Dolphin™ CT40 Display Dock
Model CT40-DB
User Guide
Disclaimer
Honeywell International Inc. (“HII”) reserves the right to make changes in specifications and other information contained in
this document without prior notice, and the reader should in all cases consult HII to determine whether any such changes
have been made. The information in this publication does not represent a commitment on the part of HII.
HII shall not be liable for technical or editorial errors or omissions contained herein; nor for incidental or consequential
damages resulting from the furnishing, performance, or use of this material. HII disclaims all responsibility for the selection and use of software and/or hardware to achieve intended results.
This document contains proprietary information that is protected by copyright. All rights are reserved. No part of this document may be photocopied, reproduced, or translated into another language without the prior written consent of HII.
Copyright 2018-2019 Honeywell International Inc. All rights reserved.
Web Address:
www.honeywellaidc.com
Trademarks
Android is a trademark of Google LLC.
DisplayLink is a registered trademark of DisplayLink (UK) Limited.
Other product names or marks mentioned in this document may be trademarks or registered trademarks of other companies and are the property of their respective owners.
Patents
For patent information, refer to www.hsmpats.com.
TABLE OF CONTENTS
Customer Support ........................................................................................................................ iii
Technical Assistance ............................................................................................................. iii
Product Service and Repair ................................................................................................ iii
Limited Warranty .................................................................................................................... iii
Chapter 1 - About the Display Dock ..............................................................1
About the Dolphin CT40 Display Dock ..................................................................................1
Out of the Box............................................................................................................................ 1
Features of the Dock............................................................................................................... 1
About the Dock Status LED ................................................................................................. 2
About the Dock Connectors .......................................................................................................2
Connect to Power..................................................................................................................... 2
Connect to Monitor................................................................................................................. 2
Connect to an Ethernet Network ....................................................................................... 3
Connect to an USB Device ...................................................................................................3
Chapter 2 - Use the Display Dock................................................................... 5
Check Software on Computer ................................................................................................... 5
Install DisplayLink Software ...................................................................................................... 5
Download the APK................................................................................................................... 5
Install the Software ................................................................................................................. 6
Insert CT40 Computer into the Dock ..................................................................................... 6
Chapter 3 - Configure the Display App......................................................... 9
How to Configure the Display Dock Settings...................................................................... 9
Dolphin CT40 Display Dock i
Start the Display Dock Settings App.................................................................................9
Set Display Dock Settings.....................................................................................................9
Set Screen Settings...........................................................................................................9
Set Peripheral Settings................................................................................................. 10
Appendix A - Specifications.......................................................................... 11
Label Locations............................................................................................................................11
Connected Devices and Specifications ..............................................................................11
Monitor Connections...........................................................................................................11
Supported Devices .........................................................................................................11
Non-Supported Devices...............................................................................................11
USB Devices ............................................................................................................................12
Supported Devices .........................................................................................................12
Non-Supported Devices...............................................................................................12
Power Supply Specifications...................................................................................................12
Clean the Dock..............................................................................................................................12
Mount the Display Dock............................................................................................................ 12
ii Dolphin CT40 Display Dock
Customer Support
Technical Assistance
To search our knowledge base for a solution or to log in to the Technical Support
portal and report a problem, go to www.hsmcontactsupport.com.
For our latest contact information, see www.honeywellaidc.com/locations.
Product Service and Repair
Honeywell International Inc. provides service for all of its products through service
centers throughout the world. To obtain warranty or non-warranty service, return
your product to Honeywell (postage paid) with a copy of the dated purchase
record. To learn more, go to www.honeywellaidc.com and select Service & Repair at
the bottom of the page.
Limited Warranty
For warranty information, go to www.honeywellaidc.com and click Get Resources >
Product Warranty.
Dolphin CT40 Display Dock iii
iv Dolphin CT40 Display Dock
CHAPTER
1
ABOUT THE DISPLAY DOCK
This chapter introduces the Dolphin™ CT40 Display Dock. Use this chapter to learn
about the basic dock features and how to connect to the dock.
Note: For more information on the Dolphin CT40 Mobile Computer, go to
www.honeywellaidc.com.
About the Dolphin CT40 Display Dock
The Display Dock allows the CT40 to become a personal computer. A monitor, keyboard, mouse, and audio can be connected through the dock via the USB ports.
