Honda EG3600CL, EG4500CL, EG5500CL Owner's Manual

MANUEL DE L’UTILISATEUR

BEDIENUNGSANLEITUNG

MANUAL DE EXPLICACIONES

Honda

OWNER’S MANUAL

EG3600CL·EG4500CL
EG5500CL

Original instructions

Notice originale

Originalbetriebsanleitung

Manual original

The‘‘e-SPEC’’mark symbolizes environmentally
responsible technologies applied to Honda power
equipment, which contains our wish to ‘‘preserve
nature for generations to come.’’

11/04/26 16:08:38 32Z30600_001

11/04/26 16:08:40 32Z30600_002

1

Indicates a strong possibility of severe personal injury or

death if instructions are not followed.

Indicates a possibility of personal injury or equipment

damage if instructions are not followed.

Honda generator is designed to give safe and dependable service if
operated according to instructions. Read and understand the Owner’s
Manual before operating the generator. Failure to do so could result
in personal injury or equipment damage.

Thank you for purchasing a Honda generator.

All information in this publication is based on the latest product
information available at the time of approval for printing.

Honda Motor Co., Ltd. reserves the right to make changes at any time
without notice and without incurring any obligation.

No part of this publication may be reproduced without written
permission.

This manual should be considered a permanent part of the generator
and should remain with it if it is resold.

Pay special attention to statements preceded by the following words:

Gives helpful information.

If a problem should arise, or if you have any questions about the
generator, consult an authorized Honda dealer.

The illustration may vary according to the type.

The illustrations herein are mainly based on:

This manual covers operation and maintenance of the EG3600CL·
EG4500CL·EG5500CL generators.

BT type

11/04/26 16:08:53 32Z30600_003

2

CONTENTS

...................................................................1. SAFETY INSTRUCTIONS . 3

.............................................................2. SAFETY LABEL LOCATIONS . 7

.................................................CE mark and noise label locations . 10

.....................................................3. COMPONENT IDENTIFICATION . 11

................................................................4. PRE-OPERATION CHECK . 17

.................................................................5. STARTING THE ENGINE . 22

High altitude operation

............................................................................6. GENERATOR USE . 27

.................................................................7. STOPPING THE ENGINE . 33

................................................................................8. MAINTENANCE . 35

...........................................................9. TRANSPORTING/STORAGE . 43

......................................................................10. TROUBLESHOOTING . 47

.............................................................................11. SPECIFICATIONS . 49

.......................................................12. INSTALLATION OF KIT PARTS . 52

..........................................................................13. WIRING DIAGRAM . 55

.................................................................SWITCH CONNECTIONS . 56

....................................................................................RECEPTACLE . 56

..............MAJOR Honda DISTRIBUTOR ADDRESSES . inside back cover

.......‘‘ ’’ CONTENT OUTLINE . inside back cover

EC Declaration of Conformity

11/04/26 16:08:57 32Z30600_004

3

SAFETY INSTRUCTIONS1.

IMPORTANT SAFETY INFORMATION

Operator Responsibility

Honda generators are designed for use with electrical equipment that
has suitable power requirements. Other uses can result in injury to the
operator or damage to the generator and other property.
Most injuries or property damage can be prevented if you follow all
instructions in this manual and on the generator. The most common
hazards are discussed below, along with the best way to protect
yourself and others.

Never attempt to modify the generator. It can cause an accident as
well as damage to the generator and appliances.

Do not connect an extension to the muffler.
Do not modify the intake system.
Do not adjust the governor.
Do not remove the control panel or do not change the wiring of the
control panel.

Know how to stop the generator quickly in case of emergency.
Understand the use of all generator controls, output receptacles, and
connections.
Be sure that anyone who operates the generator receives proper
instruction. Do not let children operate the generator without parental
supervision.

Be sure to observe the instructions in this manual for how to use the
generator and maintenance information. Ignoring or improperly
following the instructions can cause an accident such as an electric
shock, and the condition of the exhaust gas may deteriorate.

Consult your authorized Honda dealer for disassembly and service of
the generator that are not covered in this manual.

Do not operate the generator with any cover removed. You may get
your hand or foot caught in the generator and it may cause accident.

Place the generator on a firm level place before operation.

Obey all applicable laws and regulations where the generator is used.

Gasoline and Oil is toxic. Follow the instructions provided by each
manufacturer before use.

11/04/26 16:09:10 32Z30600_005

4

Carbon Monoxide Hazards

Electric Shock Hazards

Exhaust contains poisonous carbon monoxide, a colorless, odorless
gas. Breathing exhaust can cause loss of consciousness and may lead
to death.

If you run the generator in an area that is confined, or even partially
enclosed area, the air you breathe could contain a dangerous amount
of exhaust gas.

Never run your generator inside a garage, house, or near open
windows or doors.

The generator produces enough electric power to cause a serious
shock or electrocution if misused.
Using a generator or electrical appliance in wet conditions, such as
rain or snow, or near a pool or sprinkler system, or when your hands
are wet, could result in electrocution.
Keep the generator dry.

If the generator is stored outdoors, unprotected from the weather,
check all of the electrical components on the control panel before each
use. Moisture or ice can cause a malfunction or short circuit in
electrical components that could result in electrocution.

If you get an electric shock, consult a doctor and have medical
treatment immediately.

11/04/26 16:09:19 32Z30600_006

−

−

−

5

Fire and Burn Hazards

Refuel With Care

Do not use the generator in areas with a high risk of fire.

The exhaust system gets hot enough to ignite some materials.

Keep the generator at least 1 meter (3 feet) away from buildings and
other equipment during operation.
Do not enclose the generator in any structure.
Keep flammable materials away from the generator.

Some parts of the internal combustion engine are hot and may cause
burns. Pay attention to the warnings on the generator.

The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before storing the generator indoors.

Do not pour the water directly on the generator to put out the fire
when it occurs. Use an appropriate fire extinguisher specially
designed for electric fire or oil fire.

If you inhale fumes produced by an accidental fire with the generator,
consult a doctor and have medical treatment immediately.

Gasoline is extremely flammable, and gasoline vapor can explode.
Allow the engine to cool if the generator has been in operation.

Refuel only outdoors in a well ventilated area with the engine off.

Do not refuel during operation.

Do not overfill the fuel tank.

Never smoke near gasoline, and keep other flames and sparks away.

Always store gasoline in an approved container.

Make sure that any spilled fuel has been wiped up before starting the
engine.

11/04/26 16:09:28 32Z30600_007

6

Explosion proof

Disposal

This generator is not compliant with explosion proof.

To protect the environment, do not dispose of the used generator,
battery, engine oil, etc. carelessly by leaving them in the waste.
Observe the local laws or regulations or consult your authorized
Honda generator dealer to dispose of these parts.

Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.

An improperly disposed battery can hurt the environment. Always
confirm local regulations for battery disposal. Contact your Honda
servicing dealer for a replacement.

11/04/26 16:09:34 32Z30600_008

7

SAFETY LABEL LOCATIONS

2.

FUEL CAUTION

HOT CAUTION

READ OWNER’S MANUAL

EXHAUST CAUTION

CONNECT CAUTION

HOT CAUTION

These labels warn you of potential hazards that can cause serious
injury. Read the labels and safety notes and precautions described in
this manual carefully.
If a label comes off or becomes hard to read, contact your Honda
dealer for a replacement.

11/04/26 16:09:45 32Z30600_009

8

Honda generator is designed to give safe and
dependable service if operated according to
instructions.
Read and understand the Owner’s Manual
before operating the generator. Failure to do
so could result in personal injury or equipment
damage.

Exhaust contains poisonous carbon monoxide,
a colorless, odorless gas. Breathing carbon
monoxide can cause loss of consciousness
and may lead to death.
If you run the generator in an area that is
confined, or even partially enclosed area, the
air you breathe could contain a dangerous
amount of exhaust gas.
Never run your generator inside a garage,
house or near open windows or doors.

Improper connections to a building’s electrical
system can allow current from the generator
to backfeed into the utility lines.
Such backfeed may electrocute utility
company workers or others who contact the
lines during a power outage, and the
generator may explode, burn, or cause fires
when utility power is restored.
Consult the utility company or a qualified
electrician prior to making any power
connections.

11/04/26 16:09:54 32Z30600_010

9

A hot exhaust system can cause serious burns.
Avoid contact if the engine has been running.

Gasoline is highly flammable and explosive.
Turn the engine off and let it cool before
refueling.

11/04/26 16:10:00 32Z30600_011

10

CE mark and noise label locations

Performance class

Year of manufacture

NOISE LABEL AND CE MARK

[Example: EG5500CL (BT type)]

NOISE LABEL

Quality class
IP code

Dry mass

Name and address of
authorized representative

Manufacturer and address

11/04/26 16:10:11 32Z30600_012

11

COMPONENT IDENTIFICATION3.

CONTROL PANEL

AIR CLEANER

FUEL VALVE LEVER

ENGINE SERIAL NUMBER

FUEL GAUGE

SEDIMENT CUP

OIL FILLER CAP

STARTER GRIP

OIL DRAIN BOLT

FUEL TANK CAP

SPARK PLUG

MUFFLER

FRAME SERIAL NUMBER

CHOKE LEVER

Frame serial number:

Engine serial number:

Record the frame serial number and the engine serial number in the
spaces below. You will need these serial numbers when ordering parts.

11/04/26 16:10:19 32Z30600_013

12

CONTROL PANEL

EG3600CL: BT type

EG3600CL: FT type

EG3600CL: ITT type

AC CIRCUIT BREAKER

AC CIRCUIT BREAKER

GROUND TERMINAL

GROUND TERMINAL

ENGINE SWITCH

ENGINE SWITCH

VOLTAGE SELECTOR SWITCH

230V RECEPTACLE

ENGINE SWITCH

AC CIRCUIT BREAKER

230V RECEPTACLES

GROUND TERMINAL

AC CIRCUIT PROTECTOR

230V RECEPTACLES

115V RECEPTACLES

11/04/26 16:10:25 32Z30600_014

＊

＊

＊

13

AC CIRCUIT BREAKER

AC CIRCUIT BREAKER

GROUND TERMINAL

GROUND TERMINAL

ENGINE SWITCH

ENGINE SWITCH

VOLTAGE SELECTOR SWITCH

: Except EG3600CL

AC CIRCUIT PROTECTORS

230V RECEPTACLES

AC CIRCUIT PROTECTORS

115V RECEPTACLES

230V RECEPTACLE

EG4500CL, EG5500CL: BT type

EG3600CL, EG4500CL, EG5500CL: GT, GWT types

11/04/26 16:10:31 32Z30600_015

14

AC CIRCUIT BREAKER

AC CIRCUIT BREAKER

GROUND TERMINAL

GROUND TERMINAL

ENGINE SWITCH

ENGINE SWITCH

AC CIRCUIT PROTECTOR

230V RECEPTACLES

AC CIRCUIT PROTECTORS

230V RECEPTACLES

EG4500CL, EG5500CL: FT type

EG4500CL, EG5500CL: ITT type

11/04/26 16:10:36 32Z30600_016

15

AC Circuit Protectors

ON

OFF

EG3600CL: BT type EG4500CL, EG5500CL: GT, GWT types

AC CIRCUIT PROTECTOR AC CIRCUIT PROTECTORS

The AC circuit protectors will automatically switch OFF if there is a
short circuit or a significant overload of the generator at each
receptacle. If an AC circuit protector switches OFF automatically, check
that the appliance is working properly and does not exceed the rated
load capacity of the circuit before resetting the AC circuit protector ON.

11/04/26 16:10:43 32Z30600_017

16

AC CIRCUIT PROTECTOR

AC CIRCUIT PROTECTORSAC CIRCUIT PROTECTORS

EG4500CL, EG5500CL: BT type EG4500CL, EG5500CL: FT type

EG4500CL, EG5500CL: ITT type

11/04/26 16:10:47 32Z30600_018

17

PRE-OPERATION CHECK4.

Be sure to check the generator on a level surface with the engine
stopped.

Using non detergent oil or 2-stroke engine oil could shorten the
engine’s service life.

Recommended oil:

AMBIENT TEMPERATURE

Check the engine oil level before each use.

Use 4-stroke motor oil that meets or exceeds the requirements for API
service category SE or later (or equivalent). Always check the API
service label on the oil container to be sure it includes the letters SE or
later (or equivalent).

SAE 10W-30 is recommended for general, all-temperature use. Other
viscosities shown in the chart may be used when the average
temperature in your area is within the indicated range.

Read the instruction on the oil container before use.

1.

11/04/26 16:10:55 32Z30600_019

18

Running the engine with insufficient oil can cause serious engine
damage.

OIL FILLER HOLE

UPPER LIMIT

DIPSTICK

OIL FILLER CAP

The Oil Alert system will automatically stop the engine before the oil
level falls below the safe limit. However, to avoid the inconvenience of
an unexpected shutdown, it is still advisable to visually inspect the oil
level regularly.

Remove the oil filler cap and wipe the dipstick clean.
Check the oil level by inserting the dipstick in the filler hole
without screwing it in.
If the oil level is low, fill to the upper limit of the oil filler neck with
the recommended oil.

a.
b.

c.

11/04/26 16:11:03 32Z30600_020

19

Avoid repeated or prolonged contact with skin or breathing of
vapor.
KEEP OUT OF REACH OF CHILDREN.

