rating and maximum
heat dissipation are the worst-case
theoretical maximum numbers provided
for planning the infrastructure with
fully loaded PoE (if equipped), 100%
traic, all ports plugged in, and all
modules populated.
32°F to 113°F (0°C to 45°C)
15% to 95% @ 104°F (40°C),
noncondensing
-40°F to 158°F (-40°C to 70°C)
15% to 90% @ 149°F (65°C),
noncondensing
up to 10,000 ft (3 km)
Power: 22 dB single fan
50/60 Hz
204 BTU/hr (215.22 kJ/hr)
100 - 127 / 200 - 240 VAC
0.9/0.5 A
60 W
Maximum power rating and maximum
heat dissipation are the worst-case
theoretical maximum numbers provided
for planning the infrastructure with
fully loaded PoE (if equipped), 100%
traic, all ports plugged in, and all
modules populated.
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 140°F (60°C)
up to 10,000 ft (3 km)
Power: 0 dB no fan
50/60 Hz
100 - 240 VAC
.5 A
4.8 W
Maximum power rating and maximum
heat dissipation are the worst-case
theoretical maximum numbers provided
for planning the infrastructure with
fully loaded PoE (if equipped), 100%
traic, all ports plugged in, and all
modules populated.
Data sheet
SPECIFICATIONS HPE 1810-24G v2 Switch (J9803A) HPE 1810-48G Switch (J9660A) HPE 1810-8 v2 Switch (J9800A)
Page 5
Safety UL 60950-1; IEC 60950; EN 60950 CSA 22.2 No. 60950; EN 60950/
Emissions EN 55022 Class A; CISPR 22 Class A; VCCI V-3;
Immunity
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
Management Web browser Web browser Web browser
Notes Use only supported genuine HPE
Services
FCC (CFR 47, Part 15) Subpart B Class A;
VCCI V-4
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2
EN 61000-3 -3
mini-GBICs with your switch.
Refer to the Hewlet t Packard
Enterprise website at
hpe.com/networking/services for
details on the service-level descriptions
and product numbers. For details about
services, and response times in your area,
please contact your local Hewlett Packard
Enterprise sales oice.
IEC 60950; UL 60950
EN 55022 Class A; CISPR 22 Class A; VCCI V-3;
FCC (CFR 47, Part 15) Subpart B Class A;
VCCI V-4
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2
EN 61000-3 -3
Use only supported genuine HPE
mini-GBICs with your switch.
Refer to the Hewlet t Packard
Enterprise website at
hpe.com/networking/services for
details on the service-level descriptions
and product numbers. For details about
services, and response times in your area,
please contact your local Hewlett Packard
Enterprise sales oice.
UL 60950-1; IEC 60950; EN 60950
EN 55022 Class A; CISPR 22 Class A; VCCI
V-3; FCC (CFR 47, Part 15) Subpart B
Class A;
VCCI V-4
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2
EN 61000-3 -3
Use only supported genuine HPE
mini-GBICs with your switch.
Refer to the Hewlet t Packard
Enterprise website at
hpe.com/networking/services for
details on the service-level descriptions
and product numbers. For details about
services, and response times in your
area, please contact your local Hewlett
Packard Enterprise sales oice.
Data sheet
HPE 1810 Switch Series
SPECIFICATIONS HPE 1810-24 v2 Switch (J9801A) HPE 1810-8G v2 Switch (J9802A)
Page 6
I/O ports and slots 22 RJ-45 autosensing 10/100 ports
Physical characteristics
Dimensions
Weight
Memory and processor 128 MB RAM, 8 MB flash; packet buer size: 512 KB 128 MB RAM, 8 MB flash; packet buer size: 512 KB
Mounting and enclosure Mounts in an EIA-standard 19 in. telco rack (hardware
Performance
100 Mb Latency
1000 Mb Latency
Throughput
Switching capacity
MAC address table size
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX); Duplex: half or full
2 RJ-45 autosensing 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802. 3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
2 SFP 100/1000 Mbps ports
Supports a maximum of 22 autosensing 10/100 ports
plus 2 autosensing 10/100/1000 ports plus 2 SFP ports
12.99(w) x 6.81(d) x 1.73(h) in (32.99 x 17.3 x 4.39 cm)
(1U height)
2.2 lb (1 kg)
included); horizontal surface, wall, and under-table
mounting
< 3.4 µs (64-byte packets)
up to 9.2 Mpps
12.4 Gbps
8000 entries
8 RJ-45 autosensing 10/100/1000 ports
(IEEE 802.3 Type 10BASE-T, IEEE 802.3u
Type 100BASE-TX, IEEE 802.3ab Type 1000BASE-T);
Duplex: 10BASE-T/100BASE-TX: half or full;
1000BASE-T: full only
Supports a maximum of 8 autosensing 10/100/1000 ports
7.93(w) x 4.65(d) x 1.73(h) in (20.14 x 11.81 x 4.39 cm)
(1U height)
0.84 lb (.38 kg)
wall, desktop, and under-table mounting
< 3.3 µs (64-byte packets)
< 2.3 µs (64-byte packets)
up to 11.9 Mpps
16 Gbps
8000 entries
Environment
Operating temperature
Operating relative humidity
Nonoperating/Storage temperature
Nonoperating/Storage relative humidity
Altitude
Acoustic
Electrical characteristics
Frequency
AC voltage
Current
Maximum power rating
Safety UL 60950-1; IEC 60950; EN 60950 UL 60950-1; IEC 60950; EN 60950
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 140°F (60°C)
up to 10,000 ft (3 km)
Power: 0 dB no fan
50/60 Hz
100 - 127 / 200 - 240 VAC
.4/.3 A
22 W
Notes
Maximum power rating and maximum heat dissipation
are the worst-case theoretical maximum numbers
provided for planning the infrastructure with fully
loaded PoE (if equipped), 100% traic, all ports plugged
in, and all modules populated.
