Hoshizaki F2001MLJ Specifications

W x D x H

F-2001MLJ

1”

30" x 27

Modular Flaker Ice Machine
Low-Side Series

1/2

" x 34

7/16

"*

F-2001MLJ

07/24/17

Item # 13155

Item #:

Project:

Qty:

AIA#:

Features

Durable stainless steel exterior

F-2001MLJ*

Flaker Shown on

optional bin B-900

*Requires a rack system

for installation

TM

Advanced CleanCycle24

design

Stainless steel auger with greaseless
bearing

• Up to 2280 lbs. of ice production per 24 hours

• Mount two units, side-by-side, in only 60” of floor
space for double the amount of ice production

• 2 second flush cycle every hour

• Flush cycle removes sediment for cleaner ice

• Protected by H-GUARD Plus
Antimicrobial Agent

• Nitrogen holding charge

• Can be used with refrigerant R404A, R407A, and
R407F

Available on Bins:

B-250PF
B-500PF/SF

Top kit may be required. See Bin Spec Sheets. *Two unit application only.

Warranty:

3 Year Parts & Labor on entire machine. 5 Year Parts on Compressor; air-cooled
condenser coil. Valid in United States, Canada, Puerto Rico and U.S. Territories.
Contact factory for warranty in other countries.

B-700PF/SF
B-800PF/SF

B-900PF/SF
B-1150SS

B-1300SS
B-1500SS*

B-1650SS*

TM

Condenser

Air-Cooled

Model

F-2001MLJ

Air / Water Temp

Lbs. per 24 hours

70°/ 50°F 90°/ 70°F

2280

Cube Dimensions*

Flaked

Printed in the U.S.A.

© HOSHIZAKI AMERICA, INC.

* approximate size in inches, image not to scale

ICE PRODUCTION

Type of Ice

(Hardness Rating)

1733

Flaked (69.2) 12.0 N/A

Operating Limits

• Ambient Temp Range 45 - 100°F

• Water Temp Range 45 - 90°F

• Water Pressure 10 - 113 PSIG

• Voltage Range 104-127V

WATER USAGE

Potable

Gal. per 100 lbs.

90°/ 70°F 90°/ 70°F

Gal. per 100 lbs.

Condenser

ELECTRICAL

kWh Used

per 100 lbs.

90°/ 70°F

Max. Fuse Size

or HACR

Circuit Breaker

0.6 15A 6.1A 115V/60/1 11,600

Amperage

Voltage

Plumbing

• Icemaker Water Supply Line: Minimum 1/4” Nominal ID
Copper Water Tubing or Equivalent

• Icemaker Drain Line: Minimum 3/4” Nominal ID Hard Pipe
or Equivalent

Service

• Panels easily removed and all components
accessible for service.

• Allow 6” (15 cm) clearance at rear and sides for proper
air circulation and ease of maintenance/service. Allow
24” (61 cm) clearance at top to allow removal of auger.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

Hoshizaki reserves the right to change specifications without notice.

Heat

Rejection

BTU/hr.

Shipping

Weight

250 lbs.

ENERGY

STAR

®

Modular Flaker Ice Machine

F-2001MLJ

Low-Side Series

F-2001MLJ

07/24/17

Item # 13155

mm

[inch]

REAR VIEW

Front

BOTTOM VIEW SIDE VIEW FRONT VIEW

© HOSHIZAKI AMERICA, INC.

618 Hwy, 74 S., Peachtree City, GA 30269 | TEL [phone] | FAX [phone] | www.hoshizakiamerica.com

Printed in the U.S.A.