The HP StorageWorks 1500 cs Modular Smart Array is a 2Gb Fibre Channel SAN attached 2U controller shelf that connects to both
enterprise-class SCSI and Serial ATA (SATA)disk enclosures. HP recommends SCSI drives for intensive heavy I/O requirements while
SATA drives should only be used in archived, reference, or "near on-line" disk-to-disk backup configurations. This combination
provides customers with a low cost, high capacity storage solution. NOTE: SCSI hard drive options have a three year warranty and
SATA hard drives options have a one year warranty. This solution has been designed as a hardware foundation for which future
solutions can be designed and implemented for investment protection. The MSA1500 cs with up-to-eight attached SATA enclosures
can provide the customer with up to 24 TB (96 - 250 GB SATA disk drives) of native capacity. If the business requires SCSI reliability
then attach up-to-four SCSI enclosures for a raw capacity of 16.8 TB (using 56 - 300 GB SCSI disks). The system supports mixing
SCSI and SATA enclosures.
The MSA1500 cs provides 2 Gb Fibre Channel to the hosts. By utilizing existing SCSI drive enclosures and MSA1000/1500
controller technology and integrating the use of our lowest cost SATA hard drives and enclosures, the MSA1500 cs lowers the total
cost of ownership and extends the customers hardware investments into the future. With lower cost of ownership, customers can now
take advantage of tiered storage capabilities matching up data with appropriate levels of performance, availability and cost of data
storage. The result is lower overall cost without giving up the needs of business applications.
The MSA1500 cs is a member of the HP StorageWorks Modular Smart Array family, delivering industry-leading technology to meet
today's demanding and growing storage needs. These storage solutions offer the best price performance features for direct attach
environments and entry-level and mid-range SAN environments. Each solution is designed to maximize transfer rates, reduce
management costs, while driving rapid return on investment.
The MSA1500 cs can be remotely managed by using management tools such as HP Insight Manager, Array Configuration Utility
and the HP StorageWorks Fabric Switch Management Utility depending on the host's operating system.
What's New
What's New
What's NewWhat's New
Updating both of the MSA1500 cs SAN Starter Kits and the MSA1500 SAN Starter Kit HA Bundle to include the new B-series
4Gb HP StorageWorks 4/8 Base SAN Switch and four 4Gb SFPs. The array itself and the included HBAs remain 2Gb.
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 1
Page 2
QuickSpecs
Overview
Models
Models
ModelsModels
HP StorageWorks
HP StorageWorks
HP StorageWorksHP StorageWorks
1500 cs Modular Smart
1500 cs Modular Smart
1500 cs Modular Smart1500 cs Modular Smart
Array
Array
ArrayArray
MSA1500 cs 2U Fibre Channel SAN Attach Controller Shelf
MSA1500 2U Fibre Channel SAN Attach Controller Shelf, with one MSA20 SATA
drive enclosure
NOTE:
NOTE:
NOTE: NOTE:
MSA1500 2U Fibre Channel SAN Attach Controller Shelf, with one MSA30 SCSI drive
enclosure
NOTE:
NOTE:
NOTE: NOTE:
MSA1500 SAN SCSI Starter Kit (Windows, NetWare or Linux compatible)
MSA1500 SAN Starter Kit HA Bundle for Windows, NetWare or Linux (for SAN Starter
Kits)
NOTE:
NOTE:
NOTE: NOTE:
Switch (4) 4Gb SFP transceivers (2) FCA2214 HBAs + cables. Designed as upgrades
for the MSA1500 SAN Starter Kits. Software is needed to enable path failover. This
can be Industry Standard (MPIO for Windows, QLogic for Linux) or HP Secure Path
(available for all three OSs)
Includes (1) MSA1500 (1) MSA30 SCSI drive enclosure (1) 4/8 Base SAN
Includes (1) MSA1500 (1) MSA20 SATA drive enclosure (1) 4/8 Base SAN
For Americas, Asia Pacific, and Japan.
Includes (1) redundant controller; (1) FC I/O module; (1) 4/8 Base SAN
AA986A
AD509A
AD510A
AE327A
AE326A
AE328A
Key Features
Key Features
Key FeaturesKey Features
Ability to mix primary (SCSI) and near-online (SATA) storage behind the same SAN controller for easy to install tiered storage
solutions.
RAID 6 with HP's Advanced Data Guarding technology (RAID ADG)) - Highest level of fault tolerance, allocates two sets of
parity data across drives and allows simultaneous write operations, this level of fault tolerance can withstand two simultaneous
drive failures without downtime or data loss.
2 Gb/1 Gb Fibre connection to host - Supports both 1 Gb and 2 Gb Fibre Channel fabrics to ensure your investment in 1 Gb
infrastructure is protected. Also works with the new 4Gb switches and HBAs at 2Gb speed.
High performance controller(s) built on DAS to SAN (DtS) architecture.
Scalable to eight SATA enclosures for 24 TB or four SCSI enclosures for 16.8 TB of storage capacity with 4- dual channel
SCSI I/O cards.
Ability to hot plug disk enclosures to the controller shelf.
Hot plug expansion and replacement support - Hot plug expansion and replacement of hard drives, redundant controllers, for
simple, fast installation and maintenance. Fans and power supplies are also hot plug replaceable.
Key solution certified for backup and restore, file retention and compliance, replication, write once read many for disk, media
and broadcasting, medical, clustering and archiving. See page 6 for expanded list.
DA - 11945 Worldwide — Version 10 — September 26, 2005
Capability of building an enterprise-class SAN with SCSI reliability by attaching up-to-four MSA30 SCSI-drive enclosures for a
native capacity of 16.8 TB (using 56 - 300 GB SCSI disks)
Low cost, high capacity - For less than $.01 per/MB customers can obtain up to 24 TB of capacity (eight SATA enclosures)
using up to 96 - 250 GB SATA disk drives.
Flexibility - Can choose SATA configuration for secondary storage of data, and/or SCSI configuration for primary storage,
mixing of both technologies behind the same controller is supported but limited to separate SCSI I/O modules.
Ability to utilize a tiered storage approach as data values decrease, choosing the right disk technology for your data storage.
Investment Protection - the ability to upgrade from the MSA1000 to the MSA1500 cs. Remove the controllers from the
MSA1000 and place them into the controller bays in the MSA1500 cs and upgrade the firmware. (Requires purchase of one
MSA1500 FC I/O Module per moved controller)
DA - 11945 Worldwide — Version 10 — September 26, 2005
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 4
Page 5
QuickSpecs
Product Highlights
Product Technology
Product Technology
Product TechnologyProduct Technology
Modular Chassis
Modular Chassis
Modular ChassisModular Chassis
enclosures on 4 dual channel SCSI I/O cards, or 4 single channel SCSI enclosures, redundant
controllers, 2 Gb Fibre Channel I/O modules, fans and power supplies.
Scalability
Scalability
ScalabilityScalability
enclosures or up to 24 TB storage capacity utilizing 96 SATA hard drives and eight MSA20 SATA
enclosures.