Be careful not to spill fuel when refueling. Spilled fuel or fuel vapor
may ignite. If any fuel is spilled, make sure the area is dry before
starting the engine.

Do not overfill the fuel tank (there should be no fuel above the
upper level mark (red) on the fuel strainer). After refueling, make
sure the fuel tank cap is closed properly and securely.

Refuel in a well ventilated area with the engine stopped. Do not
smoke or allow flames or sparks in the area where the engine is
refueled or where gasoline is stored.

Gasoline is extremely flammable and is explosive under certain
conditions.

FUEL GAUGE FUEL TANK CAP

FUEL
STRAINER

UPPER
LEVEL

UPPER LEVEL MARK (RED)

FULL EMPTY

Check the fuel level.

After refueling, tighten the fuel tank cap securely.

Check the fuel gauge. If the fuel level is low, refuel the fuel tank until
the level as specified.

Use automotive unleaded gasoline with a Research Octane Number of
91 or higher (a Pump Octane Number of 86 or higher).
Never use stale or contaminated gasoline or an oil/gasoline mixture.
Avoid getting dirt or water in the fuel tank.

2.

11/04/26 16:11:14 32Z30600_021

20

Gasolines Containing Alcohol

Gasoline spoils very quickly depending on factors such as light
exposure, temperature and time.

Using contaminated gasoline can seriously damage the engine
(caburetor clogged, valve stuck).
Such damage due to spoiled fuel is disallowed from coverage by the
warrantry.
To avoid this please strictly follow these recommendations:

In worst cases, gasoline can be contaminated within 30 days.

Only use specified gasoline (see page ).

If long storage (more than 30 days) is foreseen, drain fuel tank and
carburetor (see page ).

To slow deterioration, keep gasoline in a certified fuel container.

Use fresh and clean gasoline.

If you decide to use a gasoline containing alcohol (gasohol), be sure its
octane rating is at least as high as that recommended by Honda.
There are two types of ‘‘gasohol’’: one containing ethanol, and the
other containing methanol.
Do not use gasohol that contains more than 10% ethanol.
Do not use gasoline containing more than 5% methanol (methyl or
wood alcohol) and that does not also contain co-solvents and
corrosion inhibitors for methanol.

Fuel system damage or engine performance problems resulting
from the use of gasoline that contains more alcohol than
recommended is not covered under the warranty.
Before buying gasoline from an unfamiliar station, first determine if
the gasoline contains alcohol, if it does, find out the type and
percentage of alcohol used.
If you notice any undesirable operating symptoms while using a
particular gasoline. Switch to a gasoline that you know contains less
than the recommended amount of alcohol.

19

45

11/04/27 10:48:15 32Z30600_022

21

Never run the engine without the air cleaner element. Rapid engine
wear will result from contaminants, such as dust and dirt, being
drawn through the carburetor, into the engine.

AIR CLEANER ELEMENT

AIR CLEANER COVER

CLIP

Check the air cleaner.

Unsnap the two air cleaner cover clips, remove the air cleaner cover,
and remove the air cleaner element.

Check the air cleaner element to be sure it is clean and in good
condition.

Clean or replace the air cleaner element if necessary (see page ).

3.

38

11/04/26 16:11:35 32Z30600_023

22

STARTING THE ENGINE5.

When starting the generator after adding fuel for the first time, after
long-term storage, or after running out of fuel, turn the fuel valve
lever to the ON position, then wait for 10 to 20 seconds before
starting the engine.

VOLTAGE SELECTOR SWITCH

AC CIRCUIT BREAKER

AC CIRCUIT BREAKER

OOFFFF

BT typeFT, GT, GWT, ITT types

115 V

230 V

OOFFFF

OOFFFF

OOFFFF

Before starting the engine disconnect any load from the AC receptacle.

Set the Voltage Selector Switch to match the voltage requirements
for the application.

Make sure that the AC circuit breaker is in the OFF position. The
generator may be hard to start if a load is connected.

1. BT type only

2.

11/04/26 16:11:44 32Z30600_024

23

ON

OONN

OPEN

CCLLOOSSEEDD

FUEL VALVE LEVER

CHOKE LEVER

CLOSED OPEN

Turn the fuel valve lever to the ON position.

Move the choke lever to the CLOSED position to start a cold engine.
Move the choke lever to the OPEN position as the engine warms up.

3.

4.

11/04/26 16:11:51 32Z30600_025

24

The starter grip can be drawn back very quickly before you release
it. This may pull your hand forcefully toward the engine and cause
an injury.
Do not allow the starter grip to snap back. Return it slowly by hand.
Do not let the starter rope rub against the generator body, or the
rope will wear out prematurely.

STARTER GRIP

DDiirreeccttiioonn ttoo ppuullll

ON

ON

ENGINE SWITCH

Turn the engine switch to the ON position.

Pull the starter grip lightly until you feel resistance, then pull the
starter grip briskly toward in the direction of the arrow as shown
below.

5.

6.

11/04/26 16:11:58 32Z30600_026

25

OOPPEENN

OOPPEENN

CHOKE LEVER

Move the choke lever to the OPEN position as the engine warms up.7.

11/04/26 16:12:02 32Z30600_027

26

High altitude operation

Operation of the generator at an altitude lower than the carburetor is
jetted for may result in reduced performance, overheating, and
serious engine damage caused by an excessively lean air/fuel mixture.

At high altitude, the standard carburetor air-fuel mixture will be
excessively rich. Performance will decrease, and fuel consumption will
increase.

High altitude performance can be improved by specific modifications
to the carburetor. If you always operate the generator at altitudes
higher than 1,500 meters (5,000 feet) above sea level, have your
authorized Honda dealer perform these carburetor modifications.

Even with suitable carburetor jetting, engine horsepower will decrease
approximately 3.5% for each 300 meter (1,000 foot) increase in altitude.
The affect of altitude on the horsepower will be greater than this if no
carburetor modification is made.

11/04/26 16:12:07 32Z30600_028

27

GENERATOR USE6.

Improper connections to a building’s electrical system can allow
current from the generator to backfeed into the utility lines.
Such backfeed may electrocute utility company workers or others
who contact the lines during a power outage, and the generator may
explode, burn, or cause fires when utility power is restored.
Consult the utility company or a qualified electrician prior to making
any power connections.

GENERATOR

Connecting with one RCBO

APPLIANCES

RCBO

Connecting with two RCBO

APPLIANCES

GENERATOR

RCBO

RCBO

GROUND
TERMINAL

The generator produces enough electric power to cause a serious
shock or electrocution if misused.
Be sure to ground the generator when the connected appliance is
grounded.

To ground the terminal of the
generator, use a cooper wire with
same or larger diameter than the
cord of the connected appliance.

Use extension cord set with ground conductor when connecting an
appliance with ground conductor.

To identify the Ground pin in the plug, see RECEPTACLE page .

Connect a RCBO (Residual current circuit breaker with overload
protection) of 30 mA ground fault detection and cut-off of less than 0.4
seconds at more than 30 A of output current, if you are using two or
more appliance.
Follow the instructions provided by each RCBO manufacturer before
use.

56

11/04/26 16:12:17 32Z30600_029

28

Do not exceed the current limit specified for any one receptacle.
Do not modify or use the generator for other purposes than it is
intended for. Also observe the following when using the generator.
Do not connect an extension to the exhaust pipe.
When an extension cable is required, be sure to use a tough rubber
sheathed flexible cable (IEC 245 or equivalent).
Limit length of extension cables; 60 m (200 feet) for cables of 1.5
mm

(0.0023 in ) and 100 m (330 feet) for cables of 2.5 mm (0.0039

in

). Long extension cables will lower usable power due to
resistance in the extension cable.
Keep the generator away from other electric cables or wires such as
commercial power supply lines.

Make sure the electrical rating of the tool or appliance does not
exceed that of the generator. Never exceed the maximum power
rating of the generator. Power levels between rated and maximum
may be used for no more than 30 minutes.
Limit operation requiring maximum power to 30 minutes.
Maximum power is:

3.6 kVA

3.68/4.5 kVA

4.5 kVA

3.68/5.5 kVA

5.5 kVA

For continuous operation, do not exceed the rated power.
Rated power is:

3.2 kVA

3.68/4.0 kVA

4.0 kVA

3.68/5.0 kVA

5.0 kVA

In either case, the total power requirements (VA) of all appliances
connected must be considered.
Most appliance motors require more than their rated wattage for
startup.

EG3600CL:
EG4500CL:

EG5500CL:

EG3600CL:
EG4500CL:

EG5500CL:

(BT type)
(FT, GT, GWT, ITT types)

(FT, GT, GWT, ITT types)

(BT type)

(BT type)

(BT type)

(FT, GT, GWT, ITT types)

(FT, GT, GWT, ITT types)

(BT, FT, GT, GWT, ITT types)

(BT, FT, GT, GWT, ITT types)

11/04/26 16:12:32 32Z30600_030

29

AC Applications

Be sure that all appliances are in good working order before
connecting them to the generator. Electrical equipment (including
lines and plug connections) should not be defective. If an appliance
begins to operate abnormally, becomes sluggish, or stops suddenly,
turn off the generator engine switch immediately. Then disconnect
the appliance, and examine it for signs of malfunction.

Substantial overloading will switch off the AC circuit breaker.
Marginal overloading may not switch off the AC circuit breaker, but
it will shorten the service life of the generator.

ON

ON

PLUG

AC CIRCUIT BREAKER

VOLTAGE SELECTOR SWITCH

115 V

230 V

Most motorized appliances require more than their rated power for
startup.

Set the Voltage Selector Switch to
match the voltage requirements
for the application.

Start the engine (see page ).

Switch the AC circuit breaker ON.

Confirm that the appliance to be
used is switched off, and plug
in the appliance.

1.

4.

22

BT type only

2.

3.

11/04/26 16:12:41 32Z30600_031

30

AC Circuit Protectors

ON

OFF

EG3600CL: BT type

AC RECEPTACLE
No.1

AC RECEPTACLE No.2

AC RECEPTACLE No.2

AC RECEPTACLE No.3

AC RECEPTACLE No.1

EG4500CL, EG5500CL: GT, GWT types

AC CIRCUIT PROTECTOR
(For receptacle No.3)

AC CIRCUIT PROTECTOR
(For receptacle No.1)

AC CIRCUIT PROTECTOR
(For receptacle No.2)

The AC circuit protectors will automatically switch OFF (push button
comes out) if there is a short circuit or a significant overload of the
generator at receptacle.
If an AC circuit protector switches OFF automatically, check that the
appliance is working properly and does not exceed the rated load
capacity of the circuit before resetting the AC circuit protector ON
(pushing the push button in).

11/04/26 16:12:48 32Z30600_032

31

AC RECEPTACLE
No.1

AC RECEPTACLE No.2

AC RECEPTACLE No.3

AC RECEPTACLE No.2

AC RECEPTACLE No.2

AC RECEPTACLE No.3

AC RECEPTACLE
No.1

AC RECEPTACLE No.1

AC CIRCUIT PROTECTOR
(For receptacle No.2)

AC CIRCUIT PROTECTOR
(For receptacle No.2)

AC CIRCUIT PROTECTOR
(For receptacle No.3)

AC CIRCUIT PROTECTOR
(For receptacle No.2)

EG4500CL, EG5500CL: BT type EG4500CL, EG5500CL: FT type

EG4500CL, EG5500CL: ITT type

AC CIRCUIT PROTECTOR
(For receptacle No.3)

11/04/26 16:12:53 32Z30600_033

32

Oil Alert System

Automatic Engine Stop Function

Oil Alert Function

Overspeed Detection Function

Abnormal Voltage Detection Function

The Oil Alert system is designed to prevent engine damage caused by
an insufficient amount of oil in the crankcase. Before the oil level in the
crankcase falls below a safe limit, the Oil Alert system will
automatically shut down the engine (the engine switch will remain in
the ON position).

If the engine stops and will not restart, check the engine oil level (see
page ) before troubleshooting in other areas.

During operation, the engine will automatically stop if there is not
enough oil in the tank. Moreover, if the generator is on a slope, the oil
alert function may operate and stop the engine.

To protect the engine from exceeding the engine load, the engine will
automatically stop if the engine speed becomes abnormal.

The engine will automatically stop during generation when it detects
abnormal voltage.

If the engine stops, inspect the amount of engine oil, and a while, then
try to restart the engine. When the engine will not start at all, take your
generator to the dealer.

18

11/04/26 16:13:02 32Z30600_034

33

STOPPING THE ENGINE7.

IN NORMAL USE:

AC CIRCUIT BREAKER AC CIRCUIT BREAKER

BT typeFT, GT, GWT, ITT types

OOFFFF

OOFFFF

OOFFFF

ENGINE SWITCH

OOFFFF

OOFFFF

OOFFFF

To stop the engine in an emergency, turn the engine switch to the OFF
position.

Switch off the connected equipment and pull off the inserted plug.
Turn the AC circuit breaker to the OFF position.

Turn the engine switch to the OFF position.

1.

2.

3.

11/04/26 16:13:10 32Z30600_035

34

OFF

OOFFFF

FUEL VALVE LEVER

Turn the fuel valve lever to the OFF position.4.

