Please enter the complete model and Manufacturing
Code in the spaces provided.
MODEL
MFG. CODE
Hint: Attach your sales receipt to this owner’s manual.
Verification of date of purchase may be required for
warranty service of your HOOVER
®
product.
Be sure to register your product online at Hoover.com or
call 1-800-944-9200 to register by phone. Visit Hoover.com
for additional video instructions for assembly and
maintenance.
CONTENTS
Important Safety Instructions....................................................................................3
Visit our website at hoover.com. Follow the authorized dealer locator link to find the Hoover® authorized
dealer nearest you or call 1-800-944-9200 for an automated referral of Hoover® authorized dealer
locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8am- 7pm EST.
PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.
2
IMPORTANT SAFETY INSTRUCTIONS
SAVE THESE INSTRUCTIONS
When using an electrical appliance, basic precautions should always be
followed, including the following:
READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.
WARNING: TO REDUCE THE RISK OF FIRE,
ELECTRIC SHOCK OR INJURY:
• Fully assemble before operating.
• Operate cleaner only at voltage specified on data label on back of cleaner.
• Do not leave appliance when plugged in. Unplug from outlet when not in use and
before cleaning or servicing.
• Do not use outdoors or on wet surfaces.
• Do not allow to be used as a toy. Not intended for use by children age 12 and
under. Close supervision is necessary when used near children. To avoid injury
or damage, keep children away from product, and do not allow children to place
fingers or other objects into any openings.
• Use only as described in this manual. Use only manufacturer’s recommended
attachments and products.
• Do not use with damaged cord or plug. If appliance is not working as it should,
has been dropped, damaged, left outdoors, or dropped into water, take it to a
service center prior to continuing use.
• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull
cord around sharp edges or corners. Do not place product on cord. Do not run
appliance over cord. Keep cord away from heated surfaces.
• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.
• Do not handle plug or appliance with wet hands.
• Do not put any object into openings. Do not use with any opening blocked; keep
free of dust, lint, hair, and anything that may reduce air flow.
• Keep hair, loose clothing, fingers, and all parts of body away from openings and
moving parts.
• Turn off all controls before unplugging.
• Use extra care when cleaning on stairs. To avoid personal injury or damage,
and to prevent the cleaner from falling, always place cleaner at bottom of stairs
on floor. Do not place cleaner on stairs or furniture, as it may result in injury or
damage.
• Do not use to pick up flammable or combustible liquids, such as gasoline, or fine
wood sandings, or use in areas where they may be present.
• Hold plug when rewinding onto cord reel. Do not allow plug to whip when
rewinding.
• Unplug before connecting Air-Powered Hand Tool.
• Do not pick up anything that is burning or smoking, such as cigarettes, matches,
or hot ashes.
• Do not use without Dirt Cup and/or Filters in place.
• WARNING: This product contains chemicals known to the State of California
to cause cancer, birth defects or reproductive harm. WASH HANDS AFTER
HANDLING.
3
CAUTION: TO REDUCE THE RISK OF DAMAGE:
• Avoid picking up hard, sharp objects with this product, as they may cause
damage.
• Store appropriately indoors in a dry place. Do not expose machine to freezing
temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
• With brushroll on, do not allow cleaner to sit in one location for an extended
period of time, as damage to floor can result.
WARNING:
• To reduce the risk of electric shock, this appliance has a polarized plug (one blade
is wider than the other). This plug will fit in a polarized outlet only one way. If the
plug does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a
qualified electrican to install the proper outlet. Do not change the plug in any way.
4
1. VACUUM ASSEMBLY
CARTON CONTENTS
A. Handle
B. Vacuum Base
C. Air-Powered Hand Tool*
D. Crevice Tool
E. Telescoping Wand
F. Screw (for assembly)
G. Dirt Cup
H Dusting/Upholstery Tool*
*Varies per model
Remove all parts from carton
and identify each item shown.
Make sure all parts are located
before disposing of packing
materials.
Additional parts may be ordered at
Hoover.com or call 1-800-944-9200.
1.1
A
ATTACH HANDLE
Note: Remove the screw located in the vacuum
base and set aside until instruction 1.3
1.2 Insert handle section into vacuum base. Push
down firmly.
1.3 Using a Phillips screwdriver, fasten (1) screw
behind handle into vacuum base.
B
1.2
C
E
F
D
G
H
1.3
ATTACH DIRT CUP
1.4 Place bottom of dirt cup into vacuum body first.
Pivot cup into vacuum. Dirt cup is secure when you
hear a click.
POSITION TOOLS
1.5 Attach bottom of Air-Powered Hand Tool (A)
and pivot into handle until secure.
1.6 Place Crevice Tool into Wand and slide into
tool storage area on left back side (B) of vacuum
and place Upholstery Tool on right back side (C) of
vacuum as shown.
(varies per model)
1.4
1.51.6
A
Actual model may vary from images shown.