Performance
Performance
Performance Performance
Gb interconnects and Fibre Channel technology. Performance tests indicate a transmission rate of up to
30,000 IOPs and bandwidth of up to 200 MB per second.
Fault Tolerance
Fault Tolerance
Fault Tolerance Fault Tolerance
level of fault tolerance. It allocates two sets of parity data across drives and allows simultaneous write
operations. This level of fault tolerance can withstand two simultaneous drive failures without downtime
or data loss.
DtS Architecture
DtS Architecture
DtS Architecture DtS Architecture
feature that provides a quick and easy way to migrate stored data on SCSI disks protected by most Smart
Array controllers to a MSA1000 or MSA1500 cs storage system.
- The modular design of the MSA1500 controller shelf supports up to eight SATA
- up to 16.8 TB storage capacity utilizing 56 SCSI hard drives and four MSA30 SCSI
- The MSA1500 cs and its components have been designed using the latest in standard 2
- RAID 6 with HP's Advanced Data Guarding technology (RAID ADG). This is the highest
- DtS (Direct Attach to SAN) architecture is an exclusive MSA1000 and MSA1500 cs
Pre-Failure Warranty
Pre-Failure Warranty
Pre-Failure WarrantyPre-Failure Warranty
Insight Manager are supported by a Pre-Failure (replacement) Warranty.
NOTE:
NOTE:
NOTE: NOTE:
StorageWorks disk enclosure before they actually fail when using Insight Manger.
NOTE:
NOTE:
NOTE: NOTE:
Integrated Configuration and Management Tools - The MSA1500 cs utilizes a standard, integrated set of
management and utility software. These tools consistently lower the cost of ownership by reducing
training and technical expertise necessary to install and maintain the MSA1500 cs.
Hot Plug Expansion and Replacement Support
Hot Plug Expansion and Replacement Support
Hot Plug Expansion and Replacement Support Hot Plug Expansion and Replacement Support
replacement of redundant controllers, fans, power supplies, Serial ATA and SCSI disk enclosures, and
I/O cards for simple, fast installation and maintenance.
Pre-Failure Warranty allows for the replacement of designated SCSI drives in an HP
Some operating systems may not support all of these features.
- Enclosures and hard drives attached to an MSA1500 cs and monitored under
- The MSA1500 cs supports hot plug expansion and
DA - 11945 Worldwide — Version 10 — September 26, 2005
The MSA1500 cs utilize a single, consistent set of utility software for storage and RAID management,
setup, configuration and troubleshooting. This consistency reduces the cost of ownership by reducing the
training and technical expertise necessary to install and maintain your HP storage solution. Not all
operating systems allow use of all of these tools.
Provides a graphical view of HP drive array configurations
Easy to use Wizards for configuration
ACU supports on-line configuration
Web Based ACU supports On-Line, Remote Web Based and Off-line configuration
Built-in to the controller firmware and controlled via ACU
Allows setting of access rights to the MSA1500 cs storage by hosts
Access control can be set up to a logical volume level using the Array Controller Utility
Powerful storage, server and server option management tool
Monitor storage from a remote central location
Browser based, provides full access from anywhere on the Intranet, eliminating the need for a
dedicated Insight Manager management console
HP's extensive compatibility testing program assures that your HP StorageWorks MSA1500 cs works with leading servers, operating
systems, and backup applications - and not just those sold by HP. The MSA1500 cs works seamlessly in many environments, making
them especially suitable if you have a mixed system environment. For the latest list of servers, workstations, operating systems, and
backup software that supports the MSA1500 cs, check the Modular Smart Array compatibility pages on our web site at:
http://www.hp.com/go/MSA1500cs
HP Server Compatibility
HP Server Compatibility
HP Server CompatibilityHP Server Compatibility
The HP StorageWorks MSA1500 cs supported on the following servers:
Supports most 32-bit ProLiant servers including BL20P G2, BL20P G3, BL25P, BL30P, BL35P, BL40P,
NOTE: NOTE:
all models. Supports most multi-vendor industry standard 32-bit Intel-based (x86) and Opteron servers.
.
Certification of new ProLiant & Integrity server models is ongoing. Not all OSes are supported on
OS Support
OS Support
OS SupportOS Support
HP-UX support
HP-UX support
HP-UX supportHP-UX support
(specific guidelines)
Microsoft Windows Enterprise Edition 2003 (32 & 64-bit)
Microsoft Windows Standard Edition 2003 (32 & 64-bit)
Microsoft Windows 2000 Server Edition (32 & 64-bit)
Microsoft Windows 2000 Advanced Server (sp4) (32 & 64-bit)
HP-UX 11.11, and 11.23 (single controller in homogeneous environments only, see below)
Red Hat Linux Enterprise Advanced Server 2.1 and Enterprise Linux 3.0 (32 & 64-bit) & 4.0 (32-bit
& 64-bit )SuSE Linux SLES8 and SLES9 (32 & 64-bit )
Netware v5.1 and 6.5
The optional second controller can be used with all listed operating systems except HP-UX as a passive,
fail-over device. Presently HP-UX is only supported in a single controller configuration.
Please refer to compatibility matrix at
support.
The MSA1000 for HP-UX supports single controller configurations only. HP-UX support is of a
homogeneous nature. Command Line Interface (CLI) is used for configuration and Event Monitoring
Service (EMS) for monitoring. Root/Boot/Dump/Swap/Install is also supported. PV Links is supported for
multi (HBA) path / single controller (2 HBAs) configurations. HP-UX support is now enabled with the
standard firmware that ships with the MSA1000.
Command Line Interface (CLI) is used for configuration and Event Monitoring Service (EMS) for
monitoring.
Root/Boot/Dump/Swap/Install is also supported.
PV Links is supported for multi (HBA) path / single controller (2 HBAs) configurations.
Fabric, hub and direct Connect are supported
HP-UX 11.11 & 11.23, PA-RISC and Itanium
http://www.hp.com/go/msa1500cs
for complete configuration
DA - 11945 Worldwide — Version 10 — September 26, 2005
Polyserve - Matrix Server for Windows
Microsoft Cluster Server
SteelEye LifeKeeper for Linux Certification
Netware Clustering (SCSI Only)
HP Data Protector
VERITAS Backup Exec and NetBackup
Legato NetWorker for Windows
Computer Associates BrightStor Enterprise Backup
ADIC StorNext for Windows, Linux
KOM Networks KOMworx
NOTE:
NOTE:
Supports Write Once Read Many (WORM) on disk.
NOTE:NOTE:
HP File System Extender
CommVault QiNetix Data Migrator
Princeton Softech Archive for Servers
Bycast StorageGRID
HP Storage Mirroring for Windows
HP Virtual Replicator for Windows
Microsoft Virtual Server
VMware
http://www.hp.com/go/msa1500cs
for more information.
