Page 1
1 69-1400–1
Deluxe
Programmable
Thermostat
69-1400-1
Page 2
2 69-1400–1
FEATURES
• Program up to four time periods and temperature setpoints
for each daily schedule.
• Set different schedules for each day of the week.
• Backlit for easy readability of display when a key is pressed.
• Press Information i key for present setting information and
outdoor temperature (select models).
• Select fan operation for each period of each day (select
models with fan key).
•Temporarily set the temperature warmer or cooler.
•Daylight Time key for easy switching in and out of Daylight
Savings Time.
• Program end of Hold (1 to 255 days) for added comfort and
energy savings.
• Copy key for easier programming.
Page 3
3 69-1400–1
PROGRAMMING
The keyboard is located behind the thermostat cover with three
frequently used keys by the display. The thermostat display
shows day, time, program period, temperature, system and fan
operation selection.
The thermostat can be set for four times and up
to eight temperatures for each day of the week
(28 independent time and 56 temperature settings).
The
▲
and ▼ keys provide quick temporary temperature changes to increase your comfort. The Hold Temp
key provides energy efficient operation for extended
periods of time.
Before starting the programming procedure, you can use the
following charts to organize your program schedule. The factory
preprogrammed time, temperature and fan settings are shown
in brackets. If you choose not to program a daytime energy
savings period, press the period key (Leave or Return) until the
time is blank. The fan setting feature is available on select
thermostat models.
Page 4
4 69-1400–1
Period Start Time Heat Setpoint
Monday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Tuesday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Wednesday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Thursday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Friday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Page 5
5 69-1400–1
Cool Setpoint Fan Setting
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
Page 6
6 69-1400–1
Period Start Time Heat Setpoint
Saturday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Sunday
Wake [6:00 AM] [70°F (21°C)]
Leave [8:00 AM] [62°F (16.5°C)]
Return [6:00 PM] [70°F (21°C)]
Sleep [10:00 PM] [62°F (16.5°C)]
Setting the Current Day and Time
IMPORTANT
Always press the keys with your fingertip or similar
blunt tool. Sharp instruments like pens and pencil
points can damage the keyboard.
Press Set Current Day/Time.
NOTE: On initial power up or after an extended power
loss, 1:00 pm flashes on the display until a key
is pressed.
M14619
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Day/Time
Mon
PM
Page 7
7 69-1400–1
Cool Setpoint Fan Setting
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
[78°F (25.5°C)] [Auto]
[85°F (29.5°C)] [Auto]
[78°F (25.5°C)] [Auto]
[82°F (28°C)] [Auto]
Press Day until the current day is displayed.
NOTE: Sun = Sunday, Mon = Monday, Tue = Tuesday,
Wed = Wednesday, Thu = Thursday, Fri = Friday,
Sat = Saturday.
Press Time ▲▲ or Time ▼▼ until the current time is
displayed.
NOTE: Tapping the Set Current Day/Time will change
the time in one hour increments.
M14620
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Day/Time
PM
Tue
M14621
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Time
Heat/Cool
Settings
Daylight
Time
Copy
Set Day/Time
AM
Tue
Page 8
8 69-1400–1
NOTE: If the current time is Daylight Savings Time,
press Daylight Time until DST is displayed.
Press Run Program.
Programming the First Day
Start by programming the Wake time and temperature (and fan
operation on select models) for any one day:
Press Wake.
Press Day until the desired day is displayed.
M14622
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Daylight
Time
Copy
Set Day/Time
AM
DST
Tue
M14623
Time Set Program
System Fan
Run
Program
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Wake
Room
System
Fan
Heat
Auto
AM
DST
Tue
M14635
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Wake
System
Fan
Heat
Auto
AM
Heat
Tue
Setting
M14636
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
Page 9
9 69-1400–1
Press Time ▲ ▲ or Time ▼ ▼ until the desired Wake time is
displayed.
