Honeywell HSF1640 Series Manual

IMPORTANT

SAFETY INSTRUCTIONS

READ AND SAVE THESE
SAFETY INSTRUCTIONS
BEFORE USING THIS FAN

When using electrical appliances,
basic precautions should always
be followed to reduce the risk of
fire, electric shock, and injury to
persons, including the following:

FOR US MODELS ONLY - This product
employs overload protection (fuse). A blown
fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the
product from the outlet. Replace the fuse
as per the user servicing instructions (follow
product marking for proper fuse rating)
and check the product. If the replacement
fuse blows, a short-circuit may be present
and the product should be discarded or
returned to an authorized service facility
for examination and/or repair.

1. Use this fan only as described in this

manual. Other use not recommended
as it may cause fire, electric shock or injury
to persons.

2. This product is intended for household
useONLY and not for commercial,
industrial or outdoor use.

3. To protect against electric shock, do not
place fan in window, immerse unit, plug
or cord in water or spray with liquids.

4. This appliance has a polarized plug

(one blade is wider than the other).
To reduce the risk of shock, this plug is
intended to fit only one way in a polarized
outlet. If the plug does not fit fully in
the outlet, reverse the plug. If it still
does not fit, contact a qualified
electrician. DONOTattempt to
defeat this safety feature.

5. Close supervision is necessary when any

appliance is used by or near children.

6. Turn the fan OFF and unplug the fan from

the outlet when not in use, when moving
the fan from one location to another and
before cleaning.

7. To disconnect the fan, first turn the unit
OFF, grip the plug and pull it from the wall

outlet. Never pull the plug by the cord.

8. DO NOT operate the fan in the presence
of explosive and/or flammable fumes.

9. DO NOT place the fan or any parts
near an open flame, cooking or other
heating appliance.

10. DO NOT operate the fan with a damaged
cord or plug or if the product malfunctions,
is dropped or damaged in any manner
(see warranty).

11. DO NOT use an extension cord or power strip
with this fan.

12. Avoid contact with moving fan parts.

13. The use of attachments not recommended

by the manufacturer may be hazardous.

DOUBLE BLADE
WHOLE ROOM STAND FAN

HSF1640 Series

2 3

PART GUIDE

BASE ASSEMBLY

BLADE AND GRILLES ASSEMBLY

1. Align the pole in the base using tabs as a guide.

2. Gently place base on its side. (Fig. 3)

3. Insert and tighten the L shaped bolt and washer

on the bottom of the fan base. (Fig. 4)

4. Tighten by turning clockwise.

The small blade is packaged separately in between cardboard apart from the
large blade DO NOT THROW OUT!

1. Unscrew the blade nut clockwise and the plastic nut counterclockwise

and set aside. (Fig. 5)

2. Position the rear grille onto the fan head assembly making sure the two

alignment holes are aligned with the two prongs.

3. Screw on plastic nut tightly clockwise to attach rear grille. (Fig. 6)

4. Install the blade onto the shaft until the retaining

pin fits into the notch on the blade. Now place
the small blade on to the shaft making sure the
alignment pin is inserted into one of the three
holes on the large blade.

5. Screw blade nut to the motor shaft

counterclockwise (tighten by turning to the left).
(Fig. 7)

6. Mount the front grille and secure using the locking clips.

1 Front Grille
2 Locking Clips
3 Blade Nut
4 Small Blade
5 Large Blade
6 Plastic Nut
7 Rear Grille
8 Fan Head Assembly
9 Control Panel
10 Washer
11 “L” Screw
12 Motor Shaft
13 Alignment Prongs
14 Locking Screw
15 Extension Pole
16 Pole Locking Nut
17 Lower Pole
18 Base
19 Remote Control

12 13

8

14

18

17

16

15

10

11

19

7695

4

3

1

2

14. Place the fan on a dry level surface.

15. DO NOT hang or mount fan on a wall

or ceiling.

16. DO NOT operate if the fan housing

is damaged.

17. A loose fit between the AC outlet (receptacle)

and plug may cause overheating and a
distortion of the plug. Contact a qualified
electrician to replace loose or worn outlet.

18.

DO NOT

operate any fan with a damaged
cord or plug. Discard any damaged fan,
return the fan to the retailer where the
fan was purchased, or request a return
authorization to return to Kaz, Inc. for
examination and/or repair.

19.

DO NOT

run fan cord under carpeting.

DO

NOT

cover cord with throw rugs, runners, or

similar coverings.

DO NOT

route cord under
furniture or appliances. Arrange cord away
from traffic areas and where it will not be
tripped over.

WARNING: To Reduce The Risk of Fire or

Electric Shock, Do Not Use This Fan With Any
Solid State Speed Conrol Device.

FUSED SAFETY PLUG - FOR US MODELS ONLY

USER SERVICING INSTRUCTIONS

• If your fan loses p ower and you suspect t hat the fuse on your fan has b lown,
grasp plug and r emove from the recep tacle or other outlet d evice. Do not
unplug by pullin g on cord.

