Hoover FH50130 Owners Manual

OWNER’S

MANUAL

Operating and Servicing

Instructions

Español - página E1 ⁄ Frances - pag F1

www.hoover.com

CARPET WASHER

Please visit Hoover.com for video instructions for this cleaner.

IMPORTANT: READ CAREFULLY BEFORE ASSEMBLY AND USE.

Questions or concerns? For assistance, please call Customer Service at

1-800-944-9200 Mon-Fri 8am-7pm EST before returning this product to the store.

THIS PRODUCT IS INTENDED FOR HOUSEHOLD USE ONLY.

IF USED COMMERCIALLY WARRANTY IS VOID.

Thank you for choosing a HOOVER® product.

Please enter the complete model and Manufacturing Code in the spaces provided.

MODEL

MFG. CODE

1-800-944-9200

Hint: Attach your sales receipt to this owner’s manual. Verification of date of purchase may be required for warranty service of your HOOVER

Be sure to register your product online at Hoover.com or call 1-800-944-9200 to register by phone.

product.

Made in China

MANUFACTURING CODE

(Label located on rear of cleaner)

CONTENTS

Important Safeguards ..............................................................................................3

Carton Contents ....................................................................................................... 5

How To Assemble ..................................................................................................... 6

Features .................................................................................................................... 7

How To Use ............................................................................................................... 8

On-Off Pedal .......................................................................................................8

Handle Release Pedal ........................................................................................ 8

Transporting ........................................................................................................ 8

Carry Handles .....................................................................................................8

Clean Water/Solution Tank .................................................................................8

Dirty Water Tank ................................................................................................. 9

How To Clean ............................................................................................................ 10

Tools .......................................................................................................................... 12

Maintenance .............................................................................................................. 15

Nozzle .................................................................................................................15

Brushes ............................................................................................................... 15

Service....................................................................................................................... 16

Troubleshooting ....................................................................................................... 17

Cleaning Solutions ................................................................................................... 18

Warranty .................................................................................................................... 19

If you need assistance:

Visit our website at hoover.com for more information or for video instruction fot this carpet washer. Follow the authorized dealer locator link to find the Hoover® authorized dealer nearest you or call 1-800944-9200 for an automated referral of Hoover® authorized dealer locations (U.S. only) or to speak with a customer service representative; Mon- Fri 8am- 7pm EST.

PLEASE DO NOT RETURN THIS PRODUCT TO THE STORE.

IMPORTANT SAFETY INSTRUCTIONS

SAVE THESE INSTRUCTIONS

When using an electrical appliance, basic precautions should always be followed, including the following:

READ ALL INSTRUCTIONS BEFORE USING THIS APPLIANCE.

WARNING: TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY:

• Fully assemble before operating.

• Operate cleaner only at voltage specified on data plate on lower handle of cleaner.

• Do not leave appliance when plugged in. Unplug from outlet when not in use and

before cleaning or servicing.

• Use indoors only.

• Do not immerse. Use only on carpet moistened by cleaning process.

• Use only HOOVER

the “Cleaning Products” section of this manual.)

• Do not allow to be used as a toy. Not intended for use by children age 12 and

under. Close supervision is necessary when used near children. To avoid injury or damage, keep children away from product, and do not allow children to place fingers or other objects into any openings.

• Use only as described in this manual. Use only manufacturer’s recommended

attachments and products.

• Do not use with damaged cord or plug. If appliance is not working as it should,

has been dropped, damaged, left outdoors, or dropped into water, take it to a service center prior to continuing use.

• Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull

cord around sharp edges or corners. Do not place product on cord. Do not run appliance over cord. Keep cord away from heated surfaces.

• Do not unplug by pulling on cord. To unplug, grasp the plug, not the cord.

• Do not handle plug or appliance with wet hands.

• Do not put any object into openings. Do not use with any opening blocked; keep

free of dust, lint, hair, and anything that may reduce air flow.

• Keep hair, loose clothing, fingers, and all parts of body away from openings and

moving parts.

• Turn off all controls before unplugging.

• Use extra care when cleaning on stairs. To avoid personal injury or damage, and to

prevent the cleaner from falling, always place cleaner at bottom of stairs or on floor. Do not place cleaner on stairs or furniture, as it may result in injury or damage.