NOTE: The program times are in fifteen minute
intervals. (Example: 8:00, 8:15, 8:30).
Press increase ▲ or decrease ▼ key until the desired
Wake temperature is displayed.
NOTE: The setpoint temperature range is 40 to 90°F
(7 to 31°C) for heating and 45 to 99°F (9 to
37°C) for cooling.
NOTE: Press Fan to modify fan operation. Auto means
the fan will run only when the heating or cooling
equipment is operating. On means the fan will
run continuously for the entire period.
Press Heat/Cool Settings to switch to other system
temperature setpoint.
NOTE: The program times are the same for both
heating and cooling.
M14637
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Time
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14638
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14639
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
Page 10
10 69-1400–1
Press increase ▲ or decrease ▼ key until the desired
temperature setpoint is displayed.
Press Leave, Return or Sleep and repeat steps , ,
and for programming the rest of the day. The first day
is now programmed.
IMPORTANT
Repeat steps
through for each day of the week
that has a different program than the first day. Refer
to Copying a Day section to copy any program day
to another.
Press Run Program when all days are programmed.
Copying a Day
NOTE: The thermostat must be in the program mode to use
the copy feature. Go to step if the thermostat is
already in the program mode.
Press Wake.
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
M14640
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Cool
Setting
M14641
Time Set Program
System Fan
Run
Program
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Wake
Room
System
Fan
Heat
Auto
AM
DST
Tue
M14642
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Wake
System
Fan
Em Heat
Auto
AM
Heat
Tue
Setting
Page 11
11 69-1400–1
Press Day to select the day to be copied if different from
the day displayed.
Press Copy.
Press Day until the day to be copied to is displayed.
Press Copy.
NOTE: donE will be displayed for two seconds and
then the normal program display will be shown.
Repeat steps through for all the days desired.
Press Run Program.
M14643
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Wake
System
Fan
Heat
Auto
AM
Heat
Setting
M14644
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Copy
Mon
M14645
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Mon Wed
M14646
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Copy
Page 12
12 69-1400–1
Clearing Program Period
NOTE: The thermostat must be in the program mode to use
the clear feature. Go to step if the thermostat is
already in the program mode.
Press Wake, Leave, Return or Sleep.
Press Day until the desired day is displayed.
Press Leave, Return or Sleep until the start time and
temperature setting are cleared (approximately 3 seconds).
NOTE: Wake cannot be cleared.
Repeat steps and for all the periods to be cleared.
Press Run Program.
M14647
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Mon
Leave
System
Fan
Heat
On
AM
Heat
Setting
M14648
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Day
Heat/Cool
Settings
Daylight
Time
Copy
Set Program
Leave
System
Fan
Heat
On
AM
Heat
Sat
Setting
M14649
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Leave
Set Program
Leave
Heat
Sat
Setting
Page 13
13 69-1400–1
Operating the Deluxe
Programmable Thermostat
Setting Temporary Temperatures
Changing Temperature Setting Until the Next Program Period
Press increase ▲ or decrease ▼ key until the desired tem-
perature setpoint is displayed.
NOTE: If ▼ or ▲ appear under the temperature display, it
means that both the heating and cooling setpoints are
being adjusted. Tapping the key will change both the
heat and cool setpoints by one degree. Press i after
the desired setpoint is reached to check the setpoints.
NOTE: The temporary temperature setting is displayed for
approximately 3 seconds. The setting is cancelled
when the next period starts or when Run Program
is pressed.
Changing Temperature Setting Indefinitely
Press Hold Temp.
Press increase ▲ or decrease ▼ key to change the
setting, if desired.
M14651
Time Set Program
System Fan
Run
Program
Hold Temp
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
System
Fan
Heat
Auto
Heat
Setting
M14652
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
System
Fan
Heat
Auto
Heat
Setting
M14650
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Heat
Setting
Page 14
14 69-1400–1
Press Heat/Cool Settings to change between heat and
cool settings.
