Honeywell MP909E, MP909H Catalog Page
Pneumatic Damper Actuators
13-3/4 (350) MP909H
5 (127)
9-1/4 (235) MP909E
4-1/2
(114)
MP909H
6-1/4
(159)
M27095
1
ANGLE BRACKET IS 14002851-001 FOR MP909E1067 AND IS 14002850-001
FOR OTHERS.
17 (430) MP909E
19-3/4 (500) MP909H
MP909E
N.C.
7 (180)
MP909H
N.C.
9-1/2
(240)
EDGE OF
DAMPER
6-7/8 (175) WIDE
M27097
7-1/4
(185)
M27096
17 (430) MP909E
22 (560) MP909H
17 (430) MP909E
19-3/4 (500) MP909H
6-1/2
(169)
MP909E
9 (230)
MP909H
EDGE OF
DAMPER
6-7/8 (175) WIDE
M27098
MP909E,H Pneumatic Damper Actuators
Dimensions in inches (millimeters)
Actuator with Fixed External Mounting Bracket
Actuator with Internal N.C. Trunnion Mounting Bracket
Actuator with External Trunnion Mounting Bracket
Actuator with Internal N.O. Trunnion Mounting Bracket
698 customer.honeywell.com 70-6910
These actuators are used for proportional control of variable
volume terminal units, mixing boxes, and small to medium sized
dampers. They are available in various operating ranges for either
independent operation or sequence operation with other actuators.
The MP909E has an optional adjustable stroke feature. The
MP909H includes a positive positioner. Replacement devices are
available for Johnson, Powers, Robertshaw, Barber-Colman, and
older Honeywell actuator models.
• Rolling diaphragm operated.
• Low friction shaft bearing.
• Close tolerance on operating range and stroke.
• Non-overlapping spring ranges for sequencing.
• Corrosion resistant materials.
• Reliable long life.
Actuator Type: Damper
Actuator Force: Medium
Fail Safe Mode: Spring Return
Air Connections: Dual Barbed fitting for 5/32 in. or 1/4 in. O.D. tubing
Diaphragm Effective Area: 6.6 sq in. (43 sq cm)
Temperature Range: -28 F to +160 F (-33 C to +71 C)
Humidity Range: 5 to 95% RH
Approvals:
Underwriters Laboratories, Inc: Components Recognized: Report
R18118
Accessories:
27518-Crankarm balljoint with 1/4 - 28 UNF male threads, fits 5-16 inch
diameter push rods
26025B-Damper crank arm for 3/8 in. (9.5 mm) diameter axle.
Elongated slot for linkage connection. Slot scaled for 40-50-60-75-90
degrees.
27520C-Push Rod (5/16 in. dia., 12 in. length)
27520G-Push Rod (5/16 in. dia., 24 in. length)
27520K-Push Rod (5/16 in. dia., 36 in. length)
27520L-Push Rod (5/16 in. dia., 48 in. length)
312867C-Damper Crank Arm for 1/2 in. (12.7mm) diameter axle.
Elongated slot for linkage connection. Slot scaled for 45-60-75-90
degrees
312867H-Externally mounted Linkage Kit
314440A-MP909 - Clevis, Clevis Pin and Cotter Pin Assembly
315321-Crankarm Balljoint (with 1/4 in male threads), fits 5/16 in.
diameter pushrod
315781-Motor shaft balljoint with 3/8 - 16 UNC female threads, fits 5/16
inch diameter pushrods.
14002850-001-Angle Bracket 5 3/8 in, 137 mm, long, 5 in, 127 mm,
wide
14003640-001-Angle Bracket 3 in. (76 mm) long, 3 3/4 in. (95 mm) wide,
2 3/4 in. (70 mm) high
14004062-001-External Trunnion Mounting Bracket
14004062-002-Internal N.C. Trunnion Mounting Bracket
14004062-003-Internal N.O. Trunnion Mounting Bracket
14004106-001-Actuator pushrod for conversion of internal N.C. to
external
14004107-001-Crankarm Assembly for conversion from internal N.C. to
external Trunnion mounting
14004210-001-Feedback Spring Kit includes orange spring (3 psi
[21kPa]), yellow spring (5 psi [34 kPa]), and blue spring (10 psi [69
kPa]).
14004236-001-Coupler, actuator shaft to 5/16 in, 8 mm, pushrod
14004241-002-Hitch Pin (Six Sets)
14004242-001-MP918 Top Mount Operator Assembly
14004667-001-Offset Crank arm assembly with 2 screws (304725-062),
nuts (14004102-001), crank arm (14004655-001) for 1/2 in. Drive Axle
Replacement Parts:
14004137-001-Retrofit Kit for adding positive positioner to MP909E or
repair of MP909H
Pneumatic Damper Actuators
Product Number Air Connections
MP909E1018/U Dual Barbed fitting for 5/32
MP909E1034/U Dual Barbed fitting for 5/32
MP909E1059/U Dual Barbed fitting for 5/32
MP909E1067/U Dual Barbed fitting for 5/32
MP909E1083/U Dual Barbed fitting for 5/32
MP909E1109/U Dual Barbed fitting for 5/32
MP909E1158/U Dual Barbed fitting for 5/32
MP909E1174/U Dual Barbed fitting for 5/32
MP909E1240/U Dual Barbed fitting for 5/32
MP909E1349/U Dual Barbed fitting for 5/32
MP909E1356/U Dual Barbed fitting for 5/32
MP909E1364/U Dual Barbed fitting for 5/32
MP909E1372/U Dual Barbed fitting for 5/32
MP909E1380/U Dual Barbed fitting for 5/32
MP909E1398/U Dual Barbed fitting for 5/32
MP909E1422/U Dual Barbed fitting for 5/32
MP909E1463/U Dual Barbed fitting for 5/32
MP909H1331/U Positioner: Pilot 5/32 in.