Optional Software
Optional Software
Optional SoftwareOptional Software
HP OpenView Storage
HP OpenView Storage
HP OpenView StorageHP OpenView Storage
Virtual Replicator
Virtual Replicator
Virtual ReplicatorVirtual Replicator
Storage Virtual Replicator combines a rich set of innovative capabilities that enhances and simplifies
storage management for Windows Server 2003 and Windows 2000 environments. Through
virtualization, online volume growth, snapshot and management features, the software complements the
capabilities within the operating system. HP OpenView Storage Virtual Replicator enables simplification
of storage configuration, management, scalability and enhanced availability with e-mail notification for
event customization, enhanced pool deletion that enables deletion of pool or disk containing snapshots,
enhanced policy descriptions for easier identification. Support is for Windows 2000 and Windows Server
2003.
Virtualization
Virtualization
VirtualizationVirtualization
or clustered systems to use. Multiple virtual disks, up to 2 terabyte in size, can be created from a
pool for users and their applications. Existing storage units with production data can be imported
into a pool. The data partition is preserved as a virtual disk and unused capacity is added to the
pool.
Online volume growth
Online volume growth
Online volume growth Online volume growth
administrator to grow an existing volume on virtual disks and Windows 2000 basic disk. The
system will remain online, and the data on the volume will remain intact.
Snapshots
Snapshots
Snapshots Snapshots
Enable instant creation of multipurpose virtual replicas of production data without the requirement
of a physical copy Snapshots identical to ordinary physical disks, with both read and write
capability. Snapshots can remain online for restore operations, testing, and data mining. Full
interoperability with the Windows Server 2003 Volume Shadow-copy Service (VSS).
E-mail notification
E-mail notification
E-mail notificationE-mail notification
Enhanced pool deletion
Enhanced pool deletion
Enhanced pool deletionEnhanced pool deletion
virtual disk that contains snapshots with the DELTREE command.
Interoperability with OpenView Storage Mirroring
Enhanced policy descriptions
Enhanced policy descriptions
Enhanced policy descriptionsEnhanced policy descriptions
identification. Please refer to the Optional Software section of this document or visit
- multiple storage arrays can be consolidated into a pool of disk space for individual
- Enables easy, non-disruptive growth with zero downtime. Allows a system
- Instant, point-in-time snapshots for backup, online restore, testing or data mining.
- customization of events for servers under your span of control.
- delete a pool that contains snapshots and virtual disks or delete a
- the policy key descriptions have been updated for easier
DA - 11945 Worldwide — Version 10 — September 26, 2005
HP StorageWorks Secure Path is a family of high availability multi-pathing software products providing
continuous data access from the HP RAID Array to host servers running the Windows Server 2003,
Windows 2000, and Linux operating systems.
Redundant hardware, advanced RAID technology and Secure Path's automated failover capability are
used to enhance fault tolerance and availability. Secure Path effectively eliminates controllers, disk drives,
interconnect hardware and host bus adapters as single points of failure in the storage subsystem.
The attachment of non-Secure Path (single HBA) servers to a MSA1500 cs with dual controllers that has
servers with Secure Path (dual HBA) attached is supported where the operating system is Windows or
Netware. Users must realize that in event of a controller fail-over (failure of active controller) the single
path servers will lose access to their data on the MSA1500 cs.
NOTE:
NOTE:
NOTE: NOTE:
have Secure Path installed, regardless of operating systems.
NOTE:
NOTE:
NOTE: NOTE:
Key Features
Key Features
Key FeaturesKey Features
Clustering is rapidly gaining in popularity as users desire a high level of data availability. Many of the old
cluster restrictions that were the product of both hardware and operating systems have been overcome.
While there still remain configuration limits, the result is a new high degree of flexibility both in number of
clusters, mixing clusters with single nodes, and the integration of dissimilar operating systems. Initially
Windows, HP-UX and Linux clusters can be attached to an MSA1500 having both SCSI and SATA drives,
while NetWare clusters currently only support SCSI drives. This is only a restriction in a NetWare clustered
environment.
If Secure Path for Linux is used on any node attached to an MSA1500 cs, all nodes must also
refer to
http://www.hp.com/go/securepath
Maintains connections to storage
Monitors I/O paths and alerts on significant events
Used in Stand alone Configurations, Cluster Configurations, and SAN
configurations
for additional details.
for the latest Secure Path parameters.
For example you may mix three Microsoft (Windows Server 2003, or Windows 2000) clusters and other
individual servers, even doing so in a heterogeneous server operating system environment. Windows
Server 2003 allows a single cluster of up to eight nodes.
Single-path (single controller, non-Secure Path) NetWare clustering has been successfully tested up to a
12-node cluster. NetWare clusters employing Secure Path (dual controller, dual HBAs) are limited to six
nodes. Multiple NetWare clusters (and single servers) may have concurrent access with no limitation
inherent to the MSA1500 cs. Likewise up to a 16-node Linux cluster (single controller, non-Secure Path)
utilizing SteelEye LifeKeeper for Linux clustering software has been tested and is supported. Refer to
http://www.hp.com/go/securepath
The MSA1500 cs has the ability to be configured with thirty-two LUNs. A configuration of twenty attached
servers has been tested and is supported. More commonly, users have had an average of four to eight
nodes. This can be any combination of hosts or clusters with different operating systems (while holding
fast to the guidelines and limits described in the above paragraphs. Performance within these guidelines
is heavily dependent on the actual number of end users and types of applications being employed.
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 9
Page 10
QuickSpecs
Compatibility
HP ProLiant Cluster
HP ProLiant Cluster
HP ProLiant ClusterHP ProLiant Cluster
HA/F200 for Entry Level
HA/F200 for Entry Level
HA/F200 for Entry LevelHA/F200 for Entry Level
SAN
SAN
SANSAN
HP ProLiant Cluster Starter
HP ProLiant Cluster Starter
HP ProLiant Cluster StarterHP ProLiant Cluster Starter
Kit
Kit
KitKit
The ProLiant Cluster F200 for the Entry Level SAN is designed to assist in simplifying the configuration of
cluster solutions that provide high levels of data and applications availability in the Microsoft Windows
Operating System environment through clustering to provide no-single-point-of-failure. The ProLiant
Cluster F200 for the Entry Level SAN supports a two-node cluster based on Microsoft Windows 2000
Advanced Server and two to eight-nodes cluster based on Microsoft Windows Server 2003 Enterprise
Edition operating system, the StorageWorks 1000 Modular Smart Array (MSA1000) and MSA1500 cs, or
Raid Array RA4100 and ProLiant Servers. This solution also supports StorageWorks Secure Path
management software.
ProLiant Cluster HA/F200 for the Entry Level SAN
ProLiant Cluster HA/F200 for the Entry Level SAN (Japan)
The ProLiant Cluster Starter Kit is a ProLiant cluster "How-to-Guide" that includes documentation for
ProLiant Clusters that use StorageWorks MSA1000, MSA1500 cs, RA4100, EVA5000, EVA3000,
MA8000, and EMA12000. The kit also includes multimedia with animation to illustrate the actual
components required to build a Fibre Channel Cluster and two 30-day trial licenses of OpenView
Storage Mirroring.
