Horizon Fitness E95 User Manual

HZ SERIES

FOR MODEL :

E95

ELLIPTICAL U S E R ’ S GUIDE

IN TRODUCTION

CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series elliptical!

Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizn Series elliptical can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics and innovative features you need to get stronger and healthier, faster. Because we're committed to designing fitness equipment from the inside out, we use only the highest quality components. It's a commitment we back with one of the strongest frame-to-break warranty packages in the industry.

You want exercise equipment that offers the most comfort, the best reliability and the highest quality in its class.

The Horizon Series delivers.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

TA B L E OF CO N T E NT S

Important Precautions

Assembly

Before You Begin

Elliptical Operation

Conditioning Guidelines

Troubleshooting & Maintenance

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

Limited Warranty

CONTACT INFORMATION

Back Panel

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

WARNING

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

IM PORTA NT PR EC AU TIONS

SAVE THESE INSTRUCTIONS

Read all instructions before using this elliptical. When using an electrical product, basic precautions should always be followed, including the following: Read all instructions before using this elliptical. It is the responsibility of the owner to ensure that all users of this elliptical are adequately informed of all warnings and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the number listed on the back panel of this manual.

To reduce the risk of burns, fire, electrical shock or injury to persons:

• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and consult your physician before continuing.

• Maintain a comfortable pace. Do not sprint above 80 rpms on this machine.

• To maintain balance, it is recommended to keep a grip on the handlebars while exercising, mounting or dismounting the machine.

• Do not wear clothes that might catch on any part of the elliptical.

• Do not turn pedal arms by hand.

• Make sure handlebars are secure before each use.

• Do not insert or drop any object into any opening.

• Unplug elliptical before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp cloth only; never use solvents. (See MAINTENANCE)

• This elliptical should not be used by persons weighing more than 300 pounds. Failure to comply will void the warranty.

• This elliptical is intended for in-home use only. Do not use this elliptical in any commercial, rental, school or institutional setting. Failure to comply will void the warranty.

• Do not use elliptical in garages, porches, pool rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.

• Use the elliptical only as described in this manual.

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

At NO time should pets or children under the age of 12 be closer to the elliptical than 10 feet. At NO time should children under the age of 12 use the elliptical. Children over the age of 12 should not use the elliptical without adult supervision.

It is essential that your elliptical is used only indoors, in a climate controlled room. If your elliptical has been exposed to colder temperatures or high moisture climates, it is strongly recommended that the elliptical is warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.

AS SEMBLY

4&3*"-/6.#&3 *4-0$"5&%6/%&3 $0/40-&."45#005

WARNING

IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!

There are several areas during the assembly process of a elliptical that special attention must be paid. It is very important to follow the assembly instructions correctly and to make sure all parts are firmly tightened. If the assembly instructions are not followed correctly, the elliptical could have frame parts that are not tightened and will seem loose and may cause irritating noises. To prevent damage to the elliptical, the assembly instructions must be reviewed and corrective actions should be taken.

UNPACKING

Unpack the product where you will be using it. Place the product on a level flat surface. It is recommended that you place a protective covering on your floor. Note: It is recommended that you apply grease to the threads of each bolt as you assemble the product, to prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and partially threaded in before completely tightening any ONE bolt.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

Before proceeding, find your elliptical’s serial number located under the console mast boot and enter it in the space provided below. Also locate the model name which is located on the side cover.

ENTER YOUR SERIAL NUMBER AND MODEL NAME IN THE BOxES BELOW:

SERIAL NUMBER :

MODEL NAME:

* Refer to the SERIAL NUMBER and MODEL NAME when calling for service. * Also enter this serial number on your Warranty Card.

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

INTRODUCTION

TOOLS INCLUDED

5mm Allen Wrench/Phillips Screw Driver 4mm Allen Wrench 17mm Flat Wrench

PARTS INCLUDED

1 Console 1 Console Mast 1 Console Mast Boot 1 Stabilizer Tube 2 Upper Handlebars 2 Lower Handlebar Assemblies 2 Foot Pad Brackets 1 Power Supply 5 Hardware Bags

If you have questions or if there are any missing parts, we will guarantee complete satisfaction.

