HRHD Plus series Digital Video Recorder
- 1 - HRHD4+, 9+, 16+
HONEYWELL VIDEO SYSTEMS’ HRHD4+, 9+ and 16+ MULTI-CHANNEL DIGITAL
VIDEO RECORDER
PART 1 – GENERAL
A. The intent of this document is to specify the minimum criteria for the design,
supply, installation, and commissioning of the Multi-Channel Digital Video
Recorder.
1.01 SUMMARY
A. The high performance digital recording system shall combine the benefits of
digital recording with the advanced processing of a multiplexer, providing a
powerful, digital solution for a variety of video surveillance applications.
1.02 REFERENCES
A. American National Standards Institute (ANSI)
B. Conformity for Europe (CE)
C. Consultative Committee for International Radio (CCIR)
D. Electronic Industry Association (EIA)
E. Federal Communications Commission (FCC)
F. Instit ute of Electrical and Electronics Engineers (IEEE)
G. International Electrotechnical Commission (IEC)
H. Multi Layer Joint Photographic Experts Group (ML-JPEG)
I. National Television System Committee (NTSC)
J. Phase Alternation by Line (PAL)
K. Underwriters Laboratories Inc. (UL)
L. Underwriters Laboratories of Canada (ULC)
1.03 DEFINITIONS
A. No Substitutes: The exact make and model number identified in this
specification shall be provided without exception.
B. Or Equal: Any item m ay be substituted for the specified item provided that in
every technical sense, the substituted item provides the same or better
capability and functionality.
C. Or Approved Equal: A substitute for the specified item may be offered for
approval by the Owner. The proposed substitution must, in every technical
sense, provide the same or better capability and functionality as the specified
item. Such requests for approval shall be submitted in accordance with the
provisions of PART 1.05 – SUBMITTALS, and must be obtained within the
time frames outlined.
HRHD Plus series Digital Video Recorder
- 2 - HRHD4+, 9+, 16+
1.04 SYSTEM DESCRIPTION
1. The full featured, multi-channel digital video recorder shall combine the
benefits of digital recording with the advanced processing of a multiplexer.
Featuring XtraStor, an advanced proprietary compression algorithm, the
unit must provide more storage on smaller media without sacrificing image
quality, resulting in days, weeks, and even months of high-resolution
storage.
1.05 SUBMITTALS
A. General: Submittals shall be made in accordance with the Conditions of the
Contract and Submittal Procedures Section.
B. Shop Drawings and S chematics: Shall depict the Multi-Channel Digital Video
Recorder in final proposed “as built” configuration. The following must be
provided:
1. Connection diagrams for interfacing equipment.
2. List of connected equipment.
3. Locations for all major equipment components to be installed under this
specification.
C. Product Data: The following shall be provided:
1. Technical data sheets.
2. A complete set of instruction manuals.
D. Quality Assurance Submittals: The following shall be submitted:
1. Checkout Report: The Contractor shall provide the Owner with a checkout
report for each Multi-Channel Digital Video Recorder. The report shall
include:
a. A complete list of every device.
b. The date it was tested, and by whom.
c. If retested, the date it was retested, and by whom.
d. The final test report shall indicate that every device was tested
successfully.
1. Manufacturer’s Instructions: The Contractor shall deliver TBD sets of
System Operation and Maintenance Manuals (if available) to the Owner.
2. Notice of Completion: When the final acceptance has been satisfactorily
completed, the Owner shall issue a notice of completion to the Contractor.
HRHD Plus series Digital Video Recorder
- 3 - HRHD4+, 9+, 16+
1.06 QUALITY ASSURANCE
A. Manufacturer’s Qualifications: The Multi-Channel Digital Video Recorder
manufacturer shall be the world’s largest and most experienced manufacturer
of electronic security systems, with over seventy years of experience in the
security industry. The manufacturer shall provide 24/7 technical assistance
and support via a toll-free telephone number at no extra charge.
1.07 DELIVERY, STORAGE, AND HANDLING
A. General: Delivery, storage, and handling of the Multi-Channel Digital Video
Recorder shall be in accordance with the manufacturer’s recommendations.