HP ProLiant Cluster KitHP ProLiant Cluster Kit
with OpenView Mirroring
with OpenView Mirroring
with OpenView Mirroringwith OpenView Mirroring
(Host based)
HP OpenView Storage
HP OpenView Storage
HP OpenView StorageHP OpenView Storage
Mirroring
Mirroring
MirroringMirroring
(Host based)
The ProLiant Cluster Kit with OpenView Storage Mirroring is designed to assist in simplifying the
configuration of cluster solutions for customers that require a cost effective disaster recovery alternative.
This solution provides high levels of data and application availability in the Microsoft Windows
Operating System environment through clustering to provide no-single-point-of-failure. The ProLiant
Cluster Kit with OpenView Storage Mirroring supports a two-node cluster based on Microsoft Windows
2000 Advanced Server and two to eight-nodes cluster based on Microsoft Windows Server 2003
Enterprise Edition operating system, the StorageWorks Modular Smart Array (MSA1000 & MSA1500 cs
with MSA20 or MSA30 attached) and ProLiant Servers. This solution also provides replication capabilities
to make one or more copies of the cluster data. Replication can take place between a cluster and
standalone configuration or between two clusters.
HP ProLiant Cluster Kit with OpenView Mirroring
HP OpenView Storage Mirroring is designed to take small-medium enterprises beyond periodic backup
to provide continuous data protection with minimal data loss and immediate recovery from any disaster
or system outage. Utilizing patented STAR technology, OV Storage Mirroring captures byte-level changes
as they happen and replicates those changes to one or more target servers at any location in the exact
sequence sent by the source. Advanced features put you in control of bandwidth usage, queue data
changes for replication during off-peak hours, enable e-mail, pager or wireless notification when
changes occur and scales organically to meet the need of your environment. OV Storage Mirroring is the
core component to the following solutions: disaster recovery, remote availability, centralized backup,
serverless backup, data distribution, mining and server/storage migration.
364025-B21
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 10
Page 11
QuickSpecs
Compatibility
Supports Microsoft Windows 2000/2003 servers
One-to-one failover/fail back solution for MS-Exchange, MS-SQL and Oracle providing automatic
failover and near instantaneous access to replicated data or use replicated data or rebuild your
local server.
Server Groups - enables the "grouping" of servers on the management console (GUI) allowing
focus on only those servers under your span of control
Continuous, asynchronous byte-level replication with intelligent data compression captures
changes as they occur, ensures sequence of data mirrored on target, and provides userconfigurable compression levels to ensure efficient usage of network resources.
One-to-many and many-to-one host configurations allowing multiple production servers to use the
same target server
HP ProLiant Clusters forHP ProLiant Clusters for
NetWare
NetWare
NetWareNetWare
For more information visit:
HP supports a broad range of solutions for NetWare Cluster services including configurations featuring
the MSA1500 cs and optionally with HP StorageWorks Secure Path. These solutions provide high
availability and maximum resource utilization for NetWare environments from small file sharing
implementations to enterprise business computing. Single-path (single controller, non-Secure Path)
NetWare clusters of up to 12-nodes have been successfully tested. Presently 2-node NetWare clusters
with Secure Path have been tested and approved with larger NetWare cluster testing planned. Multiple
NetWare clusters are allowed.
HP introduces the new Configure to Order program on a limited basis. It is not yet available in all areas. The MSA1500 cs and its
options may or may not be factory installed in a rack with add-on controllers, switches, hubs, MSA20 enclosures, MSA30 enclosures
and hard drives. The MSA1500 cs may be integrated with 64-bit Integrity and PA-RISC servers or ProLiant or as standalone storage.
Configure to Order
Configure to Order
Configure to OrderConfigure to Order
Products Approved for CTO
Products Approved for CTO
Products Approved for CTOProducts Approved for CTO
1500 cs Modular Smart Array
NOTE:
NOTE:
NOTE: NOTE:
integration is indicated.
HP MSA1000 Controller 256 cache ALL
NOTE:
NOTE:
NOTE:NOTE:
integration is indicated.
256 MB Cache Upgrade
NOTE:
NOTE:
NOTE:NOTE:
integration is indicated.
MSA1500 cs Fibre Channel I/O Module
NOTE:
NOTE:
NOTE:NOTE:
integration is indicated.
MSA1500 cs Dual Channel SCSI I/O Module
NOTE:
NOTE:
NOTE:NOTE:
integration is indicated.
0D1 will appear after this part number on your sales order when factory
0D1 will appear after this part number on your sales order when factory
0D1 will appear after this part number on your sales order when factory
0D1 will appear after this part number on your sales order when factory
0D1 will appear after this part number on your sales order when factory
Part Number
Part Number
Part NumberPart Number
AA986A
218231-B22
254786-B21
AA987A
AA988A
NO CTO Available
NO CTO Available
NO CTO AvailableNO CTO Available
MSA1500cs 2U Fibre Channel SAN Attach Controller Shelf, with SATA
MSA1500cs 2U Fibre Channel SAN Attach Controller Shelf, with SCSI
MSA1500 cs upgrade shelf
AD509A
AD510A
AD511A
DA - 11945 Worldwide — Version 10 — September 26, 2005
Service and Support, HP Care Pack, and Warranty Information
Warranty
Warranty
WarrantyWarranty
Warranty Upgrade
Warranty Upgrade
Warranty UpgradeWarranty Upgrade
Options
Options
OptionsOptions
Three-year Limited Warranty for MSA1500, Fibre Channel Cables and SFP Transceivers
3 years parts exchange
1 year labor
1 year on-site
Next business day response
Options for the MSA1500 carry their own warranty. Refer to HP's Limited Warranty Statement for further
details. In countries where available, your HP Limited Warranty includes Customer Self Repair warranty
services. Please refer to HP's Limited Warranty Statement for further details:
Products included in various Kits carry their own individual warranties.
NOTE:
NOTE:
NOTE: NOTE:
SCSI hard drives versus SATA hard drives. SCSI hard drive options have a three year warranty and SATA
hard drives options have a one year warranty.
Reference HP's communication for further details:
The warranty of the hard drive options purchased with the MSA1500 cs product is different for
http://www.hp.com
Response - Upgrade on-site response from next business day to same day 4 hours
Coverage - Extend hours of coverage from 9 hours x 5 days to 24 hours x 7 days
Duration - Select duration of coverage for a period of 1, 3, or 5 years
go to search, enter CN0089W
HP Care Pack Information
HP Care Pack Information
HP Care Pack InformationHP Care Pack Information
HP Care Pack is defined as an upgrade to the product warranty attribute, available for a specific
duration and hours of coverage.
HP Care Pack is not available for less than the product's warranty duration.
HP Care Pack is available for sale anytime during the warranty period for most products, but the
commencement date will be the same as the Warranty Start Date (delivery date to end user
customer). Proof of purchase may be required.
HP Care Pack services are prepaid.
