Honeywell V200, V2000 Catalog Page
Thermostatic Radiator Valves and Actuators
V200LD V2040D
V2040E
V2040A, V2040E
A
M12933C
B MAX.
V200LD (Straight Body)
PIPE SIZE
A
IN. (MM)
B MAX
IN. (MM)
1
1
1
B MAX DIMENSION IS WITH T100A CONTROL INSTALLED.
1/2 INCH
3/4 INCH
2-5/8 (66)
2-15/16 (74)
4-1/16 (104)
4-1/16 (104)
A
M12932C
C
B MAX.
V2040A (Horizontal Angle Body)
PIPE SIZE
A
IN. (MM)
B MAX
IN. (MM)
1
1
B MAX DIMENSION IS WITH T100A CONTROL INSTALLED.
1/2 INCH
3/4 INCH
1 INCH
2-1/8 (54)
2-1/2 (64)
2-15/16 (74)
4-1/2 (115)
5-3/16 (132)
5-3/16 (132)
C
IN. (MM)
1-1/8 (29)
1-3/16 (31)
1-7/16 (37)
A
M12930D
B MAX.
V2040D (Straight Body)
PIPE SIZE
A
IN. (MM)
B MAX
IN. (MM)
1
1
B MAX DIMENSION IS WITH T100A CONTROL INSTALLED.
1/2 INCH
3/4 INCH
1 INCH
3-3/4 (95)
4-3/16 (106)
4-1/2 (114)
4-1/6 (104)
4-1/6 (104)
4-1/2 (114)
A
M12931D
C
B MAX.
V2040E (Angle Body)
PIPE SIZE
A
IN. (MM)
B MAX
IN. (MM)
1
1
B MAX DIMENSION IS WITH T100A CONTROL INSTALLED.
1/2 INCH
3/4 INCH
1 INCH
2-5/16 (58)
2-5/8 (66)
2-15/16 (74)
3-13/16 (97)
3-13/16 (97)
4-5/16 (110)
C
IN. (MM)
1 (25)
1-1/8 (29)
1-5/16 (34)
V200; V2000 Series Standard Capacity Thermostatic Radiator
Valve Body
One-Pipe Steam Thermostatic Radiator Valves - Allow automatic
temperature control in one-pipe steam or hot water systems for
free standing radiators, convectors and other heating units with
standard capacity requirements. Provide comfort and energy
savings.
• Continually monitors and adjusts room temperature for consistent
comfort and relief from under-heating and overheating.
• Adjustable balancing cartridge design made from resilient material
(EPDM), ensures tight shut-off on steam and hot water systems.
• Nickel plated brass casted body.
• Replaceable cartridge for easy service with service tool.
• Controls include valve body, steam air vent.
• Used with T100 set point and capillary actuators.
• No electrical connection required for non-electric actuators.
• Normally open without control mounted.
Dimensions in inches (millimeters)
Controls
Hydronic
70-6910 237
Thermostatic Radiator Valves and Actuators
M4632
M4640
Typical Installations
M4638
Capacity: Standard
Materials (Body): Nickel Plated Bronze
Differential Pressure Rating:
With T100 or T200: 15 psi (103 kPa)
For low noise: 3 psi (20 kPa)
Pipe Size
Body
Product Number Application
V200LDSL15 For baseboards and
V200LDSL20 3/4 in. DN20 Straight 2.7 Cv 63,800 Btu/hr 3/4 in. Sweat both
V2040ASL15 Replaces most manual
V2040ASL20 3/4 in. DN20 Horizontal
V2040ASL25 1 in. DN25 Horizontal
V2040DSL15 Especially suited for
V2040DSL20 3/4 in. DN20 Straight 2.7 Cv 63,800 Btu/hr 3/4 in. Threaded —
V2040DSL25 1 in. DN25 Straight 2.7 Cv 70,500 Btu/hr 1 in. Threaded —
V2040ESL15 Use where installation
V2040ESL20 3/4 in. DN20 Angle 2.7 Cv 63,800 Btu/hr 3/4 in. NPT T100BT100CT100F
V2040ESL25 1 in. DN25 Angle 2.7 Cv 70,500 Btu/hr 1 in. Threaded T100BT100CT100F
V2043DSL15 For baseboards and
V2043DSL20 Especially suited for
other installations with
copper tubing.
valves with minimum
piping changes.
base boards and straight
runs where manual
valves were not originally
installed.
space is limited
other installations with
copper tubing.
base boards and straight
runs where manual
valves were not originally
installed.
1/2 in. DN15 Straight 2.5 Cv 59,100 Btu/hr 1/2 in. Sweat both
1/2 in. DN15 Horizontal
1/2 in. DN15 Straight 2.5 Cv 59,100 Btu/hr 1/2 in. Threaded —
1/2 in. DN15 Angle 2.5 Cv 59,100 Btu/hr 1/2 in. NPT T100BT100CT100F
1/2 in. DN15 Straight 2.5 Cv 59,100 Btu/hr 1/2 in. Sweat both
3/4 in. DN20 Straight 2.7 Cv 63,800 Btu/hr 3/4 in. Sweat —
Pattern
Angle
Angle
Angle
Pressure Ratings (Hot Water): 150 psi maximum (1034 kPa)
Pressure Ratings (Steam): 15 psi maximum (103 kPa)
Temperature Rating: 248 F Maximum (120 C)
Cartridge Change Tool: Yes - Use VA8200A001
Inlet Connection Type: NPT
Actuator Connection: M30 x 1.5
Capacity
(Btu/hrsteam)
2.5 Cv 59,100 Btu/hr 1/2 in. Threaded T100A, M and V controls
2.7 Cv 63,800 Btu/hr 3/4 in. Threaded T100A, M and V controls
2.7 Cv 70,500 Btu/hr 1 in. Threaded T100A, M and V controls
Inlet
Connection
Size (inch)
Connection
Typ e Us ed W ithinch DN (Cv)
ends, no union
ends, no union
ends, no union
T100
T100
to conform to horizontal
mounting requirements
to conform to horizontal
mounting requirements
to conform to horizontal
mounting requirements
T100
M3190
238 customer.honeywell.com 70-6910
Loading...