B. Ordering: The manufacturer’s ordering instructions and lead-time
requirements must be followed in order to avoid installation delays.
C. Delivery: The Multi-Channel Digital Video Recorder shall be delivered in the
manufacturer’s original, unopened, undamaged container with identification
labels intact.
D. Storage and Protection: The Multi-Channel Digital Video Recorder shall be
stored and protected from exposure to harmful weather conditions and at the
environmental conditions recommended by the manufacturer.
1.08 PROJECT CONDITIONS
1.09 SEQUENCING
1.10 SCHEDULING
1.11 WARRANTY
A. General: The warranty period shall be a minimum of thirty-six (36) months
from the manufacture date code under normal use and service. The warranty
period for hard drives shall be a minimum of twelve (12) months from date of
manufacture.
1.12 MAINTENANCE
A. Preventat ive Maintenance Agreement during Warranty: As a separate price
item, the Contractor shall provide preventative maintenance during the
warranty period. Maintenance shall include, but no be limited to:
1. Labor and materials, at no additional cost, to repair the Multi-Channel
Digital Video Recorder.
HRHD Plus series Digital Video Recorder
- 4 - HRHD4+, 9+, 16+
2. Labor and materials, at no additional cost, to provide test and adjustments
to the Multi-Channel Digital Video Recorder.
3. Regular inspections.
B. Preventative Maintenance Agreement: As a separate price item, the
Contractor shall provide a complete Maintenance Agreement for a period of
TBD months after the conclusion of the warranty period. The Maintenance
Agreement shall include, but not be limited to:
1. Labor and materials, at no additional cost, to repair the Multi-Channel
Digital Video Recorder.
2. Labor and materials, at no additional cost, to provide test and adjustments
to the Multi-Channel Digital Video Recorder.
3. Regular inspections.
1.13 TRAINING
A. Operator training shall be conducted for a minimum of TBD sessions, with a
minimum session length of TBD hours at the customer’s site.
B. Training shall include, but not be limited to the Multi-Channel Digital Video
Recorder operation and diagnostics.
PART 2 – PRODUCTS
2.01 MANUFACTURED UNITS
A. Model Number/Descriptions Table
HRHD4+
HRHD4C80 HRHD 4 Channel NTSC Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD4C80X HRHD 4 Channel PAL Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD4C160 HRHD 4 Channel NTSC Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD4C160X HRHD 4 Channel PAL Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD4C320 HRHD 4 Channel NTSC Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD4C320X HRHD 4 Channel PAL Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD4C500 HRHD 4 Channel NTSC Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
HRHD4C500X HRHD 4 Channel PAL Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
HRHD9+
HRHD9C80 HRHD 9 Channel NTSC Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD9C80X HRHD 9 Channel PAL Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD9C160 HRHD 9 Channel NTSC Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD Plus series Digital Video Recorder
- 5 - HRHD4+, 9+, 16+
HRHD9C160X HRHD 9 Channel PAL Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD9C320 HRHD 9 Channel NTSC Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD9C320X HRHD 9 Channel PAL Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD9C500 HRHD 9 Channel NTSC Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
HRHD9C500X HRHD 9 Channel PAL Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
HRHD16+
HRHD16C80 HRHD 16 Channel NTSC Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD16C80X HRHD 16 Channel PAL Digital Recorder w/ 80GB Fixed IDE Hard Drive & internal CDRW
HRHD16C160 HRHD 16 Channel NTSC Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD16C160X HRHD 16 Channel PAL Digital Recorder w/ 160GB Fixed IDE Hard Drive & internal CDRW
HRHD16C320 HRHD 16 Channel NTSC Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD16C320X HRHD 16 Channel PAL Digital Recorder w/ 320GB Fixed IDE Hard Drive & internal CDRW
HRHD16C500 HRHD 16 Channel NTSC Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
HRHD16C500X HRHD 16 Channel PAL Digital Recorder w/ 500GB Fixed IDE Hard Drive & internal CDRW
2.02 SYSTEM PERFORMANCE
A. The Multi Channel Digital Video Recorder shall include, as a minimum, the
following features/functions/specifications:
1. The Multi Channel Digital Video Recorder must be pr otected by the most
extensive support services in the industry, including Customer Service,
Pre Sales Applications Assistance, After Sales Technical Assistance,
access to Technical Online Support, and Online Training using web
conferencing. The manufacturer shall provide 24/7 technical assistance
and support via a toll free telephone number at no extra charge.
