HOTPOINT/ARISTON BCB 4010 E Daily Reference Guide
Quick guide
THANK YOU FOR BUYING A
HOTPOINT-ARISTON PRODUCT
In order to receive a more complete assistance, please
register your product on www . hotpoint . eu/ register
PRODUCT DESCRIPTION
FIRST TIME USE
Wait at least two hours, after the installation, before connecting
the appliance to the power supply. Connect the appliance to the
power supply it starts the operation automatically. The ideal storage
temperatures for the food are preset in the factory.
CONTROL PANEL
3.
1. 1. Freezer and refrigerator compartment
2.
4.6.8. 7.
5.
EN
Before using the appliance carefully read the Safety
Instruction.
After turning the appliance on, you must wait for 4-6 hours for the
correct storage temperature to be reached for a normally lled
appliance. Position the antibacterial anti-odour lter in the fan as
demonstrated in the lter packaging (if available). If the audible signal
sounds, it means that the temperature alarm has intervened: press the
button to switch o the acoustic alarms.
temperature indicator
2. Fast cool
3. Fan indicator
4. On/stand-by
5. Alarm indicator
6. Turning o the sound alarm
7. Black out alarm indicator
8. Temperature button
FAN*
The Fan improves temperature distribution inside the product,
allowing better preservation of stored food and reduction of excess
humidity. By default, the fan is switched on. You can turn the fan on/
o by pressing for 3 seconds
indicator will ash and a sound signal is activated one times if the
fan is OFF or the temperature indicator will ash and a sound signal
is activated two times if the fan is ON. If the ambient temperature
exceeds 27°C, or if drops of water are present on the glass shelves,
it is essential that the fan is on to ensure the proper preservation of
the food. Deactivation of the fan allows energy consumption to be
optimised.
Note: the fan restarts automatically after a power cut or after turning o
the appliance. Do not obstruct the air intake area with food items.
ON/STANDBY
Press the button for 3 seconds to turn the appliance o. Press
the button again briey to reactivate the appliance.
Note: this does not disconnect the appliance from the power supply.
FREEZER AND REFRIGERATOR
COMPARTMENT TEMPERATURE
It is possible to set a dierent temperature of the appliance by pressing
the "Temp." button.
LEDs lit Set temperature
High Low
and buttons. The temperature
Low (colder)
Medium-low
Medium
Medium-high
High (less cold)
FAST COOL
Press the button
quantity of fresh food in the refrigerator compartment. When
the function is turned on the icon light up. The function turns o
automatically after 36 hours, or manually by pressing the button again
for 3 seconds.
TURNING OFF THE SOUND ALARM
To turn o the sound alarm, briey press the
for 3 seconds before placing a large
button.
* Available only on certain models
HOW TO STORE FOOD AND BEVERAGE
TROUBLESHOOTING
Legend
TEMPERATE ZONE
Suggested for storage of tropical fruit, cans, drink, eggs,
sauces, pickles, butter, jam
COOL ZONE
Suggested for storage of cheese, milk, daily food,
delicatessen, yoghurt
COOLEST AREA
Suggested for storage of cold cuts, desserts, meat and
sh
FRUIT & VEGETABLE DRAWER
FREEZER DRAWERS
FREEZING ZONE DRAWER
(Max cool zone)
Suggested to freeze fresh/cooked food
What to do if... Possible reasons Solutions
The control panel is
switched o, the appliance
does not work.
The inside light does not
work.
The temperature inside the
compartments is not low
enough.
There is water on the
bottom of the refrigerator
compartment.
The front edge of the
appliance, at the door
gasket, is hot.
The red
and a sound signal is
activated
icon is ashing
There may be an appliance power
supply problem.
The light may need to be replaced. • Contact the authorised Technical Assistance Service.
The appliance may be in On / Stand-by
mode.
There could be various causes (see
“Solutions”).
The defrost water drain is blocked. Clean the defrosting water drain (see section "Cleaning and
This is not a defect. It prevents
condensation from forming.
Door open alarm
It is activated when the refrigerator
compartment door remains open for a
prolonged period of time.
Check that:
• there is not a power outage;
• the plug is properly inserted in the power socket and the mains
double-pole switch (if present) is in the correct position (i.e. allows
the appliance to be powered);
• the household electrical system protection devices are ecient;
• the power cable is not damaged.
• Turn the appliance on by briey pressing the
Stand-by function).
Check that:
• the doors close properly;
• the appliance is not installed near a heat source;
• the set temperature is adequate;
• the circulation of air through the ventilation of the appliance is
ensured.
Maintenance").
No solution is necessary.
To turn the sound signal o, close the open door of the product.
button (see On/
* Available only on certain models
Loading...