Honeywell MP909E, MP909H Catalog Page
Pneumatic Damper Actuators
MP909E,H Pneumatic Damper Actuators
These actuators are used for proportional control of variable volume terminal units, mixing boxes, and small to medium sized dampers. They are available in various operating ranges for either independent operation or sequence operation with other actuators. The MP909E has an optional adjustable stroke feature. The MP909H includes a positive positioner. Replacement devices are available for Johnson, Powers, Robertshaw, Barber-Colman, and older Honeywell actuator models.
• Rolling diaphragm operated.
• Low friction shaft bearing.
• Close tolerance on operating range and stroke.
• Non-overlapping spring ranges for sequencing.
• Corrosion resistant materials.
• Reliable long life.
Dimensions in inches (millimeters)
Actuator with Fixed External Mounting Bracket
|
MP909H |
4-1/2 |
6-1/4 |
(114) |
(159) |
5 (127)
9-1/4 (235) MP909E 
13-3/4 (350) MP909H 
1 ANGLE BRACKET IS 14002851-001 FOR MP909E1067 AND IS 14002850-001
FOR OTHERS. |
M27095 |
|
Actuator with Internal N.C. Trunnion Mounting Bracket |
||
|
|
MP909H |
|
|
N.C. |
|
|
9-1/2 |
|
MP909E |
(240) |
|
|
|
|
N.C. |
|
|
7 (180) |
|
|
6-7/8 (175) WIDE |
|
17 (430) MP909E |
|
|
|
19-3/4 (500) MP909H |
|
EDGE OF |
|
|
DAMPER |
|
M27097 |
Actuator with External Trunnion Mounting Bracket
7-1/4
(185)
17 (430) MP909E 
22 (560) MP909H
M27096
Actuator with Internal N.O. Trunnion Mounting Bracket
|
9 (230) |
|
MP909H |
|
6-1/2 |
|
(169) |
|
MP909E |
|
6-7/8 (175) WIDE |
17 (430) MP909E |
|
|
19-3/4 (500) MP909H |
EDGE OF |
|
DAMPER |
M27098 |
|
Actuator Type: Damper
Actuator Force: Medium
Fail Safe Mode: Spring Return
Air Connections: Dual Barbed fitting for 5/32 in. or 1/4 in. O.D. tubing
Diaphragm Effective Area: 6.6 sq in. (43 sq cm)
Temperature Range: -28 F to +160 F (-33 C to +71 C)
Humidity Range: 5 to 95% RH
Approvals:
Underwriters Laboratories, Inc: Components Recognized: Report R18118
Accessories:
27518-Crankarm balljoint with 1/4 - 28 UNF male threads, fits 5-16 inch diameter push rods
26025B-Damper crank arm for 3/8 in. (9.5 mm) diameter axle. Elongated slot for linkage connection. Slot scaled for 40-50-60-75-90 degrees.
27520C-Push Rod (5/16 in. dia., 12 in. length) 27520G-Push Rod (5/16 in. dia., 24 in. length) 27520K-Push Rod (5/16 in. dia., 36 in. length) 27520L-Push Rod (5/16 in. dia., 48 in. length)
312867C-Damper Crank Arm for 1/2 in. (12.7mm) diameter axle. Elongated slot for linkage connection. Slot scaled for 45-60-75-90 degrees
312867H-Externally mounted Linkage Kit
314440A-MP909 - Clevis, Clevis Pin and Cotter Pin Assembly 315321-Crankarm Balljoint (with 1/4 in male threads), fits 5/16 in.
diameter pushrod
315781-Motor shaft balljoint with 3/8 - 16 UNC female threads, fits 5/16 inch diameter pushrods.