NOTE:
NOTE:
NOTE: NOTE:
for all Service, Warranty Plans, Installation and Startup Services available for the MSA1500
For additional information on Product Services and HP Care Pack, as well as orderable part numbers,
please refer to the URL:
If you have specific questions about availability or how to obtain services contact your local HP
representative. Contact information for your local area can be found at:
Product support provides the customer access to HP's experienced technical support
resources, as well as access to HP's Information Services database for support on a variety of multivendor/multiplatform software products. Product support includes escalation and problem coordination
with the appropriate engineering group. HP Services offer a variety of options to allow you to tailor your
product service to meet the needs of your organization. Basic warranty on products can be uplifted from
day one to ensure you receive the service you need when you need it.
HP warrants only that the software media will be free of physical defects for a period of ninety (90) days
from delivery.
The following services are offered as HP Care Pack Services at the time of software product order:
Software Technical Support 24 x 7 (1 and 3 years) is available 24 hours per day, Monday through
Sunday, including holidays (includes phone-in software technical support 24 x 7 and software
product and documentation updates).
Installation Service (software installation) and Installation and Startup Service (software installation,
configuration, startup testing and knowledge transfer).
HP Care Pack services must be ordered with the product and are prepaid.
For tailored support contracts based on personalized statement of work contact your local support
center via
Software product services included with Secure Path: One year of Software Technical Support 24 x
7 HP Care Pack Services (includes phone-in software technical support 24 x 7 and software
product and documentation updates).
HP Care Pack services are available to upgrade the one year of Software Technical Support 24 x
7 included with the Secure Path product to 3 full years.
Installation service (software installation).
For additional software product services information for HP Care Pack services, as well as orderable part
numbers, please refer to the URLs listed below:
All storage services:
All HP Care Pack Services:
Software Support HP Care Pack Services:
Installation and Startup Services:
If you have specific service questions contact your local HP representative. Contact information for your
local area can be found at:
Maintenance releases, bug fixes and software patches are available at:
Installation services that include basic installation and Array Installation and Startup
On-site maintenance (includes warranty support)
Response time upgrades during the warranty period
Post-warranty coverage or warranty extension
RAID setup and performance consulting via statement of work
Migration service consulting via statement of work
Environmental, Mission Critical Services
For product services information for HP Care Pack services, as well as orderable part numbers, please
refer to the URLs listed below:
All storage services:
All HP Care Pack Services:
Installation and Startup Services:
If you have specific service questions contact your local HP representative. Contact information for your
local area can be found at:
DA - 11945 Worldwide — Version 10 — September 26, 2005
Service and Support, HP Care Pack, and Warranty Information
Array Installation and
Array Installation and
Array Installation andArray Installation and
Startup Services
Startup Services
Startup ServicesStartup Services
SAN Solution Service
SAN Solution Service
SAN Solution ServiceSAN Solution Service
The HP Installation and startup for HP StorageWorks Disk Arrays service package provides installation
and configuration of HP StorageWorks Disk Array products. Service highlights include:
Installation and Startup provides, installation, LUN Disk Design and configuration of the MSA 1500
which includes
Service Planning
Service Deployment
Installation Verification Testing (IVT) required for this service
Customer Orientation session
Service Deployment includes the deployment of the MSA disc array into a new or pre-existing SAN
which may consist of switch, hub or SCSI bridge technology. Installation includes the
customization of up to four host servers, eight host bus adapters (hba's) and up to four high
availability software licenses.
SAN Solution Service covers your entry-level disk array solution with:
Comprehensive SAN implementation strategy and planning
Hardware and software installation and configuration
Integration of the installed disk array in your SAN environment
Firmware verification
SAN testing
Solution handover to your staff
The Array Installation and Startup service is a pre-requisite for the SAN Solution Service.
For more information about he SAN solution service, please visit:
http://www.hp.com/hps/storage/ns_san.html
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 15
Page 16
QuickSpecs
Kit Contents
Model Name
Model Name
Model NameModel Name
MSA1500 cs
MSA1500 cs
MSA1500 csMSA1500 cs
MSA1500 cs with one
MSA1500 cs with one
MSA1500 cs with oneMSA1500 cs with one
SATA drive enclosure
SATA drive enclosure
SATA drive enclosureSATA drive enclosure
MSA1500 cs with one
MSA1500 cs with one
MSA1500 cs with oneMSA1500 cs with one
SCSI drive enclosure
SCSI drive enclosure
SCSI drive enclosureSCSI drive enclosure
MSA1500 SAN SCSI
MSA1500 SAN SCSI
MSA1500 SAN SCSIMSA1500 SAN SCSI
Starter Kit
Starter Kit
Starter KitStarter Kit
MSA1500 SAN SATA
MSA1500 SAN SATA
MSA1500 SAN SATAMSA1500 SAN SATA
Starter Kit
Starter Kit
Starter KitStarter Kit
MSA1500 SAN Starter Kit
MSA1500 SAN Starter Kit
MSA1500 SAN Starter KitMSA1500 SAN Starter Kit
HA Bundle
HA Bundle
HA BundleHA Bundle
(for both SCSI and SATA
SAN Starter Kits)
channel SCSI I/O card, 2- power cables, redundant fans, redundant power supplies,
universal rack-mounting kit, MSA1500 support CD and documentation, serial cable.
NOTE:
NOTE:
NOTE: NOTE:
1- MSA1500 controller shelf base configuration, and 1-MSA20 SATA disk enclosure
base configuration.
NOTE:
NOTE:
NOTE: NOTE:
1- MSA1500 controller shelf base configuration, and 1-MSA30 single-channel SCSI
disk enclosure base configuration.
NOTE: NOTE:
Switch (4) 4Gb SFP transceivers (2) FCA2214 HBAs + cables. User will need to
employ either Secure Path, QLogic failover, or Windows MPIO for path failover
implementation, not included. NetWare requires Secure Path.
MSA1500 controller shelf, 1- dual channel SCSI I/O card, 2- power cables,
redundant fans, redundant power supplies, universal rack-mounting kit, MSA1500
support CD and documentation, serial cable.
NOTE:
NOTE:
NOTE: NOTE:
Channel I/O Module. It is intended for those customers who wish to upgrade from
their MSA1000 to the MSA1500 cs. For each controller added to this shelf, one Fibre
Channel I/O module (PN AA987A) is required.
Step 1 - "Product" - Base ConfigurationStep 1 - "Product" - Base Configuration
Select one:
Select one:
Select one:Select one:
Model Name
Model Name
Model NameModel Name
MSA1500 cs
Step 2 - Required Options (Must Choose Serial ATA or SCSI)
Step 2 - Required Options (Must Choose Serial ATA or SCSI)
Step 2 - Required Options (Must Choose Serial ATA or SCSI)Step 2 - Required Options (Must Choose Serial ATA or SCSI)
Select each required option with quantities specified. *NOTE:
not be used in a heavy or intense I/O environment. Those situations require the use of enterprise-class SCSI drives.
