Hoshizaki F801MWJC Specifications

W x D x H

F-801M_J(-C)

1”

TM

22" x 27

Modular Ice Machine
Slim-Line Series

3/8

" x 26"

F-801M_J(-C)

04/20/18

Item # 13037

Item #:

Project:

Qty:

AIA#:

Features

Durable stainless steel exterior

F-801MAJ

Air-Cooled Flaker

F-801MWJ

Water-Cooled Flaker

F-801MAJ-C

Air-Cooled Cubelet

F-801MWJ-C

Water-Cooled Cubelet

TM

Advanced CleanCycle24

design

Stainless steel auger with greaseless
bearing

• Flaker - Up to 751 lbs. of ice production per
24 hours

• Cubelet - Up to 690 lbs. of ice production per
24 hours

• Mount two units, side-by-side, in only 44” of floor
space for double the amount of ice production

• 2 second flush cycle every hour

• Flush cycle removes sediment for cleaner ice

• Infrared bin control for easy cleaning and reliability

• R-404A Refrigerant

Available on Bins:

B-250PF
B-300PF/SF

Top kit may be required. See Bin Spec Sheets. *Two unit application only.

Warranty:

3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.

B-500PF/SF
B-700PF/SF

B-800PF/SF
B-900PF/SF

B-1150SS
B-1300SS

B-1500SS*
B-1650SS*

ICE PRODUCTION

Condenser

Air

Water

Air

Water

Model

F-801MAJ

F-801MWJ

F-801MAJ-C

F-801MWJ-C

Air / Water Temp

Lbs. per 24 hours

70°/ 50°F 90°/ 70°F

751

566

680

605

690

532

632

580

Potable

Gal. per 100 lbs.

90°/ 70°F 90°/ 70°F

12.0

12.0

12.0

12.0

Cube Dimensions*

Flaked Cubelet

F-801MAJ F-801MAJ-C

Printed in the U.S.A.

© HOSHIZAKI AMERICA, INC.

* approximate size in inches, image not to scale

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

WATER USAGE

Condenser

Gal. per 100 lbs.

N/A

119

N/A

120

kWh Used

per 100 lbs.

90°/ 70°F

4.5

3.9

5.0

4.13

Max. Fuse Size

Circuit Breaker

or HACR

15A

15A

15A

15A

ELECTRICAL

Amperage

11.8A

11.8A

11.8A

11.5A

Operating Limits

• Ambient Temp Range 45 - 100°F

• Water Temp Range 45 - 90°F

• Water Pressure 10 - 113 PSIG

• Voltage Range 104-127V

Service

• Panels easily removed and all components
accessible for service.

• Removable/cleanable air filter (Air-cooled model only)

• Allow 6” (15 cm) clearance at rear and sides, and 24”
(61 cm) clearance at top for proper air circulation and
ease of maintenance/service.

Voltage

115V/60/1

115V/60/1

115V/60/1

115V/60/1

Circuit

Wires

(including ground)

3

3

3

3

Heat

Rejection

BTU/hr.

5,900

6,200

5,000

6,000

Power cord not included. Must be hard-wired at site.

Refrigerant

Charge Amount

1 lbs. 12 oz.

10.6 oz.

1 lbs. 12 oz.

10.6 oz.

Net / Ship

Weight (lbs.)

176 / 205

176 / 205

176 / 205

176 / 205

Plumbing

• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent
Water-Cooled Model (Lines Must Be Independent of Icemaker)

• Condenser Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Condenser Drain/Return Line: Minimum 1/4” Nominal ID
Hard Pipe (open drain system) or Copper Water Tubing
(closed loop system) or Equivalent

Hoshizaki reserves the right to change specifications without notice.

Modular Ice Machine

F-801M_J(-C)

Slim-Line Series

F-801M_J(-C)

04/20/18

Item # 13037

mm

[inch]

Front

AIR-COOLED

AIR-COOLED

WATER-COOLED

Front

WATER-COOLED

AIR-COOLED

Front

BOTTOM VIEW REAR VIEW SIDE VIEW FRONT VIEW

AIR-COOLED

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

WATER-COOLED

Front

WATER-COOLED

Printed in the U.S.A.