Hotpoint CIA 641 C S, CIC 642 C User Manual

Operating Instructions

HOB

English,1

CIC 642 C CIA 641 C S

Contents

Warnings, 2

Installation, 3-4

Positioning Electrical connection

Description of the appliance, 5

Control panel

Start-up and use, 6-9

Switching on the hob Switching on the cooking zones Booster function Switching off the cooking zones Programming the cooking duration Timer Control panel lock Switching off the hob “Demo” mode Practical advice on using the appliance Safety devices Practical cooking advice

Precautions and tips, 10

General safety Disposal

Care and maintenance, 11

Switching the appliance off Cleaning the appliance Disassembling the hob

Technical description of the models, 11

After Sales Service, 12

Guarantee, 13

English

WARNING!

• WARNING: The appliance and

its accessible parts become hot during use.

• Care should be taken to avoid

touching heating elements.

• Children less than 8 years of

age shall be kept away unless continuously supervised.

• This appliance can be used by

children aged from 8 years and above and persons with reduced physical, sensory or mental capabilities or lack of experience and knowledge if they have been given supervision or instruction concerning use of the appliance in a safe way and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be made by children without supervision.

• WARNING: Unattended cooking

on a hob with fat or oil can be dangerous and may result in fire.

• NEVER try to extinguish a fire with

water, but switch off the appliance and then cover flame e.g. with a lid or a fire blanket.

• WARNING: Danger of fire: do

not store items on the cooking surfaces.

• WARNING: If the surface in glass-

ceramic is cracked, switch off the appliance to avoid the possibility of electric shock.

•Never use steam cleaners

or pressure cleaners on the appliance.

•The appliance is not intended to be

operated by means of an external timer or separate remote control system.

• Do not place metal objects (knives,

spoons, pan lids, etc.) on the hob as they may become hot.

• After use, switch off the hob

element by its control and do not rely on the pan detector.

Installation

Before operating your new appliance please read this instruction booklet carefully. It contains important information concerning the safe operation, installation and maintenance of the appliance.

Please keep these operating instructions for future

reference. Pass them on to any new owners of the appliance.

Positioning

! Keep all packaging material out of the reach of

children. It may present a choking or suffocation hazard (

The appliance must be installed by a qualified

see Precautions and tips

professional in accordance with the instructions provided. Incorrect installation may cause harm to people and animals or may damage property.

Built-in appliance

Use a suitable cabinet to ensure that the appliance functions properly.

• The supporting surface must be heat-resistant up to

a temperature of approximately 100°C.

• If the appliance is to be installed above an oven, the

oven must be equipped with a forced ventilation cooling system.

• Avoid installing the hob above a dishwasher: if this

cannot be avoided, place a waterproof separation device between the two appliances.

• Depending on the hob you want to install, the

cabinet must have the following dimensions (

figure

see

590

5 mm

UNDERSIDE OF HOB

min. 20 mm

COMPARTMENT

min. 40 mm

min. 20 mm

FAN-ASSISTED

OVEN

min. 40 mm

FRONT SIDE OF HOB

SUPPORTING SURFACE

560 +/- 1

520

490 +/- 1

Ventilation

To allow adequate ventilation and to avoid overheating of the surrounding surfaces the hob should be positioned as follows:

• At a minimum distance of 40 mm from the back

panel or any other vertical surfaces.

• So that a minimum distance of 20 mm is maintained

between the installation cavity and the cabinet underneath.

• Kitchen cabinets adjacent to the appliance and taller

than the top of the hob must be at least 600 mm from the edge of the hob.

Fixing

The appliance must be installed on a perfectly level

supporting surface. Any deformities caused by improper fixing could affect the features and operation of the hob. The thickness of the supporting surface

taken into account when choosing

the length of the

should be

screws for the fixing hooks:

• 30 mm thick: 23 mm screws

• 40 mm thick: 13 mm screws Fix the hob as follows:

1. Use short flat-bottomed screws to fix the 4 alignment springs in the holes provided at the central point of each side of the hob.

2. Place the hob in the cavity, make sure it is in a central position and push down on the whole perimeter until the hob is stuck to the supporting surface.

3. For hobs with raised sides: After inserting the hob into its cavity, insert the 4 fixing hooks (each has its own pin) into the lower edges of the hob, using the long pointed screws to fix them in place, until the glass is stuck to the supporting surface.

The screws for the alignment springs must remain

accessible.

In order to adhere to safety standards, the appliance

must not come into contact with electrical parts once it has been installed.

All parts which ensure the safe operation of the appliance must not be removable without the aid of a tool.

Electrical connection

The electrical connection for the hob and for any builtin oven must be carried out separately, both for safety purposes and to make extracting the oven easier.

