Honeywell DOLPHIN CT50 NON-INCENDIVE Quick Start Manual

Dolphin™ CT50 Non-Incendive

with Windows® 10 IoT Mobile Enterprise

Quick Start Guide

*CT50NI-W10-EN-QS*

CT50NI-W10-EN-QS Rev A
1/17

Introduction

This document is for the Dolphin CT50 NI. This is the non-incendive version
of the Dolphin CT50. The Dolphin CT50 NI can be identified by the yellow
scan buttons and a device label verifying non-incendive certification.

Warning: Explosion Hazard - Substitution of components may impair
suitability for Division 2 Class I, II, III locations.

Avertissement: Risque d’explosion - Le remplacement de composants
risque de compromettre l’adaptation du produit aux sites de division 2
catégorie I, II, III.

Out of the Box

Make sure that your shipping box contains these items:

• Dolphin CT50 NI mobile computer (Models CT50L0N, CT50LFN)

• Rechargeable 3.6 VDC Li-ion battery

• Quick start guide and other compliance documents

If you ordered accessories for your mobile computer, verify that they are also
included with the order. Be sure to keep the original packaging in case you
need to return the mobile computer for service.

Memory Card Specifications

Honeywell recommends the use of Single Level Cell (SLC) industrial grade
microSD™ or microSDHC™ memory cards with Dolphin mobile computers
for maximum performance and durability. Contact a Honeywell sales
representative for additional information on qualified memory card options.

Accessories for the Dolphin CT50 NI

These accessories are available for the CT50:

• HomeBase (Model CT50-HB)

• Ethernet HomeBase (Model CT50-EB)

• ChargeBase (Model CT50-CB)

• NetBase (Model CT50-NB)

• Quad Battery Charger (Model CT50-QBC)

• Vehicle Power Adapter (Model CT50-MC)

• Vehicle Dock (Model CT50-MB)

• USB Adapter (Model CT50-USB)

• Scan Handle

• Holster

Front Features

Speaker

Scan buttons

Power

button

Good Read LED

Battery status /
Notification LED

Volume buttons

Touch panel

Navigation panel

Microphone

Back Features

Camera lens

microSIM and microSD door

Camera
button

Battery door
latch

Battery

Install a microSIM Card

Install a microSD Card

Note: Format the microSD card before initial use.

Install the Battery

The Dolphin CT50 NI mobile computers ship with a Li-ion 3.6 VDC, 14.6
watt-hour battery manufactured for Honeywell International Inc.

32

Charge the Computer

Warning: Explosion Hazard - Batteries must only be changed or

charged in an area known to be non-hazardous. Use ONLY Honeywell
CT50 NI battery part number 318-055-003.

Risque d’explosion - Les batteries doivent uniquement être
remplacées ou rechargées dans un endroit non dangereux. Utilisez
UNIQUEMENT Honeywell CT50NI batterie P/N 318-055-003.

The Dolphin CT50 NI mobile computer ships with a partially charged battery.
Charge the battery with a CT50 charging device for a minimum of 4 hours.
Using the computer while charging the battery increases the time required to
reach a full charge.

Caution: We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power adapters
may cause damage not covered by the warranty.

Mise en garde : Il est recommandé d'utiliser les périphériques, les
cordons d'alimentation et les adaptateurs secteur conçus par
Honeywell. L'utilisation de tout périphérique, cordon d'alimentation ou
adaptateur secteur d'une autre marque est susceptible de provoquer
des dommages non couverts par la garantie.

The Dolphin CT50 NI mobile computers are designed for use with the
following charging accessories: HomeBase, Ethernet HomeBase,
ChargeBase, NetBase, Quad Battery Charger, Vehicle Power Adapter,
Vehicle Dock, and USB Adapter.

Caution: Make sure that all components are dry prior to using the
computers and batteries with accessories. Using wet components may
cause damage not covered by the warranty.

Mise en garde : Assurez-vous que tous les composants sont secs avant
de connecter les terminaux/batteries à des périphériques. L'insertion de
composants humides risque de provoquer des dommages non couverts
par la garantie.