Description with Parts Shipped:
Description with Parts Shipped:
Description with Parts Shipped:Description with Parts Shipped:
Dual Channel SCSI I/O Module (1 ships with base unit, 3 more can be added)
MSA20 - Serial ATA enclosure, SCSI cable, redundant fans and power supplies, power cable
160 GB Serial ATA hard drive, universal carrier
250 GB Serial ATA hard drive, universal carrier
MSA30 - Dual Channel SCSI enclosure, SCSI cable, redundant fans and power supplies,
power cable
MSA30 - Single Channel SCSI enclosure, SCSI cable, redundant fans and power supplies,
power cable
72.8 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
146.8 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
300 GB Pluggable Ultra320 Universal Hard Drive, 10,000 rpm (1")
36.4 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
72.8 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
146.8 GB Pluggable Ultra320 Universal Hard Drive, 15,000 rpm (1")
NOTE:
NOTE:
Two SATA disk enclosures can be attached to one SCSI I/O module. Only one SCSI disk enclosure can be attached to a
NOTE:NOTE:
SCSI I/O module.
NOTE:
NOTE:
It is recommended that the same hard drive capacity (ex. All 250 GB SATA in SATA enclosure or all 146 GB SCSI in SCSI
NOTE:NOTE:
enclosure) be installed in a disk enclosure.
NOTE:
NOTE:
All Ultra320 Universal Hard Drives are backward compatible to U2 or U3 speeds.
NOTE:NOTE:
NOTE:
NOTE:
For complete compatibility information, refer to the Compatibility table located at
NOTE:NOTE:
Model Description:
Model Description:
Model Description:Model Description:
MSA1500 controller shelf, 1-controller, 1- FC module, 1- SFP transceiver, 1- dual
channel SCSI I/O card, 2- power cables, redundant fans, redundant power supplies,
universal rack-mounting kit, MSA1500 cs support CD and documentation, serial
cable.
NOTE:
NOTE: NOTE:
SATA drives are designed for archival or reference data. They should
Quantity
Quantity
QuantityQuantity
Up to 4
Up to 8
Up to 12 per
MSA20 enclosure
Up to 12 per
MSA20 enclosure
Up to 2
Up to 4
Up to 14 per
MSA30 enclosure
Up to 14 per
MSA30 enclosure
Up to 14 per
MSA30 enclosure
Up to 14 per
MSA30 enclosure
Up to 14 per
MSA30 enclosure
Up to 14 per
MSA30 enclosure
http://www.hp.com/go/msa1500cs
Part Number
Part Number
Part NumberPart Number
AA986A
Part Number
Part Number
Part NumberPart Number
AA988A
335921-B21
349238-B21
349239-B21
302970-B21
302969-B21
286714-B22
286716-B22
350964-B22
286776-B22
286778-B22
347708-B22
DA - 11945 Worldwide — Version 10 — September 26, 2005
Must choose optional Power Cord for Non-U.S. Configurations
Must choose optional Power Cord for Non-U.S. Configurations
Must choose optional Power Cord for Non-U.S. ConfigurationsMust choose optional Power Cord for Non-U.S. Configurations
Power Cord, 110/220 VAC, US/Canada/Mexico
NOTE:
NOTE:
Shipped standard with all units.
NOTE:NOTE:
Power Cord, 220/240 VAC, (US/Canada/Mexico)
Power Cord, (Australia/China/New Zealand)
Power Cord, (Central Europe)
Power Cord, (United Kingdom/Hong Kong)
Power Cord, (Switzerland)
Power Cord, (Italy)
Power Cord, (Denmark)
Power Cord, (Japan)
Power Cord, (South East Asia/India)
NOTE:
NOTE:
Redundant configurations require two Host Bus Adapters per server, an additional controller and fibre channel I/O module,
NOTE:NOTE:
and Secure Path software for each server.
Step 3 – Choose Redundant MSA1500 System Options
Step 3 – Choose Redundant MSA1500 System Options
Step 3 – Choose Redundant MSA1500 System OptionsStep 3 – Choose Redundant MSA1500 System Options
Description
Description
DescriptionDescription
MSA Controller
NOTE:
NOTE:
The MSA1500 utilizes the MSA1000 controller with specific firmware
NOTE:NOTE:
256 MB Cache Modules for Controller (one additional for each controller)
NOTE:
NOTE:
The MSA1500 and MSA1000 utilize the same Cache Modules
NOTE:NOTE:
MSA1500 Fibre Channel I/O module
HP StorageWorks Secure Path or an industry standard path failover solution such as Windows
MPIO or QLogic Failover for Linux (appropriate for the operating system)
NOTE:
NOTE:
Redundant configurations require two Host Bus Adapters per server, an additional controller and fibre channel I/O module,
NOTE:NOTE:
redundant switches and cables, and Secure Path software or Industry Standard failover depending on the operating system for each
server.
Quantity
Quantity
QuantityQuantity
Quantity
Quantity
QuantityQuantity
Part Number
Part Number
Part NumberPart Number
2
227099-001
2
227099-002
2
227098-011
2
157215-021
2
157216-031
2
157219-111
2
157217-061
2
157218-081
2
139867-006
2
157220-AR1
Part Number
Part Number
Part NumberPart Number
1
218231-B22
2
254786-B21
1
AA987A
Step 4 – Choose Supported Options For 2 Gb Infrastructure
Step 4 – Choose Supported Options For 2 Gb Infrastructure
Step 4 – Choose Supported Options For 2 Gb InfrastructureStep 4 – Choose Supported Options For 2 Gb Infrastructure
Select each required option with quantities specified.