The dock also provides an Ethernet connection.
Out of the Box
Make sure that your shipping box contains these items:
• CT40 Display Dock (CT40-DB)
•Power adapter
•Power cord
• Regulatory Sheet
If any of these items are missing or appear damaged, contact Customer Support.
Keep the original packaging in the event that you need to return the Display Dock
for service or if you want to store the charger when not in use.
Caution: We recommend the use of Honeywell accessories and power
adapters. Use of any non-Honeywell accessories or power
adapters may cause damage not covered by the warranty.
Features of the Dock
Dolphin CT40 Display Dock 1
Note: The dock supports USB direct connections only. The dock does not support USB hub
HDMI LED
USB Ports
(See Note)
USB Port
(See Note)
DC
Power
Jack
Ethernet
Port
HDMI
Port
connections, including keyboards with USB port(s).
About the Dock Status LED
Status Description
Constant Green The dock is connected through HDMI.
Off The dock is not connected or lost connection through HDMI.
About the Dock Connectors
Warning: Ensure all components are dry prior to mating terminals/
batteries with peripheral devices. Mating wet components may
cause damage not covered by the warranty.
Connect to Power
1. Plug the power cord into the power supply.
2. Plug the power supply cable into the power jack on the back of the dock.
3. Plug the power cord into a standard wall outlet.
Connect to Monitor
Note: See Monitor Connections for a list of approved connections.
1. Plug the HDMI cable into the dock.
2. Plug the other end of the HDMI cable into the monitor.
2 Dolphin CT40 Display Dock
Connect to an Ethernet Network
1. Plug the Ethernet cable into the dock.
2. Place the CT40 computer in the dock.
Note: For advanced Ethernet settings, go to www.honeywellaidc.com for the Dolphin CT40
User Guide.
Connect to an USB Device
Note: See USB Devices for a list of approved USB devices.
Note: The dock supports USB direct connections only. The dock does not support USB hub
connections, including keyboards with USB port(s).
Plug the USB type A cable into a USB port on the dock.
Dolphin CT40 Display Dock 3
4 Dolphin CT40 Display Dock
CHAPTER
2
USE THE DISPLAY DOCK
Use this chapter to verify and install DispalyLink software on the computer and use
the Display Dock.
Check Software on Computer
Before using the Display Dock ensure your computer is running the DisplayLink
software.
• If your CT40 computer is powered by Android 8 or higher, your computer has the
DisplayLink software installed by Honeywell.
• If your CT40 computer is powered by Android 7 or lower, you will need to install
the DisplayLink software.
Install DisplayLink Software
There are two ways to download the DisplayLink software to the computer:
• Download the DisplayLink Presenter app from Google Play.
• Download the DisplayLink Presenter APK provided by Honeywell.
Download the APK
To download the D isplayLink Presenter:
1. Go to www.honeywellaidc.com.
2. Select Get Resources > Software.
3. Click on the Technical Support Downloads Portal link,
https://hsmftp.honeywell.com.
4. Create an account if you have not already created one. You must login to
download the software.
Dolphin CT40 Display Dock 5
5. Install the Honeywell Download Manager tool on your workstation (e.g. laptop
or desktop computer) prior to trying to download any files.
6. Navigate to the software. Click on Software > Computer Devices > Handheld >
Dolphin CT40 > Current > CT40 Display Dock.
7. Select Download next to the software zip file.
Install the Software
Note: The Dolphin CT40 must have power for the entire length of the install process or it
could become unstable. Do not attempt to remove the battery during the process.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Provisioning mode under Honeywell settings.
3. Tap the toggle button to turn Provisioning mode On.
4. Connect the CT40 to your workstation.
5. On the CT40, swipe down from the top of the screen to see the notifications.
6. Tap USB charging this device.
7. Select Transfer files.
8. Open the browser on your workstation.
9. Save the DisplayLink Presenter file (*.apk), version 2.3.0 or higher, in one of the
following folders on the CT40 mobile computer:
• Internal shared storage\honywell\autoinstall
Files saved to this folder for installation, do not persist when a Full factory
reset or Enterprise data reset is performed.
• IPSM card\honeywell\autoinstall
Files saved to this folder for installation, do not persist when a Full factory
reset is preformed. However, the software does persist if an Enterprise data
reset is performed.
