EXTERNAL THREADED END-CONNECTION
APPLICATION
These three-port mixing valves are used for modulating
control of hot or chilled water in heating, ventilation and air
conditioning systems and can be operated by electric linear
actuators as ML6420/6425, ML7420/7425, ML6421/7421 or
by pneumatic actuators MP953.
V5013E
LINEAR VALVE PN16
PRODUCT DATA
FEATURES
• Brass body with external threaded end connections
• Low seat leakage rate
• Self-adjusting packing
• Accurate positioning to ensure state-of-the-art
temperature control
• Directly-coupled electric and pneumatic actuators
for easy mounting
• Constant total flow throughout full plug travel
SPECIFICATIONS
Action: Stem up to close port A-AB
Nominal pressure rating: PN16
Flow characteristic: equal percentage: port A-AB
linear: port B-AB
Rangeability: 50:1
Leakage rate:
Stroke: 20 mm
Valve body:
Pipe connections: External threading as per
Material: Brass
Dimensions: See Fig. 1 on page 4
Trim:
Seat: DN15: stainless steel
DN20...50: body integrated
Plug: Brass
Stem: Stainless steel
Packing: Spring-loaded carbon fiber
Medium temperature and
pressure:
Water and steam
Max. temperature differential in alternating hot/cold
water use:
≤0.05% of k
ISO228
reinforced PTFE V-rings
2 to 120 °C max. 1600 kPa
120 to 170 °C max. 1490 kPa
60 K
vs
Registered Trademark EN0B-0446GE51 R0407
Copyright © 2007 Honeywell Inc.
•
All Rights Reserved
V5013E
SIZES AND FLOW CAPACITIES
Table 1. Size and flow capacity (in m3/h)
order number valve size kVS m3/h
V5013E1063 DN15 2.5
V5013E1071 DN15 4
V5013E1089 DN20 6.3
V5013E1097 DN25 10
V5013E1105 DN32 16
V5013E1113 DN40 25
V5013E1121 DN50 40
INSTALLATION
Water should meet VDI2035 requirements.
Do not install valve with stem below the horizontal.
Fluid flow must correspond with the arrow direction on the
valve body.
The installation of a strainer is strongly recommended.
The valve should be installed as stress-free as possible.
SPARE PARTS
Repair packing kit, DN15...50: Order number 0901787
CLOSE-OFF PRESSURE RATINGS
Electric Actuators
Table 2. Close-off pressure ratings (in kPa) of electric actuators
actuator valve size
type force DN15 DN20 DN25 DN32 DN40 DN50
ML6420 / ML6425
ML7420 / ML7425
M6421 / M7421 1800 N - - 1600 1600 1500 850
Pneumatic Actuators MP953
600 N 1600 1600 1000 700 460 260
Table 3. Close-off pressure ratings (in kPa) of pneumatic actuators MP953
actuator valve size
type spring range
MP953C5001 14...48 kPa
MP953C5027
MP953A5005
MP953C5019 55...83 kPa
MP953C5068 14...48 kPa
MP953C5084
MP953A5039
MP953C5076 55...83 kPa
MP953D5025 27...76 kPa
MP953D5009
MP953B5003
27...76 kPa
27...76 kPa
55...83 kPa
air
pressure
0 kPa
115 kPa
closed seat DN15 DN20 DN25 DN32 DN40 DN50
upper
lower
lower
upper
150
1600
800
1150
1600
860
1550
1600
1600
1600
1600
1600
1600
1600
1600
1600
--
--
310
530
950
380
650
1600
1550
1600
1600
1600
840
1480
1050
1490
--
--
180
350
620
240
420
1600
1030
1500
1600
1190
570
990
720
1490
--
--
90
200
370
130
240
1600
630
950
1470
750
340
600
440
920
--
--
30
100
220
60
130
1130
400
600
970
460
200
370
260
600
--
--
--
--
--
--
50
630
200
320
520
250
90
190
130
320
EN0B-0446GE51 R0407 2
V5013E
ACCESSORIES
Valves V5013E require the use of three connection sets.
connection pipe size DN order number connection set description
internal
thread
G 1/2"
G 3/4"
G 1"
G 1-1/4"
G 1-1/2"
G 2"
a c
15
20
25
32
40
50
dimensions of connection sets
AC-15TF
AC-20TF
AC-25TF
AC-32TF
AC-40TF
AC-50TF
G 1-1/8"
G 1-1/4"
G 1-1/2”
G 2”
G 2-1/4”
G 2-3/4"
consisting of 1 union nut,
G 1/2"
G 3/4"
G 1-1/4"
G 1-1/2"
G 1"
G 2"
1 tailpiece, and 1 gasket
order number
AC-15TF
AC-20TF
AC-25TF
AC-32TF
AC-40TF
AC-50TF
3 EN0B-0408GE51 R0407
V5013E
DIMENSIONS
stroke
A
Fig. 1. Dimensions
Y1,2
B
C
Y1
Without stem
extension for
ML6420/25
ML7420/25
M6421, M7421
MP953A,C 5”
MP953B,D
Y2
With stem
extension for
MP953A,C 8”
Table 4. Dimensions (in mm)
valve size A B C
Y1 Y2
stem up
DN15 80 40 55
DN20 90 40 55
DN25 110 40 55
DN32 120 40 55
107 151
DN40 130 40 60
DN50 150 40 65
For actuator dimensions, please refer to:
ML6420A3072 .................... EN0B-0411GE51
ML6420A / ML6425A,B....... EN0B-0351GE51
ML7420 / ML7425............... EN0B-0624GE02
M6421................................. EN0B-0414GE51
M7421................................. EN0B-0416GE51
MP953 ................................ EN0B-0552GE51
Manufactured for and on behalf of the Environmental and Combustion Controls Division of Honeywell Technologies Sàrl, Ecublens, Route du Bois 37, Switzerland by its Authorized Representative:
Automation and Control Solutions
Honeywell GmbH
Böblinger Straße 17
D-71101 Schönaich
Phone: (49) 7031 63701
Fax: (49) 7031 637493
http://europe.hbc.honeywell.com
Subject to change without notice. Printed in Germany
EN0B-0446GE51 R0407
Loading...