4 Gb Fibre Channel
4 Gb Fibre Channel
4 Gb Fibre Channel4 Gb Fibre Channel
Fabric "B-Series" family of
Fabric "B-Series" family of
Fabric "B-Series" family ofFabric "B-Series" family of
switches
switches
switchesswitches
Description with Parts Shipped:
Description with Parts Shipped:
Description with Parts Shipped:Description with Parts Shipped:
4 Gb SFP SW Transceiver Kit
HP StorageWorks 4/8 Base SAN Switch 8 port 4Gb/s switch with zero e-ports
HP StorageWorks 4/8 SAN Switch 4Gb/s with full fabric
HP StorageWorks 4/16 SAN Switch
HP StorageWorks 4/16 SAN Switch Power Pack
DA - 11945 Worldwide — Version 10 — September 26, 2005
Part Number
Part Number
Part NumberPart Number
A7446A
A7984A
A8000A
A7985A
A7987A
Page 18
Page 19
QuickSpecs
Configuration Information
2 Gb Fibre Channel
2 Gb Fibre Channel
2 Gb Fibre Channel2 Gb Fibre Channel
Fabric "B-Series" family of
Fabric "B-Series" family of
Fabric "B-Series" family ofFabric "B-Series" family of
switches
switches
switchesswitches
2 Gb Fibre Channel
2 Gb Fibre Channel
2 Gb Fibre Channel2 Gb Fibre Channel
Fabric "M-Series" family of
Fabric "M-Series" family of
Fabric "M-Series" family ofFabric "M-Series" family of
switches
switches
switchesswitches
2 Gb SFP SW Transceiver Kit
HP StorageWorks SAN Switch 2/8V
HP StorageWorks SAN Switch 2/8V Power Pack
HP StorageWorks SAN Switch 2/16V
HP StorageWorks SAN Switch 2/16N
HP StorageWorks SAN Switch 2/16N Power Pack
HP StorageWorks SAN Switch 2/32 Power Pack Upgrade
HP StorageWorks SAN Switch 2/16
HP StorageWorks Edge Switch 2/32
NOTE:
NOTE:
NOTE: NOTE:
8-FlexPort upgrade for Edge 2/32
HP StorageWorks Edge Switch 2/24
NOTE:
NOTE:
NOTE: NOTE:
8-FlexPort upgrade for Edge 2/24
HP StorageWorks Edge Switch 2/12
FCA2214 Host Adapter (Linux, Microsoft 32-bit, Netware)
FCA2214DC Host Adapter (Linux, Microsoft OS 32-bit, Netware) dual channel
Windows 32-bit single channel PCI-X (Windows Server 2003, W2K)
Windows 32-bit dual channel PCI-X (Windows Server 2003, W2K)
Host Adapter for Windows Server 2003 64-bit, Integrity servers
Host adapter PCI-X Dual channel for HP-UX and Linux, Integrity servers
HP-UX HBA: PCI 2GB Fibre Channel Adapter
HP-UX HBA: PCI-X 2Gb Fibre Channel/1000Base-T
HP-UX HBA: PCI-X 2Gb Fibre Channel/1000Base-SX
2Gb PCI-e for 32-bit Windows
Host Adapter for Windows Server 2003 64-bit, Integrity servers, single channel 2 Gb
PCI-X
Host Adapter for Windows Server 2003 64-bit, Integrity servers, dual channel 2 Gb
PCI-X
Host adapter Q2300 64-bit PCI-X for Linux, Integrity servers
10842 (800 mm wide, 42U) Rack Cabinet - Shock Pallet
NOTE:
NOTE:
It is mandatory to use a shock pallet in order to ship racks with equipment
NOTE:NOTE:
installed.
Rail Kit for mounting in a M-Series rack
42U EVA cab 60Hz
36U EVA cab 60Hz
22U EVA cab 60Hz
42U EVA cab 50 Hz
36U EVA cab 50 Hz
22U EVA cab 50 Hz
HP9000 Std Rack System E25
HP Rack System/E, 33U, quartz color
HP Rack System/E, 33U, graphite color
HP Rack System/E, 41U, quartz color
HP Rack System/E, 41U, graphite color
2.5m (8.2') 10A, IEC C 13 to IEC C14 PDU Jumper Cable (1 per pack)
3.0m (9.8') 10A, IEC C 13 to IEC C14 PDU Jumper Cable (1 per pack)
1.4m (4.5') 10A, IEC C 13 to IEC C14 PDU Jumper Cable (1 per pack)
Step 6– Choose HP Care Pack ServicesStep 6– Choose HP Care Pack Services
Hardware Product
Hardware Product
Hardware ProductHardware Product
Services
Services
ServicesServices
1 Yr 4hr 24x7/Onsite
1 Yr 4hr 13x5/Onsite
1 Yr 6 hr CTR
3 Yr next Day/Onsite
3 Yr 4hr 13x5 /Onsite
3 Yr 4hr 24x7 /Onsite
3 Yr 6 hr CTR
Hardware Installation
Installation and Startup
Flexible Care Pack Part Numbers:
1 Yr 4hr 13x5 Hardware
1 Yr 4h 24x7 Hardware
1 Yr 6 hr CTR
1 Yr Support Plus
1 Yr Support Plus 24
1 Yr Proactive 24
1 Year Critical Services
3 yr Next Day
3 Yr 4hr 13x5 Hardware
3 Yr 4hr 24x7 Hardware
3YR 6hr CTR
3Yr Support Plus
3 Yr Support Plus 24
3 Yr Proactive 24
3 Year Critical Services
4 year Next Day
4 Yr 4hr 13x5 Hardware
4 Yr 4h 24x7 Hardware
4 Yr 6 hr CTR
4 Yr Support Plus
4 Yr Support Plus 24
4 Yr Proactive 24
4 Year Critical Services
5 Yr Support Plus
5 Yr Support Plus 24
5 Yr Proactive 24
5 Year Critical Services
Hardware Installation
Installation and Startup Service
Secure Path v4.0C (SP1)Secure Path v4.0C (SP1)
for Windows Workgroup
for Windows Workgroup
for Windows Workgroupfor Windows Workgroup
Edition (including
Edition (including
Edition (includingEdition (including
Windows Server
Windows Server
Windows ServerWindows Server
2003/32-bit and 64-bit)
2003/32-bit and 64-bit)
2003/32-bit and 64-bit)2003/32-bit and 64-bit)
1 System LTU
3 System LTU
5 System LTU
10 System LTU
Base Media and Documentation Kit (license required)
1 System LTU upgrade:
3 System LTU upgrade:
5 System LTU upgrade:
10 System LTU upgrade:
1 System LTU upgrade Japan
Secure Path v4.0C for Windows Workgroup one license
Secure Path v4.0C for Windows Workgroup Edition five licenses
Secure Path v4.0C for Windows Workgroup Edition 10 licenses
Secure Path v4.0C for Windows Workgroup Edition 25 licenses
Secure Path v4.0C for Windows Workgroup Edition 50 licenses
Secure Path v4.0C for Windows Workgroup Edition Upgrade License
Secure Path v4.0C for Windows Workgroup Edition for ProLiant BL line 8 licenses
NOTE:
NOTE:
At present 64-bit Windows with Secure Path can operate in a homogenous
NOTE:NOTE:
configuration of multiple (up to 5) 2-node clusters.