11/04/26 16:13:13 32Z30600_036

35

MAINTENANCE8.

Use Honda Genuine parts or their equivalent. The use of replacement
parts which are not of equivalent quality may damage the generator.

The muffler becomes very hot during operation and remains hot for a
while after stopping the engine. Be careful not to touch the muffler
while it is hot. Let the engine cool before maintenance.

Injury from moving parts. Do not run the engine unless instructed
to do so.

Burns from hot parts. Let the engine and exhaust system cool
before touching.

Carbon monoxide poisoning from engine exhaust. Be sure there is
adequate ventilation whenever you operate the engine.

Make sure the engine is off before you begin any maintenance or
repairs. This will eliminate several potential hazards:

The purpose of the maintenance and adjustment schedule is to keep
the generator in the best operating condition.
Inspect or service as scheduled in the table below.

11/04/26 16:13:21 32Z30600_037

36

Maintenance Schedule

Tools

REGULAR SERVICE PERIOD (3)

ITEM

Performed at every indicated month
or operating hour interval,
whichever comes first.

Page

18
37
21
38
39
40
40
42

Each

use

First

month

or

20 Hrs.

Every

3 months

or

50 Hrs.

Every

6 months

or

100 Hrs.

Every

year

or

300 Hrs.

Engine oil

Air cleaner

Sediment cup
Spark plug

Spark arrester
Valve clearance
Combustion
chamber
Fuel tank and filter
Fuel tube

Check Level
Change
Check
Clean
Clean
Check-adjust
Replace
Clean
Check-adjust
Clean

Clean
Check

After every 1000 Hrs. (2)

Every 2 years (Replace if necessary) (2)

Service more frequently when used in dusty areas.
These items should be serviced by your servicing dealer, unless you have the proper tools
and are mechanically proficient. Refer to the Honda shop manual for service procedures.
For commercial use, log hours of operation to determine proper maintenance intervals.

(1)
(2)

(3)

(1)

(2)

(2)

A box wrench and wrench handle are supplied with the generator.
Use the supplied tools to perform maintenance tasks. Using an
incorrect tool may damage the generator.

11/04/26 16:13:37 32Z30600_038

37

CHANGING OIL1.

UPPER LIMIT

OIL DRAIN BOLTOIL FILLER CAP

SEALING
WASHER

Drain the oil while the engine is still warm to assure rapid and
complete draining.

Remove the oil drain bolt and sealing washer, remove the oil filler
cap, and drain the oil.
Reinstall the drain bolt and new sealing washer. Tighten the bolt
securely.
Refill with the recommended oil (see page ) and check the oil level.

Wash your hands with soap and water after handling used oil.

Please dispose of used motor oil in a manner that is compatible with
the environment. We suggest you take it in a sealed container to your
local service station for reclamation. Do not throw it in the trash or
pour it on the ground.

1.

2.

3. 17

11/04/26 16:13:45 32Z30600_039

38

AIR CLEANER SERVICE

Do not use gasoline or low flash point solvents for cleaning. They are
flammable and explosive under certain conditions.

Never run the engine without the air cleaner element. Rapid engine
wear will result.

2.

CLIP

AIR CLEANER
COVER

AIR CLEANER
ELEMENT

AIR CLEANER
COVER

AIR CLEANER
ELEMENT

AIR CLEANER ELEMENT

CLIP

properly
hooked

improperly
hooked

A dirty air cleaner will restrict air flow to the carburetor. To prevent
carburetor malfunction, service the air cleaner regularly. Service more
frequently when operating the generator in extremely dusty areas.

Reinstall the air cleaner element and the cover.

Soak the air cleaner element in clean engine oil and squeeze out the
excess oil. The engine will smoke during initial startup if too much
oil is left in the air cleaner element.

Wash the air cleaner element in a solution of household detergent
and warm water, then rinse thoroughly, or wash in nonflammable or
high flashpoint solvent. Allow the air cleaner element to dry
thoroughly.

Unsnap the two air cleaner cover clips, remove the air cleaner cover,
and remove the air cleaner element.

1.

2.

3.

4.

11/04/26 16:13:59 32Z30600_040

39

FUEL SEDIMENT CUP SERVICE

Gasoline is extremely flammable and is explosive under certain
conditions. Do not smoke or allow flames or sparks in the area.

After installing the sediment cup, be sure to tighten it securely. Check
for fuel leaks and make sure the area is dry before starting the engine.

3.

SEDIMENT CUP

OFF

FUEL VALVE LEVER

OFF

O-RING
(Replace)

The sediment cup prevents dirt or water that may be in the fuel tank
from entering the carburetor. If the engine has not been run for a long
time, the sediment cup should be cleaned.

Turn the fuel valve lever to the
OFF position. Remove the
sediment cup and O-ring.
Clean the sediment cup in
nonflammable or high flash point
solvent.
Reinstall the new O-ring and
sediment cup.
Turn the fuel valve lever to the ON
position and check for leaks.

Turn the engine switch to the OFF
position.

1.

2.

3.

4.

5.

11/04/26 16:14:09 32Z30600_041

−−

−

−

40

SPARK PLUG SERVICE

If the engine has been running, the muffler will be very hot. Be careful
not to touch the muffler.

Recommended spark plug:

4.

SPARK PLUG WRENCH

SIDE ELECTRODE

SPARK PLUG CAP

SEALING WASHER

0.7 0.8 mm
(0.028 0.031 in)

Visually inspect the spark plug.
Discard it if the insulator is
cracked, chipped, or fouled. Clean
the spark plug with a wire brush if
it is to be reused.
Measure the plug gap with a
feeler gauge.
Correct as necessary by carefully
bending the side electrode.
The gap should be:

To ensure proper engine operation, the spark plug must be properly
gapped and free of deposits.

Remove the spark plug cap.
Clean any dirt from around the spark plug base.
Use a spark plug wrench to remove the spark plug.

BPR5ES (NGK)

1.

2.

3.

4.

5.

0.7 0.8 mm (0.028 0.031 in)

11/04/26 16:14:20 32Z30600_042

41

The spark plug must be securely tightened. An improperly
tightened plug can become very hot and possibly damage the
generator.
Never use a spark plug with an improper heat range.

If installing a new spark plug, tighten 1/2 turn after the spark plug seats
to compress the washer. If reinstalling a used spark plug, tighten 1/8 to
1/4 turn after the spark plug seats.

Make sure that the sealing washer is in good condition, and thread
the spark plug in by hand to prevent cross-threading.
Afterthesparkplugisseated,tightenwithasparkplugwrenchto
compress the washer.

Reinstall the spark plug cap on the spark plug securely.

6.

7.

8.

11/04/26 16:14:27 32Z30600_043

42

SPARK ARRESTER CLEANING

If the generator has been running, the muffler will be very hot.
Allow it to cool before proceeding.

5.

SPARK ARRESTER SCREEN

SPARK ARRESTER5 mm SCREWS

Remove the two 5 mm screws, and remove the spark arrester.

Use a brush to remove carbon deposits from the spark arrester
screen.
Inspect the screen for breaks or tears and replace it if necessary.

Install the spark arrester in the reverse order of removal.

1.

2.

3.

11/04/26 16:14:35 32Z30600_044

43

TRANSPORTING/STORAGE

Do not drive on a rough road for an extended period with the
generator on board. If you must transport the generator on a
rough road, drain the fuel from the generator beforehand.

Avoid a place exposed to direct sunlight when putting the
generator on a vehicle. If the generator is left in an enclosed
vehicle for many hours, high temperature inside the vehicle could
cause fuel to vaporize resulting in a possible explosion.

Do not operate the generator while it is on a vehicle. Take the
generator off the vehicle and use it in a well ventilated place.

Do not overfill the tank.

When transporting the generator:

Transporting

HOLDING PART

9.

The fuel valve lever should be turned OFF.

To prevent fuel spillage when transporting or during temporary
storage, the generator should be secured upright in its normal
operating position, with the engine switch OFF.

To lift up the generator, hold the holding part (shaded areas in the
figure below) with your assistants.

According to EUROPEAN STANDARD EN 12601: 2010

Carrying the generating set is considered that a 140 kg set should be
provided with the means of carrying by 4 persons.

11/04/26 16:14:46 32Z30600_045

44

Take care not to drop or strike the generator when transporting.
Do not place heavy objects on the generator.

When transporting the generator by loading it on to a vehicle, secure
to the generator frame as shown.

11/04/26 16:14:50 32Z30600_046

45

Storage

Gasoline is extremely flammable and is explosive under certain
conditions. Perform this task in a well ventilated area with the engine
stopped. Do not smoke or allow flames or sparks in the area during
this procedure.

SEALING WASHER

DRAIN BOLT

Place a suitable gasoline container below the carburetor, and use a
funnel to avoid spilling fuel.

Remove the drain bolt and sealing washer and drain the gasoline
from the carburetor.

After all the gasoline has drained into the container, tighten the
drain bolt securely.

Place a suitable gasoline container below the sediment cup, and use
a funnel to avoid spilling gasoline.

1.

2.

3.

4.

11/04/26 16:14:58 32Z30600_047

46

Align the notch on the starter pulley
with the hole at the top of recoil starter.

FUEL VALVE LEVER

OONN

ON

Remove the sediment cup (see page ), and then turn the fuel
valve lever to the ON position.

Allow the gasoline to drain completely, and then install the sediment
cup (see page ).

Change the engine oil (refer to page ).

Remove the spark plug, and pour about a tablespoon of clean
engine oil into the cylinder. Turn the engine several revolutions
slowly with the recoil starter to distribute the oil, then reinstall the
spark plug.

Slowly pull the starter grip until resistance is felt. At this point, the
piston is coming up on its compression stroke and both the intake
and exhaust valves are closed. Storing the engine in this position
will help to protect it from internal corrosion.

7.

8.

9.

5.

6.

39

39

37

11/04/26 16:15:06 32Z30600_048

47

TROUBLESHOOTING10.

When the engine will not start:

Is there fuel in
the tank?

Refill the fuel
tank (see page

).

Is the engine
switch ON?

Turn the engine
switch ON (see
page ).

Add the
recommended
oil (see page ).

Is there enough
oil in the engine?

Clean, readjust
gap and dry the
spark plug.
Replace it if
necessary (see
page ).

Is the spark plug
in good
condition?

Clean the fuel
sediment cup
(see page ).

Is the fuel
reaching the
carburetor?

If the engine still
does not start,
take the
generator to an
authorized
Honda dealer.

To check:

Turn off the engine switch and remove the
drain bolt (see page ).
Turn the fuel valve lever to ON. Fuel
should flow from the drain when the fuel
valve lever is turned on.

NO

NO

NO

NO

1)

2)

YES

YES

YES

YES

YES

NO

19

24

17

40

39

45

11/04/26 16:15:20 32Z30600_049

48

No electricity at the AC receptacles:

Is the AC circuit
breaker ON?

Turn the AC circuit
breaker ON (see
page ).

Is the AC circuit
protector ON?

Reset the AC
circuit protector
(see page ).

Check the electrical
appliance or
equipment for any
defects.

Take the generator
to an authorized
Honda dealer.

Replace the
electrical
appliance or
equipment.
Take the
electrical
appliance or
equipment to an
electrical shop
for repair.

YES

NO

DEFECTS

29

30

YES

NO DEFECTS

NO

11/04/26 16:15:28 32Z30600_050

×

×

××

×

49

SPECIFICATIONS11.

Dimensions and Weight

Engine

Generator

EG3600CL

EBGC

GX270

4-stroke, overhead valve, single cylinder

77.0 58.0 mm
(3.03 2.28 in)

Model
Type
Description code
Length
Width
Height
Dry mass [weight]

Model
Engine Type
Displacement
[Bore Stroke]

Compression ratio
Engine speed
Cooling system
Ignition system
Oil capacity
Fuel tank capacity
Spark plug BPR5ES (NGK)

24.0 L (6.34 US gal, 5.28 lmp gal)

1.1L(1.2USqt,1.0lmpqt)

CDI magneto ignition

Forced air

3,000 rpm

8.5:1 8.2:1

88.0 64.0 mm
(3.46 2.52 in)

GX390

EBEC

EG4500CL

BT,FT,GT,GWT,ITT

681 mm (26.8 in)
530 mm (20.9 in)
571 mm (22.5 in)

3.6 kVA

3.2 kVA

50 Hz

230 V 230 V115 V/

230 V

115 V/

230 V

27.8 A/

13.9 A

32.0 A/

17.4 A

13.9 A 17.4 A

3.68 kVA/

4.0 kVA

3.68 kVA/

4.5 kVA

4.0 kVA

4.5 kVA

Model

Type

AC
output

270 cm

(16.5 cu-in) 389 cm (23.7 cu-in)

68.0 kg (149.9 lbs) 79.5 kg (175.3 lbs)

Rated voltage

Rated frequency
Rated current

Rated output

Maximum output

EG3600CL EG4500CL

FT, GT,

GWT, ITT

FT, GT,

GWT, ITT

BT BT

Specifications may vary according to the types, and are subject to
change without notice.

