Honeywell MLPN5600A Users Manual

SP5600 Terminal

User's Guide

Version 1.00

Table of Contents

Table of Contents .................................................................................................................................ii

1. Preface..........................................................................................................................................1

2. General Features and Characteristics...........................................................................................2

2.1 Electrical

2.2 Environmental..............................................................................................................2

2.3 Physical

2.4 CPU..............................................................................................................................2

2.5 Memory

2.6 Reader

2.7 Display.........................................................................................................................3

2.8 Keypad

2.9 Indicator

2.10 Communication

2.11 802.11b/g WLAN Specification...................................................................................3

2.12 Software

3. Software Architecture ..................................................................................................................4

3.1 Kernel & Application Manager

3.2 System

3.3 Application.................................................................................................................10

3.4 Programming the terminal

3.5 Programming the communication cradle

4. Operations..................................................................................................................................11

4.1 Keypad operations

4.2 Application mode.......................................................................................................11

4.3 System mode

4.4 Kernel mode

4.5 Application Manager

......................................................................................................................2

........................................................................................................................2

..........................................................................................................................2

.........................................................................................................................3

.......................................................................................................................3

............................................................................................................3

.......................................................................................................................3

....................................................................................4

..........................................................................................................................5

.........................................................................................10

...................................................................10

......................................................................................................11

..............................................................................................................12

...............................................................................................................12

..................................................................................................12

低功率電波輻射性電機管理辦法

第十二條經型式認證合格之低功率射頻電機，非經許可，公司、商號或使用者不得擅自

變更頻率、加大功率或變更原設計之特性及功能。

第十四條低功率射頻電機之使用不得影響飛航安全及干擾合法通信；經發現有干擾現象

時，應立即停用，並改善至吳干擾時方得繼續使用。前項合法通信，指依電信法規定作業之無線電通信。

低功率射頻電機需忍受合法通信或工業、科學及醫療用電波輻射性電機設備之

干擾。

1. Preface

The SP5600 terminal is rugged, versatile, high performance data terminals designed for all-day, everyday use. It is powered by a Li-ion rechargeable battery with working time longer than 16 hours. It is supported by a rich set of development tools, including a Windows-based application generator, “C” and “Basic” compilers. With its integrated Laser/CCD barcode scanning unit and 802.11b/g WLAN module, the SP5600 terminal is ideal for real time applications such as inventory control, shop floor management, warehousing and distribution operations.

CAUTION :

RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. DISPOSE OF USED BATTERIES ACCORDING T O THE INSTRUCT

Battery disposal For green-environment issue it's important that batteries should be recycled in a proper way.

FCC Regulations:

zThis device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

zThis device has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiated radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However , there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmf ul interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

-Reorient or relocate the receiving antenna.

-Increase the separation between the equipment and receiver.

-Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

-Consult the dealer or an experienced radio/TV technician for help.

Changes or modifications not expressly approved by the party responsible for compliance could void the user‘s authority to operate the equipment.

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

It only operated in hand-held used. If you only transfer data to Host by WLAN, please keep the minimum distance 20cm between machine & your body.

2. General Features and Characteristics

Basic characteristics of the SP5600 Terminal are listed below,

2.1 Electrical

y Operation battery: 3.7V Li-ion rechargeable battery, 1800mAH y Backup battery: 3.0V, 7mAH rechargeable Lithium battery for SRAM & calendar y Working time: 16 hours

2.2 Environmental

y Operating Humidity: non-condensed 10% to 90% y Storage Humidity: non-condensed 5% to 95% y Operating Temperature: 0 to 50 °C y Storage Temperature: -20 to 70 °C y EMC regulation: FCC, CE and C-tick y Shock resistance: 1.2m drop onto concrete y IP rating: IP65

2.3 Physical

y Dimensions:170mm (L) x 80mm (W) x 44mm (H) y Weight: 250g (including battery) y Color: Black y Material: ABS

2.4 CPU

y Toshiba 16-bit CMOS type CPU y Tunable clock, up to 22MHz

2.5 Memory

Program memory

y 1 M Bytes flash memory is used to store the program code, font, constant data, and so on.

Data memory

y 256K Bytes SRAM

2.6 Reader

The T erminal can be equipped with either L aser or Long Range CCD scanner . Detailed specifications are as follows:

SP5600 (Laser)

y Light source: visible Laser diode operating at 670±15nm y Scan rate: 36±3 scans per second y Scan angle: 42°nominal

y Minimum print contrast: 20% absolute dark/light reflectance at 670nm y Depth of field: 5 ~ 95 cm, depends on barcode resolution

SP5600 (CCD)

y Resolution: 0.125mm ~ 1.00mm y Depth of field: 2 ~ 20cm y Width of field: 45mm ~ 124mm y Scan rate: 100 scans/sec y Ambient Light Rejection:

1200 lux (Direct Sun-light) 2500 lux (Fluorescent Light)

2.7 Display

y 100x64 graphic dots FSTN LCD display with LED back-light

2.8 Keypad

y 24 numeric rubber keys.

2.9 Indicator

Buzzer

y Software programmable audio indicator, 1KHz to 4KHz, low power transducer type.

LED

y Programmable, dual-color (green and red) LED for status indication.

2.10 Communication

y RS-232: Baud rate up to 115200bps y Serial IR: Baud rate up to 115200bps y Standard IrDA: Standard 1.0 compatible. Baud rate up to 115200bps

2.11 802.11b/g WLAN Specification

SP5600 Terminal

y Frequency Range: 2.4 ~ 2.4835 GHz, unlicensed ISM Band y Modulation: DSSS with DBPSK, DQPSK, and CCK

OFDM with BPSK, QPSK, QAM, and 64QAM

y Data Rate: 11 / 54 Mbps Auto-fallback y Channels: Standard y Coverage: 100M line-of-sight y Maximum Output Power: 49mW / 22 mW y Compliance: IEEE 802.11b/g & Wi-Fi compliance

Access Point

y Works with commercially available standard IEEE 802.11b/g Access Point

2.12 Software

y Operating System: CipherLab proprietary OS y Programming Tools: “C” compiler, BASIC compiler and a Windows-based Application

Generator

+ 9 hidden pages