Honeywell VISTA-250BPT Specsheet

Control Panels

VISTA-250BPT

VISTA® Partitioned Commercial Burglary Alarm

Control Panels

The VISTA-250BPT is a powerful member of the Honeywell

Home family of commercial alarm panels, integrating burglary,

CCTV and access control functions. Many features are available

that extend the applications of the VISTA-250BPT while simplifying

end-user operation.

The VISTA-250BPT is listed for residential burglary, residential fire

and commercial burglary applications (see agency listings in

this document for more details). It is compatible with a wide range

of AlarmNet® communications products for alarm reporting,

uploading/downloading and remote services.

FEATURES

• Provides nine onboard st yle-B

hardwired zones

• Supports up to 241 additional zones

using a built-in polling (multiplex)

loop interface

• Supports up to 249 wireless zones

using up to two 580 0 Series wireless

receivers (fewer if using hardwired

and/or polling loop zones)

• Provides 1 power-limited bell circuit

delivering 1.7Amp (max) at 12VDC

• Provides the ability to control eight

separate partitions independently,

each functioning as if it had its own

separate control

• Accommodates 250 user codes with

seven authority levels per partition

• Accommodates 32 keypad macro

commands per system

• Keeps a log of up to 1,000 events

• Optiflex CCTV support

• Supports up to 16 two-wire smoke

detectors on zone 1

• Zone 7 may be used for keyswitch

arming/disarming

®

• Integrates with WIN-PAK

control systems to provide increased

users, event log and scheduling

®

• Supports V-Plex

VISTAKEY access control (up to

15 doors and 500 cards)

• Supports up to 96

programmable outputs

• Supports up to six touchscreen

Advanced User Interface (AUI)

devices (6272 or later)

• Smoke detector reset at keypad

• Quick exit

• Group bypass

• Arm faulted

• Event arming

addressable

access

• Carbon monoxide (CO)

zone type support

• Expanded high-speed RS-232

capability for third party interface

and automation

• Internet upload/download over

AlarmNet GSM and/or IP

communicators over the panel’s

keypad (ECP) bus

• Ringback support for AlarmNet

communicators (confirmation

of closing report)

• 24 -hour dialer test support

for AlarmNet devices

• Supports V-Plex Smart Contact

feature for improved responsiveness

on systems with many V-Plex zones

• Telco line cut detection

VISTA-250BPT

VISTA® Partitioned Commercial Burglary Alarm Control Panels

ADDITIONAL FEATURES

Basic Hardwired Zones

• EOLR supervision (optional
for zones 2-8) supporting
N.O. or N.C. sensors (EOLR
supervision required for fire and
UL burglary installations)

• Individually assignable to one
of eight partitions

• Up to 16 two-wire smoke detectors
on zone 1

• Four-wire smoke or heat detectors on
zones 1-8 (power to four-wire smoke
detectors must be super vised with an
EOL device). Listed for residential
fire only.

Polling Loop Expansion

Supports up to 241 additional zones

using a built-in polling (multiplex) loop
interface. Polling loop zones have the
following characteristics:

• Must use V-Plex devices

• Supervised by control panel

• Individually assignable to one
of eight partitions

• Supports VSI module

• Supports 4297 Expander Module

• Maximum wiring distance -
12,00 0 feet

Wireless Expansion

• Supports up to 249 wireless zones
using up to two 5800 Series wireless

receivers (fewer if using hardwire
and/or polling loop zones).

Wireless zones have the following
characteristics:

• Supervised by control panel for
check-in signals (except certain
nonsupervised transmitters)

• Tamper protection for supervised
transmitters

• Individually assignable to one
of eight partitions

Scheduling

Provides the following scheduling
capabilities:

• Open/Close Schedules (for control of
arming/disarming and reporting)

• Holiday Schedules (allows different
time windows for open/close
schedules)

• Timed Events (for activation of relays,
auto-bypassing and unbypassing,
auto-arming and disarming, etc.)

• Access Schedules (for limiting system
access to users by time)

Eight Partitions

• Provides the ability to control eight
separate areas independently,
each functioning as if it had its own
separate control

Partitioning features include:

• A Common Lobby partition (1-8),
which can be programmed to arm
automatically when the last partition
that shares the common lobby is
armed, and to disarm when the first
partition that shares the common
lobby is disarmed

• A Master partition (9), used strictly
to assign keypads for the purpose
of viewing the status of all eight
partitions at the same time
(master keypads)

• All zones assignable to one
of eight partitions

• Keypads assignable to one of eight
partitions or to Master partition
9 to view system status

• Abilit y to assign relays to one or all
eight partitions

• Ability to display fire and/or burglary
and panic and/or trouble conditions
at all other partitions’ keypads
(selectable option)

• Individually programmable account
number, entry delay and exit delay
by partition

V-Plex Loop

4101SN

Relay Module

NOTE: Please refer to the website (www. security.honeywellhome.com/hsc) for the latest product information.

DT7500SN

V-Plex DUAL TEC

Motion Sensor

FG1625SN Glassbreak

PC ConnectionSerial Printer

4208EX Eight-zone

V-Plex Expander and

4208SN Serialized Eight-

zone Remote Point Module

710

Strobe

Light

748

RS-232

Horn

4293SN Adapters

Notification

Appliances

VISTA-250BPT

ECP Bus

7847i

Series Smoke Detectors

6160

Console

Keyswitch

Option

4146

or

GSMV

5193

4204
Relay

Module

Phone Line to Central Station

or

iGSMV

5881
Wireless
Receiver