• Do not use to pick up flammable or combustible materials, such as gasoline, or

fine wood sandings, or use in areas where they may be present.

• Connect to a properly grounded outlet only. See Grounding Instructions.

• Unplug before connecting SpinScrub

• Do not pick up anything that is burning or smoking, such as cigarettes, matches,

or hot ashes.

• Do not use without Tanks or Filters in place.

• Do not clean over floor electrical outlets.

• WARNING: This product contains chemicals known to the State of California to cause

cancer, birth defects or reproductive harm.

cleaning products intended for use with this machine. (See

Hand Tool.

WASH HANDS AFTER HANDLING.

CAUTION - TO REDUCE THE RISK OF DAMAGE:

GROUNDING OUTLET BOX

• Avoid picking up hard, sharp objects with this product, as they may cause damage.

• Store appropriately indoors in a dry place. Do not expose machine to freezing

temperatures.

• Do not use sharp objects to clean out hose as they can cause damage.

• To assist in reducing drying time, be certain the area is well ventilated when using

detergents and other cleaners with this machine.

• To help prevent matting and resoiling, avoid contact with carpets until they are

dry. Keep children and pets away from carpets until they are completely dry.

• Do not store extractor with solution in tanks.

• With brushes on, do not allow cleaner to sit in one location for an extended

period of time, as damage to the floor can result.

• Do not use this extractor and accessories on hard floors. Using this machine on

hard floors without proper attachment may scratch or damage your floor.

• Water will drip from the brushes and underside of the product after use and may

puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and remove to a hard surface and (b) place unit on absorbent material (such as a towel) to soak up drips.

GROUNDING INSTRUCTIONS

This appliance must be grounded. If it should malfunction or breakdown,

grounding provides a path of least resistance for electric current to reduce

the risk of electric shock. This appliance is equipped with a cord having an

equipment-grounding conductor (C) and grounding plug (A). The plug must be

inserted into an appropriate outlet (B) that is properly installed and grounded in

accordance with all local codes and ordinances.

WARNING: Improper connection of the equipment-grounding conductor

can result in the risk of electric shock. Check with a qualified electrician or service

person if you are in doubt as to whether the outlet is properly grounded. Do not

modify the plug provided with the appliance - if it will not fit the outlet, have a

proper outlet installed by a qualified electrician. This appliance is for use on a

nominal 120-volt circuit and has a grounding plug that looks like the plug (A)

illustrated in Fig. 1. A temporary adapter (D) may be used to connect this plug to

a 2-pole receptacle (E) if a properly grounded outlet is not available (Fig. 2). The

temporary adapter should be used only until a properly grounded outlet (B) can

be installed by a qualified electrician (Fig. 1). The green colored rigid ear, lug, or

the like (F) extending from the adapter must be connected to a permanent ground

(G) such as a properly grounded outlet box cover (Fig. 2). Whenever the adapter

is used, it must be held in place by a metal screw. NOTE: In Canada, the use of a

temporary adapter is not permitted by the Canadian Electrical Code.

CARTON CONTENTS

REMOVE ALL PARTS FROM CARTON AND IDENTIFY EACH ITEM SHOWN. MAKE SURE ALL PARTS ARE LOCATED BEFORE DISPOSING OF PACKING MATERIALS.

*Available on select models only. Accessories not included with your model may be purchased separately

by visiting hoover.com.

A. Carpet Washer B. Water/Solution Tank C. Upper Handle D. Handle Screws E. SpinScrub

(Pre-assembled in unit) F. Mesh Tool Storage Bag*

Brush Assembly

Tools Included in Mesh Bag

G. Upholstery Tool H. Accessory Hose

Actual model may vary from images shown.

HOW TO ASSEMBLE

NOTE: PHILLIPS SCREWDRIVER NEEDED FOR ASSEMBLY.

ATTACH HANDLE

1. Position upper handle and slide down into carpet washer base (Fig. 2)

2. Insert both screws and tighten with screwdriver (Fig. 3).

PLACE SOLUTION/ WATER TANK

3. Position bottom of tank onto Carpet Washer (Fig. 4).

4. Push tank handle while supporting back of cleaner with other hand until Solution Tank clicks into place (Fig. 5).

5. Check to make sure tank is securely latched.

STORE TOOLS

6. Place tools and hose into Mesh Tool Storage bag provided.

7. Mesh Tool Storage Bag should not be hung on the Carpet Washer while the Carpet Washer is in use.

8. Mesh Tool Storage Bag can be conveniently stored either on the back of the unit or hung elsewhere by the provided hook (Fig. 6).