5
B
C
2. HOW TO USE
VACUUM DESCRIPTION
1. Handle
2. ON/OFF Switch
3. Air-Powered Hand Tool **
4. Dirt Cup Release Button
5. Carry Handle
6. Rinsable Filter Access
7. Dirt Cup
8. Cord Rewind
9. Filter made with HEPA media
and Carbon Filter* Access
10. Stair Cleaning Handle
11. Headlight*
12. Height Adjustment
13. System Check Indicator
14. Crevice Tool (inside wand)
15. Telescoping Wand
16. Hose
17. Cord Rewind Pedal
18. Brushroll On/Off Pedal
(Suction Only Mode)
19. Furniture Guard
20. Dusting/ Upholstery Tool**
21. Hose Release Button
22. Hose Tube
23. Handle Release Pedal
SUCTION ONLY MODE/ BRUSHROLL SHUT-OFFON-OFF SWITCH
for bare floors and very high pile carpet
2.2
2.3
A
2.1
11
*Available on select models only
**Varies per model
12
10
1
2
3
4
5
6
7
8
9
2.3 For optimal cleaning performance on bare floors
and carpet with pile deeper than 1”, brushroll should
be turned off.
The vacuum is shipped with the brushroll in the ON
B
position. To turn brushroll OFF for Suction Only
Mode, step on pedal (B).
13
14
15
16
17
18
19
20
21
22
23
2.2 Plug cord into
electrical outlet.
To turn vacuum ON,
push ON/OFF button
(A) once.
To turn vacuum OFF,
push switch again.
CORD RELEASE
2.4 Grasp the end of the plug and pull to release cord
2.4
from cord reel.
IMPORTANT
When pulling on the cord, yellow tape will identify
when the cord is almost fully extended. When red
tape is visible on the cord, the cord has reached its full
length. Do not pull the cord past the red tape.
Actual model may vary from images shown.
IMPORTANT
Pedal (B) is inactive when the cleaner is in the
upright position.
!!
Brushroll should be in off position for cleaning of
high pile carpet deeper than 1”.
6
CAUTION
!!
CAUTION
Not to be used for grooming a pet.
TRANSPORTING CLEANER
2.5 To move your
cleaner from room to
room, put handle in
upright position, tilt
cleaner back on rear
wheels and push
forward.
2.5
CARPET HEIGHT ADJUSTMENT
2.7
A
HANDLE POSITIONS
2.6 The handle of your
cleaner has two
positions: 1) Upright for
storage and when using
cleaning tools. 2)
Operating position for
general operation on
carpets and floors.
Step on handle release
pedal to lower handle.
2.7 To adjust height setting, TURN knob (A) to
desired height setting.
For maximum cleaning performance, the following
carpet height settings are recommended:
where easier pushing effort is desired, while
maintaining good cleaning performance.
2.6
1
2
IMPORTANT
If the vacuum is difficult to push, turn knob to the
next higher setting.
7
Actual model may vary from images shown.
3. TOOLS
Tools allow for cleaning surfaces above the floor and for reaching hard to clean areas.
The vacuum is ready for tool use when handle is in upright position.
SELECT PROPER TOOL
(Tools may vary per model)
3.1
A
REMOVING HOSE
!!
To reduce the risk of personal injury - Unplug
before cleaning or servicing.
WARNING
3.2
B
C
D
3.2 When using cleaning
tools, place cleaner
handle in the upright
position. The agitator
brushroll will not rotate
when the cleaner is in
the upright position.
To remove hose for tool
use, press the hose
release button and pull
hose end out.
To lock back into place,
push hose into hose
tube until you hear a
click.
A. Use Dusting/ Upholstery Tool to clean
upholstered furniture, draperies, mattresses,
clothing, and carpeted stairs. (Tool varies per
model)
B. Air-Powered Hand Tool may be used for
upholstered furniture, draperies, mattresses,
clothing, and carpeted stairs. (Tool varies per
model)
C. Telescoping Wand is used to give extra length
to your hose. Use it with any of the above tools.
D. Crevice Tool may be used in tight spaces,
corners and along edges in such places as
dresser drawers, upholstered furniture, stairs and
baseboards.
ATTACH WAND AND TOOLS
(Tools may vary per model)
!
Unplug vacuum before connecting AirPowered Hand Tool.
3.3
A
B
WARNING
3.3 Attach tool or wand
to the hose (A).
Attach tool to wand (B)
by pushing it firmly onto
the wand.
Twist wand or tool
slightly to tighten or
loosen the connection.
To extend wand, twist
counter-clockwise to
the unlocked position,
extend wand & twist
clockwise until tight.
Reverse to collapse.
!
HOW TO CLEAN TOOLS
To clean Hose and Air-Powered Hand Tool, wipe
with a damp cloth. DO NOT submerge in water.
Other cleaning tools may be washed in warm water
with a mild detergent. Rinse and air dry 24 hours
before using.
Actual model may vary from images shown.
!!
CAUTION
Not to be used for grooming a pet.
8
STAIR CLEANING
3.4 Lift vacuum by Stair Cleaning Handle and
position on stairs. Clean forward to back. Never
leave the vacuum standing on stairs when not
cleaning.
3.5 Use the Hose and Air-Powered Hand Tool
(Tool varies per model) for stair cleaning. When using
tools, always ensure handle is in upright position.
