Honeywell CSS-O, CSS-C, CSP-O, CSP-C Data Sheet

Solid Core and Split Core Adjustable Current “Status” Switches
CSS-O, CSS-C; CSP-O, CSP-C

FEATURES

• LED status indication
• Integral DIN rail mounting flange
• Easy wiring, non-polarity sensitive
• Accepts up to a 350 MCM (17.3 mm) cable
• Operates up to 200 or 250 continuous amps
• RoHS and WEEE compliant
• Limited five year warranty

DESCRIPTION

PRODUCT DATA
The CSS solid core and the CSP split core current switches have either Normally-Open (N.O.) or Normally-Closed (N.C.) output configurations. All of these sensors will have a solid­state output with an adjustable trip point (setpoint). These current switches are ideal for providing status information on any type of AC current using equipment. The CSS series current switches are an excellent choice for new installations. The CSP series current switches are ideal for retrofit or existing installations since it is not necessary to power down the unit and disconnect any wires during the installation process. The CSS and CSP current switches are accurate, reliable, easy to install and require less servicing than differential pressure switches, flow switches and paddle wheels.
These current switches should be used in applications in which a current switch with adjustable trip point is required. A current switch can be used to monitor fan and pump status, motors, compressors and electrical equipment for proper operation. A change in the operating current may indicate motor failure, belt loss/slippage or mechanical failure. Any time one of these events occur the current can significantly increase or decrease, thus tripping the sensor and notifying building management of an alarm condition.
The CSS and CSP series current switches can be used to monitor devices with a maximum continuous operating current of up to 200 or 250 Amps depending on the model. These switches will not need to be externally powered since the power for the switch is induced from the conductor being monitored. Another great feature of the CSS and CSP series current switches is that they include both a red and green LED that will indicate the “Status” of the switch contacts. All of these units come with a unique 1-3/8 in. (35 mm) DIN rail mounting flange and a limited five year warranty.
Contents
Features ............................................................................1
Description ........................................................................1
Specifications ....................................................................2
Ordering Information .........................................................2
Safety ................................................................................4
Installation .........................................................................4
Troubleshooting.................................................................6
IND.CONT.EQ.
3JHX
63-2651—1
SOLID CORE AND SPLIT CORE ADJUSTABLE CURRENT “STATUS” SWITCHES

SPECIFICATIONS

Sensor Power: Induced from monitored conductor
Amperage Rating: 0 to 200 Amps and 0 to 250 Amps
(See Table 1)
Operating Frequency Range: 40 Hz to 1 kHz
Isolation Voltage: 2220 Vac
Max Sensing Current Voltage: 600 Vac
Output Switch Rating:
CSS-O; CSP-O: 0.3 Amps @ 200 Vac/Vdc CSS-C; CSP-C: 0.15 Amps @ 300 Vac/Vdc
Adjustable Trip Point (Setpoint): See Table 1
Hysteresis (Dead Band): 10% Setpoint, typical
Status Indication:
Red LED - Above Trip Point Green LED - Below Trip Point
Aperture (Hole) Size: 3/4 in. (19 mm), Accepts up to
350 MCM (17.3 mm) cables
Table 1. Operating Specifications
Product Number Core Type
CSS-O-A300-001 Solid N.O. 1.0-250 Amps 0.30 Amps @
CSS-O-A200-001 Solid N.O. 0.5-250 Amps 0.30 Amps @
CSS-C-A300-001 Solid N.C. 1.0-250 Amps 0.15 Amps @
CSP-O-A300-001 Split N.O. 3.0-200 Amps 0.30 Amps @
CSP-O-A200-001 Split N.O. 2.0-200 Amps 0.30 Amps @
CSP-C-A300-001 Split N.C. 3.0-250 Amps 0.15 Amps @
CSP-C-A200-001 Split N.C. 2.5-250 Amps 0.15 Amps @
Normal
Position
Adjustable Trip
Point
Dimensions: See Figures 1 and 2
DIN Rail Size: 1-3/8 in. (35 mm)
Unit Weight:
CSS: 0.21 lb (0.1 kg) CSP: 0.23 lb (0.1 kg)
Enclosure Rating/Color: UL94-5VB/Burgundy
Operating Temperature Range: 5° to 104° F (-15° to 40° C)
Operating RH Range: 0 to 95% RH, non-condensing
Agency Approvals:
CE, UL Environmental Compliance:
RoHS-Directive 2002/95/EC WEEE-Directive 2002/96/EC
NOTE: DO NOT use the LED’s to indicate whether the
Output Switch
Rating
200 Vac/Vdc
200 Vac/Vdc
300 Vac/Vdc
200 Vac/Vdc
200 Vac/Vdc
300 Vac/Vdc
300 Vac/Vdc
sensors have power applied to them.
Max. Current
Cont.
250 Amps 500 Amps 1,000 Amps
250 Amps 500 Amps 1,000 Amps
250 Amps 500 Amps 1,000 Amps
200 Amps 400 Amps 800 Amps
200 Amps 400 Amps 800 Amps
250 Amps 500 Amps 1,000 Amps
250 Amps 500 Amps 1,000 Amps
Max. Current
for 6 secs.
Max. Current
for 1 sec.
ORDERING INFORMATION
When purchasing replacement and modernization products from your TRADELINE® wholesaler or distributor, refer to the TRADELINE
If you have additional questions, need further information, or would like to comment on our products or services, please write or phone:
1. Your local Honeywell Automation and Control Products Sales Office (check white pages of your phone directory).
2. Honeywell Customer Care
In Canada—Honeywell Limited/Honeywell Limitée, 35 Dynamic Drive, Toronto, Ontario M1V 4Z9. International Sales and Service Offices in all principal cities of the world. Manufacturing in Australia, Canada, Finland, France, Germany, Japan, Mexico, Netherlands, Spain, Taiwan, United Kingdom, U.S.A.
63-2651—1 2
®
Catalog or price sheets for complete ordering number.
1885 Douglas Drive North Minneapolis, Minnesota 55422-4386
SOLID CORE AND SPLIT CORE ADJUSTABLE CURRENT “STATUS” SWITCHES
A
TOP VIEW
TERMINAL
BLOCK
13/32 (10)
LEFT SIDE VIEW
1/2 (13)
TRIP
TRIP
ON
TRIP
OFF
ADJ
TRIP ON = ABOVE TRIP POINT
ADJ. RANGE: 0.8-250A
OUTPUT: 0.3A @ 200 VDC/VAC
13/64 (5) TYP.
2-27/32 (72)
FRONT VIEW
25/32 (20)
9/64 (4)
1-3/8 (35)
3-3/8 (86)
Fig. 1. CSS current sensor dimensions in inches (mm)
TOP VIEW
TRIP TRIP
TRIP
ON OFF
ADJ
TRIP ON = Above Trip Point
Adj. Range: 2.0-250A
Output: 0.3A @ 200 VDC/VAC
7/32 (6) TYP.
RIGHT SIDE VIEW
63/64 (25)
2-17/64
(58)
M23581A
TERMINAL
BLOCK
LEFT SIDE VIEW
2-27/32 (72)
FRONT VIEW
3/4
(19)
49/64
(19)
RIGHT SIDE VIEW
9/64 (4)
1-3/8 (35)
3-21/64 (85)
Fig. 2. CSP current sensor dimensions in inches (mm)
1-5/64 (25)
2-45/64
(69)
M23580
3 63-2651—1
Loading...
+ 5 hidden pages