2. The Multi Channel Digital Video Recorder and its components shall be
thoroughly tested before shipping from the manufacturer’s facility.
3. The Multi Channel Digital Video Rec order shall be available with four (4),
nine (9), or sixteen (16) auto terminating BNC composite video inputs.
The units must include corresponding BNC looping video outputs.
4. The Multi Channel Digital Video Recorder shall include a BNC composite
main video output, a BNC composite spot video output, and an S VHS
Mini Din video output. The outputs shall be capable of simultaneously
showing the same video on individual monitors.
5. The Multi Channel Digital Video Recorder shall offer internal hard drive
options of 80 Gigabytes, 160 Gigabytes, 320 Gigabytes or 500 Gigabytes.
The unit must also have the ability to archive encrypted video to an
external Universal Serial Bus (USB) – Integrated Drive Electronics (IDE)
hard drive or a built-in internal CD RW drive, allowing the archived images
HRHD Plus series Digital Video Recorder
- 6 - HRHD4+, 9+, 16+
to be viewed on computers running Microsoft® Window 98, ME, 2000 or
XP. The manufacturer must have a list readily available of compatible CD
RW drives. The video shall be saved in a self-executable file format that
contains the video player and image enhancement tools, allowing the user
to play the clip in its original, unalterable format on any PC without the
need for additional reader software.
6. The Multi Channel Digital Video Recorder shall also support external SCSI
HDD (RAID) drives.
7. The Multi Channel Digital Video Recorder shall have the option of
recording until the hard disk is full, alerting the operator with an internal
beep and/or an output activation, and stopping the recording to allow the
operator to review and backup images prior to overwriting them.
Otherwise, the unit must continuing recording once the hard disk is full,
overwriting the oldest video in “first in, first out”(FIFO) manner, ensuring
that the most recent images are always available.
8. The Multi Channel Digital Video Recorder’s recorded images shall utilize
advanced video encryption, with each image containing a unique
fingerprint that is chained with the preceding and succeeding images
(chained fingerprinting). This shall insure that the video images cannot be
modified with any available PC software, enabling a solid chain of
evidence.
9. The Multi Channel Digital Video Recorder must utilize ML JPEG, an
advanced image compression technology that allows for extremely low
data storage requirements (for longer recording durations), high quality
images, and faster transmission speeds using less network bandwidth.
10. The same Multi Channel Digital Video Recorder shall be able to operate
on either NTSC or PAL, utilizing the identical software, at either 120VAC
or 230 VAC. The user shall select NTSC or PAL using a simple switch
located on the rear panel of the unit.
11. The Multi Channel Digital Video Recorder shall display high definition
video with a minimum resolution of 720x480 (NTSC) or 720x576 (PAL).
12. The Multi Channel Digital Video Recorder shall record high definition video
with a resolution of either 336x244 or 672x244 (NTSC), or 336x272 or
672x272 (PAL).
13. The Multi Channel Digital Video Recorder shall offer the following
recording speeds:
a. One (1) image every ten (10) seconds
HRHD Plus series Digital Video Recorder
- 7 - HRHD4+, 9+, 16+
b. One (1) image every four (4) seconds
c. One (1) image every two (2) seconds
d. One (1) image per second
e. Two point five (2.5) images per second
f. Five (5) images per second
g. Ten (10) images per second
h. Fifteen (15) images per second
i. Twenty (20) images per second
j. Thirty (30) images per second
k. Sixty (60) images per second
14. The Multi Channel Digital Video Recorder shall be available with either
four (4), nine (9), or sixteen (16) dry contact alarm inputs for using external
devices to signal the unit to react to events. An alarm input setup screen
shall enable the user to turn the input on or off, create a title for the input,
and independently program the input for Normally Open (NO) or Normally
Closed (NC).