11/04/26 16:15:46 32Z30600_051

×××

50

Dimensions and Weight

Engine

Generator

Model
Type
Description code
Length
Width
Height
Dry mass [weight]

EG5500CL

BT,FT,GT,GWT,ITT

EBBC
681 mm (26.8 in)
530 mm (20.9 in)
571 mm (22.5 in)

82.5 kg (181.9 lbs)

Model
Engine Type
Displacement
[Bore Stroke]
Compression ratio
Engine speed
Cooling system
Ignition system
Oil capacity
Fuel tank capacity
Spark plug

Model
Type

AC
output

GX390

4-stroke, overhead valve, single cylinder

389 cm

(23.7 cu-in)

88.0 64.0 mm (3.46 2.52 in)

8.2:1
3,000 rpm
Forced air

CDI magneto ignition

1.1L(1.2USqt,1.0lmpqt)

24.0 L (6.34 US gal, 5.28 lmp gal)
BPR5ES (NGK)

115 V/230 V 230 V

50 Hz

21.7 A

3.68 kVA/5.0 kVA 5.0 kVA

3.68 kVA/5.5 kVA 5.5 kVA

EG5500CL

BT
Rated voltage
Rated frequency
Rated current
Rated output
Maximum output

FT, GT, GWT, ITT

Specifications may vary according to the types, and are subject to
change without notice.

32.0 A/21.7 A

11/04/26 16:15:59 32Z30600_052

51

Noise

Microphone point

CONTROL
PANEL

Center

1.0 m

1.60 m

BT,FT,GT,GWT,ITT

EG3600CL EG4500CL EG5500CLModel

Type
Sound pressure level at
the workstation
(2006/42/EC)

Uncertainty
Measured sound power level
(2000/14/EC, 2005/88/EC)

Uncertainty
Guaranteed sound power level
(2000/14/EC, 2005/88/EC)

2dB(A) 1dB(A)

79 dB (A)

94 dB (A)

96 dB (A)

95 dB (A) 96 dB (A)

97 dB (A)

81 dB (A)

Specifications are subject to change without notice.

‘‘the figures quoted are emission levels and are not necessarily safe
working levels. Whilst there is a correlation between the emission and
exposure levels, this cannot be used reliably to determine whether or
not further precautions are required. Factors that influence the actual
level of exposure of work-force include the characteristics of the work
room, the other sources of noise, etc. i.e. the number of machines and
other adjacent processes, and the length of time for which an operator
is exposed to the noise. Also the permissible exposure level can vary
from country. This information, however, will enable the user of the
machine to make a better evaluation of the hazard and risk’’.

11/04/26 16:16:11 32Z30600_053

−− −

×

52

INSTALLATION OF KIT PARTS12.

OPTIONAL KIT PARTS

Handle Installation (Two wheel type)

TORQUE:

RIGHT HANDLE
BRACKET

LEFT UPPER HANDLE ASSY RIGHT UPPER HANDLE ASSY

8 16 mm FLANGE BOLT (4)

LEFT HANDLE BRACKET

Install the right and left handles on the generator upper frame using
the handle brackets and four flange bolts.

24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)

11/04/26 16:16:17 32Z30600_054

×

×

−− −

×

×

53

Two Wheel Kit Installation

TORQUE:

WHEEL (2)

8 mm FLANGE NUT (4)

STAND (2)

GENERATOR
SIDE

LONGER

428mm
SPLIT PIN (2)

8 16 mm FLANGE BOLT (8)

AXLE SHAFT

20 mm
PLAIN WASHER (2)

UNDER FRAME

Install the two wheels on the axle shaft using the plain washers and
split pins.

Install the axle assembly on the generator using four 8 16 mm
flange bolts and 8 mm flange nuts.

Install the two stands on the under frame using four 8 16 mm
flange bolts.

24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)

1.

2.

3.

11/04/26 16:16:27 32Z30600_055

×

−− −

×

×

54

Four Wheel Kit Installation

TORQUE:

GENERATOR
SIDE

LONGER

4 28 mm SPLIT PIN (4)

WHEEL (4)

8mm
FLANGE NUT (8)

LOCK PLATE

20 mm PLAIN WASHER (5)

REAR WHEEL SHAFT

FRONT WHEEL SHAFT

8 16 mm FLANGE BOLT (8)

Install the lock plate and four wheels on the wheel shaft using the
plain washers and split pins.

Install the front wheel shaft on the front side nearest the engine.

Install the wheel shaft assembly on the generator using eight 8 16
mm flange bolts.

24 29 N·m (2.4 3.0 kgf·m , 17 22 lbf·ft)

1.

2.

11/04/26 16:16:36 32Z30600_056

＊＊−

＊＊−

＊

＊＊ ＊

55

WIRING DIAGRAM13.

INDEX

ABBREVIATIONS WIRE COLOR CODE

Symbol Part name

AC O
AC CB
CBB
D-AVR

D-CDI
EgB
ESw
EX W
FrB
Fu
FW
GeB
GND
GT
IgC
J/B
MW
OLSw
PoC
SP
VSSw

AC Outlet
AC Circuit Breaker
Control Box Block
Digital-Automatic
Voltage Regulator
Digital-CDI
Engine Block
Engine Switch
Exciter Winding
Frame Block
Fuse
Field Winding
Generator Block
Ground
Ground Terminal
Ignition Coil
Junction Box
Main Winding
Oil Level Switch
Power Coil
Spark Plug
Voltage selector
Switch

Bl

Y

Bu

G

R
W
Br

Lg
Gr
Lb

O

P

BLACK
YELLOW
BLUE
GREEN
RED
WHITE
BROWN
LIGHT GREEN
GRAY
LIGHT BLUE
ORANGE
PINK

(See inside back cover)

.......EG3600CL (BT type): 1·EG4500CL, EG5500CL (BT type): 2 . W 1

.....·EG3600CL (ITT type): 5·EG4500CL, EG5500CL (ITT type): 6 . W 2

EG3600CL (GT, GWT types): 1·EG4500CL, EG5500CL (GT, GWT
types): 2·EG3600CL (FT type): 3·EG4500CL, EG5500CL (FT type): 4

11/04/26 16:16:44 32Z30600_057

56

SWITCH CONNECTIONS

RECEPTACLE

GROUND PIN

GROUND PIN

GROUND PIN

ENGINE SWITCH

OFF
ON

IG DC 12 V

GT, GWT,

ITT

FT

BT, FT, ITT

BT

Type PlugShape

illustration

not available

11/04/26 16:16:56 32Z30600_058

11/04/26 16:16:58 32Z30600_059

11/04/26 16:17:00 32Z30600_060

SCHÉMA DE CABLAGE

DIAGRAMA DE CONEXIONES

WIRING DIAGRAM

SCHALTPLAN

11/04/26 16:17:05 32Z30600_061

−

＊

＊

W1

1

2

11/04/26 16:17:18 32Z30600_062

−

＊＊

＊＊

＊

＊

W2

12

34

5

6

11/04/26 16:17:31 32Z30600_063

11/04/26 16:17:33 32Z30600_064

Pour plus d’informations, s’adresser au Centre d’informations clients Honda à
l’adresse ou numéro de téléphone suivants:

Para obtener más información, póngase en contacto con el Centro de
información para clientes Honda en la dirección o número de teléfono siguientes:

ADRESSES DES PRINCIPAUX CONCESSIONNAIRES Honda

DIRECCIONES DE LOS PRINCIPLES CONCESIONARIOS Honda

MAJOR Honda DISTRIBUTOR ADDRESSES

ADRESSEN DER WICHTIGSTEN Honda-HAUPTHÄNDLER

For further information, please contact Honda Customer Information
Centre at the following address or telephone number:

Weitere Informationen erhalten Sie gerne vom Honda­Kundeninformationszentrum unter der folgenden Adresse oder
Telefonnummer:

11/04/26 16:17:41 32Z30600_065

＋

＋

＋

＋

＠

＋

＋

＠

＋

＋

＠

−

＋

＋

＠

＋

＋

＋

＋

＋

＋

＋

＋

＠

＋

＋

＠

＋

＋

＠

AUSTRIA

BALTIC STATES
(Estonia/Latvia/

Lithuania)

BELGIUM

BULGARIA

CROATIA

CYPRUS

CZECH REPUBLIC

DENMARK

FINLAND

FRANCE

GERMANY

GREECE

Honda Motor Europe (North)

Honda Motor Europe Ltd.

Honda Motor Europe (North)

Kirov Ltd.

Hongoldonia d.o.o.

Alexander Dimitriou & Sons Ltd.

BG Technik cs, a.s.

Tima Products A/S

OY Brandt AB.

Honda Relations Clients

Honda Motor Europe (North)

GmbH

General Automotive Co S.A.

Hondastraße 1

2351 Wiener Neudorf

Tel. : [phone]

Fax : [phone]

http://www.honda.at

Estonian Branch

Tulika 15/17

10613 Tallinn

Tel. : [phone]

Fax : [phone]

honda.baltic honda-eu.

com.

Doornveld 180-184

1731 Zellik

Tel. : [phone]

Fax : [phone]

http://www.honda.be

BH_PE HONDA-EU.COM

49 Tsaritsa Yoana blvd

1324 Sofia

Tel.: [phone]

Fax : [phone]

http://www.kirov.net

honda kirov.net

Jelkovecka Cesta 5

10360 Sesvete Zagreb

Tel. : [phone]

Fax : [phone]

http://www.hongoldonia.hr

jure hongoldonia.hr

162, Yiannos Kranidiotis Avenue

2235 Latsia, Nicosia

Tel. : [phone]

Fax : [phone]

U Zavodiste 251/8

15900 Prague 5 - Velka

Chuchle

Tel. : [phone]

Fax : [phone]

http://www.honda-stroje.cz

Tårnfalkevej 16

2650 Hvidovre

Tel.: [phone]

Fax: [phone]

http://www.tima.dk

Tuupakantie 7B

01740 Vantaa

Tel. : [phone]

Fax : [phone]

http://www.brandt.fi

TSA 80627

45146 St Jean de la Ruelle Cedex

Tel.:[phone]

Fax:[phone]

http://www.honda-fr.com

espaceclient honda-eu.com

Sprendlinger Landstraße 166

63069 Offenbach am Main

Tel. : [phone]

Fax : [phone]

http://www.honda.de

info post.honda.de

71 Leoforos Athinon

10173 Athens

Tel. : [phone]

Fax : [phone]

http://www.honda.gr

info saracakis.gr

11/04/26 16:17:57 32Z30600_066

＋

＋

＠

＋

＋

＋

＋

＠

＋

＋

＋

＋ ＋

＋

＋

＋

＠

＋

＋

＠

＋

＋

＠

＋

＋

＠

＋

＋

＠

＋

＋

＠

HUNGARY MALTA PORTUGAL

NETHERLANDSICELAND REPUBLIC OF

BELARUS

NORWAYIRELAND ROMANIA

POLANDITALY RUSSIA

Motor Pedo Co., Ltd. The Associated Motors

Company Ltd.

Honda Portugal, S.A.

Honda Motor Europe (North)Bernhard ehf.

Scanlink Ltd.

Berema ASTwo Wheels ltd Hit Power Motor Srl

Aries Power Equipment Sp. z o.o.Honda Italia Industriale S.p.A. Honda Motor RUS LLC

Kamaraerdei ut 3.

2040 Budaors

Tel. : [phone]

Fax : [phone]

http://www.hondakisgepek.hu

info hondakisgepek.hu

New Street in San Gwakkin Road

Mriehel Bypass, Mriehel QRM17

Tel. : [phone]

Fax : [phone]

RuaFontesPereiradeMelo16

Abrunheira, 2714-506 Sintra

Tel. : [phone]

Fax : [phone]

http://www.honda.pt

honda.produtos honda-eu.

com

Afd. Power Equipment-

Capronilaan 1

1119 NN Schiphol-Rijk

Tel. : [phone]

Fax : [phone]

http://www.honda.nl

Vatnagardar 24-26

104 Reykdjavik

Tel. : [phone]

Fax : [phone]

http://www.honda.is

Kozlova Drive, 9

220037 Minsk

Tel. : [phone]

Fax : [phone]

http://www.hondapower.by

P.O. Box 454

1401 Ski

Tel.: [phone]

Fax: [phone]

http://www.berema.no

berema berema.no

M50 Business Park, Ballymount

Dublin 12

Tel. : [phone]

Fax : [phone]

http://www.hondaireland.ie

Service hondaireland.ie

Calea Giulesti N° 6-8 Sector 6

060274 Bucuresti

Tel. : [phone]

Fax : [phone]

http://www.honda.ro

hit_power honda.ro

ul. Wroclawska 25

01-493 Warszawa

Tel. : [phone]

Fax : [phone]

http://www.ariespower.pl

http://www.mojahonda.pl

info ariespower.pl

Via della Cecchignola, 5/7

00143 Roma

Tel. : [phone]

Fax : [phone]

http://www.hondaitalia.com

info.power honda-eu.com

21. MKAD 47 km., Leninsky district.

Moscow region, 142784 Russia

Tel. : [phone]

Fax : [phone]

http://www.honda.co.ru

postoffice honda.co.ru

11/04/26 16:18:13 32Z30600_067

＋

＋

＋

＋

＠

＠

＋

＋

＠

＋

＋

＋

＋

＋

＋

＋

＋

＠

＋

＋

＋

＋

＋

＠

SERBIA &

MONTENEGRO

Tenerife province

SWEDEN

SWITZERLAND

SPAIN &

Las Palmas province

SLOVAKIA REPUBLIC

UKRAINE

UNITED KINGDOM

SLOVENIA AUSTRALIA

TURKEY

Bazis Grupa d.o.o.