Press increase ▲ or decrease ▼ key to adjust tempera-
ture settings.
NOTE: The display changes from the setpoint to the room
temperature after approximately 3 seconds.
Press Run Program to cancel the Hold and to return to
the program.
Changing Temperature Setting Until a Designated Day and Period
Press Hold Temp twice.
Press Time ▲ ▲ or Time ▼ ▼ until the desired number of
days is displayed (1 to 255 days). (Example: 18 = Hold
will override the daily programs for 18 days)
M14653
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Heat/Cool
Settings
Daylight
Time
Copy
Cool
Setting
M14654
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Cool
Setting
M14655
Time Set Program
System Fan
Run
Program
Hold Temp
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Wake
System
Fan
Heat
Auto
Hold for
Heat
Days
Setting
M14656
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Time
Wake
System
Fan
Heat
Auto
Hold for
Heat
Days
Setting
Page 15
15 69-1400–1
Press Wake, Leave, Return or Sleep to select the period
the program will start. (Example: Return = thermostat will
stop the Hold at the Return period start time)
Press increase ▲ or decrease ▼ key to adjust the
temperature setting, if desired. (Example: Heat 54° =
heating equipment will operate when the room temperature
is below 54°F)
NOTE: When the System is set for Auto, both heat and
cool settings are needed. If the System is set
for Heat, only the Heat setpoint is needed or if
Cool is selected, only the Cool setpoint
is needed.
Press Heat/Cool Settings to change between heat and
cool settings.
Press increase ▲ or decrease ▼ key to adjust the
temperature setting, if desired. (Example: Cool 84° =
cooling equipment will operate when the room temperature
is above 84°F)
NOTE: In this example, the thermostat uses the Hold
setting for eighteen days and returns to the daily
programs at the Return period start time. The
temperature settings are heating 54°F and
cooling 84°F. Only the heating temperature is
used because the System is set for Heat. The
thermostat will use both the heating and
cooling temperature settings when the System
is set to Auto.
M14657
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return
Return
Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
System
Fan
Heat
Auto
Hold for
Heat
Days
Setting
Return
M14658
System
Fan
Heat
Auto
Hold for
Heat
Days
Setting
Return
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Page 16
16 69-1400–1
IMPORTANT
If the Hold needs to be cancelled before the designated
time, press Run Program to return to the program.
Setting System and Fan
The system default setting is Heat and the fan default setting is
Auto. Use the System and Fan keys to change the settings. The
fan settings can be set for each program period individually.
The system selection is for all the program periods.
System settings control the thermostat operation as follows:
Heat: The thermostat controls the heating.
Off: Both the heating and cooling are off.
Cool: The thermostat controls the cooling.
Auto: The thermostat automatically changes between
heating and cooling operation, depending on the indoor
temperature (select models).
Fan settings control the system fan as follows:
On: Fan operates continuously.
Auto: Fan operates with equipment.
Setting Temporary Fan Operation
If your thermostat has a Fan key and this feature, press Fan
until the desired fan operation is selected. This fan setting will
be in effect until the next regularly scheduled period starts.
M14625
Hold Temp
Run
Program
Copy
Daylight
Time
Set Current
Day/Time
System Fan
Time Set Program
Day
System
Fan
Wake
Leave
Return
Sleep
Heat/Cool
Settings
Page 17
17 69-1400–1
Viewing and Resetting Timer Settings
When the thermostat activates a timer, the thermostat flashes
Filter until the timer resets.
1. Reset the timer by pressing the i key until the exired timer
is displayed.
2. Press the Time ▲ key to reset the timer.
3. Press the Run Program key.
NOTE: You can view the number of days remaining at
anytime by pressing the i key three or four times. If
more than one timer is active, all active timers show
sequentially when pressing the i key several times.
