Honeywell HREP4, HREP8 User Manual 2

HREP 4-, 8-, 16-Channel Color
JOG
SHUTTLE
Wheel
Function
Keys
Channels
Control
Keys
Playback Controls
A
BCD
E
F
G
H
I
Logon to the system after the startup diagnostics have completed after applying power.
The default USER name is ADMIN. Use the Channel Selection buttons to enter the default PASSWORD,
1234
, then click ENTER.
Logging On
LIVE Menu
MENU - Access to system or recording setup ARCH - Enter Backup menu SEARCH - Open SEARCH menu DISP - Change the display mode/Split mode. PTZ - Open PTZ control panel ZOOM - Activate LIVE ZOOM LOG - Open LIVE Log list with images. REC - Start Panic Recording mode.
Mouse Menu
FREEZE ON/OFF - Freeze LIVE
screen
PTZ - Turn On/Off PTZ mode
ZOOM - Start LIVE zoom
PLAYBACK - Start a quick search for
the selected channel (Choose from 10, 20, and 30 seconds ago or 1 minute ago)
PANIC REC START - Start/stop Panic Recording mode
Searching by Time
1. Click SEARCH on the LIVE screen.
2. Select SEARCH BY TIME.
3. Select a date on the calendar.
4. Select a timeline.
5. Select the playback mode: PANO (thumbnail-style playback) or PLAY (normal multi-channel playback).
DVR Quick Install Guide
Front Panel
CONTROL GROUP
Function Keys PTZ Selects PTZ mode in Live display.
Control Keys CHANNEL
BUTTON/ CONTROL
MENU Displays the SETUP menus.
SEARCH Displays the SEARCH menu.
DISPLAY Selects various display modes in Live display and playback
SELECTION BUTTONS
CURSOR KEY Used to navigate the various menus.
ENTER Apply or select an item.
RETURN Cancel, or return to the previous menu.
Used to display individual channels in Live display and playback. They are also used to enter numeric passwords for logon screens.
Rear Panel
GROUP CONNECTION DESCRIPTION
A Camera Inputs Connect up to 4/8/16 camera inputs, depending on your DVR.
B Monitor and Spot
Out
CAudio Inputs/
Outputs
D PAL/NTSC Switch Change the camera input type.
E Alarm Inputs/
Relay Outputs
F RS485 Connect PTZ cameras or a keyboard controller.
G LAN LAN connection to a router or an internal network.
H DVI DVI main monitor connection to a PC monitor or compatible
Connect the main BNC monitor and a BNC spot monitor.
Connect up to 4 audio inputs and one audio output.
Connect up to 4 alarm inputs and configure them as high or low inputs with common ground. Connect one alarm output and configure it as high or low output with common ground.
display.
Navigating the LIVE Screen
Using the LIVE Mode Mouse Popup Menu
Playback Control
Shuttle Wheel Used to quickly adjust playback speed and direction. Also
JOG When playback is paused, use JOG to move the footage
Document 800-07015 – Rev B – 09/10
used to control camera zoom when in PTZ mode and digital zoom in Live display mode.
forward or backward, frame by frame.
Increases reverse playback speed.
Selects reverse playback.
Pauses/resumes playback.
Selects forward playback.
Increases forward playback speed.
Note If you want to connect a VGA monitor, please use a
DVI-to-VGA converter (supplied with DVR).
I Power Connect to a 12V/5A adapter (supplied).
Searching
Getting Started
Playback Control
Playback Controls
A DISPLAY - change multi-view mode
BPlayback Controls
CBACKUP - start backup/archive to
external device
DRETURN - exit from playback mode
ETime indicator
A
B
C
D
E
Searching by Event
1. Select SEARCH BY EVENT.
2. Select search event categories for the search.
3. Set a search START/END time.
4. Click SEARCH.
5. Double-click an event in the search query results list to play that clip.
Archiving Searched Video
1. Click SEARCH on the LIVE screen.
2. Search for recorded video by either searching by Date/Time or searching by Event.
3. Select a starting point for playback, click Play to find the beginning of the clip you want to archive, then click Pause to pause playback.
4. Click to mark the beginning of the video you want to archive.
5. Enter a TAG name, select the cameras you want to archive, then click START. The display returns to playback.
6. Click Pause to pause playback, click
, then click STOP to mark the end of
the clip.
7. Click RESERVE, then click CLOSE.
8. Click to exit playback mode, then click CLOSE to exit the SEARCH menu.
9. Click on the main menu.
10. Click RESERVED DATA MANAGEMENT, select the clip by name in the AVI ARCHIVE LIST, then click BURN.
11. Select a DEVICE and a BURNING TYPE, then click START.
1. Click ARCH on the LIVE screen.
2. Select NEW ARCHIVE.
3. Set the START/END time for archiving.
4. Click QUERY.
5. Check the data size and select the device to which the data is saved (CD, DVD, or USB media).
6. Enter a TAG NAME to name the folder on the device.
7. Click BURN to burn the clip to the chosen media.
8. Select a DEVICE and a BURNING TYPE, then click START.
2
3
4
5
5
7
Changing the OSD Language
1. Click MENU.
2. Select SYSTEM SETUP.
3. Select DISPLAY.
4. Select OSD.
5. Select the desired language.
6. Click APPLY.
Configuring Recording Parameters
To change the recording configurations from the default settings, select RECORD SETUP, then make the desired changes. Refer to your HREP4, HREP8, HREP16 User Guide.
1. Select NETWORK on the MAIN menu.
2. Uncheck DHCP for static IP setting.
3. Enter the IP information that you get from your network administrator.
4. Check the service ports for WEB and RTSP (2 ports only).
5. Use AUTO PORT when your router supports UPNP.
6. Click AUTO PORT to see the connection address in the ALIAS field.
Note The default IP setting is DHCP, so you do not need to manually set the IP
address. Your router will assign the IP address automatically.
DDNS Settings
3
4
For information about configuring the DDNS settings, please refer to the DDNS Application note (document 800-07045).
2
For connecting through the internet, the 554 and 8080 ports should be set to Port Forwarding at the router.
1. Open Internet Explorer.
2. Enter the IP Address or the URL of your DVR into the IE Explorer Address bar:
http://XXX.XXX.XXX.XXX
http://XXX.XXX.XXX.XXX:PPPP} (if you are using another Web port) (PPPP = the assigned web port number)
3. Enter the Default ID (ADMIN) and password (1234), then click OK.
4. Allow ActiveX to download.
Note If you cannot download ActiveX, then go to the Security tab in IE and check all ActiveX
options.
5. Install ActiveX.
The LIVE view window opens.
In addition to LIVE view, users can access SEARCH and SETUP, depending on their User Authority privileges. Refer to your HREP4, HREP8, HREP16 User Guide for more information about User Authority.
Archiving Video from the LIVE Screen
System Setup
RECORD Menu Setup
Connecting through the Internet
© 2010 Honeywell International Inc. All rights reserved. No part of this publication may be reproduced by any means without written permission from Honeywell. The information in this publication is believed to be accurate in all respects. However, Honeywell cannot assume responsibility for any consequences resulting
Configuring the Network IP Settings
from the use thereof. The information contained herein is subject to change without notice. Revisions or new editions to this publication may be issued to incorporate such changes.
www.honeywellvideo.com
+1.800.796.CCTV (North America only)
HVSsupport@honeywell.com
Document 800-07015 – Rev B – 09/10
Loading...