15. The Multi Channel Digital Video Recorder shall include four (4) active low
open collector outputs for activating external devices such as buzzers or
lights. An alarm output setup screen shall enable the user to establish a
schedule and create a title for each output.
16. The Multi Channel Digital Video Recorder shall accept an external signal
to reset the units’ internal buzzer and the alarm out signal utilizing a dry
contact input.
17. The Multi Channel Digital Video Recorder shall include event recording,
triggered by alarm input conditions, motion detection, and video loss.
Each event shall be able to react differently, with an assigned schedule,
camera (or multiple cameras), recording speed, video quality, and dwell
time. Activation of an internal buzzer or external alarms shall also be
available, and the unit must be capable of notifying a remote site, or
dialing a pager with a numeric message, when certain events are
activated. The unit must also maintain a log of all events, with its
associated video available by a simply pressing a button. To ensure that
important video cannot be automatically overwritten, the event video must
be stored separately from time lapse video.
18. The Multi Channel Digital Video Recorder shall include pre event
recording to record images before an event occurs. The amount of time to
record prior to an event shall be adjustable from one (1) to three hundred
(300) seconds, with the recording speed and video quality also definable
per camera.
HRHD Plus series Digital Video Recorder
- 8 - HRHD4+, 9+, 16+
19. The Multi Channel Digital Video Recorder shall incorporate advanced
search capabilities to allow quick searching of its video database. The
following search parameters shall be standard:
a. Go to First: Displays the first recorded image.
b. Go to Last: Displays the last recorded image.
c. Date/Time Search: Searches by date and time.
d. Calendar Search: Searches using the calendar search screen
e. Event Search: Selects video from the event log.
20. The Multi Channel Digital Video Recorder must include a system log to
display a record of various system events logged by the unit. The events
shall be listed from most recent to the oldest. The log must include the
following:
a. The dates and times of when the system was turned on and off.
b. The dates and times of power failures.
c. The dates and times of when the recording was started or stopped.
d. The dates and times of when playback was started or stopped.
e. The dates and times of when setup changes were made.
f. The dates and times of when the data banks were cleared.
21. The Multi Channel Digital Video Recorder shall offer the choice of a
standard recording mode or a high recording mode. The DVR must
record up to sixty (60) images per second for NTSC (fifty (50) for PAL) and
view live video in standard mode. In high mode, the unit shall offer a
record rate of thirty (30) images per second NTSC (twenty five (25) for
PAL).
22. The Multi Channel Digital Video Recorder must allow for customization of
the recording parameters, with the ability to select both the recording
speed and picture quality for each of the camera inputs.
23. In order to customize the unit recording for a specific application, the Multi
Channel Digital Video Recorder shall include scheduled recording,
allowing the user to define recording start/stop times for each individual
camera, based upon time, day of the week, and user defined holidays.
The schedule can be set to activate alarm outputs, determine actions
upon alarms, determine actions upon motion detection, and determine
actions upon video loss. The unit must also have the ability to notify a
remote site upon an alarm, motion detection, or video loss event based
upon time, day of the week, and user defined holidays.
24. The Multi Channel Digital Video Recorder shall include a built in video
motion detector, with parameter adjustments programmable for each
camera input. A minimum of five (5) settings to adjust the unit’s sensitivity
HRHD Plus series Digital Video Recorder
- 9 - HRHD4+, 9+, 16+
to motion must be available. In order to adjust the size and area of an
object that will trigger a motion alarm, the user must have the ability to
adjust the minimum number of detection blocks that must be activated,
and/or define the area of an image (e.g. doorway, window, etc…) that will
trigger the alarm.
25. The Multi Channel Digital Video Recorder shall record and play back a
single channel of line level (amplified source) audio at a minimum of 6KB
per second. The unit must also have the ability to play live audio through
an attached speaker.