• Slide fuse cove r, located on the top of the plug t owards the prongs of the p lug.
(Fig. 1)

• Carefully rem ove the blown fuse and s nap a new fuse into place . To Reduce
the Risk of Fir e, replace fuse o nly with 2.5 Amp, 125 volt fus e. Fully close the
fuse door by s liding back into place. ( Fig. 2) Discard the bl own fuse. The plug
should now be re ady for normal use.

• To Reduce the Risk of Fire , do not replace att achment plug. Cont ains a

safety d evice (fuse) that shoul d not be removed. Disc ard product if the
attachment plug is damaged.

• If you need fur ther information on how or w hen to replace the fu se in the
safety p lug, please contac t Kaz Consumer Rel ations Departm ent by visiting
our website at w ww.honey wellpluggedin. com/fans
or calling 18004770457.

This fan features a fused safety plug which is designed to cut off electric current to the fan if an electrical fault
occurs. Please see below for more information on how to properly use your fan and replace the safety plug fuse,
if needed.

Fig. 1

Fig. 2

Fig. 3 Fig. 4

Fig. 5

Fig. 6 Fig. 7

4 5

Remote Control Battery Installation Replacement Instructions

A. Remove battery door by sliding downward in

direction of arrow.

B. Insert 2 AAA batteries into the remote following

the directional guides in the recessed slots.
Batteries are not included.

C. Replace battery door by sliding upward opposite

of arrow direction until door snaps in place.

NOTE: DO NOT MIX OLD AND NEW BATTERIES.
DO NOT MIX ALKALINE, STANDARD (CARBONZINC)
OR RECHARGEABLE (NICKELCADMIUM) BATTERIES.

SEE RECYCLERS IN YOUR AREA FOR PROPER
DISPOSAL OF BATTERIES.

On/Off

To turn fan on, press the Power button ( ) located at the top of the
control panel. (Fig. 10)

Speed Control

To adjust the speed up or down, press the Fan Speed button ( )
repeatedly to increase level of air speed.

1 (Low) 2 (Med.) 3 (High) and Off

FAN OPERATIONFAN OPERATION

HSF1640 SERIES CONTROL PANEL OPERATION

Oscillation

Press the Oscillation ( ) button to select or stop the oscillation.

IMPORTANT NOTE: DO NOT try to manually change the fan head direction; otherwise the fan will be damaged.

HSF1640 SERIES REMOTE CONTROL OPERATION

Fan Speed

On/Off

Timer

Oscillation

Mode

USER SERVICING INSTRUCTIONS

Remote Button Function

Fan Speed Selection, Timer, Oscillation, and Mode Select operate
as described in Control Panel Operation section.

OPERATION

Tilt Control

The airflow can be adjusted upward or downward by tilting the fan head as desired. To change the tilting angle
of the fan head assembly, simply move the fan head to the desired angle. (Fig. 8)

Height Adjustment

Turn the pole locking nut counterclockwise to loosen the pole. Adjust the pole to the desired height and firmly
tighten the locking nut in a clockwise direction. (Fig. 9)

Fig. 9Fig. 8

Mode

Press this key, to select from three featured air flow modes as desired.

Variable: quiet, ideal for night time with a soothing intermittent hi/lo
Breezy: natural air flow intermittent hi/lo
Constant: normal steady air flow

If no mode is selected a normal steady air flow will be on.

Timer

Choose from 1, 2, 4, or 8 hour settings by performing
the following function

(Fig. 10):

• 1 hour: Press the Timer button (

) once.

• 2 hours: Press the Timer button twice.

• 4 hours: Press the Timer button a third time.

• 8 hours: Press the Timer button a fourth time.

Press the Timer button a fifth time to turn the Timer feature off.

Cleaning and Storage

• Be sure your fan is in the OFF position.

• Unplug the fan before cleaning.

• Use only a soft, damp cloth to gently wipe the fan clean.

• DO NOT immerse the fan in water and never allow water to enter the Motor Housing.

• DO NOT use gasoline, paint thinner or other chemicals to clean the fan.

Removal of the Front Grille for Cleaning

• Remove the Front Grille by releasing the Grille clips.

• Unscrew the Blade Knob by turning it CLOCKWISE (REVERSE THREAD).

• Pull the Fan Blade away from the Motor Housing.

• Gently wipe the Fan Blade and Grilles with a soft, damp cloth.

• Assemble the fan by following the last three steps in the ASSEMBLY INSTRUCTIONS.

Storage

• For storage disassemble and clean the fan carefully as instructed. Store the fan in its original box. You may
also leave the fan fully assembled and covered with plastic to protect it from dust. Store your fan in clean,
dry place.

Fig. 10

6 7

CONSIGNES DE
SÉCURITÉ IMPORTANTES

LISEZ ET CONSERVEZ CES
MESURES DE SÉCURITÉ AVANT
D’UTILISER CE VENTILATEUR

Lorsque vous utilisez des appareils
électriques, vous devez toujours
prendre certaines précautions
élémentaires pour réduire les risques
d’incendie, de choc électrique et de
blessure corporelle, notamment les
mesures suivantes :

AUX ÉTATSUNIS SEULEMENT - Cet
appareil est muni d’une protection contre
les surcharges (fusible). Un fusible grillé
indique une surcharge ou un court-circuit.
Si le fusible grille, débranchez l’appareil de
la prise de courant. Remplacez le fusible
conformément aux instructions d’utilisation
(respectez les spécifications inscrites sur
la plaque signalétique de l’appareil pour
connaître le calibre approprié du fusible) et
vérifiez l’appareil. Si le fusible de rechange
grille, il peut y avoir un court-circuit et
l’appareil devrait être jeté ou retourné à un
centre de réparation autorisé pour examen
et/ou réparation.

1.

N’utilisez ce ventilateur que selon la description
dans ce manuel. Toute autre utilisation n’est
pas recommandée puisqu’elle pourrait causer
un incendie, un choc électrique ou des
blessures corporelles.

2. Cet appareil est conçu pour un usage domestique
SEULEMENT et non pour un usage commercial,

industriel ou à l’extérieur.

3. Pour vous protéger contre les chocs électriques,
ne placez pas le ventilateur dans une fenêtre, ne
submergez pas l’appareil, la fiche ou le cordon
dans l’eau et ne le vaporisez pas de liquides.

4. Cet appareil est muni d’une fiche polarisée (une
des deux broches est plus large que l’autre).
Pour réduire les risques de choc, cette fiche ne
peut s’insérer que d’une seule manière dans
une prise polarisée. Si les broches n’entrent pas
complètement dans les trous de la prise, tournez la
fiche dans l’autre sens. Si elles n’entrent toujours
pas, communiquez avec un électricien qualifié

N’ESSAYEZ PAS d’altérer ce dispositif de sécurité.

5. Une étroite supervision est nécessaire lorsque

tout appareil est utilisé par des enfants ou
près d’enfants.

6. ÉTEIGNEZ et débranchez le ventilateur lorsqu’il
ne fonctionne pas, avant de le déplacer d’un
endroit à un autre et avant de le nettoyer.

7. Pour débrancher le ventilateur, commencez par
L’ÉTEINDRE, saisissez la fiche et tirez-la de la

prise électrique. Ne tirez jamais sur le cordon.

8. NE FAITES PAS ofonctionner le ventilateur
en présence d’explosifs et/ou de
vapeurs inflammables.

9

. NE PLACEZ PAS le ventilateur ni aucune pièce

près d’une flamme nue, d’un appareil de cuisson
ou d’un autre appareil de chauffage.

10. NE FAITES PAS fonctionner le ventilateur avec un
cordon ou une fiche endommagé ou s’il fonctionne
mal, si on l’a échappé ou s’il est endommagé de
quelque façon que ce soit (voir la garantie).

CONSUMERRELATIONS

1 YEAR LIMITEDWARRANTY

DOUBLE HÉLICE
VENTILATEUR SUR PIED
POUR UNE PIÈCE ENTIÈRE

Série HSF1640

You should first read all instructions before
attempting to use this product.

A. This 1 year limited warranty applies to repair

or replacement of product found to be
defective in material or workmanship. This
warranty does not apply to damage resulting
from commercial, abusive, unreasonable use
or supplemental damage. Defects that are
the result of normal wear and tear will not be
considered manufacturing defects under this
warranty. KAZ IS NOT LIABLE FOR INCIDENTAL

OR CONSEQUENTIAL DAMAGES OF ANY
NATURE. ANY IMPLIED WARRANTY OF
MERCHANTABILITY OR FITNESS FOR A
PARTICULAR PURPOSE ON THIS PRODUCT
IS LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY. Some jurisdictions do not

allow the exclusion or limitation of incidental or
consequential damages or limitations on how
long an implied warranty lasts, so the above
limitations or exclusions may not apply to you.
This warranty gives you specific legal rights, and
you also may have other rights which vary from
jurisdiction to jurisdiction. This warranty applies
only to the original purchaser of this product from
the original date of purchase.

B. At its option, Kaz will repair or replace this

product if it is found to be defective in material
or workmanship.

C. This warranty does not cover damage resulting

from any unauthorized attempts to repair or
from any use not in accordance with the
instruction manual.

Call us tol l-free: 18004770457 or
e-mail: consumerre [e-mail]

Please be s ure to specify a model n umber
located on t he box and the back and bot tom
of your unit.

To register your pro duct, please go to
www.honeywell pluggedin.com/register to register your
product under the Customer Care Center and receive
product information updates and new promotional offers.

NOTE: IF YOU E XPERIENCE A PRO BLEM, PLEAS E
CONTACT CO NSUMER RELATION S FIRST OR SEE YOUR
WARRA NTY. DO NOT RETUR N THE PRODUCT TO T HE
ORIGINA L PLACE OF PURCH ASE. DO NOT ATT EMPT
TO OPEN THE MO TOR HOUSING YOURS ELF, DOING SO
MAY VOID YOUR WARR ANTY AND C AUSE DAMAGE
TO THE PROD UCT OR PERSONA L INJURY.

Questions or Comments

Call us toll-free at: 18004770457
E-mail: [e-mail]
Or visit our website at: www.HoneywellPluggedIn.com/fans

Please be sure to specify model number.