Customer Tech Support contact information is located on the back panel of this manual.

GRIP PULSE

WATERBOTTLE CAGE MOUNT

CONSOLE MAST

CONSOLE MAST BOOT

MAIN FRAME

PIVOTING FOOTPAD

GUIDE RAIL

CONSOLE

UPPER HANDLEBAR

H-BAR

LOWER HANDLEBAR

STABILIZER TUBE

TRANSPORT WHEEL

PEDAL ARM

LINK ARM

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

ASSEMBLY S T E P 1

#0-5"

45"#*-*;&356#&

."*/'3".&

#0-5"

."*/'3".&

(6*%&3"*-4

#0-5" NN 2UZ

INTRODUCTION

A) Open HARDWARE BAG FOR STEP 1.

B) Attach STABILIZER TUBE to the

MAIN FRAME using 2 BOLTS (A).

ASSEMBLY S T E P 2

HARDWARE BAG FOR STEP 1 CONTENTS :

A) Open HARDWARE BAG FOR STEP 2.

B) Extend the GUIDE RAILS away

from the MAIN FRAME until bolt holes line up.

C) Tighten BOLTS (A) to secure GUIDE

RAILS.

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

HARDWARE BAG FOR STEP 2 CONTENTS :

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

1&%"-"3.

$3"/,"3.

/65%

8"4)&3&

/05&XBTIFSPOUPQTIPVME CFGBDJOHCMBDLTJEFEPXO

/05&XBTIFSPOCPUUPN TIPVMECFGBDJOHCMBDLTJEFVQ

INTRODUCTION

/:-0//65% NN 2UZ

8"4)&3& NN NNJOTJEF EJBNFUFS 2UZ

#0-54#

-0$,8"4)&34$

$0/40-&."45#005

$0/40-&."45

."*/'3".&

#0-5# NN 2UZ

-0$,8"4)&3$ 2UZ

ASSEMBLY S T E P 3

A) Open HARDWARE BAG FOR STEP 3.

PRECAUTIONS

IMPORTANT

ASSEMBLY

YOU BEGIN

BEFORE

HARDWARE BAG FOR STEP 3 CONTENTS :

B) Slide the CONSOLE MAST BOOT over the

bottom of the CONSOLE MAST.

C) Carefully pull console wires through the

CONSOLE MAST. Attach the console wires to the pre-attached routing wire. Discard wire when finished.

D) Attach CONSOLE MAST using 3 LOCK

WASHERS (C) and 3 BOLTS (B).

E) Slide CONSOLE MAST BOOT down to cover

exposed bolts.

OPERATION

ELLIPTICAL

CONDITIONING

GUIDELINES

TROUBLESHOOTING

& MAINTENANCE

WARRANTY

LIMITED

ASSEMBLY S T E P 4

A) Open HARDWARE BAG FOR STEP 4.

B) Attach the PEDAL ARM to the CRANK ARM using 1 NUT (D) and 2 WASHERS (E).

C) Repeat on other side.

HARDWARE BAG FOR STEP 4 CONTENTS :

ASSEMBLY S T E P 5

8"7:8"4)&3(

#0-5'

'0051"%#3"$,&5

1&%"-"3.

-*/,"3.

1*705*/('0051"%

#0-5' NN 2UZ

8"7:8"4)&3( NN 2UZ

'0051"%#3"$,&5 2UZ

HARDWARE BAG FOR STEP 5 CONTENTS :

A) Open HARDWARE BAG FOR STEP 5.

B) Slide the

LINK ARM into the PEDAL

ARM.

C) Place

WAVY WASHER (G) over the

LINK ARM axle.

D) Attach FOOTPAD BRACKET to LINK

ARM with 3 BOLTS (F).

E) Repeat on other side.

INTRODUCTION

IMPORTANT

PRECAUTIONS

ASSEMBLY

BEFORE

YOU BEGIN

ELLIPTICAL

OPERATION

GUIDELINES

CONDITIONING

& MAINTENANCE

TROUBLESHOOTING

LIMITED

WARRANTY

+ 19 hidden pages