TrueZONE® Bypass
Finally there’s a bypass zoning damper that doesn’t require balancing those pesky weights. The new Honeywell TrueZONE Bypass damper dramatically cuts installation time by replacing the old weight system with a simple dial. No more hassles. No more frustration. Just an easy installation and year-round performance without the need for adjustments. It’s the latest in the complete lineup of Honeywell TrueZONE solutions that make zoning easier than ever.
THERMOSTATS | ZONING | AIR CLEANERS | HUMIDIFIERS | DEHUMIDIFIERS | UV SYSTEMS | VENTILATION | WATER SOLUTIONS | COMBUSTION
Bypass Hassle
The days of spending one to two hours installing a zoning bypass damper are gone. With the new TrueZONE Bypass damper from Honeywell, you get an out of the box solution with little configuration needed. The TrueZONE Bypass replaces the tedious weight system with a simple, preset dial that needs little or no adjustment. Zoning just got a whole lot simpler.
Bypass Callbacks
Bypass dampers are required in nearly all zoning installations to relieve pressure. Installing them used to require time-consuming weight balancing, but the TrueZONE Bypass has sent the weight system packing:
•Eliminates installation hassles
•Simple dial for setting when the system starts to bypass
•Spend less time on every zoning job
•Exclusive Honeywell technology
bypass Labor
The timesaving dial is just one of many TrueZONE Bypass innovations:
•Installs at any orientation at any angle
•Allows more airflow than typical weighted models, so you can install a smaller size
•Can handle all of the airflow needs of today’s zoning systems to provide constant pressure relief regardless of the blower speed
•Designed for easy flex-duct installation
•Profitable — saves you upfront time through
the fast installation and follow-up time by eliminating the callbacks associated with weighted models
•Quiet, efficient and reliable
bypass risk = More Profits Per Job
|
|
Weighted |
Modulating |
|
|
TrueZONE |
Round |
Damper |
|
|
Bypass |
Barometric |
With |
|
|
Damper |
Damper |
Control |
|
|
|
|
|
|
Materials |
|
|
|
|
|
|
|
|
|
Wiring |
– |
– |
24 VAC and |
|
pressure port |
||||
|
|
|
||
|
|
|
|
|
Labor (minutes) |
15 |
60 |
30 |
|
|
|
|
|
|
Labor |
|
|
|
|
|
|
|
|
Total
Product installation time and costs are estimates only. Installation times and cost may vary.
|
TrueZONE Bypass Dampers |
|
CPRD8 |
|
Bypass up to 600 CFM |
CPRD10 |
|
Bypass up to 1000 CFM |
CPRD12 |
|
Bypass up to 1400 CFM |
CPRD14 |
|
Bypass over 1400 CFM |
|
|
|
Install Zoning With Confidence!
Learn More
For more information about Honeywell TrueZONE Bypass dampers,
see your distributor or visit www.forwardthinking.honeywell.com.
Automation and Control Solutions
Honeywell
1985 Douglas Drive North
Golden Valley, MN 55422 www.honeywell.com
Follow us on Twitter: @honeywellcpro
YouTube: @honeywellcpro
50-1822 PM
January 2013
© 2013 Honeywell International Inc.