Single-phase connection

The hob is equipped with a pre-connected electricity supply cable, which is designed for single-phase connection. Connect the wires in accordance with the instructions given in the following table and diagrams:

Voltage and

mains frequency

220-240V 1+N ~

50 Hz

Other types of connection

If the mains supply corresponds with one of the following:

Voltage and mains frequency

• 400V - 2+N ~ 50 Hz

• 220-240V 3 ~ 50 Hz

Electrical cable Wire connection

: yellow/green

: the two blue wires together

: brown and black together

• 400V 3 - N ~ 50 Hz

• 400V - 2+2N ~ 50 Hz

Separate the wires and connect them in accordance with the instructions given in the following table and diagrams:

50 Hz

Electrical cable Wire connection

: yellow/green;

N: the two blue wires together

L1: black L2: brown

: yellow/green;

N1: blue N2: blue L1: black L2: brown

Voltage and

mains frequency

400V - 2+N ~

220-240V 3 ~

400V 3-N ~

400V - 2+2N ~

Connecting the electricity supply cable to the mains

If the appliance is being connected directly to the electricity mains an omnipolar switch must be installed with a minimum opening of 3 mm between contacts.

The installer must ensure that the correct electrical connection has been made and that it is fully compliant with safety regulations. Before connecting the appliance to the power supply, make sure that:

• The appliance is earthed and the plug is compliant

with the law.

• The socket can withstand the maximum power of the

appliance, which is indicated on the data plate located on the appliance itself.

• The voltage falls within the range of values indicated

on the data plate.

• The socket is compatible with the plug of the

appliance. If the socket is incompatible with the plug, ask an authorised technician to replace it. Do not use extension cords or multiple sockets.

Once the appliance has been installed, the power supply cable and the electrical socket must be easily accessible.

The cable must not be bent or compressed.

The cable must be checked regularly and replaced

by authorised technicians only.

The manufacturer declines any liability should these safety measures not be observed.

! Do not remove or replace the power supply cable for any reason. Its removal or replacement will void the warranty and the CE marking. INDESIT does not assume liability for accidents or damage arising from replacement/removal of the original power supply cable. Replacement can only be accepted when carried out by personnel authorised by INDESIT and using an original spare part.

Description of the appliance

Control panel

The control panel described in this manual is only a representative example: it may not exactly match the panel on your appliance.

TIMER*

indicator light

POWER and

RESIDUAL HEAT

indicators

COOKING ZONE SELECTED indicator light

INCREASE

POWER button

BOOSTER*

button

BOOSTER*

indicator light

BoosterBooster

COOKING ZONE SELECTOR buttons

REDUCE POWER

button

PROGRAMME TIMER*

display

COOKING ZONE PROGRAMMED*

indicator light

ON/OFF

button

ON/OFF

indicator light

CONTROLS LOCKED

indicator light

CONTROL PANEL LOCK button

PROGRAMME TIMER* button

• INCREASE POWER button switches on the hotplate and controls the power (

use

see Start-up and

• REDUCE POWER button controls the power and switches off the hotplate (

COOKING ZONE SELECTOR COOKING ZONE SELECTOR

COOKING ZONE SELECTOR button shows a

•

COOKING ZONE SELECTOR COOKING ZONE SELECTOR

see Start-up and use

particular cooking zone has been selected and therefore various adjustments are possible.

• COOKING ZONE SELECTOR button is used to select the desired cooking zone.

• POWER indicator provides a visual display for the current heat level.

• ON/OFF button switches the appliance on and off.

• ON/OFF indicator light shows whether the appliance is on or off.

• PROGRAMME TIMER* button controls the cooking programme times (

see Start-up and use

• PROGRAMME TIMER* display shows which programme has been selected (

use

see Start-up and

• COOKING ZONE PROGRAMMED* indicator lights show which cooking zones are being used during a cooking programme (

see Start-up and use

• CONTROL PANEL LOCK button prevents accidental changes to the hob settings (

up and use

see Start-

• CONTROL PANEL LOCK indicator light shows the control panel has been locked (

and use

see Start-up

• BOOSTER button* activates the booster function 3000 W - of the cooking zone

use)

(see Start-up and

• BOOSTER indicator light* shows that the booster function has been activated.

• TIMER* indicator light shows that the timer has been activated

! This product complies with the requirements of the latest European Directive on the limitation of power consumption of the standby mode. If no operations are carried out for a period of 2 minutes, after the residual heat indicator lights turn off and the fan stops (if present), the appliance automatically switches to the “off mode”. The appliance resumes the operating mode once the ON/OFF button is pressed.

Only available in certain models.

+ 11 hidden pages