Horizon Fitness LS 625E User Manual

LIMITED SERIES

START

/ STOP

MODE

P1 MANUAL

RAMP

P3 VALLEY

P4 FAT

BURN

P7 RANDO

P8 TA

RGET HR

PRO GR A M

ENTER

FOR MODEL :

LS 625E

ELLIPTICAL U S E R ’ S GUIDE

IN TRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Limited Series elliptical!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Limited Series elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-brake warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The Horizon Limited Series delivers.

TA B L E OF CO N T E NT S

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLYASSEMBLY

BEFORE

YOU BEGIN

Important Precautions

Assembly

Before You Begin

Elliptical Operation

Conditioning Guidelines

Troubleshooting & Maintenance

Limited Warranty

CONTACT INFORMATION

Back Panel

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION ASSEMBLY

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

IM PORTA NT PR EC AU TIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

To reduce the risk of burns, fire, electrical shock or injury to persons:

• If you experience any kind of pain, including, but not limited to chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• Do not wear clothes that might catch on any part of the elliptical.

• Do not turn pedal arms by hand.

• Make sure handlebars are secure before each use.

• Do not insert or drop any object into any opening.

• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• This elliptical should not be used by persons weighing more than 250 pounds. Failure to comply will void the warranty.

• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use a elliptical in any location that is not temperature controlled, such as, but not limited to garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the elliptical only as described in this manual.

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical. Children over the age of 12 should not use the elliptical without adult supervision.

It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

AS SEMBLY

START /

STOP

MOD

MANUA

P5 R

AMP

P4 FAT BU

RANDOM

T A

R GET HR

PRO

GRA

E NTER

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

There are several areas during the assembly process of a elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. During each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

A light application of grease may aid in the installation of hardware. Any grease, such as lithium

NOTE:

bike grease is recommended.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

Before proceeding, find your elliptical’s serial number located on the front stabilizer tube and enter it in the space provided below. Also locate the model name which is located on the side cover badge.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOxES BELOW:

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

TOOLS INCLUDED PARTS INCLUDED

c 5mm Allen Wrench

c 6mm Allen Wrench

c Phillips Screw Driver

c 13/15mm Flat Wrench

c 1 Console

c 1 Console Mast

c 1 Front Stabilizer Tube

c 2 Upper Handlebars

c 2 Lower Handlebars

c 2 Lower Link Arms

c 2 Pivoting Foot Pads

c 2 Top Side Covers

c 1 HORIZON FITNESS

6-Volt Power Adapter

c 4 Hardware Bags

c 2 Elbow Covers

c 1 Rear Stabilizer Cover

c 2 Front Stabilizer Covers

c 2 Handle Bar Covers

If you have questions or if there are any missing parts, contact Customer Tech Support.

Contact information is located on the back panel of this manual.

For a complete exploded diagram, visit us at www.horizonﬁtness.com

UPPER HANDLEBAR

MAIN FRAME

LOWER HANDLEBAR

LOWER LINK ARM

FRONT STABILIZER COVER

CONSOLE

GRIP PULSE

CONSOLE MAST

TOP COVER

PIVOTING FOOT PAD

PEDAL ARM

WHEEL COVER

ELBOW COVER

REAR STABILIZER COVER

HANDLE BAR COVER

START / STOP

MOD

ANUAL

P5 R

AMP

VALLEY

P4 FAT BUR

R ANDOM

P8 T ARGET HR

PRO G

RAM S

NTER

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

FRONT STABILIZER TUBE

BOLT (A)

SPRING WASHER (B)

FLAT WASHER (C)

MAIN FRAME

ASSEMBLY S T E P 1

BOLT (A) 20 mm Qty: 2

SPRING WASHER (B) 18 mm Qty: 2

FLAT WASHER (C) 20 mm Qty: 2

SCREW (D) Qty: 6

HARDWARE BAG FOR STEP 1 CONTENTS :

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

A) Open HARDWARE BAG FOR STEP 1.

B) Attach the FRONT STABILIZER TUBE to the MAIN FRAME using 2 BOLTS (A), 2 SPRING WASHERS (B) and 2

FLAT WASHERS (C).

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

SCREW (D)

REAR STABILIZER TUBE

FRONT STABILIZER TUBE

FRONT BASE COVER

REAR BASE COVER

PRECAUTIONS

IMPORTANT

ASSEMBLY

ASSEMBLY S T E P 1 (C ON T I N U E D )

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

C) Attach the REAR BASE COVER to the REAR STABILIZER TUBE using 2 SCREWS (D).

D) Attach the right FRONT BASE COVER to the right side FRONT STABILIZER TUBE using 2 SCREWS (D).

E) Repeat on the left side.

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

ASSEMBLY S T E P 2

CONSOLE MAST

BOLT (A)

SPRING WASHER (B)

FLAT WASHER (C)

MAIN FRAME

CONSOLE MAST BOOT

TOP FRONT COVER

TOP BACK COVER

CONSOLE WIRES

#0-5" NN 2UZ

413*/(8"4)&3# NN 2UZ

'-"58"4)&3$ NN 2UZ

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

A) Open HARDWARE BAG FOR STEP 2.

Carefully pull the CONSOLE CABLES through the CONSOLE MAST using the twist tie located inside the

CONSOLE MAST.

C) Attach the CONSOLE MAST to the MAIN FRAME using 4 BOLTS (A), 4 SPRING WASHERS (B) and 4 FLAT

WASHERS (C).

D) Insert the TOP FRONT COVER, followed by the TOP BACK COVER and snap them together.

E) Slide CONSOLE MAST BOOT down to seal the console mast hole.

HARDWARE BAG FOR STEP 2 CONTENTS :

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

CONSOLE MAST

LOWER HANDLEBAR

PRE-ATTACHED BOLT & WASHER

UPPER HANDLEBAR

PRE-ATTACHED SET SCREWS

NOTCH

TAB

FRONT HANDLEBAR COVER

BACK HANDLEBAR COVER

UPPER HANDLEBAR

LOWER HANDLEBAR

PRECAUTIONS

IMPORTANT

ASSEMBLY

ASSEMBLY S T E P 3

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

NOTE: There is NO hardware bag for this step. All hardware is pre-installed.

A) Remove PRE-ATTACHED BOLT & WASHERS from CONSOLE MAST.

B) Slide LOWER HANDLEBARS onto CONSOLE MAST and attach by re-inserting PRE-ATTACHED BOLT & WASHERS.

C) Slide UPPER HANDLEBARS onto LOWER HANDLEBARS and align NOTCH with TAB making sure handlebars are

joined together completely. Secure UPPER HANDLEBARS to LOWER HANDLEBARS using PRE-ATTACHED SET SCREWS.

D) Snap the front and back HANDLEBAR COVERS together onto the UPPER HANDLE BARS.

Note the position of the snap tabs on the covers before snapping into position.

E) Repeat on other side.

After handlebars are assembled they will rotate freely – be cautious. Until the machine is fully assembled, do not grab the handlebars for support.

WARRANTY

LIMITED

+ 22 hidden pages