Honeywell TS130 PRODUCT DATA

TS130

Temperature Relief Valve

WITH TEST FACILITY AND DOUBLE SENSOR

PRODUCT DATA

Application

The TS130 Temperature Relief Valve for heating systems to
DIN 4751, Sheet 2 is a self-acting valve which is activated by
the flow temperature of the heat generator. It opens and dis­charges water from the heat generator or condensing coil at a
flow temperature of 95°C (203°F) and thereby prevents a
significant temperature rise in the heat generator.

Features

• Construction tested to DIN 3440

• Immersion pocket with double heat sensors

• With test facility

• Capillary tube protected against kinking by steel

sheath

• Immersion pocket with external thread

Design

The Temperature Relief Valve comprises:

•

Housing with internal thread

•

Bonnet

•

Valve piston with seal disc

•

Spring

•

Immersion pocket

•

Remote double temperature sensor with capillary tube

•

Immersion sensor G 1/2” (ISO 228)

Materials

•

Brass housing, bonnet and immersion pocket

•

Copper temperature sensor

•

Copper capillary tube

•

Brass valve piston

•

Hot-water-resistant elastomer seals

Range of Applicati on

Multi-fuel boilers with integral water heating or condensing
coils in closed solid-fuel fired heating systems to DIN 4751,
Sheet 2.

Specifications

Heating system capacity
Operating temperature
Flow capacity

Connection size

max. 93 kW (80 000 kcal/h)
95°C (203°F)
2000 kg /h water at a minimum

flow pressure of 1,0 bar
(14,5 P.S.I.)

Rp 3/4" (DIN 2999)

Copyright © 2001 Honeywell AG • All rights reserved EN0H-179GE25 R0301

TS130

Temperature sensor

Bellows system

Function

The temperature relief valve is actuated by the flow tem­perature of the heat generator. It comprises a spring-loaded
valve and a bellows operated temperature sensor. When a
boiler flow temperature of 95ºC is reached the force exerted
by the bellows system becomes greater than the force of the
spring and the valve opens. Heated potable water then flows
out and this is replaced by cold water from the supply net­work. This absorbs excess heat from the heat generator and
prevents overheating.

Versions

TS130 - 3/4 A = Opening temperature 95°C (203°F),

capillary tube with protection sheath 1300 m,
with approved construction

TS130 - 3/4 B = Opening temperature 95°C (203°F),

capillary tube with protection sheath 4000 m

TS130 - 3/4 Z = Special versions on request

Accessories

Complete piston gui de for TS130

TS130 KF-3/4 A

Home and Buil ding Control

Honeywell AG Phone: [phone]
Zu den Ruhrwiesen 3 Fax: [phone]
D-59755 Arnsberg-Neheim [e-mail] http://europe.hbc.honeywell.com

EN0H-179GE25 R0301 2 Subject to change • All rights reserved