M20243
Filter
Days
M20244
Filter
Days
Page 18
18 69-1400–1
M14659
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Daylight
Time
Wake
Room
System
Fan
Em Heat
Auto
AM
DST
Tue
M14660
Time Set Program
System Fan
Run
Program
Hold Temp
Set Current
Day/Time
Wake
Leave
Return Sleep
Day
Heat/Cool
Settings
Daylight
Time
Copy
Outdoor
Using Daylight Savings Time Feature
This feature allows you to change in and out of Daylight
Savings Time with a key press. When pressed in the fall, the
time will go back one hour. In the spring, the time will go ahead
one hour and the display will show DST. See Setting the
Current Day and Time section for initial setting instructions.
NOTE: Pressing Daylight Time more than once within a five
minute period will scroll you through various time
options (Example: one hour earlier or later with or
without DST). Pressing Daylight Time six times in a five
minute period will return you to your original setting.
Displaying the Outdoor Temperature
If your thermostat is equipped with an outdoor sensor, you can
check the temperature at the sensor by pressing i once.
Page 19
19 69-1400–1
80
9
0
70
6
0
9
0
80
70
6
0
Replacing the Batteries (select models)
• Install the batteries in the
wallplate so the positive
terminals all point up
(see illustration).
• If the thermostat is
already mounted on the
wall, remove the thermostat by placing your
thumb between the
thermostat and wallplate
and pulling the thermostat
up and away as shown.
When the batteries are
running low, a REPL BAT
message flashes for one to
two months before the
batteries run out completely.
Replace the batteries as soon
as possible once the message
flashes.
If you insert new batteries within 20 to 30 seconds of removing
the old batteries, the system retains the current time and day. If
the display is blank, the batteries are dead or installed incorrectly. You must reset the time and day. Refer to Set the Clock
for instructions.
As a precaution when leaving home for longer than
a month, change batteries before leaving to
prevent the system from shutting down due to lack
of power. Always use fresh alkaline batteries.
Nonalkaline batteries do not last as long. They also
can leak, causing damage to the thermostat and the wall
surface.
M10622
INSTALL 3 AA ALKALINE BATTERIES
AS SHOWN, POSITIVE (+) TERMINALS
TOWARD TOP.
WALLPLATE
B
RRCOWYG
M16424
Page 20
20 69-1400–1
Adaptive Intelligent Recovery™ Control
Breakthrough Technology Senses Temperature More
Like You Do
Your Deluxe Programmable Thermostat is so smart, it’s
almost human.
•Your body perceives temperature from a variety of sources,
not only from the air in the room, but also from your
surroundings—walls, windows and furnishings.
• Humans feel differences in temperature as slight as two
degrees Fahrenheit.
• Common household thermometers and standard thermostats
sense only air temperature, which might or might not reflect
how hot or cold the room actually feels to a human being.
•Your new thermostat reads both the temperature of the wall
and the air—and responds to temperature changes as little
as one degree Fahrenheit—so room temperature is more
likely to feel right to you and your family.
The Optimum Comfort and Energy Savings Solution
70°F
60°F
SLEEP
HEATING MODE
WAKE
SETPOINT
TEMPERATURE
ACTUAL
TEMPERATURE
THERMOSTAT USES THE SAME SCHEME TO RETURN TO LOWER COMFORT
TEMPERAURE DURING THE COOLING SEASON.
M15084
Page 21
21 69-1400–1
The Deluxe Programmable Thermostat is actually a small but
powerful computer. When calculating the time to turn on your
heating or cooling system, it considers (1) air temperature, (2)
wall temperature, and (3) the time you want the comfort
temperature established.
• During the Adaptive Intelligent Recovery™ time, the
thermostat increases the temperature setpoint from the
energy savings to the comfort temperature. The equipment
may shut off before reaching the comfort temperature to
avoid going past the comfort temperature. This saves
energy by avoiding cycling the equipment and overshooting
the comfort temperature. The thermostat displays Recovery
whenever the thermostat activates the Adaptive Intelligent
Recovery™ feature.