26. The Multi Channel Digital Video Recorder shall include a user friendly
graphical user interface (GUI) menu system to program system features
and search the video database. The GUI must have the following
standard languages:
a. English
b. Spanish
c. Italian
d. German
e. French
27. The Multi Channel Digital Video Recorder shall utilize two setup screens,
a quick setup and a normal setup.
a. The quick setup screen shall allow the operator to set up the following
most commonly used features of the unit:
1. Recording Speed
2. Recording Quality
3. Audio Recording On/Off
4. Sequence Dwell Time
5. System Information
6. Camera Setup
7. Network Setup
8. Password Setup
9. Date/Time Setup
b. The normal setup screen gives the operator access to all of the setup
screens in section A.24.a, and additional setup screens including, but
not necessarily limited to, the following:
1. System Log
2. System Check
3. Alarm In Setup
4. Motion Detection Setup
HRHD Plus series Digital Video Recorder
- 10 - HRHD4+, 9+, 16+
5. Alarm Out Setup
6. Audio Setup
7. RS232/RS485 Setup Screen
8. Record Mode Setup
9. Time Lapse Record Mode Setup
10. Time Lapse Recording Schedule Setup
11. Pre Event Recording Setup
12. Alarm In Event Action (Record) Setup
13. Alarm In Event Action (Alarm Out) Setup
14. Alarm In Event Action (Notify) Setup
15. Motion Detector Event Action (Record) Setup
16. Motion Detector Event Action (Alarm Out) Setup
17. Motion Detector Event Action (Notify) Setup
18. Video Loss Event Action (Record) Setup
19. Video Loss Event Action (Alarm Out) Setup
20. Video Loss Event Action (Notify) Setup
21. On Screen Display Setup
22. Sequence Display Setup
23. LAN Setup
24. Modem Setup
25. Callback Center (LAN) Setup
26. Callback Center (Modem) Setup
27. Configuration Setup
28. The Multi Channel Digital Video Recorder must utilize traditional V CR like
controls to provide the benefits of digital recording with minimal training.
The unit shall include intuitive front panel controls such as play/pause, fast
forward, rewind, record, menu, search, etc., and shall incorporate a jog
shuttle to allow video review using step by step or variable speed control.
29. The Multi Channel Digital Video Recorder shall include an RS232 port for
remote control/integration of the unit with third party systems. A setup
screen must be available to adjust the settings for baud rate, parity, data
bits, and stop bits. ASCII control codes must be readily available from the
manufacturer for control and programming of the Digital Video Recorder.
30. The Multi Channel Digital Video Recorder shall include an RS485 port
used for either remote control of the unit or PTZ dome camera control.
When the port is used for remote control, the unit shall allow control from
third party systems, such as VideoBloX matrix systems, access control
systems, or building management systems. A setup screen must be
available to adjust the settings for baud rate, parity, data bits, and stop
bits. When the port is used for PTZ dome camera control, PTZ control
from the front panel controls or through the remote software (including up
to sixteen (16) presets with names) must be available. The unit shall
control the following PTZ camera’s:
HRHD Plus series Digital Video Recorder
- 11 - HRHD4+, 9+, 16+
a. HONEYWELL Video RapidDome/RapidDome Gold
b. ADEMCO Video Orbiter Series
c. Ultrak UltraDome™ KD6
d. Honeywell HSD 25X
e. LG Honeywell GRO 1604
f. Pelco Spectra Dome Series
g. Pelco D protocol
h. Philips G3 Autodome
i. Sensormatic DeltaDome II/Ultra V
j. Panasonic WV CS850/854
k. Panasonic WJ SX 550A
l. Kalatel KTD 312
m. Samsung SPD 1600
n. Samsung Dome
o. Samsung Zoom
p. Samsung MRX1000
q. IDIS Irx 100
r. Hitron 2406
s. Hitron Fastrax 2
t. Sungjiin Receiver/MPU
u. Linlin PIH 717
v. Fine CCR 1660
w. Chilsung CRD J6416
31. For remote access through PSTN, LAN/WAN, DSL, and ISDN, the Multi
Channel Digital Video Recorder must include an internal 10/100 Base T
network interface card (NIC), and an RS232 port to connect an external
user supplied PSTN modem or ISDN terminal adapter.