(Canary Islands)

Automocion Canarias S.A.

Honda Nordic AB

Honda Suisse S.A.

(Canary Islands)

Greens Power Products, S.L.

Honda Slovakia, spol. s r.o.

Honda Ukraine LLC

Honda (UK) Power Equipment

AS Domzale Moto Center D.O.O. Honda Australia Motorcycle and

Power Equipment Pty. Ltd

Anadolu Motor Uretim ve

Pazarlama AS

Grcica Milenka 39

11000 Belgrade

Tel. : [phone]

Fax : [phone]

http://www.hondasrbija.co.rs

Carretera General del Sur, KM. 8,8

38107 Santa Cruz de Tenerife

Tel. : [phone]

Fax : [phone]

http://www.aucasa.com

ventas aucasa.com

taller aucasa.com

Box 50583 - Västkustvägen 17

20215 Malmö

Tel. : [phone]

Fax : [phone]

http://www.honda.se

hpesinfo honda-eu.com

10, Route des Moulières

1214 Vemier - Genève

Tel. : [phone]

Fax : [phone]

http://www.honda.ch

Poligono Industrial Congost -

Av Ramon Ciurans n°2

08530 La Garriga - Barcelona

Tel. : [phone]

Fax : [phone]

http://www.hondaencasa.com

Prievozská 6 821 09 Bratislava

Tel. : [phone]

Fax : [phone]

http://www.honda.sk

101 Volodymyrska Str. - Build. 2

Kyiv 01033

Tel. : [phone]

Fax : [phone]

http://www.honda.ua

CR honda.ua

470 London Road

Slough - Berkshire, SL3 8QY

Tel. : [phone]

http://www.honda.co.uk

Blatnica 3A

1236 Trzin

Tel. : [phone]

Fax : [phone]

http://www.as-domzale-motoc.si

1954-1956 Hume Highway

Campbellfield Victoria 3061

Tel. : [phone]

Fax : [phone]

Esentepe mah. Anadolu

Cad. No: 5

Kartal 34870 Istanbul

Tel. : [phone]

Fax : [phone]

http://www.anadolumotor.com.tr

antor antor.com.tr

11/04/26 16:18:27 32Z30600_068

Français. (French)

Déclaration CE de Conformité

1. Le sous signé, Piet Renneboog, de la part du
représentant autorisé, déclare que la machine décrit
ci-dessous répond à toutes les dispositions
applicables de
* Directive Machine 2006/42/CE
* Directive 2004/108/CE sur la compatibilité
électromagnétique
* Directive 2000/14/CE - 2005/88/CE des émissions
sonores dans l'environnement des matériels
destinés à être utilisé à l'extérieur des batiments

2. Description de la machine
a) Denomination générique : Générateur
b) Fonction : produire du courant électrique
c) Nom Commercial d) Type
e) Numéro de série

3. Constructeur

4. Représentant autorisé

5. Référence aux normes harmonisées

6. Autres normes et spécifications

7. Directive des émissions sonores dans
l'environnement des matériels destinés à être utilisé
à l'extérieur des batiments
a) Puissance accoustique mesurée
b) Puissance accoustique garantie
c) Paramétre du bruit
d) Procédure d'évaluation de conformité
e) Organisme notifié

8. Fait à 9. Date

Italiano (Italian)

Dichiarazione CE di Conformità

1. Il sottoscritto, Piet Renneboog, in qualità di
rappresentante autorizzato, dichiara qui di seguito
che la macchina sotto descritta soddisfa tutte le
disposizioni pertinenti delle:
* Direttiva macchine 2006/42/CE
* Direttiva sulla compatibilità elettromagnetica
2004/108/CE
* Direttiva sulla emissione acustica delle macchine e
attrezzature destinate a funzionare all'aperto
2000/14/CE - 2005/88/CE

2. Descrizione della macchina
a) Denominazione generica : Generatore
b) Funzione : Produzione di energia elettrica
c) Denominazione commerciale d) Tipo
e) Numero di serie

3. Costruttore

4. Rappresentante Autorizzato

5. Riferimento agli standard armonizzati

6. Altri standard o specifiche

7. Direttiva sulla emissione acustica delle macchine
e attrezzature destinate a funzionare all'aperto
a) Livello di potenza sonora misurato
b) Livello di potenza sonora garantito
c) Parametri emissione acustica
d) Procedura di valutazione della conformità
e) Organismo notificato

8. Fatto a 9. Data

Deutsch (German)

EG-Konformitätserklärung

1. Der Unterzeichner, Piet Renneboog erklärt hiermit
im Namen der Bevollmächtigten, dass das hierunter
genannte Maschine allen einschlägigen
Bestimmungen der * entspricht.
* Maschinenrichtlinie 2006/42/EG
* Richtlinie der Elektromagnetischen Kompatibilität
2004/108/EG
* Geräuschrichtlinie im Freien 2000/14EG -
2005/88/EG

2. Beschreibung der Maschine
a) Allgemeine Bezeichnung : Stromerzeuger
b) Funktion : Strom produzieren
c) Handelsbezeichnung d) Typ
e) Seriennummer

3. Hersteller

4. Bevollmächtigter

5. Verweis auf harmonisierte Normen

6. Andere Normen oder Spezifikationen

7. Geräuschrichtlinie im Freien
a) gemessene Lautstärke
b) Schalleistungspegel
c) Geräuschvorgabe
d) Konformitätsbewertungs Ablauf
e) Benannte Stelle

8. Ort 9. Datum

Nederlands (Dutch)

EG-verklaring van overeenstemming

1. Ondergetekende, Piet Renneboog, in naam van
de gemachtigde van de fabrikant, verklaart hiermee
dat het hieronder beschreven machine voldoet aan
alle toepasselijke bepalingen van :
* Richtlijn 2006/42/EG betreffende machines
* Richtlijn 2004/108/EG betreffende
elektromagnetische overeenstemming
* Richtlijn 2000/14/EG - 2005/88/EG betreffende
geluidsemissie (openlucht)

2. Beschrijving van de machine
a) Algemene benaming : Generator
b) Functie : elektriciteit produceren
c) Handelsbenaming d) Type
e) Serienummer

3. Fabrikant

4. Gemachtigde van de fabrikant

5. Refereert naar geharmoniseerde normen

6. Andere normen of specificaties

7. Geluidsemissierichtlijn (openlucht)
a) Gemeten geluidsvermogensniveau
b) Gewaarborgd geluidsvermogensniveau
c) Geluidsparameter
d) Conformiteitsbeoordelingsprocedure
e) Aangemelde instantie

8. Plaats 9. Datum

Dansk ( Danish )

EF OVERENSTEMMELSEERKLÆRING

1. UNDERTEGNEDE, PIET RENNEBOOG, PÅ
VEGNE AF DEN AUTORISEREDE
REPRÆSETANT, ERKLÆRER HERMED AT
MASKINEN, SOM ER BESKREVET NEDENFOR,
OPFYLDER ALLE RELEVANTE BESTEMMELSER
IFØLGE:
* MASKINDIREKTIV 2006/42/EF
* EMC-DIREKTIV 2004/108/EF
* DIREKTIV OM STØJEMISSION 2000/14/EF -
2005/88/EF

2. BESKRIVELSE AF PRODUKTET
a) FÆLLESBETEGNELSE : Generator
b) ANVENDELSE : Produktion af elektricitet
c) HANDELSBETEGNELSE d) TYPE
e) SERIENUMMER

3. PRODUCENT

4. AUTORISERET REPRÆSENTANT

5. REFERENCE TIL HARMONISEREDE
STANDARDER

6. ANDRE STANDARDER ELLER
SPEFIFIKATIONER

7. DIREKTIV OM STØJEMISSION FRA MASKINER
TIL UDENDØRS BRUG
a) MÅLT LYDEFFEKTNIVEAU
b) GARANTERET LYDEFFEKTNIVEAU
c) STØJPARAMETER
d) PROCEDURE FOR
OVERENSSTEMMELSESVURDERING
e) BEMYNDIGET ORGAN

8. STED 9. DATO

Ελληνικά (Greek)

EK-Δήλωση συμμόρφωσης

1. Ο κάτωθι υπογεγραμμένος ,Piet Renneboog, εκ

μέρους του εξουσιοδοτημένου αντιπροσώπου με το
παρών δηλώνω ότι το παρακάτω περιγραφόμενο
όχημα πληροί όλες τις σχετικές προδιαγραφές του:

* Οδηγία 2006/42/ΕΚ για μηχανές
* Οδηγία 2004/108/ΕΚ για την ηλεκτρομαγνητική
συμβατότητα
* Οδηγία 2000/14/ΕΚ - 2005/88/EK για το επίπεδο
θορύβου σε εξωτερικούς χώρους.

2. Περιγραφή μηχανήματος
a) Γενική ονομασία : Ηλεκτοπαραγωγό ζεύγος
b) Λειτουργία : για παραγωγή ηλεκτρικής ενέργειας
c) Εμπορική ονομασία d) Τύπος
e) Αριθμός σειράς παραγωγής

3. Κατασκευαστής

4. Εξουσιοδοτημένος αντιπρόσωπος

5. Αναφορά σε εναρμονισμένα πρότυπα

6. Λοιπά πρότυπα ή προδιαγραφές

7. Οδηγία επιπέδου θορύβου εξωτερικών χώρων
a) Μετρηθείσα ηχητική

ένταση
b) Εγγυημένη ηχητική ένταση
c) Ηχητική παράμετρος
d) Διαδικασία πιστοποίησης
e) Οργανισμόςπιστοποίησης

8. Η δοκιμή έγινε 9. Ημερομηνία

Svenska ( Swedish )

EG-försäkran om överensstämmelse

1. Undertecknad, Piet Rennebog, på uppdrag av
auktoriserad representant, deklarerar härmed att
maskinen beskriven nedan fullföljer alla relevanta
bestämmelser enl :
* Direktiv 2006/42/EG gällande maskiner
* Direktiv 2004/108/EG gällande elektromagnetisk
kompatibilitet
* Direktiv 2000/14//EG - 2005/88/EG gällande buller
utomhus

2. Maskinbeskrivning
a) Allmän benämning : Elverk
b) Funktion : producera el
c) Och varunamn d) Typ
e) Serienummer

3. Tillverkare

4. Auktoriserad representant

5. referens till överensstämmande standarder

6. Andra standarder eller specifikationer

7. Direktiv för buller utomhus
a) Uppmätt ljudnivå
b) Garanterad ljudnivå
c) Buller parameter
d) Förfarande för bedömning
e) Anmälda organ

8. Utfärdat vid 9. Datum

Español (Spanish)

Declaración de Conformidad CE

1. El abajo firmante, Piet Renneboog, en
representación del representante autorizado,
adjunto declara que la máquina abajo descrita,
cumple las cláusulas relevantes de:
* Directiva 2006/42/CE de maquinaria
* Directiva 2004/108/CE de compatibilidad
electromagnética
* Directiva 2000/14/CE - 2005/88/CE de ruido
exterior

2. Descripción de la máquina
a) Denominación genérica : Generador
b) Función : Producción de electricidad
c) Denominación comercial d) Tipo
e) Número de serie

3. Fabricante

4. Representante autorizado

5. Referencia de los estándar harmonizados

6. Otros estándar o especificaciones

7. Directiva sobre ruido exterior
a)Potencia sonora Medida
b) Potencia sonora Garantizada
c) Parámetros ruido
d) Procedimiento evaluación conformidad
e) Organismo notificado

8. Realizado en 9. Fecha

Română (Romanian)

CE -Declaratie de Conformitate

1. Subsemnatul Piet Renneboog, in numele
reprezentantului autorizat, declar prin prezenta
faptul ca echipamentul descris mai jos indeplineste
toate conditiile necesare din:
* Directiva 2006/42/CE privind echipamentul
* Directiva 2004/108/CE privind compatibilitatea
electromagnetica
* Directiva 2000/14/CE - 2005/88/CE privind
poluarea fonica in spatiu deschis

2. Descrierea echipamentului
a) Denumire generica : Motogenerator electric
b) Domeniu de utilizare : generarea energiei
electrice
c) Denumire comercialad) Tip
e) Serie produs

3. Producator

4. Reprezentantul Autorizat

5. Referinta la standardele armonizate

6. Alte standarde sau norme

7. Directiva privind poluarea fonica in spatiu inchis
a) Puterea acustica masurata
b) Putere acustica maxim garantata
c) Indice poluare fonica
d) Procedura de evaluare a conformitatii
e) Notificari

8. Emisa la 9. Data

EC Declaration of Conformity

1. The undersigned, Piet Renneboog, on behalf of the authorized representative, herewith declares that
the machinery described below fulfils all the relevant provisions of:

• Directive 2006/42/EC on machinery

• Directive 2004/108/EC on electromagnetic compatibility

• Directive 2000/14/EC – 2005/88/EC on outdoor noise

2. Description of the machinery

a) Generic denomination: Generating sets
b) Function: producing electrical power
c) Commercial name d) Type e) Serial number
*1 *1

3. Manufacturer
Honda Mindong Generator Co. Ltd.
No.7, Houyu Road Fuxing Economic
Development Zone,
Fuzhou City, Fujian Province. P.R.