!!
CAUTION
Use extra care when cleaning on stairs. To avoid personal injury or damage, and to prevent the cleaner
from falling, always place cleaner at bottom of stairs on floor. Do not place cleaner on stairs or furniture,
as it may result in injury or damage. When using tools, always ensure handle is in upright position.
3.4
3.5
CORD REWIND AND STORAGE
3.6
3.6 To return cord for storage, unplug from wall.
To return cord for storage, hold plug and press
down Cord Release Pedal (A) on side of cord reel.
A
!!
Hold plug when rewinding onto cord reel. Do not
allow plug to whip when rewinding.
WARNING
Actual model may vary from images shown.
9
4. MAINTENANCE
Familiarize yourself with these home maintenance tasks as proper use and
care of your vacuum will ensure continued cleaning effectiveness.
If appliance is not working as it should, has been dropped, damaged, left
outdoors, or dropped into water, take it to a service center prior to continuing use.
4.1 The System Check Indicator located at (A), alerts you to possible system
performance issues.
PROBLEMPOSSIBLE CAUSEPOSSIBLE SOLUTION
If System Check
Indicator is red:
Any other servicing should be done by an authorized service representative.
A Thermal Protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner will stop running.
If this happens proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet.
2. Empty dirt cup.
3. Inspect the nozzle inlet, hose connector, hose, dirt cup inlet, cyclonic filter, rinsable filter, and
HEPA filter for any obstructions. Clear obstructions if present.
When cleaner is unplugged and motor has cooled for 30 minutes, the thermal protector will deactivate
and cleaning may continue.
If the thermal protector continues to activate after following the above steps, your cleaner
needs servicing.
1. Rinsable filter and/or filter made
with HEPA media is dirty.
2. Dirt cup is full and/or clogged.
3. Brushroll and/or hose is
clogged.
!!
NOTICE
1. Clean rinsable filter and/or filter made with
HEPA media - reference pg. 11
2. Empty dirt cup - reference pg. 10
3. Check hose for clogging - reference pg 13.
Check brushroll for clogging - reference pg. 12.
4.1
A
DIRT CUP
When to Empty
4.2 To maintain optimal performance, empty the dirt cup before the dirt cup
reaches the max line (A). Place the vacuum in the upright position before
removing the dirt cup.
!!
WARNING
To reduce the risk of personal injury - Unplug before cleaning or
servicing. Do not use vacuum without dirt cup or filters in place.
Very fine materials, such as face powder or cornstarch, may seal the filter
and cause a reduction in performance. When using the vacuum for this
type of dust, empty the cup and clean the filters often.
Actual model may vary from images shown.
10
4.2
A
How to Empty
4.3 Press dirt cup
release button (A) and
pivot cup out.
4.4 Hold dirt cup over
trash receptacle, push
dirt cup door release
lever (B) to open dirt
cup door (C).
Close dirt cup door (C).
Press firmly to secure
lever.
4.5 Place bottom of dirt cup into vacuum body first. Pivot dirt cup into vacuum
body and press firmly until it locks into place.
4.3
A
4.4
B
FILTERS: When to Clean
To maintain optimal performance, filters should
be cleaned at least every two months under
normal use.
Rinsable Filter: How to Clean
Remove dirt cup as described in Fig. 4.3.
4.6 Pull up on dirt cup latch to open.
4.7 Pull on filter by the pocket to remove rinsable filter.
Hold filter under running water for at least two
minutes to remove dirt and debris. Squeeze filter
twice while underwater. Remove from water and
squeeze a final time to remove excess water.
!!
WARNING
To reduce the risk of personal injury - Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
4.6
4.5
C
4.7
IMPORTANT
Allow filter to dry completely before replacing.
Dry filter on edge so air circulates on both sides
of filter. This may take up to 48 hours.
Replace filter with pocket facing up.
Close lid securely by pushing until it clicks.
Replace dirt cup as described in Fig 4.5.
What to Buy: Rinsable Filter
When used and maintained properly, your Rinsable
Filter should not need replacement within the
warranty period. If desired, additional filter is
available at Hoover.com or call 1-800-944-9200.
Ask for Hoover
®
Part No. 303903001.
Filter Made With HEPA Media: How to Clean
!!
4.8 With fingers in slots, pull filter frame (A)
straight out. Hold filter over a trash receptacle
and tap out dirt and debris.
Slide back into position on vacuum and press
firmly.
To reduce the risk of personal injury - Unplug
before cleaning or servicing. Do not use
vacuum without dirt cup or filters in place.
WARNING
IMPORTANT
DO NOT RINSE OR WASH THE FILTER MADE WITH HEPA MEDIA.
What to Buy: Filter Made With HEPA Media
When used and maintained properly, your Filter should not need replacement
within the warranty period. If desired, additional filter is available at Hoover.com
or call 1-800-944-9200. Ask for Hoover
®
Part No. 305687001.
11
Actual model may vary from images shown.
4.8
A
Loading...
+ 23 hidden pages
You need points to download manuals.
1 point = 1 manual.
You can buy points or you can get point for every manual you upload.