• This thermostat learns from experience. Each day it checks
how closely it hit the recovery target and adjusts the next
day recovery start time accordingly.
• It typically takes four to eight days after installation for the
thermostat to adjust to the local weather, your lifestyle, the
construction of your home and your heating/cooling system.
The thermostat calculates the Leave/Return recovery
separately from the Sleep/Wake recovery.
• With the thermostat, you can choose whether you want to
use the Adaptive Intelligent Recovery™ setting or the
conventional recovery. The thermostat comes preset to the
Adaptive Intelligent Recovery™ setting. When conventional
recovery is desired, call your service technician for assistance. Use the Adaptive Intelligent Recovery™ setting when
you want to choose the exact time that the room reaches
your comfort temperature. Use conventional recovery when
you prefer to choose the exact time your heating or cooling
system comes on to start recovery.
M14561
Mon
Sleep
Room
System
Fan
Em Heat
Auto
AM
Heat
Recovery
Page 22
22 69-1400–1
Saving Energy Across the
United States and Canada
•Save up to 30% in energy costs. The Deluxe Programmable
Thermostat offers you complete comfort and a low cost
easy way to save on your energy bills.
• The energy saving percentages listed on the following maps
are based on setting the program down in winter or up in
summer for eight hours.
• If the time period you choose for setback is longer, you
could see even greater energy savings. The energy saving
period must be at least two hours long to save any energy.
Find the city closest to your home. The energy savings listed
will be similar to the savings you can expect.
30%
28%
26%
24%
22%
20%
18%
16%
14%
12%
8%
6%
2%
10%
4%
Minneapolis
St. Paul
Montreal
Ottawa
Toronto
Buffalo
Cleveland
Milwaukee
Edmonton
Regina
Winnipeg
Calgary
Moncton
North Bay
Quebec
St. John's
Halifax Vancouver Denver
Des Moines
Omaha
Salt Lake
City
Boston
Chicago
Detroit
Pittsburgh
Indianapolis
Cincinnati
Kansas City
St. Louis
Columbus
New York
Philadelphia
Seattle
Louisville
Portland
Wash., D C
San
Francisco
Dallas
Atlanta
Los Angeles
Approximate percentage of energy cost savings
Savings for Once-A-Day
10°F (5°C) decrease
Savings for Twice-A-Day
10°F (5°C) decrease*
Savings for 5°F (3°)
summer increase
TYPICAL ENERGY SAVINGS FOR REPRESENTATIVE CITIES IN THE U.S. AND CANADA
*Based on 10°F (5°C) decrease—(5°F [3°C] decrease
gives approximately 55 percent of these savings).
M2416A
San Diego
Page 23
23 69-1400–1
(Continued)
NOTICE: This equipment is a Class B digital apparatus,
which complies with Canadian Radio Interference
Regulations, CRC c. 1374.
TROUBLESHOOTING GUIDE
Symptom Action
Display will not
come on.
• Check if the thermostat is mounted and
latched on the wallplate—mount and
latch the thermostat on the wallplate.
• Check if the circuit breaker is tripped—
reset the circuit breaker.
• Check if the fuse is blown—replace
the fuse.
• Check if the system switch at the
equipment is in the Off position—set to
the On position.
• Check wiring between thermostat
and HVAC equipment—replace any
broken wires.
• If 24 Vac is present, proceed with
troubleshooting.
Temperature
settings will
not change
(Example:
cannot set the
heating higher
or the cooling
lower).
• Check that the temperature
setpoints are:
- heating: 40 to 90°F (7 to 31°C)
- cooling: 45 to 99°F (9 to 37°C).
"Filter" flashing
in display.
• Indicates a filter timer needs to be reset
- See View and Reset Timer Settings
instructions.
Page 24
24 69-1400–1
Symptom Action
Heating will not
come on.
• Check that setpoint is above room
temperature.
• Check if the circuit breaker is tripped—
reset the circuit breaker.
• Check if the fuse is blown—replace
the fuse.