32. The Multi Channel Digital Video Recorder shall utilize administrator and
user passwords to restrict access to certain functions. An administrator
password shall be required turn the system off, enter the setup screen,
load default setups, clear all data, and change the system date and time.
A user password shall be required to display the event log in live
monitoring mode, enter the search menu, enter playback mode, and start
and stop recording. The passwords must be composed of up to eight (8)
digits. The unit’s network setup administration and user passwords shall
be different than the DVR’s administration and user passwords. All factory
default passwords must be rendered useless when an administrator resets
a unique password.
33. The administrator of the Multi Channel Digital Video Recorder shall have
the ability to lock the front panel, causing a password screen to be
displayed any time a button on the front panel is pressed. The front panel
keys must remain locked until the correct password is entered.
HRHD Plus series Digital Video Recorder
- 12 - HRHD4+, 9+, 16+
34. Utilizing the Windows
®
based remote software package supplied with
every system, and with secure, password protected communications, the
software shall have the following capabilities:
a. View live video from one (1) or more sites.
b. View recorded video
c. Perform remote upgrades
d. Program the unit
e. Use the image enhancement tools (zoom, brightness, interpolate, blur,
and sharpen.
f. Alarm notification when connected to site.
g. Create video clip self-executable file with encryption.
h. Print images.
i. Extract bitmap (.bmp) images.
35. The user shall be able to access multiple DVR sites from virtually any
location using the internal network interface card (NIC), with the ability to
connect to up to sixteen (16) sites simultaneously, and up to sixteen (16)
images displayed on the screen at the same time.
36. Utilizing a system information screen, the operator shall have access to
the following system information:
a. Unit Model Number
b. Hardware Version Number
c. Software Version Number
d. Site Description
e. Unit ID
f. Language
g. Disk Usage
h. From/To Record Dates
37. The Multi Channel Digital Video Recorder must include the following
date/time options:
a. Selectable Time Zone
b. Daylight Saving Time Adjustment
c. Holiday Setup
d. A minimum of the following date formats:
1. MM DD YYYY
2. DD MM YYYY
3. YYYY MM DD
4. MM/DD/YYYY
5. DD/MM/YYYY
6. YYYY/MM/DD
HRHD Plus series Digital Video Recorder
- 13 - HRHD4+, 9+, 16+
e. 12 hour (AM/PM) or 24 hour time format
38. The Multi Channel Digital Video Recorder shall be able to display the date,
time, camera title, and status on screen. The operator shall have the
ability to turn each display on or off individually, and to adjust the left, right,
top, and bottom margins of the display.
39. The Multi Channel Digital Video Recorder must have the ability to
sequence the available video inputs either by sequencing through user
defined screen layouts, or by sequencing through all the cameras in the
bottom right window of a multi screen or picture in picture (PIP) format.
40. The Multi Channel Digital Video Recorder shall contain a factory reset
switch for use when the operator wants to return the units settings to the
original factory defaults.
41. The Multi Channel Digital Video Recorder shall be an Honeywell Video
Systems HRHD Series or equivalent.
