Hotpoint-Ariston XBZ 800 AE NF User Manual [EN]

63702001GB.fm Page 4 Friday, September 8, 2006 6:51 PM
INSTRUCTIONS FOR USE
PRODUCT DESCRIPTION BEFORE USING THE APPLIANCE SAFEGUARDING THE ENVIRONMENT PRECAUTIONS AND GENERAL
RECOMMENDATIONS INSTALLATION HOW TO OPERATE THE REFRIGERATOR/
FREEZER COMPARTMENT FREEZING USE OF THE ICE AND WATER DISPENSER
(ON SOME MODELS) USE OF THE ICE AND WATER DISPENSER
LIGHT AND DISPENSER LOCK (ON SOME MODELS)
AUTOMATIC ICE MAKER COMMON ICE MAKER PROBLEMS MAINTENANCE AND CLEANING PRECAUTIONS IN CASE OF “VACATION” TROUBLESHOOTING GUIDE ASSISTANCE WATER FILTRATION AND MONITORING
SYSTEM (ON SOME MODELS) REFRIGERATOR SCRAPPING ELECTRICAL CONNECTION
4
63702001GB.fm Page 5 Friday, September 8, 2006 6:51 PM
PRODUCT DESCRIPTION
Freezer Compartment
Automatic ice maker
S.
Grids
T.
Bottom basket (on some models)
U.
Top basket
V.
Ice cube bucket
W.
Freezer inner door insert
X.
Freezer inner door tray
Y.
Top inside light (and bottom inside light on
Z.
some models)
Refrigerator compartment
Inside light
A.
Middle light (on some models)
B.
Adjustable shelf
C.
Drawer lid
D.
Drawer (on some models)
E.
Crisper
F.
Crisper adjustment
G.
Meat drawer
H.
Meat drawer adjustment
I.
Compartment
L.
Door tray (with bottle holder on some models)
M.
2-litre door tray (with bottle holder on some
N.
models)
0.75-litre door tray
O.
Tray divider (on some models)
P.
Egg tray
Q.
Water filter (on some models)
R.
5
63702001GB.fm Page 6 Friday, September 8, 2006 6:51 PM
BEFORE USING THE APPLIANCE
Your new appliance is designed exclusively for
domestic use.
To get the most from your new appliance, carefully read the user handbook which contains a description of the appliance and useful tips for storing food.
Keep this handbook for future consultation.
After unpacking, make sure that the appliance
1.
is undamaged and that the door closes perfectly tight. Any damage must be reported to your dealer within 24 hours after delivery of the appliance. Wait at least two hours before switching the
2.
appliance on in order to ensure the refrigerant circuit is fully efficient. Installation of the appliance and electrical
3.
connections must be carried out by a qualified electrician, in accordance with the manufacturer’s instructions and local safety regulations. Clean the inside of the appliance before using it.
4.
SAFEGUARDING THE ENVIRONMENT
1.Packing
The packaging material is 100% recyclable and carries the recycling symbol. Follow local regulations for scrapping. Keep the packaging materials (plastic bags, polystyrene parts, etc.) out of reach of children, as they are potentially dangerous.
2.Scrapping/Disposal
The appliance is manufactured using recyclable material. This appliance is marked according to the European directive 2002/96/EC on Waste Electrical and Electronic Equipment (WEEE). By making sure this appliance is disposed of correctly, the user will help prevent potentially negative consequences for the environment and the health of persons.
The symbol on the product, or on the documents accompanying the products, indicates that this appliance may not be treated as household waste. Instead it shall be handed over to the applicable collection point for the recycling of electrical and electronic equipment. Before scrapping, make the appliance unusable by cutting off the power cable and removing the doors and shelves so that children cannot easily climb inside the appliance. Disposal must be carried out in accordance with local environmental regulations for waste disposal. Deliver the appliance immediately to an authorized dump; do not leave it unattended even for a few days, since it is potentially dangerous for children. For more detailed information about treatment, recovery and recycling of this appliance, please contact your local city office, your household waste disposal service or the shop where you purchased the appliance.
Information:
This appliance does not contain CFC (the refrigerant circuit contains R134a) or HFC (the refrigerant circuit contains R600a) (see the rating plate inside the appliance). Appliances with Isobutane (R600a): isobutane is a naturally occurring, low environmental impact gas. Caution is required, however, because isobutane is flammable. Therefore, ensure that the pipelines of the refrigerant circuit do not get damaged.
Declaration of conformity
This appliance is designed to store food and is
manufactured in conformity with Regulation (EC) No. 1935/2004.
This appliance has been designed,
manufactured and retailed in compliance with:
- the safety objectives of the Low Voltage Directive 73/23/EEC;
- the protection requirements of the “EMC” Directive 89/336/EEC,
- amended by Directive 93/68/EEC.
The electrical safety of the appliance can only be
guaranteed if the appliance is connected to an approved earth connection.
6
63702001GB.fm Page 7 Friday, September 8, 2006 6:51 PM
PRECAUTIONS AND GENERAL RECOMMENDATIONS
During installation, make sure the appliance
does not damage the power cable. Make sure that the appliance is not near a heat
source.. To ensure adequate ventilation, leave a space
on both sides and above the appliance and follow the installation instructions.
Keep the appliance ventilation openings free.
Power cable modification or replacement
must only be carried out by qualified personnel.
It must be possible to disconnect the
appliance from the mains by unplugging it or by means of a two-pole switch fitted upline of the socket.