32°F to 104°F (0°C to 40°C)
15% to 95% @ 104°F (40°C)
-40°F to 158°F (-40°C to 70°C)
15% to 95% @ 140°F (60°C)
up to 10,000 ft (3 km)
Power: 0 dB no fan
50/60 Hz
100 - 240 VAC
.5 A
7.2 W
Maximum power rating and maximum heat dissipation are
the worst-case theoretical maximum numbers provided
for planning the infrastructure with fully loaded PoE
(if equipped), 100% traic, all ports plugged in, and all
modules populated.
Data sheet
SPECIFICATIONS HPE 1810-24 v2 Switch (J9801A) HPE 1810-8G v2 Switch (J9802A)
Page 7
Emissions EN 55022 Class A; CISPR 22 Class A; VCCI V-3; FCC
Immunity
ESD
Radiated
EFT/Burst
Surge
Conducted
Power frequency magnetic field
Voltage dips and interruptions
Harmonics
Flicker
Management Web browser Web browser
Notes Use only supported genuine HPE mini-GBICs with
Services
(CFR 47, Part 15) Subpart B Class A; VCCI V-4
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2
EN 61000-3 -3
your switch.
Refer to the Hewlet t Packard Enterprise website at
hpe.com/networking/services for details on the
service-level descriptions and product numbers. For
details about services, and response times in your area,
please contact your local Hewlett Packard Enterprise
sales oice.
EN 55022 Class A; CISPR 22 Class A; VCCI V-3; FCC
(CFR 47, Part 15) Subpart B Class A; VCCI V-4
IEC 61000-4-2
IEC 61000-4-3
IEC 61000-4-4
IEC 61000-4-5
IEC 61000-4-6
IEC 61000-4-8
IEC 61000-4-11
EN 61000-3-2
EN 61000-3 -3
Use only supported genuine HPE mini-GBICs with
your switch.
Refer to the Hewlet t Packard Enterprise website at
hpe.com/networking/services for details on the
service-level descriptions and product numbers. For details
about services, and response times in your area, please
contact your local Hewlett Packard Enterprise sales oice.
STANDARDS AND PROTOCOLS
(applies to all products in series)
Denial of service protection CPU DoS Protection
General protocols IEEE 802.1p Priority
IEEE 802.1Q VLANs
Network management IEEE 802.1AB Link Layer Discovery
IEEE 802.3ad Link Aggregation Control
Protocol (LACP)
IEEE 802.3x Flow Control
Protocol (LLDP)
RFC 1534 DHCP/BOOTP Interoperation
RFC 2030 Simple Net work Time Protocol
(SNTP) v4
Data sheet
HPE 1810 Switch Series accessories
Cables HPE 0.5 m Multi-mode OM3 LC/LC Optical Cable (AJ833A)
Mounting kit HPE X410 1U Universal 4-post Rack Mounting Kit (J9583A)
HPE 1 m Multi-mode OM3 LC/LC Optical Cable (AJ834A)
HPE 2 m Multi-mode OM3 LC/LC Optical Cable (AJ835A)
HPE 5 m Multi-mode OM3 LC/LC Optical Cable (AJ836A)
HPE 15 m Multi-mode OM3 LC/LC Optical Cable (AJ837A)
HPE 30 m Multi-mode OM3 LC/LC Optical Cable (AJ838A)
HPE 50 m Multi-mode OM3 LC/LC Optical Cable (AJ839A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 1m Cable (QK732A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 2m Cable (QK733A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 5m Cable (QK734A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 15m Cable (QK735A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 30m Cable (QK736A)
HPE Premier Flex LC/LC Multi-mode OM4 2 fiber 50m Cable (QK737A)
Learn more at
hpe.com/networking
Sign up for updates
Rate this document
© Copyright 2009–2014, 2016 Hewlett Packard Enterprise Development LP. The information contained herein is subject to change
without notice. The only warranties for Hewlett Packard Enterprise products and services are set forth in the express warranty
statements accompanying such products and services. Nothing herein should be construed as constituting an additional warranty.
Hewlett Packard Enterprise shall not be liable for technical or editorial errors or omissions contained herein.
4AA2-6799ENN, February 2016, Rev. 10
Loading...