China

4. Authorized representative
Honda Motor Europe Ltd. Aalst Office
Wijngaardveld 1 (Noord V),
9300 Aalst – BELGIUM

5. References to harmonized standards 6. Other standards or specifications
EN 12601:2010 -

7. Outdoor noise Directive

a) Measured sound power dB(A): *1
b) Guaranteed sound power dB(A): *1
c) Noise parameter: *1
d) Conformity assessment procedure: ANNEX Ⅵ
e) Notified body: VINCOTTE Environment
Jan Olieslagerslaan 35

B-1800 Vilvoorde BELGIUM

8. Done at: Aalst , BELGIUM

9. Date:

__________________
Piet Renneboog
Homologation Manager
Honda Motor Europe, Ltd., Aalst Office

Français. (French)

Déclaration CE de Conformité

1. Le sous signé, Piet Renneboog, de la part du
représentant autorisé, déclare que la machine décrit
ci-dessous répond à toutes les dispositions
applicables de
* Directive Machine 2006/42/CE
* Directive 2004/108/CE sur la compatibilité
électromagnétique
* Directive 2000/14/CE - 2005/88/CE des émissions
sonores dans l'environnement des matériels
destinés à être utilisé à l'extérieur des batiments

2. Description de la machine
a) Denomination générique : Générateur
b) Fonction : produire du courant électrique
c) Nom Commercial d) Type
e) Numéro de série

3. Constructeur

4. Représentant autorisé

5. Référence aux normes harmonisées

6. Autres normes et spécifications

7. Directive des émissions sonores dans
l'environnement des matériels destinés à être utilisé
à l'extérieur des batiments
a) Puissance accoustique mesurée
b) Puissance accoustique garantie
c) Paramétre du bruit
d) Procédure d'évaluation de conformité
e) Organisme notifié

8. Fait à 9. Date

Nederlands (Dutch)

EG-verklaring van overeenstemming

1. Ondergetekende, Piet Renneboog, in naam van
de gemachtigde van de fabrikant, verklaart hiermee
dat het hieronder beschreven machine voldoet aan
alle toepasselijke bepalingen van :
* Richtlijn 2006/42/EG betreffende machines
* Richtlijn 2004/108/EG betreffende
elektromagnetische overeenstemming
* Richtlijn 2000/14/EG - 2005/88/EG betreffende
geluidsemissie (openlucht)

2. Beschrijving van de machine
a) Algemene benaming : Generator
b) Functie : elektriciteit produceren
c) Handelsbenaming d) Type
e) Serienummer

3. Fabrikant

4. Gemachtigde van de fabrikant

5. Refereert naar geharmoniseerde normen

6. Andere normen of specificaties

7. Geluidsemissierichtlijn (openlucht)
a) Gemeten geluidsvermogensniveau
b) Gewaarborgd geluidsvermogensniveau
c) Geluidsparameter
d) Conformiteitsbeoordelingsprocedure
e) Aangemelde instantie

8. Plaats 9. Datum

Svenska ( Swedish )

EG-försäkran om överensstämmelse

1. Undertecknad, Piet Rennebog, på uppdrag av
auktoriserad representant, deklarerar härmed att
maskinen beskriven nedan fullföljer alla relevanta
bestämmelser enl :
* Direktiv 2006/42/EG gällande maskiner
* Direktiv 2004/108/EG gällande elektromagnetisk
kompatibilitet
* Direktiv 2000/14//EG - 2005/88/EG gällande buller
utomhus

2. Maskinbeskrivning
a) Allmän benämning : Elverk
b) Funktion : producera el
c) Och varunamn d) Typ
e) Serienummer

3. Tillverkare

4. Auktoriserad representant

5. referens till överensstämmande standarder

6. Andra standarder eller specifikationer

7. Direktiv för buller utomhus
a) Uppmätt ljudnivå
b) Garanterad ljudnivå
c) Buller parameter
d) Förfarande för bedömning
e) Anmälda organ

8. Utfärdat vid 9. Datum

DOC_FMH_出力用.indd 1 11/04/14 16:13

Français. (French)

Déclaration CE de Conformité

1. Le sous signé, Piet Renneboog, de la part du
représentant autorisé, déclare que la machine décrit
ci-dessous répond à toutes les dispositions
applicables de
* Directive Machine 2006/42/CE
* Directive 2004/108/CE sur la compatibilité
électromagnétique
* Directive 2000/14/CE - 2005/88/CE des émissions
sonores dans l'environnement des matériels
destinés à être utilisé à l'extérieur des batiments

2. Description de la machine
a) Denomination générique : Générateur
b) Fonction : produire du courant électrique
c) Nom Commercial d) Type
e) Numéro de série

3. Constructeur

4. Représentant autorisé

5. Référence aux normes harmonisées

6. Autres normes et spécifications

7. Directive des émissions sonores dans
l'environnement des matériels destinés à être utilisé
à l'extérieur des batiments
a) Puissance accoustique mesurée
b) Puissance accoustique garantie
c) Paramétre du bruit
d) Procédure d'évaluation de conformité
e) Organisme notifié

8. Fait à 9. Date

Italiano (Italian)

Dichiarazione CE di Conformità

1. Il sottoscritto, Piet Renneboog, in qualità di
rappresentante autorizzato, dichiara qui di seguito
che la macchina sotto descritta soddisfa tutte le
disposizioni pertinenti delle:
* Direttiva macchine 2006/42/CE
* Direttiva sulla compatibilità elettromagnetica
2004/108/CE
* Direttiva sulla emissione acustica delle macchine e
attrezzature destinate a funzionare all'aperto
2000/14/CE - 2005/88/CE

2. Descrizione della macchina
a) Denominazione generica : Generatore
b) Funzione : Produzione di energia elettrica
c) Denominazione commerciale d) Tipo
e) Numero di serie

3. Costruttore

4. Rappresentante Autorizzato

5. Riferimento agli standard armonizzati

6. Altri standard o specifiche

7. Direttiva sulla emissione acustica delle macchine
e attrezzature destinate a funzionare all'aperto
a) Livello di potenza sonora misurato
b) Livello di potenza sonora garantito
c) Parametri emissione acustica
d) Procedura di valutazione della conformità
e) Organismo notificato

8. Fatto a 9. Data

Deutsch (German)

EG-Konformitätserklärung

1. Der Unterzeichner, Piet Renneboog erklärt hiermit
im Namen der Bevollmächtigten, dass das hierunter
genannte Maschine allen einschlägigen
Bestimmungen der * entspricht.
* Maschinenrichtlinie 2006/42/EG
* Richtlinie der Elektromagnetischen Kompatibilität
2004/108/EG
* Geräuschrichtlinie im Freien 2000/14EG ­2005/88/EG

2. Beschreibung der Maschine
a) Allgemeine Bezeichnung : Stromerzeuger
b) Funktion : Strom produzieren
c) Handelsbezeichnung d) Typ
e) Seriennummer

3. Hersteller

4. Bevollmächtigter

5. Verweis auf harmonisierte Normen

6. Andere Normen oder Spezifikationen

7. Geräuschrichtlinie im Freien
a) gemessene Lautstärke
b) Schalleistungspegel
c) Geräuschvorgabe
d) Konformitätsbewertungs Ablauf
e) Benannte Stelle

8. Ort 9. Datum

Nederlands (Dutch)

EG-verklaring van overeenstemming

1. Ondergetekende, Piet Renneboog, in naam van
de gemachtigde van de fabrikant, verklaart hiermee
dat het hieronder beschreven machine voldoet aan
alle toepasselijke bepalingen van :
* Richtlijn 2006/42/EG betreffende machines
* Richtlijn 2004/108/EG betreffende
elektromagnetische overeenstemming
* Richtlijn 2000/14/EG - 2005/88/EG betreffende
geluidsemissie (openlucht)

2. Beschrijving van de machine
a) Algemene benaming : Generator
b) Functie : elektriciteit produceren
c) Handelsbenaming d) Type
e) Serienummer

3. Fabrikant

4. Gemachtigde van de fabrikant

5. Refereert naar geharmoniseerde normen

6. Andere normen of specificaties

7. Geluidsemissierichtlijn (openlucht)
a) Gemeten geluidsvermogensniveau
b) Gewaarborgd geluidsvermogensniveau
c) Geluidsparameter
d) Conformiteitsbeoordelingsprocedure
e) Aangemelde instantie

8. Plaats 9. Datum

Dansk ( Danish )

EF OVERENSTEMMELSEERKLÆRING

1. UNDERTEGNEDE, PIET RENNEBOOG, PÅ
VEGNE AF DEN AUTORISEREDE
REPRÆSETANT, ERKLÆRER HERMED AT
MASKINEN, SOM ER BESKREVET NEDENFOR,
OPFYLDER ALLE RELEVANTE BESTEMMELSER
IFØLGE:
* MASKINDIREKTIV 2006/42/EF
* EMC-DIREKTIV 2004/108/EF
* DIREKTIV OM STØJEMISSION 2000/14/EF ­2005/88/EF

2. BESKRIVELSE AF PRODUKTET
a) FÆLLESBETEGNELSE : Generator
b) ANVENDELSE : Produktion af elektricitet
c) HANDELSBETEGNELSE d) TYPE
e) SERIENUMMER

3. PRODUCENT

4. AUTORISERET REPRÆSENTANT

5. REFERENCE TIL HARMONISEREDE
STANDARDER

6. ANDRE STANDARDER ELLER
SPEFIFIKATIONER

7. DIREKTIV OM STØJEMISSION FRA MASKINER
TIL UDENDØRS BRUG
a) MÅLT LYDEFFEKTNIVEAU
b) GARANTERET LYDEFFEKTNIVEAU
c) STØJPARAMETER
d) PROCEDURE FOR
OVERENSSTEMMELSESVURDERING
e) BEMYNDIGET ORGAN

8. STED 9. DATO

Ελληνικά (Greek)

EK-Δήλωση συμμόρφωσης

1. Ο κάτωθι υπογεγραμμένος ,Piet Renneboog, εκ

μέρους του εξουσιοδοτημένου αντιπροσώπου με το
παρών δηλώνω ότι το παρακάτω περιγραφόμενο
όχημα πληροί όλες τις σχετικές προδιαγραφές του:

* Οδηγία 2006/42/ΕΚ για μηχανές
* Οδηγία 2004/108/ΕΚ για την ηλεκτρομαγνητική
συμβατότητα
* Οδηγία 2000/14/ΕΚ - 2005/88/EK για το επίπεδο
θορύβου σε εξωτερικούς χώρους.

2. Περιγραφή μηχανήματος
a) Γενική ονομασία : Ηλεκτοπαραγωγό ζεύγος
b) Λειτουργία : για παραγωγή ηλεκτρικής ενέργειας
c) Εμπορική ονομασία d) Τύπος
e) Αριθμός σειράς παραγωγής

3. Κατασκευαστής

4. Εξουσιοδοτημένος αντιπρόσωπος

5. Αναφορά σε εναρμονισμένα πρότυπα

6. Λοιπά πρότυπα ή προδιαγραφές

7. Οδηγία επιπέδου θορύβου εξωτερικών χώρων
a) Μετρηθείσα ηχητική ένταση
b) Εγγυημένη ηχητική ένταση
c) Ηχητική παράμετρος
d) Διαδικασία πιστοποίησης
e) Οργανισμόςπιστοποίησης

8. Η δοκιμή έγινε 9. Ημερομηνία

Svenska ( Swedish )

EG-försäkran om överensstämmelse

1. Undertecknad, Piet Rennebog, på uppdrag av
auktoriserad representant, deklarerar härmed att
maskinen beskriven nedan fullföljer alla relevanta
bestämmelser enl :
* Direktiv 2006/42/EG gällande maskiner
* Direktiv 2004/108/EG gällande elektromagnetisk
kompatibilitet
* Direktiv 2000/14//EG - 2005/88/EG gällande buller
utomhus

2. Maskinbeskrivning
a) Allmän benämning : Elverk
b) Funktion : producera el
c) Och varunamn d) Typ
e) Serienummer

3. Tillverkare

4. Auktoriserad representant

5. referens till överensstämmande standarder

6. Andra standarder eller specifikationer

7. Direktiv för buller utomhus
a) Uppmätt ljudnivå
b) Garanterad ljudnivå
c) Buller parameter
d) Förfarande för bedömning
e) Anmälda organ

8. Utfärdat vid 9. Datum

Español (Spanish)

Declaración de Conformidad CE

1. El abajo firmante, Piet Renneboog, en
representación del representante autorizado,
adjunto declara que la máquina abajo descrita,
cumple las cláusulas relevantes de:
* Directiva 2006/42/CE de maquinaria
* Directiva 2004/108/CE de compatibilidad
electromagnética
* Directiva 2000/14/CE - 2005/88/CE de ruido
exterior

2. Descripción de la máquina
a) Denominación genérica : Generador
b) Función : Producción de electricidad
c) Denominación comercial d) Tipo
e) Número de serie

3. Fabricante

4. Representante autorizado

5. Referencia de los estándar harmonizados

6. Otros estándar o especificaciones

7. Directiva sobre ruido exterior
a)Potencia sonora Medida
b) Potencia sonora Garantizada
c) Parámetros ruido
d) Procedimiento evaluación conformidad
e) Organismo notificado