CORD STORAGE

9. Wrap cord around cord hooks for convenient storage. Attach the plug end to cord.

Actual model may vary from images shown.

FEATURES

FRONT

BACK

LIST OF FEATURES

1. Solution Trigger: Press to release cleaning solution

2. ON/OFF Pedal

3. Clean Water/Solution Tank

4. Dirty Water Tank

5. Dirty Water Tank Latch

6. Solution Tube Connection Port

7. Nozzle

8. Accessory Hose Connection Port

9. Cord Storage Hook

10. Cord Storage Hook

(Does not rotate)

11. Handle Release Pedal

12. Cord Clip

Actual model may vary from images shown.

HOW TO USE

! !

Do not use this carpet washer and accesories on hard floors. Using this machine on hard floors may scratch or damage your floor.

CAUTION

ON-OFF PEDAL (Fig. 13, A)

1. To turn cleaner ON, step on pedal.

2. To turn cleaner OFF, step on pedal agian.

HANDLE RELEASE PEDAL (Fig 13, B)

1. Grasp handle.

2. Step on Handle Release Pedal to release lower handle to operating position.

3. Do not release grip on handle until handle is returned into locked upright position

TRANSPORTING

1. To move your cleaner from room to room, put handle in upright and locked position.

2. Tilt cleaner back on wheels and push forward (Fig. 14).

CARRY HANDLES

The carpet washer may also be lifted by any of several carry handles as shown. Be sure tanks are properly latched in place before attempting to lift (Fig 15). A. Upper Handle B. Solution Tank Handle C. Dirty Water Tank Handle D. Solution Tank Shelf

How to Fill

1. Turn off and unplug cleaner from electrical

outlet.

2. To remove tank, press down on Solution Tank

Latch and pull forward. (Fig. 17).

3. Fill Clean Water Tank (Fig. 18) with hot tap

water to fill line. The use of hot water as opposed to cold, significantly improves cleaning performance.

4. Fill Solution Tank (Fig. 16-E) with Hoover Clean Plus 2X Solution or any other Hoover

solution by following the directions on the cleaning solution bottle (see “Cleaning Solutions” page 19 in manual for details). Replace container cap and tighten.

! !

Detergents contain Anionic and Nonionic Surfactants. Avoid contact with eyes and skin. In case of contact with eyes, flush with cold water for 15 minutes. In case of contact with skin, wash with water. If irritation persists, call a physician.

CAUTION

! !

Do not fill with water above 140°F (60°C).

5. Place Solution/Water Tank back on to the unit

using the method described on page 6. NOTE: There may be a small amount of water on

the base when the tank is removed from the unit. This is a normal condition.

Actual model may vary from images shown.

CAUTION

! !

Use only HOOVER® cleaning products intended for use with this machine. (See the “Cleaning Solutions” section in this manual for details) They are specially formulated for use with your cleaner. Non-Hoover cleaning solutions may harm the machine and void the warranty.

WARNING

DIRTY WATER TANK

The Dirty Water Tank holds the dirty water that is

picked up from the surface being cleaned.

When the Dirty Water Tank is full, the automatic

shut-off will engage, suction will stop and the tank must be emptied (see Automatic Shut-Off section).

How to Empty

1. Turn cleaner off and unplug from electrical outlet.

2. Release Dirty Water Tank Latch (Fig. 20).

3. Grab the Dirty Water Tank Handle and remove from carpet washer (Fig. 21).

4. Unplug the Quick Spout Pour Cap (A), rotate it away from drain hole and empty the Tank (Fig. 22).

20 21

22 23

IMPORTANT

Be sure to replace the Quick Spout Pour Cap to ensure proper suction.

5. Place Recovery Tank back on to cleaner making sure to do so with the retaining features (B, Fig. 23) pointing down to ensure proper sealing.

6. Latch the Recovery Tank back in to place.

For full suction, it is important that the Dirty Water Tank is properly secured before cleaning.

IMPORTANT

How to Clean

1. Empty Dirty Water Tank.

2. Place on flat surface and unlatch Dirty Water

Tank lid latch located below the Quick Spout Pour Cap (Fig. 24).