Set Up the Computer for the First Time

1. Press the Power button.

2. Select your language and then touch Next.

3. Select your region and then touch Next.

4. Touch Cancel to skip the advanced provisioning options.

5. Follow the onscreen prompts to finish setting up the computer. To learn
more about what you can do with a Microsoft® account, go to

https://account.microsoft.com/about.

Turn the Power On or Off

To turn the computer on:

• Press and release the Power button.

To turn the computer off:

1. Press and hold the Power button until “slide down to power off” appears
on the screen.

2. Slide the screen down until the image disappears and “Goodbye”
appears on the screen.

Note: You should always power off the computer before removing the
battery.

About the Start Screen

Status bar

Start screen

Navigation and Function Buttons

Buttons Description Function

Back Return to the previous screen.

Home Return to the Start screen.

Search Start a search on the computer or the Internet.

Note: Additional

Volume

functionality varies according to the application in use.

Raise or lower the volume of the active
speaker.

Wake the Computer from Sleep Mode

Sleep mode automatically turns the touch panel display off and locks the
computer to save battery power when the computer is inactive for a
programmed period of time.

1. Press and release the Power button to wake the computer.

2. Swipe up from the bottom of the screen to unlock the computer.

Adjust the Screen Time Out Setting

You can adjust the amount of time before the screen times out after inactivity.

1. Scroll to the bottom of the screen and touch All apps.

2. Scroll down to Settings.

3. Touch Personalization and then Lock screen.

4. Scroll down to Screen times out after setting and select an amount of
time from the drop-down list.

5. Touch the Home icon to return to the Home screen.

Turn Airplane Mode On or Off

1. Swipe down from the top of the display to open the quick settings.

2. Touch Expand.

3. Touch Airplane mode to turn it on or off.

Note: When

Airplane Mode is turned on, appears on the status bar.

Scan a Bar Code with the ScanDemo

Note: For optimum performance, avoid reflections by scanning the bar code

at a slight angle.

1. Scroll to the bottom of the screen and touch All apps.

2. Scroll down to ScanDemoW10.

3. Point the computer at the bar code.

4. Touch Scan on the touch screen or press and hold a Scan button.
Center the aiming beam over the bar code.

The decode results appear on the screen.

Take a Photo or Video

1. Press the Camera button.

2. Select either single photo mode or video mode in the
viewfinder.

3. Point the camera lens at the object you want to capture. The camera lens
is located on the back of the computer.

4. Touch the single photo icon to capture a single photo.
Touch the video icon to start recording video. Touch the video icon
again to stop recording.

5. To view the captured photo or video, touch the preview circle in the upper
right corner.

Restart the Computer

You may need to restart the computer to correct conditions where an

application stops responding to the system or the computer seems to be
locked up.

1. Press and hold the Power button until “slide down to power off” appears
on the screen.

2. Slide the window down to the bottom of the screen. “Goodbye” appears
on the screen before the computer turns off.

To restart the computer if the touch panel display is unresponsive:

• Press and hold the Power + Volume Down buttons for approximately 13

seconds until the computer restarts.

Note: If you try to restart the computer and still experience issues, you may
need to see the user guide for information on how to perform a Factory Reset
(Clean Boot).

Support

To search our knowledge base for a solution or log into the Technical Suppor t
portal and report a problem, go to www.hsmcontactsupport.com.

User Documentation

For the user guide and other documentation, go to www.honeywellaidc.com.

Limited Warranty

For warranty information, go to www.honeywellaidc.com and click

Resources > Warranty.

Patents

For patent information, see www.hsmpats.com.

Trademarks

Microsoft and Windows are registered trademarks of Microsoft Corporation
in the United States and/or other countries.

Disclaimer

Honeywell International Inc. (“HII”) reserves the right to make changes in
specifications and other information contained in this document without prior
notice, and the reader should in all cases consult HII to determine whether
any such changes have been made. The information in this publication does
not represent a commitment on the part of HII.

HII shall not be liable for technical or editorial errors or omissions contained
herein; nor for incidental or consequential damages resulting from the
furnishing, performance, or use of this material. HII disclaims all
responsibility for the selection and use of software and/or hardware to
achieve intended results.

This document contains proprietary information that is protected by
copyright. All rights are reserved. No part of this document may be
photocopied, reproduced, or translated into another language without the
prior written consent of HII.

Copyright © 2017 Honeywell International Inc. All rights reserved.