Ensure that the voltage indicated on the
appliance rating plate corresponds to the domestic supply voltage. For the water connection, use the pipe
supplied with the new appliance and do not use that of the previous appliance. Install and level the appliance on a floor strong
enough to take its weight and in an area suitable for its size and use. The appliance must be handled and installed
by two or more persons. Be careful not to damage the floors when you
move the appliance (e.g. parquet flooring). Do not use single/multiple adapters or
extension cables. Place the appliance in a dry and well-
ventilated place. The appliance is arranged to operate in places where the temperature comes within the following ranges, according to the climatic class indicated on the rating plate. The appliance may not work properly if it is left for a long period at a temperature above or below the indicated range..
Climatic class Amb. T. (°C) Amb. T. (°F)
SN From 10 to 32 From 50 to 90
N From 16 to 32 From 61 to 90
ST From 18 to 38 From 64 to 100
T From 18 to 43 From 64 to 110
Do not store or use petrol, gas or flammable
liquids in the vicinity of the appliance or other electrical appliances. The fumes can create a fire hazard or explosion.
Do not use mechanical, electric or chemical
means other than those recommended by the Manufacturer to speed up the defrost process.
Do not damage the appliance's refrigerant
circuit pipes. Do not use or place electrical appliances
inside the compartments if they are not of the type expressly authorized by the Manufacturer. This appliance is not designed for use by
young children or the infirm without supervision. To avoid the risk of children being trapped
and therefore suffocating, do not allow them to play or hide inside the appliance.
Do not swallow the contents (non-toxic) of
the ice packs (if provided). Use the refrigerator compartment only for
the storage of fresh food and the freezer compartment only for the storage of frozen food, the freezing of fresh food, and to make ice cubes.
Do not store glass containers with liquids in
the freezer since they may burst. Do not eat ice cubes or ice lollies immediately
after taking them out of the freezer since they may cause cold burns. Before servicing or cleaning the appliance,
unplug it from the mains or disconnect the electrical power supply.
All appliances equipped with an ice maker or
water dispenser must be connected to a mains water supply that delivers potable water only (with water pressure between
0.17 and 0.81 Mpascals (1.7 and 8.1 bar)). Ice makers and/or water dispensers not directly connected to a mains water supply must be filled with potable water only.
• The Manufacturer declines any liability if the above recommendations and precautions are not respected.
7
63702001GB.fm Page 8 Friday, September 8, 2006 6:51 PM
INSTALLATION
Make sure that your refrigerator is not near a heat source.
Install it in a dry and well-ventilated place.
To ensure proper ventilation leave a 1 cm space on both sides and above the refrigerator.
Clean the inside of the refrigerator before using it.
Leave the refrigerator (without moving it) for at least one hour before connecting it to the power
outlet. The appliance must be connected to a water supply that delivers drinking or chemically purified water.
Install and level the refrigerator on a floor strong enough to take its weight and in an area suitable for
its size and use. Do not use the refrigerator in places where the temperature can fall below 13°C.
Be careful not to damage the floors when moving the appliance (e.g. parquet).
HOW TO OPERATE THE REFRIGERATOR/ FREEZER COMPARTMENT
Connect the appliance to the water supply and power supply (see Installation manual).
When the appliance is connected to the power supply, two hyphens will appear on the freezer display
until the optimum temperature is reached. The refrigerator display will show a temperature of +5°C (factory set). When the appliance is warm, the red alarm LED will blink and the acoustic alarm sounds, indicating that
the appliance has not yet reached the optimum temperature for preserving food. Press the Reset button to deactivate the acoustic alarm.
The red LED will stop blinking when the freezer compartment reaches a sufficiently low
temperature for preserving food. At this point food can be placed in the freezer compartment. After being switched on, the refrigerator needs 2/3 hours to reach the correct temperature to store a
typical volume of food in the refrigerator compartment.
IMPORTANT
Turning the refrigerator and freezer controls to a cooler than recommended setting will not cool the compartments any faster. Do not place food near the air vents in the refrigerator compartment.
A built-in exterior moisture control continuously guards against moisture build-up on the front edges;
Do not be alarmed if these edges sometimes feel warm to the touch. The inside light switches on when both doors are opened.
8
: If food is introduced before the refrigerator has cooled completely, it may deteriorate.
63702001GB.fm Page 9 Friday, September 8, 2006 6:51 PM
Guide to the refrigerator/freezer and ice/water dispenser control panel
Stand-By
When button is pressed, the appliance switches to standby. This function deactivates the refrigerator and freezer compartments. When the standby function is activated, two green dots will appear on both of the displays. To restore the previous setting, carry out the same procedure until the previous temperatures appear on both of the displays. When the appliance is on standby the light inside the refrigerator compartment is off. Remember that this operation does not disconnect the appliance from the power supply.
Fast freezing
This function must be activated before freezing fresh food. To activate the function press the button, which lights up yellow; the function is switched off automatically after 24 hours or manually by pressing the button again.
When this function is activated, the meat drawer slider must be set to “vegetables”.
Freezer compartment display
Shows the freezer compartment temperature setting. The set T° is stored and will automatically be reset even after a power failure or if the appliance is
switched off by pressing the standby button.
Freezer compartment temperature selection and control
To change the inside temperature, press buttons until the desired value is reached and shown on the display.
Refrigerator compartment display
Shows the refrigerator compartment temperature setting. The set T° is stored and will automatically be reset even after a power failure or if the appliance is
switched off by pressing the standby button.
Refrigerator compartment temperature selection and control
To change the inside temperature, press buttons until the required value is reached and shown on the display.
Fast cooling
Switches on and shows the operating status of the Fast Cooling function, used to quickly chill fresh food placed in the refrigerator compartment. The function is activated when the button lights up yellow and is switched off automatically after 6 hours or manually by pressing the button again.
9
Loading...
+ 13 hidden pages