Hoover DM6185T, DUST MANAGER User Manual
USER
INSTRUCTIONS
DUST MANAGER
GENERATION FUTURE
0565-5289.indd 1 28/11/2007 15:43:21
- 2 -
IMPORTANT SAFETY REMINDERS
User’s manual - This cleaner should only be used
for its intended purpose as described in these
instructions. Ensure that these are fully understood
before operating this appliance.
Only use attachments recommended or supplied by
Hoover.
When using cleaning tools ensure that the cleaner is
kept in the upright (parked) position. This will avoid
possible damage to the carpet or oor covering.
When cleaning stairs DO NOT position the cleaner
above you.
Safety with Children, Elderly or the Inrm: Do not let
children play with the appliance or its controls. Please
supervise the use of the appliance by older children,
the elderly and the inrm.
STATIC ELECTRICITY. Some carpets can cause a
small build up of static electricity.
Any static discharge is not hazardous to health.
DO NOT use your cleaner out of doors or on any
wet surface or for wet pick up.
Keep hands, feet, loose clothing and hair away from
rotating brushes.
DO NOT pick up hard or sharp objects, matches,
cigarette ends or other similar items.
DO NOT pick up ammable liquids such as cleaning
uids, petrol etc. or their vapours.
Aerosol sprays may be ammable. DO NOT spray
near cleaner.
SUPPLY CORD. DO NOT run over the supply
cord when using your cleaner or remove the plug by
pulling on the supply cord.
FAULTS. DO NOT continue to use your cleaner if
it appears to be faulty. If the supply cord is damaged
stop using the cleaner IMMEDIATELY.
The supply cord must be replaced by an authorised
Hoover service engineer to avoid a safety hazard.
AFTER USE. Switch the cleaner off and remove the
plug from the electricity supply.
Always switch off and remove the plug before
cleaning the appliance or attempting any maintenance
task.
HOOVER SERVICE. To ensure the continued
safe and efcient operation of this appliance we
recommend that any servicing or repairs are only
carried out by an authorised Hoover service engineer.
Genuine Hoover Spares and Consumables
Always replace parts with Genuine Hoover spares and consumables.
HOOVER SERVICE 08705 400 600
HOOVER SPARES 01204 556 111
Congratulations on the purchase of your new
Hoover Dust Manager.
This highly advanced machine makes cleaning
easier and more efcient.
You’ll nd it kinder to your carpets - and to
you!
Please take the time to read this manual
carefully.
You’ll be ready to make the most of the special
features only the new Hoover Dust Manager
can offer!
WARNING!
ELECTRICITY CAN BE
EXTREMELY DANGEROUS
This appliance is double insulated and must
not be earthed.
The plug is tted with a 13 amp fuse.
IMPORTANT: The wires in the mains lead
are coloured in accordance with the following
code:
Blue - NEUTRAL
Brown - LIVE
- 2 -
DUST MANAGER
0565-5289.indd 2 28/11/2007 15:43:21
- 3 -
DUST MANAGER
GETTING TO KNOW YOUR CLEANER*
Handle
On/Off switch
Cleaner body
Door
Door release
Carpet Care
Control Selector
Effortless
cleaning with
your new
Hoover
DUST
MANAGER
When rst unpacking
your cleaner please check
all items are included:
Cleaner Body
Handle with securing screw
Crevice tool
Dusting Brush
Grooming Nozzle
Pet Hair and Allergen Remover*
If any parts are missing
contact your retailer or
call the Hoover helpline
on 08705 400 600
Dusting brush
Grooming nozzle
Hose hook
Pet Hair &
Allergen
Remover*
Cord storage
swivel hook
Supply cord
Flexible hose
Hose supports
Exhaust lter cover
(behind stabiliser)
Carrying handle
Hose retainer
Long Crevice Tool
- 3 -
Cleaner lock
release
* Feature may vary according to model
Stabiliser
Dust
Cassette
0565-5289.indd 3 28/11/2007 15:43:22
- 4 -
1
PREPARING TO USE YOUR CLEANER
POWER SWITCH SETTING
CARPET CARE CONTROL
SELECTOR
CLEANER LOCK RELEASE
Insert handle into body of cleaner. Slide into position.
Ensure handle is ush with body of cleaner.
Tighten large screw (pre-tted to handle upper hole).
Insert small screw into handle lower hole and tighten.
Check that the dust container is tted.
Switching on and off
Push bottom of the On/Off switch to switch on.
Push top of the On/Off switch to switch off.
The carpet care control selector raises or lowers the
height of the nozzle. The nozzle height will not change
until the handle is released. Try various settings until you
get the best results for each of your carpets.
Ensure that the cleaner
is in an upright (parked)
position.
Slide selector to the
position best suited to
depth of carpet pile.
Using this cleaner for carpets with pile greater than 30mm
is not recommended.
Unlock the cleaner by pressing
down on pedal with foot. For
oor cleaning under low
furniture and some
maintenance tasks
simply press the
pedal again and
lower handle
to the oor.
IMPORTANT: When cleaning hard
oors such as vinyl or linoleum, move
the “Carpet Care Control Selector” to
the Hard oor position. Failure to do so
may cause damage to the oor surface.
!
- 4 -
0565-5289.indd 4 28/11/2007 15:43:22
Loading...