Honeywell HB 05, HB 15 Mounting and Operation

Sun Module

HB 05 / HB 15

Mounting and Operation

Contents

Contents 1 Overview 2

For your information 2 Application 2 Scope of supply 4

Mounting 5

Safety instructions 5 Information on mounting the sun module 5 Information on mounting external sensors 6 Mounting the sun module 7 Inserting batteries 8 Mounting external sensors 9 Teach-in 12

Operation 16

Information for the fitter 16 Glossary 17 Technical data 18 Help for problems 19 Notes 21

Overview

For your information

Technical terms are identified by an * and are explained in the glossary.

Application

The Sun module HB 05/HB 15 is part of the Hometronic System*. It measures the brightness and temperature outside a building. The housing of the sun module contains:

• 1 sensor for measuring the brightness

• 1 sensor for measuring the temperature

The measuring data* are transferred by radio to the Hometronic Manager*. These data are used by the Hometronic Manager to control the shutters which are assigned to the sun module via the following functions:

• Opening the shutters at sunrise (SR)

• Sun protection (SP) in case of intensive sunshine and depending on

the outside temperature

• Closing the shutters at sunset (SS)

• Automatic brightness control (HA) for controlling the lamp

brightness via brightness values of the HB 05/HB 15 or controlling a device with the device switch HS 20 or HS 30.

Overview

• In the case of Version HB 15 with a connected vane anemometer*:

Opening or closing the shutters depending on the wind forces (wind protection*)

Use the wind sensor HWS 40 to control the awnings.

You can connect further external sensors to the sun module:

• A temperature sensor to the HB 05 (alternatively to the temperature

sensor in the housing)

• A temperature sensor and a vane anemometer to the HB 15

Overview

Scope of supply

(1) Sun module (2) Mounting bracket (3) 2 batteries 1.5 V, type LR 06

(mignon)

Additionally in the Sun module HB 15 scope of suppl

(4) Connection cable (HCV 23) (5) Vane anemometer

Mounting

Safety instructions

The sun module has a radio transmitter whose function

can be impaired by metallic objects or radio devices.

Caution!

► When selecting the mounting site, ensure that there is

sufficient distance to metallic objects and radio devices.

► Select a different mounting site if radio interference

occurs.

The brightness and temperature sensors in the inside of

the module have been adapted to the housing state.

Caution!

Information on mounting the sun module

When selecting the mounting site, ensure that ...

• the sun module is easily accessible for the teach in* and the battery

change

• the brightness situation at the building is determined unimpaired as

far as possible

► Do not coat the housing. ► Avoid rough damage to the housing.

Mounting

If you only install one sun module, select the mounting site in accordance with its main application: Your Hometronic Manager uses the measured data to control e.g. the position of the shutters at sunrise or sunset. For measured data ...

• at sunrise: Align the sun module to face East

• at sunset: Align the sun module to face West

• for the whole day: Align the sun module to face South

Information on mounting external sensors

In order to connect external sensors you require:

(1), (2) Cable from the distribution box to the external sensors (3) Damp-proof distribution box (4) Connection cable (HCV 23) to the sun module

+ 16 hidden pages