8. Realizado en 9. Fecha

Română (Romanian)

CE -Declaratie de Conformitate

1. Subsemnatul Piet Renneboog, in numele
reprezentantului autorizat, declar prin prezenta
faptul ca echipamentul descris mai jos indeplineste
toate conditiile necesare din:
* Directiva 2006/42/CE privind echipamentul
* Directiva 2004/108/CE privind compatibilitatea
electromagnetica
* Directiva 2000/14/CE - 2005/88/CE privind
poluarea fonica in spatiu deschis

2. Descrierea echipamentului
a) Denumire generica : Motogenerator electric
b) Domeniu de utilizare : generarea energiei
electrice
c) Denumire comercialad) Tip
e) Serie produs

3. Producator

4. Reprezentantul Autorizat

5. Referinta la standardele armonizate

6. Alte standarde sau norme

7. Directiva privind poluarea fonica in spatiu inchis
a) Puterea acustica masurata
b) Putere acustica maxim garantata
c) Indice poluare fonica
d) Procedura de evaluare a conformitatii
e) Notificari

8. Emisa la 9. Data

Français. (French)

Déclaration CE de Conformité

1. Le sous signé, Piet Renneboog, de la part du
représentant autorisé, déclare que la machine décrit
ci-dessous répond à toutes les dispositions
applicables de
* Directive Machine 2006/42/CE
* Directive 2004/108/CE sur la compatibilité
électromagnétique
* Directive 2000/14/CE - 2005/88/CE des émissions
sonores dans l'environnement des matériels
destinés à être utilisé à l'extérieur des batiments

2. Description de la machine
a) Denomination générique : Générateur
b) Fonction : produire du courant électrique
c) Nom Commercial d) Type
e) Numéro de série

3. Constructeur

4. Représentant autorisé

5. Référence aux normes harmonisées

6. Autres normes et spécifications

7. Directive des émissions sonores dans
l'environnement des matériels destinés à être utilisé
à l'extérieur des batiments
a) Puissance accoustique mesurée
b) Puissance accoustique garantie
c) Paramétre du bruit
d) Procédure d'évaluation de conformité
e) Organisme notifié

8. Fait à 9. Date

Italiano (Italian)

Dichiarazione CE di Conformità

1. Il sottoscritto, Piet Renneboog, in qualità di
rappresentante autorizzato, dichiara qui di seguito
che la macchina sotto descritta soddisfa tutte le
disposizioni pertinenti delle:
* Direttiva macchine 2006/42/CE
* Direttiva sulla compatibilità elettromagnetica
2004/108/CE
* Direttiva sulla emissione acustica delle macchine e
attrezzature destinate a funzionare all'aperto
2000/14/CE - 2005/88/CE

2. Descrizione della macchina
a) Denominazione generica : Generatore
b) Funzione : Produzione di energia elettrica
c) Denominazione commerciale d) Tipo
e) Numero di serie

3. Costruttore

4. Rappresentante Autorizzato

5. Riferimento agli standard armonizzati

6. Altri standard o specifiche

7. Direttiva sulla emissione acustica delle macchine
e attrezzature destinate a funzionare all'aperto
a) Livello di potenza sonora misurato
b) Livello di potenza sonora garantito
c) Parametri emissione acustica
d) Procedura di valutazione della conformità
e) Organismo notificato

8. Fatto a 9. Data

Deutsch (German)

EG-Konformitätserklärung

1. Der Unterzeichner, Piet Renneboog erklärt hiermit
im Namen der Bevollmächtigten, dass das hierunter
genannte Maschine allen einschlägigen
Bestimmungen der * entspricht.
* Maschinenrichtlinie 2006/42/EG
* Richtlinie der Elektromagnetischen Kompatibilität
2004/108/EG
* Geräuschrichtlinie im Freien 2000/14EG -
2005/88/EG

2. Beschreibung der Maschine
a) Allgemeine Bezeichnung : Stromerzeuger
b) Funktion : Strom produzieren
c) Handelsbezeichnung d) Typ
e) Seriennummer

3. Hersteller

4. Bevollmächtigter

5. Verweis auf harmonisierte Normen

6. Andere Normen oder Spezifikationen

7. Geräuschrichtlinie im Freien
a) gemessene Lautstärke
b) Schalleistungspegel
c) Geräuschvorgabe
d) Konformitätsbewertungs Ablauf
e) Benannte Stelle

8. Ort 9. Datum

Nederlands (Dutch)

EG-verklaring van overeenstemming

1. Ondergetekende, Piet Renneboog, in naam van
de gemachtigde van de fabrikant, verklaart hiermee
dat het hieronder beschreven machine voldoet aan
alle toepasselijke bepalingen van :
* Richtlijn 2006/42/EG betreffende machines
* Richtlijn 2004/108/EG betreffende
elektromagnetische overeenstemming
* Richtlijn 2000/14/EG - 2005/88/EG betreffende
geluidsemissie (openlucht)

2. Beschrijving van de machine
a) Algemene benaming : Generator
b) Functie : elektriciteit produceren
c) Handelsbenaming d) Type
e) Serienummer

3. Fabrikant

4. Gemachtigde van de fabrikant

5. Refereert naar geharmoniseerde normen

6. Andere normen of specificaties

7. Geluidsemissierichtlijn (openlucht)
a) Gemeten geluidsvermogensniveau
b) Gewaarborgd geluidsvermogensniveau
c) Geluidsparameter
d) Conformiteitsbeoordelingsprocedure
e) Aangemelde instantie

8. Plaats 9. Datum

Dansk ( Danish )

EF OVERENSTEMMELSEERKLÆRING

1. UNDERTEGNEDE, PIET RENNEBOOG, PÅ
VEGNE AF DEN AUTORISEREDE
REPRÆSETANT, ERKLÆRER HERMED AT
MASKINEN, SOM ER BESKREVET NEDENFOR,
OPFYLDER ALLE RELEVANTE BESTEMMELSER
IFØLGE:
* MASKINDIREKTIV 2006/42/EF
* EMC-DIREKTIV 2004/108/EF
* DIREKTIV OM STØJEMISSION 2000/14/EF -
2005/88/EF

2. BESKRIVELSE AF PRODUKTET
a) FÆLLESBETEGNELSE : Generator
b) ANVENDELSE : Produktion af elektricitet
c) HANDELSBETEGNELSE d) TYPE
e) SERIENUMMER

3. PRODUCENT

4. AUTORISERET REPRÆSENTANT

5. REFERENCE TIL HARMONISEREDE
STANDARDER

6. ANDRE STANDARDER ELLER
SPEFIFIKATIONER

7. DIREKTIV OM STØJEMISSION FRA MASKINER
TIL UDENDØRS BRUG
a) MÅLT LYDEFFEKTNIVEAU
b) GARANTERET LYDEFFEKTNIVEAU
c) STØJPARAMETER
d) PROCEDURE FOR
OVERENSSTEMMELSESVURDERING
e) BEMYNDIGET ORGAN

8. STED 9. DATO

Ελληνικά (Greek)

EK-Δήλωση συμμόρφωσης

1. Ο κάτωθι υπογεγραμμένος ,Piet Renneboog, εκ

μέρους του εξουσιοδοτημένου αντιπροσώπου με το
παρών δηλώνω ότι το παρακάτω περιγραφόμενο
όχημα πληροί όλες τις σχετικές προδιαγραφές του:

* Οδηγία 2006/42/ΕΚ για μηχανές
* Οδηγία 2004/108/ΕΚ για την ηλεκτρομαγνητική
συμβατότητα
* Οδηγία 2000/14/ΕΚ - 2005/88/EK για το επίπεδο
θορύβου σε εξωτερικούς χώρους.

2. Περιγραφή μηχανήματος
a) Γενική ονομασία : Ηλεκτοπαραγωγό ζεύγος
b) Λειτουργία : για παραγωγή ηλεκτρικής ενέργειας
c) Εμπορική ονομασία d) Τύπος
e) Αριθμός σειράς παραγωγής

3. Κατασκευαστής

4. Εξουσιοδοτημένος αντιπρόσωπος

5. Αναφορά σε εναρμονισμένα πρότυπα

6. Λοιπά πρότυπα ή προδιαγραφές

7. Οδηγία επιπέδου θορύβου εξωτερικών χώρων
a) Μετρηθείσα ηχητική

ένταση
b) Εγγυημένη ηχητική ένταση
c) Ηχητική παράμετρος
d) Διαδικασία πιστοποίησης
e) Οργανισμόςπιστοποίησης

8. Η δοκιμή έγινε 9. Ημερομηνία

Svenska ( Swedish )

EG-försäkran om överensstämmelse

1. Undertecknad, Piet Rennebog, på uppdrag av
auktoriserad representant, deklarerar härmed att
maskinen beskriven nedan fullföljer alla relevanta
bestämmelser enl :
* Direktiv 2006/42/EG gällande maskiner
* Direktiv 2004/108/EG gällande elektromagnetisk
kompatibilitet
* Direktiv 2000/14//EG - 2005/88/EG gällande buller
utomhus

2. Maskinbeskrivning
a) Allmän benämning : Elverk
b) Funktion : producera el
c) Och varunamn d) Typ
e) Serienummer

3. Tillverkare

4. Auktoriserad representant

5. referens till överensstämmande standarder

6. Andra standarder eller specifikationer

7. Direktiv för buller utomhus
a) Uppmätt ljudnivå
b) Garanterad ljudnivå
c) Buller parameter
d) Förfarande för bedömning
e) Anmälda organ

8. Utfärdat vid 9. Datum

Español (Spanish)

Declaración de Conformidad CE

1. El abajo firmante, Piet Renneboog, en
representación del representante autorizado,
adjunto declara que la máquina abajo descrita,
cumple las cláusulas relevantes de:
* Directiva 2006/42/CE de maquinaria
* Directiva 2004/108/CE de compatibilidad
electromagnética
* Directiva 2000/14/CE - 2005/88/CE de ruido
exterior

2. Descripción de la máquina
a) Denominación genérica : Generador
b) Función : Producción de electricidad
c) Denominación comercial d) Tipo
e) Número de serie

3. Fabricante

4. Representante autorizado

5. Referencia de los estándar harmonizados

6. Otros estándar o especificaciones

7. Directiva sobre ruido exterior
a)Potencia sonora Medida
b) Potencia sonora Garantizada
c) Parámetros ruido
d) Procedimiento evaluación conformidad
e) Organismo notificado

8. Realizado en 9. Fecha

Română (Romanian)

CE -Declaratie de Conformitate

1. Subsemnatul Piet Renneboog, in numele
reprezentantului autorizat, declar prin prezenta
faptul ca echipamentul descris mai jos indeplineste
toate conditiile necesare din:
* Directiva 2006/42/CE privind echipamentul
* Directiva 2004/108/CE privind compatibilitatea
electromagnetica
* Directiva 2000/14/CE - 2005/88/CE privind
poluarea fonica in spatiu deschis

2. Descrierea echipamentului
a) Denumire generica : Motogenerator electric
b) Domeniu de utilizare : generarea energiei
electrice
c) Denumire comercialad) Tip
e) Serie produs

3. Producator

4. Reprezentantul Autorizat

5. Referinta la standardele armonizate

6. Alte standarde sau norme

7. Directiva privind poluarea fonica in spatiu inchis
a) Puterea acustica masurata
b) Putere acustica maxim garantata
c) Indice poluare fonica
d) Procedura de evaluare a conformitatii
e) Notificari

8. Emisa la 9. Data

DOC_FMH_出力用.indd 2 11/04/14 16:13

Lietuvių kalba (Lithuanian)

EB atitikties deklaracija

1. Įgaliotojo atstovo vardu pasirašęs Piet
Renneboog patvirtina, kad žemiau aprašyta mašina
atitinka visas išvardintų direktyvų nuostatas:
* Mechanizmų direktyva 2006/42/EB
* Elektromagnetinio suderinamumo direktyva
2004/108/EB
* Triukšmo lauke direktyva 2000/14/EB -
2005/88/EB

2. Prietaiso aprašymas
a) Bendras pavadinimas : Generatorius
b) Funkcija : elektros energijos gaminimas
c) Komercinis pavadinimas d) Tipas
e) Serijos numeris

3. Gamintojas

4. Įgaliotasis atstovas

5. Nuorodos į suderintus standartus

6. Kiti standartai ir specifikacija

7. Triukšmo lauke direktyva
a) Išmatuotas garso galingumo lygis
b) Garantuojamas garso galingumo lygis
c) Triukšmo parametras
d) Tipas
e) Registruota įstaiga

8. Vieta 9. Data

Български (Bulgarian)

ЕО декларация за съответствие

1. Долуподписаният Пайът Ренебуг, от името на

упълномощения представител, с настоящото
декларирам, че машините, описани по-долу,
отговарят на всички съответни разпоредби на:

* Директива2006/42/ЕО относно машините
* Директива 2004/108/ЕО относно

електромагнитната съвместимост
Директива 2000/14/ЕO - 2005/88/EO относно
шумовите емисии на съоръжения,
предназначени за употреба извън сградите