3. Pivot and lift off Dirty Water Tank Lid (Fig. 25).

4. Remove lint from filter screen located on the

bottom of the Dirty Water Tank Lid (C, Fig. 25).

5. Rinse debris from Dirty Water Tank Lid and Dirty

Water Tank bottom (Fig. 26).

6. Insert tabs on Dirty Water Tank lid and reattach

lid to Dirty Water Tank bottom (D, Fig. 27a).

7. Reattach Recovery Tank Lid Latch.

IMPORTANT

Regarding Dirty Water Tank Lid: For full suction

it is important that the dirty water tank lid is securely in place. If misplaced, poor to no suction will result (see Figs. 27b, 27c).

AUTOMATIC SHUT OFF

When the Dirty Water Tank is full the yellow float disk will rise and shut off the carpet washer’s suction.

The carpet washer will no longer pick up dirty water and the motor sound will become noticeably higher in pitch.

27b

NOT SECURED

When this happens, turn carpet washer off and empty Dirty Water Tank before continuing use.

Check Clean Water/Solution Tank also; it may need to be refilled.

Do not use without float and float retainer in place. If broken or dislodged, take to an Authorized Dealer

for repair.

Actual model may vary from images shown.

27a

27c

NOT SECURED

HOW TO CLEAN

BEFORE YOU BEGIN CLEANING

1. Vacuum thoroughly - For carpet, use a HOOVER

vacuum cleaner with an agitator for best results. Vacuum upholstery with a vacuum cleaner with cleaning tool attachments. Use a crevice tool to reach into tufts and folds. Do not use the carpet cleaner as a dry vacuum cleaner.

2. For upholstery, check cleaning code - Use your

HOOVER fabric is marked with a “W” (for “wet” clean) or “S/W” (for “solvent/dry” or “wet” clean). Do not clean fabric marked “S” (“solvent/dry” clean only). If your upholstery does not have a code, seek professional assistance.

3. Test for colorfastness - Wet a white absorbent

cloth with the solution. In a small, hidden area, gently rub the surface with the dampened cloth. Wait ten minutes and check for color removal or bleed with white paper towel or cloth. If surface has more than one color, check all colors.

carpet washer only if the upholstery

WASHING CARPET

Read “Before You Begin Cleaning” instructions.

1. Fill Clean Water Tank according to instructions (Pg. 8).

2. Fill solution tank with Hoover® solution according to

instructions (Pg. 8).

3. Dry hands and plug cord into a properly grounded outlet.

4. When cleaning entire floor, move furniture out of area to be cleaned (may not be necessary if only

high traffic areas are to be cleaned). For furniture too heavy to move, place aluminum foil or wax paper under legs. This will prevent wood finishes from staining carpet. Pin up furniture skirts and draperies.

5. Pretreat spots and heavy traffic areas with an appropriate Hoover Cleaning Solutions, see “Cleaning Solutions” section. Follow Directions on bottle.

*Available at additional cost if not included with your model.

6. To prevent staining, use plastic or aluminum foil to protect wood or metal surfaces from possible water spray.

7. To avoid wetting and possible damage to wood floors underneath area rugs/carpet, either move area rugs/ carpet to a non-wood hard floor surface or place waterproof material (e.g. plastic) underneath them before cleaning.

! !

Do not clean over floor electrical outlets.

NOTE: To avoid walking on damp carpet, start at the end of the room farthest from the door or path to sink where tanks will be emptied and filled.

4. Step on handle release pedal and lower handle to operating position.

CAUTION

Step 1

5. Turn cleaner ON.

6. Squeeze trigger to apply cleaning solution and slowly push cleaner forward (equals one wet stroke) (Fig. 29).

7. Continue to squeeze trigger and slowly pull cleaner back toward you (second wet stroke).

Actual model may vary from images shown.

Step 2

8. Release trigger and slowly push cleaner forward over area just sprayed with solution (dry stroke). Then slowly pull cleaner back toward you without squeezing trigger (dry stroke). Continue using dry strokes until little water is visible passing through the Dirty Water Tank lid (Pass over the same area a minimum of 4 times = 2 while squeezing the trigger and 2 without).

NOTE: For best results, use straight, parallel strokes. Overlap strokes by 1 inch to help prevent streaking.