• Check if the system switch at the
equipment is in the Off position—set to
On position.
• If 24 Vac is present, proceed with
troubleshooting.
• Wait five minutes for the system
to respond.
• Set system selection to Heat.
Cooling will not
come on.
• Check that setpoint is below room
temperature.
• Check if the circuit breaker is tripped—
reset the circuit breaker.
• Check if the fuse is blown—replace the
fuse.
• Check if the system switch at the
equipment is in the Off position—set to
On position.
• If 24 Vac is present, proceed with
troubleshooting.
• Wait five minutes for the system
to respond.
• Set system selection to Cool.
System on
indicator
(flame=heat,
snowflake=cool)
is lit, but no
warm or cool air
is coming from
the registers.
Wait a minute after seeing the flame or
snowflake and then check the registers.
Troubleshooting Guide (continued).
Page 25
25 69-1400–1
WARRANTY
Honeywell warrants this product, excluding battery, to be free from defects
in the workmanship or materials, under normal use and service, for a period
of one (1) year from the date of purchase by the consumer. If, at any time
during the warranty period, the product is defective or malfunctions,
Honeywell shall repair or replace it (at Honeywell’s option) within a
reasonable period of time.
If the product is defective,
(i) return it, with a bill of sale or other dated proof of purchase, to the
retailer from which you purchased it, or
(ii) package it carefully, along with proof of purchase (including date of
purchase) and a short description of the malfunction, and mail it,
postage prepaid, to the following address:
Honeywell Return Goods
Dock 4 MN10-3860
1885 Douglas Drive
Golden Valley, MN 55422
This warranty does not cover removal or reinstallation costs. This warranty
shall not apply if it is shown by Honeywell that the defect or malfunction was
caused by damage which occurred while the product was in the possession
of a consumer.
Honeywell’s sole responsibility shall be to repair or replace the product
within the terms stated above. HONEYWELL SHALL NOT BE LIABLE FOR
ANY LOSS OR DAMAGE OF ANY KIND, INCLUDING ANY INCIDENTAL
OR CONSEQUENTIAL DAMAGES RESULTING, DIRECTLY OR
INDIRECTLY, FROM ANY BREACH OF ANY WARRANTY, EXPRESS OR
IMPLIED, OR ANY OTHER FAILURE OF THIS PRODUCT. Some states do
not allow the exclusion or limitation of incidental or consequential damages,
so this limitation may not apply to you.
THIS WARRANTY IS THE ONLY EXPRESS WARRANTY HONEYWELL
MAKES ON THIS PRODUCT. THE DURATION OF ANY IMPLIED
WARRANTIES, INCLUDING THE WARRANTIES OF MERCHANTABILITY
AND FITNESS FOR A PARTICULAR PURPOSE, IS HEREBY LIMITED TO
THE ONE YEAR DURATION OF THIS WARRANTY. Some states do not
allow limitations on how long an implied warranty lasts, so the above
limitation may not apply to you.
This warranty gives you specific legal rights, and you may have other rights
which vary from state to state.
If you have any questions concerning this warranty, please write our
Customer Assistance Center, Honeywell Inc., P.O. Box 524, Minneapolis,
MN 55440-0524 or call 1-800-468-1502, Monday-Friday, 7:00 a.m. to
5:30 p.m., Central time. In Canada, write Retail Products ON15-02H,
Honeywell Limited/Honeywell Limitée, 155 Gordon Baker Road, North York,
Ontario M2H 3N7.
Page 26
26 69-1400–1
Page 27
27 69-1400–1
Page 28
69-1400–1 G.H. Rev. 12-02
Copyright © 2002 Honeywell International Inc.
All Rights Reserved ® U.S. Registered Trademark
www.honeywell.com/yourhome
Honeywell Limited-Honeywell Limitée
35 Dynamic Drive
Scarborough, Ontario
M1V 429
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422
Printed in U.S.A.
Loading...