Direct Coupled Damper Actuator—Spring Return
S10 Series: MS4110; MS7510; MS8110
Spring Return Direct Coupled Actuator, 88 lb-in
MS4110, MS7510, and MS8110 Spring Return Direct Coupled
Actuators (DCA) are used within heating, ventilating, and airconditioning (HVAC) systems. They can drive a variety of quarterturn, final control elements requiring spring return fail-safe
operation.
• Brushless DC submotor with electronic stall protection for floating/
modulating models.
• Brush DC submotor with electronic stall protection for 2-position
models.
• Self-centering shaft adapter (shaft coupling) for wide range of shaft
sizes.
• Models available for use with two-position, single pole single throw
(spst), line- (Series 40) or low- (Series 80) voltage controls.
• Models available for use with floating or switched single-pole,
double-throw (spdt) (Series 60) controls.
• Models available for use with proportional current or voltage (Series
70) controls.
• Models available with combined floating/modulating control in a
single device.
• Models available with adjustable zero and span.
• Models available with line-voltage internal end switches.
• Models available with three-foot, 18 AWG color-coded cable.
• Access cover to facilitate connectivity.
• Metal housing with built-in mechanical end limits.
• Spring return direction field-selectable.
• Shaft position indicator and scale.
• Manual winding capability with locking function.
• UL (cUL) listed and CE compliant.
• All Models are plenum-rated per UL873.
Actuator Type: Damper; Valve
Rotational Stroke: 95 ±3 degrees
Fail Safe Mode: Spring Return
Torque Rating: 88 lb-in. (10 Nm)
Spring Return Torque: 88 lb-in. (10 Nm)
Spring Return Direction: By orientation
Dimensions, Approximate: 9.72 in high x 3.94 in wide x 2.95 in deep
(247 mm high x 100 mm wide x 75 mm deep)
External Auxiliary Switches Available: Ye s , S W 2- US
Environmental Rating: NEMA2
Frequency: ;50 Hz; 60 Hz
Manual operation: Manual crank
Mounting: Direct Coupled
Maximum Noise Rating, Holding (dBA @ 1m): 20 (no aud ble noise)
Maximum Noise Rating, Driving (dBA @ 1m): 40
Rotational Stroke Adjustment: Mechanically limited 5 degree
increments
Compatible Damper Shafts: 3/8 to 1.06 in. round or 3/8 to 11/16 in.
square (10 to 27 mm round or 10 to 18 mm square)
Shaft Adapter Type: Self-centering clamping
Materials: Aluminum housing, Plenum rated plastic access cover
Operating Humidity Range (% RH): 5 to 95% RH, non-condensing
Ambient Temperature Range: -40 F to +140 F (-40 C to +60 C)
Storage Temperature Range: -40 F to +158 F (-40 C to +70 C)
Weight: 7.4 lb (3.36 kg)
Includes: Mounting bracket, self-centering shaft adapter, 3mm crank
Comments: Integral 1/2 in. NPSM conduit connection
Approvals
CE: 89/336/ECC, 73/23/EEC
C-Tick: N314
Underwriters Laboratories, Inc: UL873, Plenum Rated
Canadian Underwriters Laboratories, Inc: cUL C22.2 No. 24-93
Commercial
Components
70-6910 381
Direct Coupled Damper Actuator—Spring Return
Product Number
MS4110A1002/U
MS4110A1200/U
MS7510A2008/U
MS7510A2206/U
MS7510H2209/U
MS7510W2008/U
MS7510W2206/U
MS8110A1008/U
MS8110A1206/U
MS8110W1008/U
MS8110W1206/U
Timing (seconds)
Control
Signal Feedback
Tw o
— 45 sec 20 sec — 45 VA 13 VA 100 to
position
; SPST
— 45 sec 20 sec 250 Vac,
(0)2-10
2-10 Vdc
Vdc (4-
(max.
20 mA
output:
w/500
±1.0 mA)
ohm
2-10 Vdc
resistor)
(max.
; On/
output:
Off;
±1.0 mA)
SPDT;
Floating
2-10 Vdc
(max.
output:
±1.0 mA)
(0)2-10
2-10 Vdc
Vdc (4-
(max.
20 mA
output:
w/500
±1.0 mA)
ohm
2-10 Vdc
resistor)
(max.
;
output:
Floating
±1.0 mA)
Tw o
— 45 sec 20 sec — 30 VA 8 VA 24 Vac/dc— — Enclosed
position
; SPST
— 45 sec 20 sec 250 Vac,
— 45 sec 20 sec — 30 VA 8 VA 24 Vac/dc— Threaded
— 45 sec 20 sec 250 Vac,
Nominal
Driving
@ 60 Hz
90 sec 20 sec — 14 VA 5 VA 24 Vac/dcMin.
90 sec 20 sec 250 Vac,
90 sec 20 sec 250 Vac,
90 sec 20 sec — 14 VA 5 VA 24 Vac/dcMin.
90 sec 20 sec 250 Vac,
Maximum
Spring
Return
(sec) Driving Holding (inch) (m)
Switch
Ratings
5 A res
5 A res
5 A res
5 A res
5 A res
5 A res
Power
Consumption
Supply
Vol ta g e
250 Vac
45 VA 13 VA 100 to
14 VA 5 VA 24 Vac/dcMin.
14 VA 5 VA 24 Vac/dcMin.
14 VA 5 VA 24 Vac/dcMin.
30 VA 8 VA 24 Vac/dc—— ——2
30 VA 8 VA 24 Vac/dc— Threaded
250 Vac
Input
Impedance
— — Enclosed
—— ——2
95
kOhm
95
kOhm
95
kOhm
95
kOhm
95
kOhm
Electrical
Connection
Length
Cable
Entry
—Enclosed
———2
———2
Threaded
conduit
connecto
r
Threaded
conduit
connecto
r
conduit
connecto
r
conduit
connecto
r
Electrical
Connections
screw
terminal strip
(22 to 14
AWG)
screw
terminal strip
(22 to 14
AWG)
18 AWG
color-coded
cable
screw
terminal strip
(22 to 14
AWG)
18 AWG
color-coded
cable
——0
——0
36 in. 0.9 m 0
36 in. 0.9 m 2
——0
36 in. 0.9 m 0
36 in. 0.9 m 2
Number
of
Internal
Auxiliary
Switch
382 customer.honeywell.com 70-6910