Honeywell BW IntelliDoX Specifications
Gas Detection
IntelliDoX
Automated instrument management system
Get more from your gas detector with unmatched performance and
customization. The IntelliDoX system combines smart docking modules
and device management sof tware to provide automated instrument
management for compatible detectors, helping you drive productivity,
reliabilit y and efficiency.
Fast instrument management and enhanced productivity.
IntelliDoX is easy to install, taking under 2 minutes from setup of a
five‑module dock to the bump of your first instrument. Each module has
its own operating system, LCD screen and internal pump allowing you
to perform more than one operation at the same time.
Whether you want to bump three detectors or calibrate others – you can
get more done in less time.
Flexible configuration to meet changing needs
Configure the low and high alarm set points – plus other detector parameters
– throughout the lifespan of the detector. So you can rely on your detector to
always work the way you want it to.
Efficient networking and data transfer for easy record‑keeping
Use either USB or Ethernet to transfer bump tests, peak exposures and
other gas‑detection data.
• A new level of customization for device management
• Configure alarm set points, track compliance of workers and more
• Flexible docks and soft ware – expandable to five modules
• Quick and easy setup – great for turnarounds
FEATURES & BENEFITS
• Industr y-leading FastBump test that eliminates bottlenecks,
while avoiding costly purge cycles that waste gas
• Gangable up to five modules, each with its own LCD screen and
keypad for independent operation
• Easy to set up with no tool s required
• Easy to connect via Ethernet to a network
• USB por t to easily configure dock module settings or
retrievedata without network access
• Automated bump test and span calibration operation
• Device management with Safety Suite Device Configurator
• Modular nests for device changes
• Bump testing, calibration, configuration, and record-keeping
support for compatible detectors. User updatable settings:
- Configure alarm set tings
- Display gas reading during alarm
- Enable non-compliance indicator
- Hibernate detector
- Schedule bump test and calibration reminders
- Transfer e vent logs
- Time display pr efer ence s
- Update firmware
Compatible Detectors
• Honeywell BW® Clip Series
• Honeywell BW™ Solo
• Honeywell BW™ Clip4
• Honeywell BW™ MicroClip Series
• Honeywell BW™ Ultra
• Honeywell BW Max XTII
Options & Accessories
Multi-Inlet Key – Configure a single
IntelliDoX module to connect
multiple calibration gas cylinders
Honeywell IntelliDox Technical Specifications
TECHNICAL SPECIFICATIONS
SIZE
WEIGHT 4.2 lb (1.91 kg)
POWER SUPPLY 12 V / 8.33A ITE Power Supply
REALTIME CLOCK Provides time and date stamp
COMMUNICATIONS METHOD Two-way infrared communication between docking module and detector
EXTERNAL INTERFACE
MENU NAVIGATION
AUTOMATIC TESTS
DATA STORAGE 2 GB internal
PUMP
INSTRUMENT MANAGEMENT SYSTEM Safety Suite Device Configurator or Fleet Manager II, version 4.5 or higher
RATINGS
WARRANTY Full two year warranty
5.4 x 14.2 x 4.3 in (13.8 x 36.2 x 10.9 cm)
(individual docking module)
1 USB port
1 Ethernet port
Adjust display settings
Adjust time and date
Configure gas inlets
Review IntelliDoX module
Password protected (if enabled)
Configure UI display language: English, French, German, Portuguese, Spanis
Automatic bump test to verify sensor responds to target gas
Automatic bump test in 10 seconds for BW Clip / BW Clip Real Time with FastBump
Independent pump in each IntelliDoX module
Flow Rate: 350 ml/min
EMC Directive 2014/30/EU
Low Voltage Directive 2014/35/EU
FCC Part 15
ICES003 Canadian EMI
IP20
For more information
www.honeywellanalytics.com
Datasheet_IntelliDoX_DS20151112-09_US-EN | 01/19
Note: Due to ongoing research and product improvement,
specifications are subject to change without notice.
© 2019 Honeywell International Inc.
Device Management with
Honeywell SafetySuite
honeywellanalytics.com/
SafetySuite
Loading...