2. Описание на машините
а) Общо наименование : Генераторен комплект
b) Функция : производство на електроенергия
с) Търговско наименование d) Тип

e) Сериен номер

3. Производител

4. Упълномощен представител

5. Съответствие с хармонизирани стандарти

6. Други стандарти или спецификации

7. Директива относно шумовите емисии на

съоръжения, предназначени за употреба извън
сградите
а) Измеренa звукова мощност
b) Гарантиранa звукова мощност
с) Параметърът шум

d) Процедурата за оценка на съответствието
e) Нотифициран орган

8. Място на изготвяне 9. Дата на изготвяне

Norsk (Norwegian)

EF- Samsvarserklæring

1.Undertegnede Piet Renneboog på vegne av
autorisert representant herved erklærer at maskineri
beskrevet nedenfor innfrir relevant informasjon fra
følgende forskrifter.
* Maskindirektivet 2006/42/EF
* Direktiv EMC: 2004/108/EF
Elektromagnetisk kompablitet
* Direktiv om støy utendørs 2000/14/EF -
2005/88/EF

2. Beskrivelse av produkt
a) Felles benevnelse : Generator
b) Funksjon : Produsere strøm
c) Handelsnavn d) Type
e) Serienummer

3. Produsent

4. Autorisert representant

5. Referanse til harmoniserte standarder

6. Øvrige standarder eller spesifikasjoner

7. Utendørs direktiv får støy
a) Målt støy
b) Maks støy
c) Konstant støy
d) Verdi vurderings prosedyre
e) Gjeldene kjøretøy/kropp/stamme/skrog

8. Sted 9. Dato

Türk (Turkish)
AT Uygunluk Beyan

1. Aşağda imzas bulunan Piet Renneboog, yetkili
temsilci adina, bu yazyla birlikte aşağdaki makine
ile ilgili tüm hükümlülüklerin yerine getirildiğini beyan
etmektedir:
* Makina Emniyet Yönetmeliği 2006/42/AT
* Elektromanyetik Uyumluluk Yönetmeliği
2004/108/AT
* Açk Alanda Kullanlan Techizat Tarafndan
Oluşturulan Çevredeki Gürültü Emisyonu İle İlgili
Yönetmelik 2000/14/AT-2005/88/AT

2. Makinann tarifi
a) Kapsaml adlandrma : Jeneratör grubu
b) İşlevi : Elektrik gücü üretilmesi
c) Ticari ad d) Tipi
e) Seri numaras

3. İmalatç

4. Yetkili temsilci

5. Uyumlaştrlmş standartlara atf

6. Diğer standartlar veya spesifikasyonlar

7. Açk alan gürültü Yönetmeliği
a) Ölçülen ses gücü
b) Garanti edilen ses gücü
c) Gürültü parametresi
d) Uygunluk değerlendirme prosedürü
e) Onaylanmş kuruluş

8. Beyan

n yeri : 9. Beyann tarihi :

Íslenska(Icelandic)
EB-Samræmisyfirlýsing

1. Undirritaður Piet Renneboog staðfestir hér með
fyrir hönd löggiltra aðila að upplýsingar um vélbúnað
hér að neðan eru tæmandi hvað varðar alla
tilheyrandi málaflokka, svo sem
*Leiðbeiningar fyrir vélbúnað 2006/42/EB
*Leiðbeiningar fyrir rafsegulsvið 2004/108/EB
*Leiðbeiningar um hávaðamengun 2000/14/EB-
2005/88/EB

2. Lýsing á vélbúnaði
a) Flokkur : Rafstöðvar
b) Virkni : Framleiðsla á rafmagni
c) Nafn d) Tegund
e) Seríal númer

3. Framleiðandi

4. Löggildir aðilar

5. Tilvísun um heildar staðal

6. Aðrir staðlar eða sérstöður

7. Leiðbeiningar um hávaðamengun
a) Mældur hávaða styrkur
b) Staðfestur hávaða styrkur
c) Hávaða breytileiki
d) Staðfesting á gæðastöðlum
e) Merkingar

8. Gert hjá 9. Dagsetning

Português ( Portuguese )

Declaração CE de Conformidade

1. O abaixo assinado, Piet Renneboog, declara
deste modo, em nome do mandatário, que o
máquina abaixo descrito cumpre todas as
estipulações relevantes da:
* Directiva 2006/42/CE de máquina
* Directiva 2004/108/CE de compatibilidade
electromagnética
* Directiva 2000/14/CE - 2005/88/CE de ruído
exterior

2. Descrição da máquina
a) Denominação genérica : Gerador
b) Função : produção de energia eléctrica
c) Marca d) Tipo
e) Número de série

3. Fabricante

4. Mandatário

5. Referência a normas harmonizadas

6. Outras normas ou especificações

7. Directiva de ruído exterior
a) Potência sonora medida
b) Potência sonora garantida
c) Parametro de ruído
d) Procedimento de avaliação da conformidade
e) Organismo notificado

8. Feito em 9. Data

Polski ( Polish )

Deklaracja zgodności WE

1. Niżej podpisany, Piet Renneboog, w imieniu
upoważnionego przedstawiciela, niniejszym
deklaruje, że urządzenie opisane poniżej spełnia
wszystkie odpowiednie postanowienia:
* Dyrektywa Maszynowa 2006/42/WE
* Dyrektywa Kompatybilności Elektromagnetycznej
2004/108/WE
* Dyrektywa Hałasowa 2000/14/WE - 2005/88/WE

2. Opis urządzenia
a) Ogólne określenie : Agregat prądotwórczy
b) Funkcja : produkcja energii elektrycznej
c) Nazwa handlowa d) Typ
e) Numery seryjne

3. Producent

4. Upoważniony Przedstawiciel

5. Zastosowane normy zharmonizowane

6. Pozostałe normy i przepisy

7. Dyrektywa Hałasowa
a) Zmierzony poziom mocy akustycznej
b) Gwarantowany poziom mocy akustycznej
c) Wartość hałasu
d) Procedura oceny zgodności
e) Jednostka notyfikowana

8. Miejsce 9. Data

Suomi / Suomen kieli (Finnish)

EY-VAATIMUSTENMUKAISUUSVAKUUTUS

1. Allekirjoittanut, Piet Renneboog valtuutettu
valmistajan edustaja, vakuuttaa täten että alla
mainittu kone/tuote täyttää kaikki seuraavia
määräyksiä:
* Konedirektiivi 2006/42/EY
* Direktiivi 2004/108/EY sähkömagneettinen
yhteensopivuus
* Direktiivi 2000/14/EY - 2005/88/EY ympäristön
melu

2. TUOTTEEN KUVAUS
a) Yleisarvomäärä : Aggregaatti
b) Toiminto : sähkön tuottaminen
c) KAUPALLINEN NIMI d) TYYPPI
e) SARJANUMERO

3. VALMISTAJA

4. VALMISTAJAN EDUSTAJAN

5. VIITTAUS YHTEISIIN STANDARDEIHIN

6. MUU STANDARDI TAI TEKNISET TIEDOT

7. Ympäristön meludirektiivi
a) Mitattu melutaso
b) Todenmukainen melutaso
c) Melu parametrit
d) Yhdenmukaisuuden arvioinnin menetelmä
e) Tiedonantoelin

8. TEHTY 9. PÄIVÄMÄÄRÄ

Magyar ( Hungarian )

EK-megfelelőségi nyilatkozata

1. Alulírott Piet Renneboog, a gyártó cég törvényes
képviselőjeként nyilatkozom, hogy az általunk
gyártott gép megfelel az összes, alább felsorolt
direktívának:
* 2006/42/EK Direktívának berendezésekre
* 2004/108/EK Direktívának elektromágneses
megfelelőségre
* 2000/14/EK - 2005/88/EK Diretívának kültéri
zajszintre

2. A gép leírása
a) Általános megnevezés : Áramfejlesztő
b) Funkció : elektromos áram előállítása
c) Kereskedelmi nevét d) Tipus
e) Sorozatszám

3. Gyártó

4. Jogosult képviselő

5. Hivatkozással a szabványokra

6. Más előírások, megjegyzések

7. Kültéri zajszint Direktíva
a) Mért hangerő
b) Szavatolt hangerő
c) Zajszint paraméter
d) Megfelelőségi becslési eljárás
e) Kijelölt szervezet

8. Keltezés helye

9. Keltezés ideje

Cestina (Czech)

ES – Prohlášení o shodě

1. Podepsaný Piet Renneboog, jako autorizovaná
osoba zde potvrzuje, že stroj popsaný níže splňuje
požadavky příslušných opatření:
* Směrnice 2006/42/ES pro strojní zařízení
* Směrnice 2004/108/ES stanovující technické
požadavky na výrobky z hlediska elektromagnetické
kompatibility
* Směrnice 2000/14/ES - 2005/88/ES stanovující
technické požadavky na výrobky z hlediska emisí
hluku zařízení pro venkovní použití

2. Popis zařízení
a) Všeobecné označení : Elektrocentrála
b) Funkce : Výraba elektrické energie
c) Obchodní název d) Typ
e) Výrobní číslo

3. Výrobce

4. Autorizovaná osoba

5. Odkazy na harmonizované normy

6. Ostatní použité normy a specifikace

7. Směrnice pro hluk pro venkovní použití
a) Naměřený akustický výkon
b) Garantovaný akustický výkon
c) Parametr hluku
d) Způsob posouzení shody
e) Notifikovaná osoba

8. Podepsáno v 9. Datum

Latviešu (Latvian)

EK atbilstības deklarācija

1. Piet Renneboog ar savu parakstu zem šī
dokumenta, autorizētā pārstāvja vārdā, paziņo, ka
zemāk aprakstītie mašīna, atbilst visām zemāk
norādīto direktīvu sadaļām:
* Direktīva 2006/42/EK par mašīnām
* Direktīva 2004/108/EK attiecībā uz
elektromagnētisko savietojamību
* Direktīva 2000/14/EK - 2005/88/EK par trokšņa
emisiju vidē

2. Iekārtas apraksts
a) Vispārējais nosukums : Ģeneratora iekārta
b) Funkcija : elektriskās strāvas ražošana
c) Komercnosaukums d) Tips
e) Sērijas numurs

3. Ražotājs

4. Autorizētais pārstāvis

5. Atsauce uz saskaņotajiem standartiem

6. Citi noteiktie standarti vai specifikācijas

7. Ārējo trokšņu Direktīva
a) Izmērītā trokšņa lielums
b) Pieļaujamais trokšņa lielums
c) Trokšņa parametri
d) Atbilstības vērtējuma procedūra
e) Informētā iestāde

8. Vieta 9. Datums

Slovenčina (Slovak)

ES vyhlásenie o zhode

1. Dolupodpísaný, Piet Renneboog, ako
autorizovaný zástupca výrobcu, týmto vyhlasuje, že
uvedený strojové je v zhode s nasledovnými
smernicami:
* Smernica 2006/42/ES (Strojné zariadenia)
* Smernica 2004/108/ES (Elektromagnetická
kompatibilita)
* Smernica 2000/14/ES - 2005/88/ES (Emisie
hluku)

2. Popis stroja
a) Druhové označenie : Elektrocentrála
b) Funkcia : Výroba elektrického napätia
c) Obchodný názov d) Typ
e) Výrobné číslo

3. Výrobca

4. Autorizovaný zástupca

5. Referencia k harmonizovaným štandardom

6. Ďaľšie štandardy alebo špecifikácie

7. Smernica pre emisie hluku vo voľnom
priestranstve
a) Nameraná hladina akustického výkonu
b) Zaručená hladina akustického výkonu
c) Rozmer
d) Procedúra posudzovania zhody
e) Notifikovaná osoba

8. Miesto 9. Dátum

Eesti (Estonian)

EÜ vastavusdeklaratsioon

1. Käesolevaga kinnitab allakirjutanu, Piet
Renneboog, volitatud esindaja nimel, et allpool
kirjeldatud masina vastab kõikidele alljärgnevate
direktiivide sätetele:
* Masinate direktiiv 2006/42/EÜ
* Elektromagnetilise ühilduvuse direktiiv
2004/108/EÜ
* Välismüra direktiiv 2000/14/EÜ - 2005/88/EÜ

2. Seadmete kirjeldus
a) Üldnimetus : Generaator
b) Funktsiooon : elektrienergia tootmine
c) Kaubanduslik nimetus d) Tüüp
e) Seerianumber

3. Tootja

4. Volitatud esindaja

5. Viide ühtlustatud standarditele

6. Muud standardid ja spetsifikatsioonid

7. Välismüra direktiiv
a) Mõõdetud helivõimsuse tase
b) Lubatud helivõimsuse tase
c) Müra parameeter
d) Vastavushindamismenetlus
e) Teavitatud asutus

8. Koht 9. Kuupäev

Slovensčina (Slovenian)

ES izjava o skladnosti

1. Spodaj podpisani, Piet Renneboog, ki je
pooblaščena oseba in v imenu proizvajalca izjavlja,
da spodaj opisana stroj ustreza vsem navedenim
direktivam:
* Direktiva 2006/42/ES o strojih
* Direktiva2004/108/ES o elektromagnetni
združljivosti
* Direktiva 2000/14/ES - 2005/88/ES o hrupnosti

2. Opis naprave
a) Vrsta stroja : Agregat za proizvodnjo el. energije
b) Funkcija : proizvodnja električne energije
c) Trgovski naziv
d) