Honeywell HS-6270 User Manual

for the safety and happiness of your home

Home System

HS-6270

User's Manual

To get the best u se of the pro duct, ple ase
read the us er's manu al carefu lly befor e
using the p roduct.

Keep the us er's manu al at an easi ly access ible
place and m ake it avai lable to th e next user.

The speci ficatio n of produc t picture m ay vary the
model.

Accessing the fire/gas control test mode

Press ,

Press ,

Press

Press , to shift to gas test mode .

, to shift to fire test mode.

※ Refer to page 16 for more details.

Contents

Safety Precautions

Usage Suggestions

Parts of HS-6270

Function Setting

Adjusting the Volume of the Bell

Adjusting the Brightness of the Screen

Adjusting the Volume of the Phone

Setting the Safety Zone

Setting, Changing, and Checking the Exit/Entry
Delay

Phone Call Function

Telephone Function

Answering the Phone

Making a Phone Call

Talking to Someone at the Door

Taking Calls from the Door

Monitoring the Door

7

Setting, Changing, Deleting, and Checking
the Password

7

7

8

9

Interphone Function

Answering the Interphone

11

Making a Call over the Interphone

11

Reaching the Guard Post

Taking Calls from the Guard Post

11

How to Reach the Guard Post

11

Talking to Someone at the Common Entrance

Taking Calls from the Common Entrance

2

5

6

10

12

12

12

12

13

Security and Alarm Functions

Away Mode

Sleep (stay) Mode

Room Mode (deactivating the away and sleep modes)

In Case of Emergency

Reporting an Emergency

In Case of Fire or Gas Leakage

In Case the Security Alarm is Activated

Electronic Bullet Board Function
Saving Image Function

Using the Camera

Troubleshooting

Product Specifications

Product Warranty

Deactivating the Emergency Alarm

14

Testing the Alarm Sound

14

15

15

15

15

16

16

17
18

19

20

21

22

HS-6270 User's Manual / 1

Safety precautions

To prevent property damage, make sure you have read the "Safety Precautions"

before using your system.

The following symbols denote the degree of damage that may arise in case of failure to
follow the specified precautions.

Warning Caution

Indicates the serious damage or
even loss of life that may result
from failure to follow instructions.

The following symbols denote the points that should be followed by the user.

Warning

"Prohibitory", meaning the
action being referred to
should never be taken.

Refers to injury or property damage
that may result from failure to follow
instructions.

Warning

"Mandatory", meaning you
should follow the
instructions indicated.

Warning Warning

2 / Honeywell Co., Ltd.

Do not disassemble at
any time (may result in
property damage or loss
of life).

Do not touch (may result
in property damage or
loss of life).

Warning

Safety precautions

Keep the product away from moisture

(contact with moisture or other liquids
may cause fire, electric shock, or
malfunction).

If the panel comes into contact with
water, unplug the cord immediately
to avoid electric shock or fire.

Keep the product away from sources
of heat to avoid fire or malfunction.

When the alarm sounds, take
appropriate measures immediately.

Intrusion, fire, or gas leak may lead to
hazardous situations.

Do not disassemble or modify the
product (may lead to electric shock,

fire, or malfunction).

Do not use the product in places
exposed to inflammable gases or
debris such as propane gas or
gasoline (may cause explosion or fire).

Check the gas sensor monthly.
Replace it after 4 years.

Malfunction may result in hazardous
situations.

Replace the fire sensor every 2 years.

Malfunction may result in hazardous
situations.

HS-6270 User's Manual / 3

Caution

Safety precautions

Do not use benzene or other volatile
substances (may damage the product).

Do not place the product near large
TV's or speakers that generate strong
magnetic forces

(may cause malfunction).

Do not install on an unstable location

(may get detached and result in
breakdown or injury).

Keep away from direct sunlight.
Do not store in high-temperature
areas (may cause product deformation

or malfunction).

Keep out of reach of children

(product may cause injury).

Child users should be instructed on
the product's proper use. Adult
supervision is recommended to
avoid injury.

Do not apply shock or impact to the
product (may cause breakdown).

When the gas leak alarm sounds, perform the following steps.

1) Close the gas valve immediately and open the windows and doors to secure ventilation.

2) Do not unplug or plug in electrical devices.

3) Do not open the refrigerator.

4) When the gas is completely removed, check the gas appliance.

4 / Honeywell Co., Ltd.

Usage suggestions

To get the best use of the product, take note of the following.

1. When using the gas alarm and/or fire sensor, follow the manufacturer's instructions.

2. Make sure that the product is impervious to volatile gases to avoid sounding the fire alarm by
mistake.

3. In case of product breakdown, do not disassemble the body or sensor. Contact the vendor.

4. In case the main panel goes out of order, contact the vendor.

5. Use the emergency button only when necessary.

6. The product does not function during blackout or in case the circuit breaker is shut down.

7. To clean the product, use a soft cloth.
Do not use volatile liquids (i.e. benzene, thinner) or wet cloth to clean the product.

HS-6270 User's Manual / 5

Parts of HS-6270

Parts of the control panel

Fire/Gas Lamp

Signals a fire/gas alarm.

Function Lamp

Function Lamp

Indicates the function setting status.

Indicates the function setting status.

Power Lamp

Away Button/Lamp

Sets your home to away
mode and indicates that the
system is in away status.

Speaker

LCD

Shows an image of the entrance.

Safety Zone Lamp

Indicates the Safety Zone and
Burglar Alarm states.

Stay Lamp

Indicates the stay setting status.

10KEY, (stop), # (reset) button

Used when inputting numbers for
dialing/function setting/entering
the code.

Emergency Button/Lamp

Used in case of
emergencies; indicates the
emergency status.

Talk Button/Lamp

Used when talking over the telephone
and interphone.

Guard Button/Lamp

Used when calling the guard post
and common entrance.

Door Button/Lamp

Used when talking to someone at the door.

6 / Honeywell Co., Ltd.

Microphone

Test/Function (open)

Opens the door to the
entrance or common
entrance.

※ The location of the lamps and specifications may vary by model.

Function Setting

Adjusting the Volume of the Bell

Press the button.

1.

Press .

2.

Press (low), (medium), or (high) to adjust the volume level.

3.

To end the function setting menu, press the button.

4.

Adjusting the Brightness of the Screen

1.

Press the button.

Press .

2.

3.

Press (dark), (medium), or (bright) to adjust the brightness level.

4.

To go to another function setting menu, press .

5.

To end the function setting menu, press the button.

Adjusting the Volume of the Phone

1.

Press the button.

Press .

2.

Press (local), (door), (guard post), (common entrance), or (interphone).

3.

Press (small) ~ (large).

4.

5.

To end the function setting menu, press the button.

The volume is set to medium level when released.

6.

HS-6270 User's Manual / 7

Function Setting

Setting the Safety Zone

※ When activating the security system, you can set the Safety Zone.

Press the button.

1.

Press .

2.

Press (Safety Zone 1), (Safety Zone 2), (Safety Zone 3), or (Safety Zone 4),

3.

then the corresponding safety zone lamp blinks. Press it again to turn off.
Pressing the corresponding safety zone button causes the safety zone to be set

(not monitored: safety zone lamp blinks; monitored: safety zone lamp goes out).

4.

To go to another function setting menu, press .

5.

To end the function setting menu, press the button.

The zone setting is not affected, even though alarm function or away mode and/or
sleep mode is deactivated.

8 / Honeywell Co., Ltd.

Function Setting

Setting, changing, and checking the exit/entry delay

※ You can set the delay time for activating your security system for exit/entry.
※ Exit Delay refers to the time given by the system to let you exit the house before the

system is activated.
※ Entry Delay refers to the time given by the system to let you deactivate the system after

entering the house.
※ Optional function; may not be available in some models.

[ Setting and changing the entry/exit delay ]

1.

Press the .

2.

Press the button.

Press

3.

6

0

~

(Number X 15 sec. = immediatelhy ~ 4 min.) To

save the desired setting. (Initially set to 30 sec).

4.

If desires to input again, start with the step 3.
If desires to confirm the time, start from the step 3 of Checking the entry/exit.
Press to enter other menu setting.

5.

To exit the function setting mode, press the button.

If the delay is set to 0, the alarm system is activated immediately after setting the away mode.

ex) setting entry/exit delay to 1 min.

→

+

+

[ Checking the entry/exit delay ]

1.

Press the button.

Press .

2.

3.

Press the button to hear the saved entry/exit delay time through the sound.

4.

If desires to input again, start with the step 3.
If desires to confirm the time, start from the step 3 of Setting and change the entry/exit
delay.
Press to enter other menu setting.

5.

To exit the function setting mode, press the button.

Ex) Checking the entry/exit delay →

Press

+ + ▶"The clue sound 'zero,four' "

HS-6270 User's Manual / 9

Function Setting

Setting, Changing, Deleting, and Checking the Password

※ One household can have up to four passwords.

※ Be sure to remember the password for deactivating the security system and alarm.

[Setting/Changing the Password]

Press the button.

1.

2.

Press .

3.

Enter the password (four digits).

4.

Press .

5.

To save the password to ( ~ ), press the corresponding button.

6.

To continue entering passwords, start with the step 3. To check the password you entered,
go to [Checking Password] 3.

To end the function setting menu, press the button.

7.

Ex) To set the password to [1111] →

▶ "The number is set"

+ +

+

+

[Deleting the Password]

Press the button.

1.

2.

Press .

3.

Press .

4.

To delete the password from ( ~ ), press the corresponding button.

5.

To continue deleting passwords, start with the step 3. To check the password you entered,
go to [Checking Password] 3.

To end the function setting menu, press the button.

6.

Ex) To delete the password saved to [1] →

+ ++

▶ "The number is set"

[Checking the Password]

Press the button.

1.

2.

Press .

3.

Press .

4.

Press the button of ( ~ ) to check the password. You will then hear the saved password.

5.

6.

10 / Honeywell Co., Ltd.

To continue checking passwords, start with the step 3.

To end the function setting menu, press the button.

Ex) To check the password saved to [1]→

+ +

+

▶ "The password is one, one, one, one"

Phonecall function

Telephone function

※ Optional function; may not be available in some models.

[ Answering the phone ]

1.

The phone bell rings/the talk lamp blinks.

2.

Pressing (Talk) causes the talk lamp to light up.

You are now ready talk to the caller.

3.

[ Making a phone call ]

1.

Pressing (Talk) causes the talk lamp to light up.

2.

Dial the number to make your call.

To hang up, press (Talk)

.

Talking to someone at the Door

[ Taking calls from the Door ]

1.

The door bell rings/the door lamp blinks/you can see the door
on the screen.

2. Pressing (Door) causes the door lamp to light up.

Talk to the visitor.

3.

To terminate the call, press (Door) .
You have three minutes to talk to the person at the door before the line is automatically terminated.
When someone calls from the door, or if you are using the phone, you can open the entrance door

by pressing .

The door opening function is available only when a separate device is installed.

[ Monitoring the Door ]

1.

Press (Door) .

The door lamp blinks/the image is shown on the screen (monitoring).

2.

To stop monitoring, press (Door) .

You have 30 seconds to monitor the door before it is automatically terminated.

HS-6270 User's Manual / 11

Phonecall function

Interphone function

[Answering the interphone]

1.

The interphone bell rings/the talk lamp blinks.

Pressing the (Talk) button causes the talk lamp to light up.

2.

3.

Talk to the person on the other flat.

[ Making a call over the interphone ]

Press the (Talk) button.

1.

You will hear the dial tone after pressing the button.

2.

Press the address number of the flat you want to call.

3.

ex) Making a call to Apt. no. 101, flat number 1004 →

To hang up, press the (Talk) button.

You have three minutes of talk time before the line is automatically terminated.

In case you get a call from the telephone and interphone at the same time,
press the(Talk) button to be connected to the telephone.

Reaching the guard post

[ Taking calls from the guard post ]

1.

The guard post bell rings/the guard lamp blinks.

Pressing the (Guard ) button causes the lamp to light up.

2.

3.

Talk to the guard.

[ How to reach the guard post ]

Pressing the (Guard ) button causes the lamp to light up.

1.

Talk to the guard.

2.

To hang up, press the (Guard ) button.
You have three minutes to complete your call before the line is automatically terminated.

(Talk)

++ + + +

12 / Honeywell Co., Ltd.

Phonecall function

Talking to someone at the common entrance

[ Taking calls from the common entrance ]

1.

The common entrance bell rings/the guard lamp blinks/the image is shown
on the screen.

2.

Pressing the (Guard ) button causes the guard lamp to light up.

3.

Talk to the visitor.

To stop talking, press the (Guard ) button.

You have three minutes to talk to the person at the common entrance before
the line is automatically terminated.

Pressing the while talking to the entrance or over the telephone
causes the entrance door to open.

When setting the away mode (refer to page 14), the call from the common entrance is
automatically connected to the guard post.

When you get another call while talking to someone over the telephone or
interphone, you can answer the new call only after terminating the first call.

button

HS-6270 User's Manual / 13

Security and Alarm Functions

Away Mode

※ Away Mode, You can activate the security system when leaving the house.

1.

Press [Away].

2.

Press .

The Away lamp and Safety Zone lamp for monitoring are then lit.
Message: "Security system is activated."
Away warning sound of "toot-toot" is then heard.

During setting, the away mode is not set if the security zone except the entrance door and living
room is breached (or sensed). The corresponding safety zone lamp then blinks, and the
message Security system is not activated. Please check and try again is displayed.

▶

When setting the away mode, the away status is transmitted to the guard post.

" "

Press [Away].

Caution

The system considers you an intruder if you do not leave the house while the away
warning alarm sounds. As a result, the security system is activated.

Sleep (stay) Mode

※ You can activate the security system when you are at home.

1.

Press [Away].

2.

Press .

3.

The Stay lamp and Safety Zone lamp for monitoring are then lit.
Message: "Security system is activated."

During setting, the Sleep mode is not set if the security zone is breached (or sensed). The
corresponding safety zone lamp then blinks, and the message Security system is not
activated. Please check and try again is displayed.

▶

Press [Away].

When setting the away mode, the away status is transmitted to the guard post.
When the sleep mode is activated, the living room is not monitored; thus enabling you to move
freely inside the house.
If you have a visitor or wish to go outside while the sleep mode is activated, you need to
deactivate the sleep mode first.

"

"

14 / Honeywell Co., Ltd.

Security and Alarm Functions

Room Mode (deactivating the away and sleep modes)

※ You can deactivate the security system.

1.

Input the "four- digit password" + + .
Message: "The security system is deactivated."

When you open the entrance door while the Exit or Sleep mode is activated, the security system
is disabled during the previously set entrance delay time with the warning alarm ("toot-toot" sound).

Caution

If you do not set the Room mode while the warning alarm sounds, you are considered
an intruder, and the security system is activated.

In Case of Emergency

[Reporting an Emergency]

1.

Press the [Emergency] button on the bottom left.

2.

The [Emergency] lamp then blinks.

Caution

[In Case of Fire or Gas Leakage]

1.

The Fire or Gas lamp on top blinks. / the corresponding alarm is issued.

[In Case the Security Alarm is Activated]

Use the [Emergency] button only when necessary.

1.

The corresponding safety zone lamp blinks.
Message: "Intruder found!"

The security status is transmitted to the guard post.

HS-6270 User's Manual / 15

Security and Alarm Functions

Deactivating the Emergency Alarm

1.

Enter the password.

2.

To turn off the warning sound, press the stop button.

3.

To deactivate the alarm completely, press the return button.

You need to finish your call or monitoring first to deactivate the alarm while talking
on the phone or monitoring the entrance.

Caution

Caution

If the gas leak or cause of fire is not removed completely, the alarm is activated again.

In case of gas leak, close the gas valve, open the windows to allow ventilation, and
wait until the sensor lamp turns green. Do not turn on any electrical device.

You can perform deactivating and resetting by pressing stop and return even
while the gas or fire alarm is activated (according to the laws and regulations on fire
prevention).

Testing the Alarm Sound

1.

Press the button.

2.

Press .

3.

Press for emergency, for fire, for gas, or for intrusion.

4.

The lamp then blinks, and the corresponding alarm sounds (in case of emergency,
however, only the lamp blinks).

5.

To turn off the warning sound, press stop .

6.

To terminate the test, press return .

16 / Honeywell Co., Ltd.

Electronic Bullet Board Function

Electronic Bullet Board Function

[View Info Title]

1.

Press the button and then press to display the information title.

2.

The title shows 20 letters at the first part of the information.

[View Info Content]

1.

Press the No. , ~ , on the title menu of the information.

2.

To select the 10th one on the Information No., Press .

3.

It displays “Loading---” at first during reading the information , then turn to the menu,
finally the information content.

4.

The reading time depends on the length of the information. 220 letters need about 10
seconds.

[Return the information content to the title content]

1.

To return to the title menu, press .

[End the Information Menu ]

1.

To end the information menu and exit, press button or .

It auto ends after 30 seconds without pressing any button.

[Information Event]

1.

If there is new information , the content will display automatically for 3 seconds on the
menu and the melody will ring at same time.

2.

After the auto display, the FUNCTION light will flash continuously to inform that the new
information reaches.

3.

If checks the information in one minute and press , the menu will turn off.

HS-6270 User's Manual / 17

Saving Image Function

To Modify Time

2009.04.06 10:00:30

To Record the image of the visitor

1

entrance monitor, press to start recording.

2

entrance, it will record automatically.

Press [Door] + to go to SET UP MODE in

1

Time Modify.

Press to remove the cursor to the modify

2

position.

Press to increase the value, press to

3

decrease the value. After the time check, press to
remove the cursor to the position to modify.

To exit fromTime Setup Mode , press .

4

When the visitor is calling at entrance or pressing the

When Away Mode is set but the visitor calls at

2009.04.06 10:00:30

To Check the image

Press [Door] + to display the

1

recorded image.

Press to display the next menu.

2

2009.04.06 10:00:30

The recorded image is in color style. When the
amount of the images is over 50 pieces, the 51st one
would cover the first one, the 52nd one would cover
the second one, so does the following one.

To Delete the image

1

Press [Door] + to display the

recorded image.

2

Press to delete the all saved

images.

2009.04.06 10:00:30

18 / Honeywell Co., Ltd.

Parts of the camera

Using the camera

Camera lens

HOME SYSTEM

COLOR DOORPHONE

HC-6000

CALL

Speaker

When you are talking to
someone at the entrance, your
voice will be heard outside.

Microphone

Used to talk to someone
at the entrance.

Call button

Used when calling your neighbor.

The camera is subject to change without prior notice.

HS-6270 User's Manual / 19

Troubleshooting

Please check the manual before reporting a malfunction.

Check the list below before requesting for repair.

Symptom

The panel is not working.

The screen is fuzzy.

The alarm has been activated
and cannot be deactivated even
after pressing the reset button.

The exit mode cannot be set.

The functions are not working
as intended.

The following are not malfunctions:

The doorphone camera and common entrance camera screens may become fuzzy under strong sunlight or headlights.

The image may flicker slightly after pressing the call button.
A motorcycle or car passing by the doorphone camera may affect the image on the screen.

Is the red light on the control panel
turned on? (Check the power)

Is the brightness setting appropriate?
(Check the menu)

Are there stains in the screen and camera
lens?

Is there moisture in the camera?

Did you follow the steps in sequence?
(Check the menu)

Check for open doors
(burglar alarm system).

Refer again to the user's manual.

Check the following

Reference

20 / Honeywell Co., Ltd.

Product specifications

Product specifications

The appearance and specific ations in the user's manual may be changed with out prio r notic e for product
improvement purposes.

Electrical specifications and characteristics

Classification

Power voltage

Dimensions(mm)

Weight

Temperature

Surrounding humidity

Power

consumption

Normal

Maximum

Control panel

220V AC

296 x 205 x 47

Approx. 1100 g

-10 ~ 40℃

0 ~ 80%

5W

25W

Camera

DC 12V

120 x 120 x 39

Approx. 200g

-10 ~ 40℃

0 ~ 80%

0.2W

2.4W

HS-6270 User's Manual / 21

Product warranty

Product warranty

Model

HS-6270

Date of purchase

Warranty period

1 year

Product serial number

Store of purchase

※ This product has gone through strict quality inspections prior delivery.

※ hMalfunction during use shall be repaired by the designated service or call center.

Warranty rules

※ Malfunctions occurring during normal use and within the warranty period shall be repaired free of charge.
※ Malfunctions occurring during normal use and beyond the warranty period shall be repaired for a

reasonable fee.
※ Malfunctions due to natural disasters shall be repaired for a reasonable fee.

Date of occurrence

of malfunction

※ The cause of malfunction is very important; please give as much details as you can.

※ This product is subject to change without prior notice.

Contact:

22 / Honeywell Co., Ltd.

Cause of

malfunction

Repair details

Person in charge

Honeywell Security & Data Collection

For more information:

Asia Pacific Headquarters Tel:[phone] India Tel:[phone]
Australia Tel:[phone] Korea Tel:[phone]
China Tel:[phone] Singapore Tel:[phone]
Hong Kong Tel:[phone] Tainwan Tel:[phone]

www.asia.security.honeywell.com
security.ap honeywell.com

@

Automation & Control Solutions
Honeywell Security-Asia Pacific
Honeywell International Inc. Jan 2009
www.security.honeywell.com 2009 Honeywell International Inc.

CC

The location of the lamps and specifications as shown in the picture above may vary slightly from the actual product.

The World's Best Customer Service!

We at Honeywell provide the world's best

customer service to enable our customers to

enjoy a convenient and happy life.

The contents of this user's manual are subject to change without prior notice.

Automation&Control Solutions
Honeywell Security-Asia Pacific
Honeywell International Inc. Jan 2009
www.security.honeywell.com 2009 Honeywell International Inc.