This manual and any examples contained herein are provided “as is” and
are subject to change without notice. Hewlett-Packard Company makes no
warranty of any kind with regard to this manual, including, but not limited
to, the implied warranties of merchantability, non-infringement and fitness
for a particular purpose.
Hewlett-Packard Company shall not be liable for any errors or for
incidental or consequential damages in connection with the furnishing,
performance, or use of this manual or the examples contained herein.
Reproduction, adaptation, or translation of this manual is prohibited
without prior written permission of Hewlett-Packard Company, except as
allowed under the copyright laws.
Hewlett-Packard Company
16399 West Bernardo Drive
MS 8-600
San Diego, CA 92127-1899
USA
Printing History
Edition 1 May 2008
-1-
File name: HP OfficeCalc 100_User's Guide_English_EN_F2220-90001_Edition 1
DATE: 2008/5/13
KINPO PART NO.: HDP000VHE08
POWER SUPPLY
HP OfficeCalc 100 is a dual-powered (high power solar + back-up
battery) calculator operative under any lighting conditions.
-Auto power-off function-
The calculator switches the power off automatically if there has been no
key entry for about 7 minutes.
-Battery change-
Remove the screw and the battery cover. Install a new battery with the “+”
symbol facing upward, and then use a pointed object to press the RESET
hole which lies at the bottom-right corner of the battery compartment.
When you finish, replace the battery cover and secure the screw.