Home
Installation guide
evohome Security
INDEX
Mandatory steps to follow before beginning your installation
Panel Identification
STEP 1: Connecting the evohome security hub
STEP 2: Creating your TCC account on web porta
Installing your system
1. Create your security account
2. Registering the accessories to your system
2.1. Registering the Contactless Tag Reader (SPRS8EZS)
2.2. Registering the Contactless Tags
2.3. Registering the remote control keyfob (TCC800MS)
2.4. Registering the door window sensor (DO8EZS)
2.5. Registering the pet-immune motion sensor (IRPI8EZS)
2.6. Registering other peripherals
2.7. Finalizing the installation of accessories
3. SMS Activation code registration
4. Registering additional alert contacts
5. iOS/Android App
4
3
3
3
6
7
14
15
17
18
19
20
21
21
22
23
24
evohome security hub pre-configured parameters
25
MANDATORY STEPS TO FOLLOW BEFORE
BEGINNING YOUR INSTALLATION
At this stage of the installation process, do NOT power up or remove the battery isolation tab
from any of the accessories supplied with your kit or additionally purchased. This should only be
done in the “Security Equipment Registration” page of your account following the setup of both
your Total Comfort Connect ( TCC) account and Security account as explained step by step in this
manual.
If any accessories are power up prior to entering the “Security Equipment Registration” page
then the batteries from those accessories will need to be removed and inserted again in order
to successfully register them to your system. This is explained in the installation guide supplied
with that accessory.
Panel Identification
Wireless hub
Wireless hub with GPRS
3
STEP 1:
CONNECTING EVOHOME SECURITY HUB
Wireless hub
Wireless hub with GPRS
At first installation, the evohome security hub will update automatically with the latest version of
firmware. This phase generally lasts 10 min but can last up to 20 min. During this time, all LEDs
are turned off.
4
STEP 2: CREATING YOUR TOTAL CONNECT
COMFORT (TCC) ACCOUNT ON WEB PORTAL
1. Logon to the website https://international.mytotalconnectcomfort.com/
Select “CREATE AN ACCOUNT” to create your account. If you already have an existing TCC
online account then login to your account and go straight to Step 2 on page6 :
2. Complete all registration details below for your ‘Total Comfort Account’ (TCC) account:
Note:
Record the “email address” and “password”
for your TCC online account as these will be
required for login to your account
5
STEP 2: CREATING YOUR TOTAL CONNECT
COMFORT (TCC) ACCOUNT ON WEB PORTAL
3. Go to your inbox and open the confirmation email. Remember to check junk mail if not
received by the priority inbox.
You must select the activation link in this email to activate your account
A message below will appear confirming successful
Now refer to the next section for installing your system
6
INSTALLING YOUR SYSTEM
INSTALLING YOUR SYSTEM
1. Create your security account:
Step1 . Enter your TCC login details at: https://international.mytotalconnectcomfort.com/
Step2 . As a new user, you can now add a location for your evohome hub security system
within your TCC account.
If you are an existing user, you can select an existing location or add a new location :
New user Existing TCC users
Example above for existing location is “Office”
7
INSTALLING YOUR SYSTEM
Step3 . Complete all registration details below for the location of your system if setting up a
new location.
If an existing location is selected then select “+Add System“:
New location Existing location selected
Step4 . Select “Security System”
8
Loading...