9. Keep nozzle flat on floor for both forward and reverse strokes.

For best cleaning results and to aid in faster drying of carpet, end with more dry strokes. (Continue using dry strokes until little water is visible passing through the Dirty Water Tank lid.)

Empty Dirty Water Tank when the motor sound becomes higher pitched and there is a loss in suction (see “Automatic shut-off”).

When finished cleaning, follow “After Cleaning” instructions on page 12.

AFTER USE

Allow carpet or upholstery to dry. To help prevent matting and resoiling the carpet, keep children and pets away from surface until it is completely dry. If it is necessary to walk on damp carpet, place towels or white cloths on the traffic areas.

If furniture must be replaced before the carpet is dry, place plastic or aluminum foil under legs of furniture so metal slides or wood finishes will not stain the carpet.

1. See “Dirty Water Tank: How to Empty” page 9.

2. See “Dirty Water Tank: How to Clean” page 9.

NOTE: Let Dirty Water Tank and Dirty Water Tank Lid air dry before Carpet Washer is stored.

3. See “Cleaning Nozzle” page 16.

4. See “Cleaning Brushes” page 16.

5. Remove lint from filter screen located behind

nozzle.

10. For best cleaning results, Hoover recommends to rinse the carpet with water only. This will remove residual carpet cleaning solution from your carpets. To Rinse with water only, fill

solution tank with hot tap water only and repeat cleaning strokes.

11. For heavily soiled areas, repeat cleaning

process. Avoid saturating carpet. NOTE: It is best to alternate wet and dry strokes

as described above.

IMPORTANT

To avoid saturating carpet, do not use more than 4 wet strokes over one area. Always end with dry strokes.

IMPORTANT

When brushes seem to be rotating slowly, disconnect cleaner from electical outlet and check and clean the screen behind the nozzle (see arrow below).

! !

Water will drip from the brushes and underside of the product after use and may puddle. To avoid damage to wood and laminate flooring and to avoid potential slip hazard, after use (a) do not leave the product on wood and laminate surfaces and remove to a hard surface and (b) place unit on absorbent material (such as a towel) to soak up drips.

CAUTION

Actual model may vary from images shown.

TOOLS

CONNECT HOSE FOR TOOL USE

! !

Always turn off appliance before connecting or disconnecting hose.

CAUTION

How to Attach

1. Open Accessory Hose Suction Port (A, Fig. 31). Insert hose end, aligning the indicator with the unlock arrows.

2. Rotate clockwise to lock position (B, Fig. 31).

3. Hold open the Accessory Hose Solution Port door (Fig. 32).

4. Plug Accessory Hose Solution Tube connector firmly into Hose Solution Port (C, Fig. 32).

How to Remove

1. Disconnect Accessory Hose Solution Tube Connector from Accessory Hose Solution Port by pulling up firmly. Do not pull on tube, this may cause damage. Accessory port door will automatically close.

TOOLS (*Available on select models only.)

A. Stair Tool*: 6 inches wide, 2 built-in rows of brushes to help provide the scrubbing action that some spots may need for removal on your carpeted stairs.

B. Upholstery Tool has a built-in brush to help provide the scrubbing action some spots may need for removal.

C. SpinScrub for extra scrubbing action on small carpet areas, carpeted stairs and upholstery. For some models, the brush(s) can be removed for converting to the scrub module.

D. Crevice Tool*: Great for use around baseboards and those hard to reach areas.

NOTE: Tools located and stored in Mesh Bag.

How to Attach Tools

Hand Tool* has rotating brush(s)

2. Rotate accessory Hose end counterclockwise from the locked position to the unlocked position and remove by pulling out.

3. Snap Accessory Hose Suction Port door back into place. Make sure to snap both sides to unsure proper suction, unit may lose suction if not closed properly.

! !

To reduce the risk of injury from moving parts - Unplug before connecting SpinScrub Hand tool.

Not to be used for grooming pets.

1. To ensure maximum performance and to protect your carpet, be sure to place the handle in the upright position while using

the accessory hose. Placing handle in the upright position

shuts off the SpinScrub brushes. NOTE: All tools attach to the hose in the same manner:

2. Connect tool to hose by sliding it onto connector until the tab locks it securely (E, Fig. 34).

3. Using your thumb, push forward and up on the latch to remove tool (F, Fig. 34).

Actual model may vary from images shown.

CAUTION

+ 27 hidden pages