14002850-001-Angle Bracket 5 3/8 in, 137 mm, long, 5 in, 127 mm, wide
14003640-001-Angle Bracket 3 in. (76 mm) long, 3 3/4 in. (95 mm) wide, 2 3/4 in. (70 mm) high
14004062-001-External Trunnion Mounting Bracket
14004062-002-Internal N.C. Trunnion Mounting Bracket
14004062-003-Internal N.O. Trunnion Mounting Bracket 14004106-001-Actuator pushrod for conversion of internal N.C. to
external
14004107-001-Crankarm Assembly for conversion from internal N.C. to external Trunnion mounting
14004210-001-Feedback Spring Kit includes orange spring (3 psi [21kPa]), yellow spring (5 psi [34 kPa]), and blue spring (10 psi [69 kPa]).
14004236-001-Coupler, actuator shaft to 5/16 in, 8 mm, pushrod 14004241-002-Hitch Pin (Six Sets)
14004242-001-MP918 Top Mount Operator Assembly 14004667-001-Offset Crank arm assembly with 2 screws (304725-062),
nuts (14004102-001), crank arm (14004655-001) for 1/2 in. Drive Axle
Replacement Parts:
14004137-001-Retrofit Kit for adding positive positioner to MP909E or repair of MP909H
698 |
customer.honeywell.com |
70-6910 |
Pneumatic Damper Actuators
|
|
|
|
|
|
|
|
|
|
|
|
Maximum |
|
|
|
|
|
||
|
|
Operating |
|
|
|
|
|
||
|
|
Pressure |
|
Spring Range |
Stroke |
|
|
||
|
|
|
|
|
|
|
|
|
|
Product Number |
Air Connections |
(psi) |
|
(kPa) |
(psi) |
(kPa) |
(inch) |
(mm) |
Includes |
|
|
|
|
|
|
|
|
|
|
MP909E1018/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
3 psi to 13 |
21 kPa to |
4 in. |
102 mm |
315781 Balljoint, Linkage Kit 14002061- |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
006 and 14002850-001 Fixed External |
|
|
|
|
|
|
|
|
|
Mounting Bracket with Balljoint |
|
|
|
|
|
|
|
|
|
|
MP909E1034/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
4 in. |
102 mm |
315781 Balljoint, Linkage Kit 14002061- |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
006 and 14002850-001 Fixed External |
|
|
|
|
|
|
|
|
|
Mounting Bracket with Balljoint |
|
|
|
|
|
|
|
|
|
|
MP909E1059/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
2 3/4 in. |
70 mm |
Actuator only. 3/8 in.-16 Threaded Shaft |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
with stroke stops. No Mounting Bracket |
|
|
|
|
|
|
|
|
|
|
MP909E1067/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
3 in. |
79 mm |
Fixed external unitary mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
and clevis shaft with stroke stops |
|
|
|
|
|
|
|
|
|
|
MP909E1083/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
2.5 psi to |
17 kPa to |
3 in. |
79 mm |
315781 Balljoint, Linkage Kit 14002061- |
|
in. or 1/4 in. O.D. tubing |
|
|
|
6.5 psi |
45 kPa |
|
|
006 and 14002850-001 Fixed External |
|
|
|
|
|
|
|
|
|
Mounting Bracket with Balljoint |
|
|
|
|
|
|
|
|
|
|
MP909E1109/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
2.5 psi to |
17 kPa to |
2 3/4 in. |
70 mm |
Actuator only. 3/8 in.-16 Threaded Shaft |
|
in. or 1/4 in. O.D. tubing |
|
|
|
6.5 psi |
45 kPa |
|
|
with stroke stops. No Mounting Bracket |
|
|
|
|
|
|
|
|
|
|
MP909E1158/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
9 psi to 13 |
62 kPa to |
3 in. |
79 mm |
Actuator only. 3/8 in.-16 Threaded Shaft. |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
No Mounting Bracket |
|
|
|
|
|
|
|
|
|
|
MP909E1174/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
9 psi to 13 |
62 kPa to |
3 in. |
70 mm |
14002850-001 - Fixed External Mounting |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
Bracket with 315781 Balljoint |
