HOTPOINT DK 29 K UK User Manual
Please phone us on
08448 24 24 24
to activate your
guarantee
DK 29 K UK
English
Operating Instructions
OVEN
Contents
Operating Instructions,1
Warnings,2
Description of the appliance,3
Installation,4
Electrical Connection,4
Start-up and use,7
Precautions and tips,7
Maintenance and care,7
Troubleshooting,7
Afetr Sales Service,9
Guarantee,10
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Warnings
GB
WARNING: The appliance and its accessible parts
become hot during use. Care should be taken to
avoid touching heating elements. Children less than 8
years of age shall be kept away unless continuously
supervised. This appliance can be used by children
aged from 8 years and above and persons with
reduced physical, sensory or mental capabilities or
lack of experience and knowledge if they have been
given supervision or instruction concerning use of the
appliance in a safe way and understand the hazards
involved. Children shall not play with the appliance.
Cleaning and user maintenance shall not be made
by children without supervision.
Do not use harsh abrasive cleaners or sharp metal
scrapers to clean the oven door glass since they can
scratch the surface, which may result in shattering of
the glass.
Never use steam cleaners or pressure cleaners on
the appliance.
2
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Description of the appliance
Overall view
2
5
5
DK 29 K UK
1
.
2
9
2
m
a
x
5
0
7
GB
0
9
2
5
9
5
2
5
0
1
2
3
SELECTOR
knob
OPERATION
indicator light
3
PLEASE PHONE US TO REGISTER YOUR APPLIANCE AND ACTIVATE YOUR PARTS GUARANTEE ON 08448 24 24 24
Installation
GB
! Once the appliance has been installed, the power supply cable and the
electrical socket must be easily accessible.
Before operating your new appliance please read this instruction booklet
carefully. It contains important information concerning the safe operation,
installation and maintenance of the appliance.
! The cable must not be bent or compressed.
TABLE OF CHARACERISTICS
! Please keep these operating instructions for future reference. Make sure that
the instructions are kept with the appliance if it is sold, given away or moved.
Dimensions
Positioning
Volume 54.4 l
! Keep all packaging material out of the reach of children. It may present a
choking or suffocation hazard (see Precautions and tips).
! The appliance must be installed by a qualied person in compliance with
the instructions provided. Incorrect installation may cause harm to people and
animals or may damage property.
! A set of spacers is included in the packaging; this can be used to achieve
optimal alignment between the drawer and the appliances with which it can
be combined during installation.
For further information regarding installation, please read the technical
documentation supplied with the appliance.
Oven above - drawer below (see gure)
* cupboard dimensions
1 - insert the drawer
2 - put the brackets on the drawer and secure to the cupboard with the 3 screws
3 - open the drawer and place the oven on the brackets
4 - align oven and drawer and secure the oven using the screws provided
5 - secure the drawer to the cupboard
Maximum
capacity
Electrical
connections
width 50.5 cm
height 23.8 cm
depth 45.5 cm
20 kg
voltage at 230-240 V
~ 50/60Hz
maximum power absorbed 85W
This
appliance conforms to the
following European Economic
Community directives:
2006/95/EEC dated 12/12/06
(Low Voltage) and subsequent
amendments;
2004/108/EEC dated 15/12/04
(Electromagnetic Compatibility)
and subsequent amendments;
93/68/EEC datet 22/07/93 and
subsequent amendments;
2012/19/EEC and subsequent
amendments;
Electrical Connection
! The compartment tted with a three-pole power supply cable is designed to
operate with an alternating current at the voltage and frequency indicated on
the data plate located on the appliance (see below).
Connecting the supply cable to the mains
The appliance must be directly connected to the mains using an omnipolar circuitbreaker with a minimum contact opening of 3 mm installed between the appliance
and the mains. The circuit-breaker must be suitable for the charge indicated and
must comply with current electrical regulations (the earthing wire must not be
interrupted by the circuit-breaker). The supply cable must be positioned so that
it does not come into contact with temperatures higher than 50°C at any point.
! The installer must ensure that the correct electrical connection has been
made and that it is fully compliant with safety regulations.
Before connecting the appliance to the power supply, make sure that:
• The appliance is earthed and the plug is compliant with the law.
• The socket can withstand the maximum power of the appliance, which is
indicated on the data plate (see below).
• The voltage is in the range between the values indicated on the data plate
(see below).
• The socket is compatible with the plug of the appliance. If the socket is
incompatible with the plug, ask an authorised technician to replace it. Do
not use extension cords or multiple sockets.
4
Loading...