10. Swipe up from the bottom of the Home screen to access all apps.
11. Tap AutoInstall Settings and verify AutoInstall is enabled.
12. Tap Packages Upgrade from the AutoInstall Settings screen. The computer will
initiate a reboot and installs the software. When the install is finished, the lock
screen appears.
13. Once installation is complete, turn Provisioning mode Off.
Insert CT40 Computer into the Dock
Ensure the computer is fully seated into the dock.
6 Dolphin CT40 Display Dock
The first time you insert the computer into the dock, prompts appear on the screen.
Follow the prompts on the screen to:
• Set default for DisplayLink Presenter to open when the USB device is connected.
• Start capturing everything that is displayed on your screen.
Note: These prompts no longer appear when you insert the CT40 into the dock, unless you
left “Don’t show again” unchecked.
The computer will automatically change to landscape and the resolution will
update to the monitor settings.
Dolphin CT40 Display Dock 7
8 Dolphin CT40 Display Dock
CHAPTER
3
CONFIGURE THE DISPLAY APP
Use this chapter to learn how to configure the Display Dock settings through the
Dolphin CT40 mobile computer.
How to Configure the Display Dock Settings
You can configure the parameters on the computer for the Display Dock using the
Display Dock Settings app.
Start the Display Dock Settings App
The Display Dock Settings app is available from the all apps menu under Settings.
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display Dock settings under Honeywell settings.
Set Display Dock Settings
Set Screen Settings
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display Dock settings under Honeywell settings.
3. Choose one of the following options to set the view:
• To have the computer stay in portrait view, tap the system portrait screen
setting.
•Tap system landscape screen, to have the computer stay in landscape view.
4. To set the system resolution, tap resolution and choose one of the following
options:
• 1080 x 1920
• 720 x 1280
Dolphin CT40 Display Dock 9
• 540 x 960
5. To set the density, tap density and chose one of the following options:
• 160
• 240
• 320
• 400
Set Peripheral Settings
1. Swipe up from the bottom of the Home screen to access all apps.
2. Tap Settings > Display Dock settings under Honeywell settings.
3. To set the right mouse button to the back key, tap right mouse button to toggle
the feature on or off.
4. To change the phone audio through the computer, tap change audio to toggle
the feature on or off.
10 Dolphin CT40 Display Dock
APPENDIX
A
SPECIFICATIONS
Label Locations
Labels under the dock contain information about the dock including, compliance
information, model number, and serial number.
Connected Devices and Specifications
Monitor Connections
Supported Devices
• HDMI versions 1.4 and above
• VGA - supported through HDMI/VGA converter
• DVI - supported through HDMI/DVI converter
Non-Supported Devices
• HDMI splitter for two monitors
Dolphin CT40 Display Dock 11
•Display Port
USB Devices
Supported Devices
• Standard three button mouse with scroll
• Standard QWERTY keyboard without HUB/USB type A ports on the keyboard
• USB headset/USB to 3.5mm audio converter
• USB mass storage devices (thumb drives), not recommended for large transfers
(over 1GB)
Non-Supported Devices
•USB Hubs
• USB devices with additional USB type A ports
Power Supply Specifications
Note: Use only UL Listed power supply which has been qualified by Honeywell.
Output Rating 12 VDC, 3A
Input Rating 100-240 VAC, 50/60 Hz
Operating Temperature -10°C to 50°C (14°F to 122°F)
Max Terminal Input 5VDC, 2A
Clean the Dock
You may need to clean the dock to keep the dock in good working order. Clean the
dock as often as needed for the environment in which you are using the dock with a
dry soft cloth:
Mount the Display Dock
You can mount the dock on a flat, horizontal surface such as a desktop or workbench with an optional DIN rail.
Mouthing hardware required:
•DIN rail
• 3/16-inch diameter x 5/8-inch long pan head screw
• 1/2-inch OD x 7/32-inch ID x 3/64-inch thick washer
• 3/16-inch diameter nut
12 Dolphin CT40 Display Dock
1. Slide the DIN rail into the slot on the bottom of the dock.
2. Secure the DIN rail to the flat surface with the hardware.
Dolphin CT40 Display Dock 13
14 Dolphin CT40 Display Dock
™
Honeywell
9680 Old Bailes Road
Fort Mill, SC 29707
www.honeywellaidc.com
CT40-DB-EN-UG Rev A
02/19
Loading...