Honeywell V5011R User Manual

APPLICATION

hot water;
chilled water;
saturated steam;
superheated steam;
domestic hot water;
V5011R
INTERNAL THREADED END-CONNECTION
LINEAR VALVE PN16
PRODUCT DATA

FEATURES

Brass body with internal threaded end connections
Low seat leakage rate
Self-adjusting packing
Accurate positioning to ensure state-of-the-art
temperature control
Directly-coupled electric and pneumatic actuators
for easy mounting

SPECIFICATIONS

Action: Stem down to close Nominal pressure rating: PN16 Flow characteristic: equal percentage Rangeability: 50:1 Leakage rate: Stroke: 20 mm Valve body:
Pipe connections: Internal threading as per ISO228
Material: Brass Dimensions: See Fig. 1 on page 3 Trim:
Seat: DN15: stainless steel
Plug: Brass
Stem: Stainless steel Packing: Spring-loaded carbon fiber
Medium temperature and pressure:
Water
Steam Max. temperature differen-
tial in alternating hot/cold water use: 60 K
0.05% of k
DN20...50: body integrated
reinforced PTFE V-rings
2 to 120 °C max. 1600 kPa 120 to 170 °C max. 1490 kPa
< 120 °C max. 150 kPa
vs
in heating, ventilation, air conditioning systems, and open circuits.
Operated by
electric linear actuators (e.g. ML6420/25, ML7420/25, M6421, and M7421) and
pneumatic actuators (e.g. MP953).
Registered Trademark EN0B-0064GE51 R0403 Copyright © 2003 Honeywell Inc.
All Rights Reserved
V5011R

SIZES AND FLOW CAPACITIES

Table 1. Size and flow capacity (in m3/h)
Order Number Valve size kVS m3/h
V5011R1000 DN15 0.63
V5011R1018 DN15 1
V5011R1026 DN15 1.6
V5011R1034 DN15 2.5
V5011R1042 DN15 4
V5011R1059 DN20 6.3
V5011R1067 DN25 10
V5011R1075 DN32 16
V5011R1083 DN40 25
V5011R1091 DN50 40

INSTALLATION

Water should meet VDI2035 requirements.
Do not install valve with stem below the horizontal.
Fluid flow must correspond with the arrow direction on the valve body.
The installation of a strainer is strongly recommended.

SPARE PARTS

Repair packing kit for red-brass models (old) – RG5 DN15...32: Order number 0901786 DN40...50: Order number 0901787 Repair packing kit for yellow-brass models (new) – DR DN15...50: Order number 0901787

CLOSE-OFF PRESSURE RATINGS

Electric Actuators

Table 2. Close-off pressure ratings (in kPa) of electric actuators
actuator valve size
type force DN15 DN20 DN25 DN32 DN40 DN50
ML6420 / ML6425 ML7420 / ML7425
M6421 / M7421 1800 N - - 1600 1600 1500 850
600 N 1600 1600 1000 700 460 260

Pneumatic Actuators MP953

Table 3. Close-off pressure ratings (in kPa) of pneumatic actuators MP953
actuator valve size
type spring range
MP953C5001 14...48 kPa 1600 1600 1400 760 520 280 140
MP953C5027 MP953A5005
MP953C5019 55...83 kPa 1600 860 490 240 150 50 10
MP953C5068 14...48 kPa 1600 1600 1600 1600 1600 1130 630
MP953C5084 MP953A5039
MP953C5076 55...83 kPa
MP953D5025 27...76 kPa 1600 1600 1050 570 390 200 90
MP953D5009 MP953B5003
27...76 kPa 1600 1150 670 350 230 100 40
27...76 kPa 1600 1600 1600 1500 1050 600 320
55...90 kPa
air
pressure
115 kPa
0 kPa
DN15
kvs0.63-2.5
1600 1600 1600 1190 830 460 250
1600 1600 1600 1400 980 550 300
DN15
kvs4
DN20 DN25 DN32 DN40 DN50
EN0B-0064GE51 R0403 2
Loading...
+ 2 hidden pages