Hoshizaki FD650MRJC Specifications
Modular Cubelet Ice Machine
FD-650M_J-C
®
Slim-Line Dispenser Series
W x D x H
22" x 24" x 26”
FD-650M_J-C
05/07/19
Item # 13464
Item #:
Project:
Qty:
AIA#:
Features
Durable stainless steel exterior
FD-650MAJ-C
Air-Cooled
FD-650MWJ-C
Water-Cooled
Shown on optional
Lancer 30” Dispenser
FD-650MRJ-C
Remote Air-Cooled
TM
Advanced CleanCycle24
design
Stainless steel auger with greaseless
bearing
• Up to 634 lbs. of ice production per 24 hours
• 2 second flush cycle every hour
• Flush cycle removes sediment for cleaner ice
• Infrared bin control for easy cleaning and reliability
• Protected by H-GUARD Plus
Antimicrobial Agent
• R-404A Refrigerant
Available on Bins:
B-250PF
Top kit may be required; See Bin Spec Sheets.
Warranty:
3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.
Shipping: (LxWxH)
B-500PF/SF
28.5” x 26.75” x 27.13” 11.97ft
B-700PF/S
B-800PF/SF
Volume:
B-900PF/SF
3
TM
Condenser
Air
Water
Remote
ICE PRODUCTION
Model
FD-650MAJ-C
FD-650MWJ-C
FD-650MRJ-C
Air / Water Temp
Lbs. per 24 hours
70°/ 50°F 90°/ 70°F
634
622
588
Cube Dimensions*
495
520
470
WATER USAGE
Potable
Gal. per 100 lbs.
90°/ 70°F 90°/ 70°F
12.0
12.0
12.0
Operating Limits
• Ambient Temp Range 45 - 100°F
• Water Temp Range 45 - 90°F
• Water Pressure 10 - 113 PSIG
• Voltage Range 104-127V
Service
• Panels easily removed and all components
accessible for service.
• Allow 24”(61 cm) clearance at top for removal of
* approximate size in inches, image not to scale
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
auger and 6” (15 cm) clearance at rear and sides for
proper air circulation and ease of maintenance/service.
Condenser
Gal. per 100 lbs.
N/A
95.3
N/A
kWh Used
per 100 lbs.
90°/ 70°F
5.50
4.02
4.95
Max. Fuse Sz
or HACR
Circuit Bkr
20A
20A
20A
ELECTRICAL
Amperage
11.3A
7.9A
10.9A
Voltage
115V/60/1
115V/60/1
115V/60/1
Circuit
Wires
(including ground)
3
3
3
Heat
Rejection
BTU/hr.
6,800
5,400
5,900
Refrigerant
Charge Amount
12.3 oz.
15 oz.
2 lbs. 3.3 oz.
4 lb. 1.3 oz.*
*(with condenser)
Plumbing
• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)
• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent
• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent
Hoshizaki reserves the right to change specifications without notice.
Net / Ship
Weight (lbs.)
176 / 205
176 / 205
176 / 205
Modular Cubelet Ice Machine
FD-650M_J-C
Slim-Line Dispenser Series
FD-650M_J-C
05/07/19
Item # 13464
inch
[mm]
Front
AIR-COOLED
AIR-COOLED
WATER-COOLED REMOTE AIR-COOLED
FrontFront
WATER-COOLED
REMOTE AIR-COOLED
REAR VIEW
AIR-COOLED
Front
Front
AIR-COOLED
BOTTOM VIEW SIDE VIEW FRONT VIEW
WATER-COOLED
© HOSHIZAKI AMERICA, INC.
618 Hwy, 74 S., Peachtree City, GA 30269 | TEL 800-438-6087 | FAX 800-345-1325 | www.hoshizakiamerica.com
Front
REMOTE AIR-COOLED
Pre-Charged Tubing Kits
(Sold Separately)
20' R404-2046-2
35' R404-3546-2
Voltage supply for the URC
Remote Condenser is supplied
from the Ice Maker.
No addtional circuit is required.
REMOTE AIR-COOLEDWATER-COOLED
URC-5F Remote Condenser (Sold Separately)
(W x D x H) 21
2 1/2
1 3/4
17 1/4
13/16
1/16
13/16
3
x 14
URC-5F
3/16
21
For Use with FD-650MRH-C
21
Air Flow
x 32
14 1/16
17 7/8
3/8 Discharge Line
1/4 Liquid
Refrigerant Line
13/16
32 13/16
Electrical
Conduit
Access
Loading...