2.03 MECHANICAL SPECIFICATIONS
A. The Multi Channel Digital Video Recorder must have the following mechanical
specifications:
1. Unit Dimensions (W x H x D).... …….16.9 in x 3.5 in x 15.9 in
(43.0 cm x 8.8 cm x 40.5 cm)
2. Shipping Dimensions (W x H x D)……21.3 in x 10.2 in x 19.7 in
(54 cm x 26 cm x 50cm)
3. Unit Weight ............................... …….17.98 lbs. (8.16 kg)
4. Shipping Weight.. .. .. ... .. .. ........... …….24.5 lbs. (11.1 kg)
A. The Multi Channel Digital Video Recorder shall include the following rear
panel connections:
1. Alarm Inputs.......................... 4, 9, 16 dry contact (model dependant),
NC/NO, programmable 4.3V
2. Alarm Output......................... 4 (open collector), 5mA@12V, 30mA@5V
3. Alarm Reset Input................. 1 dry contact, 4.3V
4. Audio Input............................ 1 “line in” – RCA
5. Audio Output.........................1 “line” output – RCA
6. Network Connectivity....... .. .. . 10/100 Mbps Ethernet, RJ45
7. RS232 Port........................... External modem connection or remote
control option
8. RS485 Port ........................... PTZ control or remote control option
9. USB Port............................... USB2.0
HRHD Plus series Digital Video Recorder
- 14 - HRHD4+, 9+, 16+
2.04 ELECTRICAL POWER REQUIREMENTS
A. The Multi Channel Digital Video Recorder must have the following electrical
specifications:
1. Power Requirement .............. 100 to 240 VAC, Max 90 Watts
2. Connection............................ IEC320
2.05 ENVIRONMENTAL CONDITIONS
A. The Multi Channel Digital Video Recorder shall be designed to meet the
following environmental conditions:
1. Operating Temperature......... 41° to 104° F (5° to 40° C)
2. Operating Humidity............... 0% to 90% (non condensing)
3. Emissions ............................. FCC: Part 15, Class A
CE: EN55022, 1998, Class A
4. Immunity............................... CE: EN50130 4, 1998, Alarm Standard
5. Safety.................................... UL: ULC60950
CE: EN60950
PART 3 – EXECUTION
3.01 EXAMINATION
A. Submission of a proposal confirms that the contract documents and site
conditions are accepted without qualifications unless exceptions are
specifically noted.
B. The site shall be visited on a regular basis to appraise ongoing progress of
other trades and contractors, make allowances for all ongoing work, and
coordinate the requirements of this contract in a timely manner.
C. The Multi Channel Digital Video Recorder must be inspected before
installation, and shall be free of any cosmetic defects or damage.
3.02 PREPARATION
A. Prior to installation, the Multi Channel Digital Video Recorder shall be
configured and tested in accordance with the manufacturer’s instructions.
3.03 INSTALLATION
A. The Multi Channel Digital Video Recorder must be installed, programmed,
and tested in accordance with the manufacturer’s instructions.
HRHD Plus series Digital Video Recorder
- 15 - HRHD4+, 9+, 16+
1. In order to ensure a complete, functional Multi Channel Digital Video
Recorder, for bidding purposes, where information is not available from
the Owner upon request, the worst-case condition shall be assumed.
2. Interfaces shall be coordinated with the Owner’s representative, where
appropriate.
3. All necessary backboxes, racks, connectors, supports, conduit, cable, and
wire must be furnished and installed to provide a complete and reliable
Multi Channel Digital Video Recorder installation. Exact location of all
boxes, conduit, and wiring runs shall be presented to the Owner for
approval in advance of any installation.
4. All conduit, cable, and wire shall be installed parallel and square with
building lines, including raised floor areas. Conduit fill shall not exceed
forty percent (40%). All wires shall be gathered and tied up to create an
orderly installation.
3.04 TESTING AND CERTIFICATION
A. The Contractor shall demonstrate the functionality of the Multi Channel Digital
Video Recorder upon completion of installation, documenting the result of all
tests and providing these results to the Owner. The Multi Channel Digital
Video Recorder shall be tested in accordance with the following:
1. The Contractor shall conduct a complete inspection and test of all installe d
Multi Channel Digital Video Recorder equipment. This includes testing
and verifying operation with connected equipment.
2. The Contractor shall provide staff to test all devices and all operational
features of the system for witness by the Owner’s representative and the
Authority Having jurisdiction. All testing must be witnessed by the
Owner’s representative, prior to acceptance.