|
|
|
|
|
|
|
|
|
|
MP909E1240/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
3 in. |
79 mm |
Actuator only. 3/8 in.-16 Threaded Shaft. |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
No Mounting Bracket |
|
|
|
|
|
|
|
|
|
|
MP909E1349/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
3 psi to 13 |
21 kPa to |
4 in. |
102 mm |
Internal N.C. trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1356/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
3 psi to 13 |
21 kPa to |
4 in. |
102 mm |
External trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1364/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
4 in. |
102 mm |
External trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1372/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
2.5 psi to |
17 kPa to |
3 in. |
70 mm |
External trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
6.5 psi |
45 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1380/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
9 psi to 13 |
62 kPa to |
3 in. |
79 mm |
External trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1398/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
9 psi to 13 |
62 kPa to |
3 in. |
79 mm |
Internal N.C. trunnion mounting bracket |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
90 kPa |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909E1422/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
4 in. |
102 mm |
14004062-003 Internal N.O. Mounting |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
Bracket with crankarm and pushrod |
|
|
|
|
|
|
|
|
|
assembly |
|
|
|
|
|
|
|
|
|
|
MP909E1463/U |
Dual Barbed fitting for 5/32 |
29 psi |
|
200 kPa |
5 psi to 10 |
34 kPa to |
4 in. |
102 mm |
14002850-001 - Fixed External Mounting |
|
in. or 1/4 in. O.D. tubing |
|
|
|
psi |
69 kPa |
|
|
Bracket |
|
|
|
|
|
|
|
|
|
|
MP909H1331/U |
Positioner: Pilot 5/32 in. |
25 psi |
|
172 kPa |
Positive |
Positive |
4 in. |
102 mm |
315781 Balljoint, Positive Positioner, and |
|
barb, Main 1/4 in. barb, |
|
|
|
positioner |
positioner |
|
|
14002850-001 - Fixed External Mounting |
|
Branch 1/4 in. barb. |
|
|
|
10 psi |
69 kPa |
|
|
Bracket with Balljoint |
|
Actuator: combination 5/32 |
|
|
|
span (5 |
span (34 |
|
|
|
|
in. and 1/4 in. barb |
|
|
|
psi spring |
kPa spring |
|
|
|
|
|
|
|
|
included) |
included) |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909H1368/U |
Positioner: Pilot 5/32 in. |
25 psi |
|
172 kPa |
Positive |
Positive |
4 in. |
102 mm |
External Trunnion Bracket, Positive |
|
barb, Main 1/4 in. barb, |
|
|
|
positioner |
positioner |
|
|
Positioner |
|
Branch 1/4 in. barb. |
|
|
|
10 psi |
69 kPa |
|
|
|
|
Actuator: combination 5/32 |
|
|
|
span (5 |
span (34 |
|
|
|
|
in. and 1/4 in. barb |
|
|
|
psi spring |
kPa spring |
|
|
|
|
|
|
|
|
included) |
included) |
|
|
|
|
|
|
|
|
|
|
|
|
|
MP909H1392/U |
Positioner: Pilot 5/32 in. |
25 psi |
|
172 kPa |
Positive |
Positive |
4 in. |
102 mm |
Mounting bracket for internal N.C. |
|
barb, Main 1/4 in. barb, |
|
|
|
positioner |
positioner |
|
|
Trunnion mounting, positive positioner |
|
Branch 1/4 in. barb. |
|
|
|
10 psi |
69 kPa |
|
|
|
|
Actuator: combination 5/32 |
|
|
|
span (5 |
span (34 |
|
|
|
|
in. and 1/4 in. barb |
|
|
|
psi spring |
kPa spring |
|
|
|
|
|
|
|
|
included) |
included) |
|
|
|
|
|
|
|
|
|
|
|
|
|
<![endif]>Pneumatic
<![if ! IE]><![endif]>Controls
70-6910 |
|
|
|
699 |
|
|
Loading...