Secure Path v3.0C forSecure Path v3.0C for
Linux Workgroup Edition
Linux Workgroup Edition
Linux Workgroup EditionLinux Workgroup Edition
Qlogic Failover Driver for
Qlogic Failover Driver for
Qlogic Failover Driver forQlogic Failover Driver for
Linux
Linux
LinuxLinux
Windows MPIO Failover
Windows MPIO Failover
Windows MPIO FailoverWindows MPIO Failover
Driver
Driver
DriverDriver
Secure Path v3.0C for Linux Workgroup Edition one license
Secure Path v3.0C for Linux Workgroup Edition five licenses
Secure Path v3.0C for Linux Workgroup Edition 10 licenses
Secure Path v3.0C for Linux Workgroup Edition 25 licenses
Secure Path v3.0C for Linux Workgroup Edition 50 licenses
NOTE:
NOTE:
NOTE: NOTE:
parameters for Linux
Provides a no cost multi-path solution for Linux when using specific QLogic Host Bus Adapters
For more information visit
or
Provides a single multi-path solution for Windows
For more information visit
or
Refer to
http://www.qlogic.com
Microsoft Windows 2000 and Windows Server 2003 (32bit and 64bit) operating systems
DSM driver is required from HP for operation and configuration:
System heartbeat
System UID
Power On/Standby
Fault detected in enclosure
System UID
SCSI Module Power indicator (1 per SCSI I/O module)
SCSI Activity (1 per SCSI I/O module)
Fibre Channel I/O card status (1 per Fibre I/O module)
Fibre channel link status (2 per Fibre I/O module)
Power supply status (1 per power supply)
Fan Module status (1 per fan module)
Ultra3 SCSI to Hard Drives
2 Gb Fibre Channel to Hosts
96 SATA hard drives in 8 MSA20 SATA enclosure or 56 SCSI hard drives in
4 MSA30 enclosures
Operating
Operating
OperatingOperating
Operating
Operating
OperatingOperating
Non-operating
Non-operating
Non-operatingNon-operating
Rated Input Voltage
Rated Input Voltage
Rated Input VoltageRated Input Voltage
Rated Input Frequency
Rated Input Frequency
Rated Input FrequencyRated Input Frequency
Rated Input Current
Rated Input Current
Rated Input CurrentRated Input Current
Input Power
Input Power
Input Power Input Power
The supply will handle 90Vrms - 254 Vrms (100 - 240 V, +6%, -10%)
Frequency is 47 - 63 Hz
NOTE:
NOTE:
NOTE:NOTE:
and apply to worst-case conditions at full rated power supply load. The
power/heat dissipation for your installation will vary depending on the
equipment configuration.
2U Rack Form Factor
2U Rack Form Factor
2U Rack Form Factor2U Rack Form Factor
Shipping Packaging
Shipping Packaging
Shipping PackagingShipping Packaging
Shipping Packaging
Shipping Packaging
Shipping PackagingShipping Packaging
Shipping Packaging
Shipping Packaging
Shipping PackagingShipping Packaging
(max)
Input Power and Heat Dissipation specifications are maximum values
50° to 95° F (10° to 35° C) up to 8000'
-22° to 122° F (-30° to 50° C)
10% to 90%
Up to 95%
100 to 240 VAC
47 to 63 Hz
6.4A Max, 1A typical
400W Max, 95W typical
Dimensions
Dimensions
DimensionsDimensions
Weight
Weight
WeightWeight
Dimensions
Dimensions
DimensionsDimensions
Weight
Weight
WeightWeight
Dimensions
Dimensions
Dimensions Dimensions
Weight
Weight
WeightWeight
Dimensions
Dimensions
Dimensions Dimensions
Weight
Weight
WeightWeight
Dimensions
Dimensions
Dimensions Dimensions
Weight
Weight
WeightWeight
Dimensions
Dimensions
DimensionsDimensions
Weight
Weight
WeightWeight
(H x W x D)
(L x W x D)
(Gross)
(H x W x D)
(H x W x D)
(Gross)
(H x W x D)
(H x W x D)
(Gross)
3.46 x 19.06 x
24.32
55 lbs
32.50 x 11.25 x
34.06
68 lbs
3.2 x.92 x 14.62
1.01 lbs
19.88 x 9.06 x 2.76
1.93 lbs
3.2 x .92 x 14.62
.96lbs
19.88 x 9.0 6 x 2.76
1.87lbs
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 24
Page 25
QuickSpecs
Technical Specifications
User Interface
User Interface
User InterfaceUser Interface
Electrical Interface
Electrical Interface
Electrical InterfaceElectrical Interface
Protocol Support
Protocol Support
Protocol SupportProtocol Support
SCSI Ports
SCSI Ports
SCSI PortsSCSI Ports
Maximum Capacity
Maximum Capacity
Maximum CapacityMaximum Capacity
Logical Drives
Logical Drives
Logical DrivesLogical Drives
Maximum Logical Drive
Maximum Logical Drive
Maximum Logical DriveMaximum Logical Drive
size
size
sizesize
Modular SAN Array 1000
Modular SAN Array 1000
Modular SAN Array 1000Modular SAN Array 1000
Controller
Controller
ControllerController
User Interface
User Interface
User InterfaceUser Interface
Electrical Interface
Electrical Interface
Electrical InterfaceElectrical Interface
Protocol Support
Controller display with Status Indicators (2) and push buttons (4) on front of
controller
LVD (Low Voltage Differential)
Wide Ultra3 SCSI
2-ports per SCSI I/O card, up to 4 cards total
24 TB with 96- 250 GB SATA HDD, or 16.8 TB with 56-300 GB SCSI HDD
Up to 32 Logical Drives
2.0 TB
Controller Display with Status Indicators (2) and Push Buttons (4)
Status Indicators on front of Controller (16)
LVD (Low Voltage Differential)
Wide Ultra3 SCSI (160 MB/s per channel)
RAID 6 with HP's Advanced Data Guarding technology (RAID ADG)
RAID 5 (Distributed Data Guarding)
RAID 1 + 0 (Mirroring + Stripping)
RAID 0 (Stripping)
Up to 512 MB Read/Write (256 MB modules). If redundant controllers are
used they must have equally configured cache
ECC protection, battery-backed, and removable
Standard as of November 19, 2002: 256 MB cache memory (single
module)
Up to three days of redundant battery life, removable for easy replacement
2 MB flashable ROM
HP Ultra 320, Ultra3, and Ultra2 SCSI 1-inch Universal drives
Dimensions
Dimensions
DimensionsDimensions
Weight
Weight
WeightWeight
(L x W x D)
(Gross)
15.5 x 12.0 x 3.25
2.5 lb
Modular SAN Array Fibre
Modular SAN Array Fibre
Modular SAN Array FibreModular SAN Array Fibre
Channel I/O Module
Channel I/O Module
Channel I/O ModuleChannel I/O Module
Connector Type
Connector Type
Connector TypeConnector Type
Number of Fibre Channel
Number of Fibre Channel
Number of Fibre ChannelNumber of Fibre Channel
Ports
The information contained herein is subject to change without notice.
Microsoft and Windows NT are US registered trademarks of Microsoft Corporation. Intel is a US registered trademark of Intel
Corporation. Unix is a registered trademark of The Open Group.
The only warranties for HP products and services are set forth in the express warranty statements accompanying such products and
services. Nothing herein should be construed as constituting an additional warranty. HP shall not be liable for technical or editorial
errors or omissions contained herein.
Cable Type
Cable Type
Cable TypeCable Type
Available Cable Lengths
Available Cable Lengths
Available Cable LengthsAvailable Cable Lengths
Packaging
Packaging
PackagingPackaging
LC-LC (2 Gb to 2 Gb connections) and LC-SC (2 Gb to 1 Gb connections)
50 Micron multi-mode Fiber
6.5 ft, 16.4 ft, and 49.2 ft (2 m, 5 m, and 15 m)
Dimensions
Dimensions
DimensionsDimensions
Weight
Weight
WeightWeight
(L x W x D)
(Gross)
11.5 x 9 x 1.5 in (29.2 x 22.8 x 3.8 cm)
0.75 to 1 lb (0.34 to 0.45 kg)
DA - 11945 Worldwide — Version 10 — September 26, 2005
Page 26
Loading...
+ hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.