MP909H1368/U Positioner: Pilot 5/32 in.
MP909H1392/U Positioner: Pilot 5/32 in.
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
in. or 1/4 in. O.D. tubing
barb, Main 1/4 in. barb,
Branch 1/4 in. barb.
Actuator: combination 5/32
in. and 1/4 in. barb
barb, Main 1/4 in. barb,
Branch 1/4 in. barb.
Actuator: combination 5/32
in. and 1/4 in. barb
barb, Main 1/4 in. barb,
Branch 1/4 in. barb.
Actuator: combination 5/32
in. and 1/4 in. barb
Maximum
Operating
Pressure Spring Range Stroke
29 psi 200 kPa 3 psi to 13
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 2.5 psi to
29 psi 200 kPa 2.5 psi to
29 psi 200 kPa 9 psi to 13
29 psi 200 kPa 9 psi to 13
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 3 psi to 13
29 psi 200 kPa 3 psi to 13
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 2.5 psi to
29 psi 200 kPa 9 psi to 13
29 psi 200 kPa 9 psi to 13
29 psi 200 kPa 5 psi to 10
29 psi 200 kPa 5 psi to 10
25 psi 172 kPa Positive
25 psi 172 kPa Positive
25 psi 172 kPa Positive
psi
psi
psi
psi
6.5 psi
6.5 psi
psi
psi
psi
psi
psi
psi
6.5 psi
psi
psi
psi
psi
positioner
10 psi
span (5
psi spring
included)
positioner
10 psi
span (5
psi spring
included)
positioner
10 psi
span (5
psi spring
included)
21 kPa to
90 kPa
34 kPa to
69 kPa
34 kPa to
69 kPa
34 kPa to
69 kPa
17 kPa to
45 kPa
17 kPa to
45 kPa
62 kPa to
90 kPa
62 kPa to
90 kPa
34 kPa to
69 kPa
21 kPa to
90 kPa
21 kPa to
90 kPa
34 kPa to
69 kPa
17 kPa to
45 kPa
62 kPa to
90 kPa
62 kPa to
90 kPa
34 kPa to
69 kPa
34 kPa to
69 kPa
Positive
positioner
69 kPa
span (34
kPa spring
included)
Positive
positioner
69 kPa
span (34
kPa spring
included)
Positive
positioner
69 kPa
span (34
kPa spring
included)
4 in. 102 mm 315781 Balljoint, Linkage Kit 14002061-
4 in. 102 mm 315781 Balljoint, Linkage Kit 14002061-
2 3/4 in. 70 mm Actuator only. 3/8 in.-16 Threaded Shaft
3 in. 79 mm Fixed external unitary mounting bracket
3 in. 79 mm 315781 Balljoint, Linkage Kit 14002061-
2 3/4 in. 70 mm Actuator only. 3/8 in.-16 Threaded Shaft
3 in. 79 mm Actuator only. 3/8 in.-16 Threaded Shaft.
3 in. 70 mm 14002850-001 - Fixed External Mounting
3 in. 79 mm Actuator only. 3/8 in.-16 Threaded Shaft.
4 in. 102 mm Internal N.C. trunnion mounting bracket
4 in. 102 mm External trunnion mounting bracket
4 in. 102 mm External trunnion mounting bracket
3 in. 70 mm External trunnion mounting bracket
3 in. 79 mm External trunnion mounting bracket
3 in. 79 mm Internal N.C. trunnion mounting bracket
4 in. 102 mm 14004062-003 Internal N.O. Mounting
4 in. 102 mm 14002850-001 - Fixed External Mounting
4 in. 102 mm 315781 Balljoint, Positive Positioner, and
4 in. 102 mm External Trunnion Bracket, Positive
4 in. 102 mm Mounting bracket for internal N.C.
Includes(psi) (kPa) (psi) (kPa) (inch) (mm)
006 and 14002850-001 Fixed External
Mounting Bracket with Balljoint
006 and 14002850-001 Fixed External
Mounting Bracket with Balljoint
with stroke stops. No Mounting Bracket
and clevis shaft with stroke stops
006 and 14002850-001 Fixed External
Mounting Bracket with Balljoint
with stroke stops. No Mounting Bracket
No Mounting Bracket
Bracket with 315781 Balljoint
No Mounting Bracket
Bracket with crankarm and pushrod
assembly
Bracket
14002850-001 - Fixed External Mounting
Bracket with Balljoint
Positioner
Trunnion mounting, positive positioner
Pneumatic
Controls
70-6910 699
Loading...