3. The testing and certification shall take place as follows:
a. The Multi Channel Digital Video Recorder shall be tested in
conjunction with the manufacturer’s representative.
b. All deficiencies noted in the above test shall be corrected.
c. Test results shall be submitted to the consultant or Owner’s
representative.
d. The test and correction of any deficiencies shall be witnessed by the
owner’s representative, and note.
e. The Owner’s representative shall accept the system.
HRHD Plus series Digital Video Recorder
- 16 - HRHD4+, 9+, 16+
f. The system test shall be witnessed by the Authority Having
Jurisdiction. Any deficiencies noted during the testing must be
corrected.
4. A letter of certification shall be provided to indicate that the tests have
been performed, and all devices are operational.
END OF SECTION
HRHD Plus series Digital Video Recorder
- 1 - HRHD4+, 9+, 16+
Brief Specification
The Multi Channel Digital Video Recorder must utilize traditional VCR like
controls and shall be available with four (4), nine (9), or sixteen (16) auto
terminating BNC composite video inputs with corresponding BNC looping video
outputs, a BNC composite main video output, a BNC composite spot video
output, and an S VHS Mini Din video output to simultaneously show the same
video on individual monitors. The Multi Channel Digital Video Recorder shall
offer internal hard drive options of 80 Gigabytes, 160 Gigabytes, 320 Gigabytes,
or 500 Gigabytes with the ability to archive encrypted video to an external
Universal Serial Bus (USB) – Integrated Drive Electronics (IDE) hard drive or a
built in internal CD RW drive. The video shall be saved in a self-executable file
format that contains the video player and image enhancement tools, allowing the
user to play the clip in its original, unalterable format on any PC without the need
for additional reader software. The Multi Channel Digital Video Recorder’s
recorded images shall utilize advanced video encryption, with each image
containing a unique fingerprint that is chained with the preceding and succeeding
images (chained fingerprinting). This shall insure that the video images cannot
be modified with any available PC software, enabling a solid chain of evidence.
The Multi Channel Digital Video Recorder must utilize ML JPEG, an advanced
image compression technology that allows for extremely low data storage
requirements (for longer recording durations), high quality images, and faster
transmission speeds using less network bandwidth. The Multi Channel Digital
Video Recorder shall display high definition video with a minimum resolution of
720x480 (NTSC) or 720x576 (PAL), and shall record high definition video with a
resolution of either 336x244 or 672x244 (NTSC), or 336x272 or 672x272 (PAL).
The Multi Channel Digital Video Recorder shall include event recording, triggered
by alarm input conditions, motion detection, and video loss. Each event shall be
able to react differently, with an assigned schedule, camera (or multiple
cameras), recording speed, video quality, and dwell time. Activation of an
internal buzzer or external alarms shall also be available, and the unit must be
capable of notifying a remote site, or dialing a pager with a numeric message,
when certain events are activated. The unit must also maintain a log of all
events, with its associated video available by a simply pressing a button. To
ensure that important video cannot be automatically overwritten, the event video
must be stored separately from timelapse video. The unit shall also incorporate
advanced search capabilities to allow quick searching of its video database. The
Multi Channel Digital Video Recorder shall include a built in video motion
detector, with parameter adjustments programmable for each camera input. In
order to adjust the size and area of an object that will trigger a motion alarm, the
user must have the ability to adjust the minimum number of detection blocks that
must be activated, and/or define the area of an image (e.g. doorway, window,
etc.) that will trigger the alarm. The Multi Channel Digital Video Recorder shall
record and play back a single channel of line level (amplified source) audio, and
must include a user friendly graphical user interface (GUI) menu system to
HRHD Plus series Digital Video Recorder
- 2 - HRHD4+, 9+, 16+
program system features and search the video database. The Multi Channel
Digital Video Recorder shall include an RS485 port used for either remote control
of the unit or PTZ dome camera control. The user shall be able to access
multiple DVR sites from virtually any location using the internal network interface
card (NIC), with the ability to connect to up to sixteen (16) sites simultaneously,
and up to sixteen (16) images displayed on the screen at the same time. The
Multi Channel Digital Video Recorder shall be a Honeywell Video Systems HRHD
Plus Series or equivalent.
Loading...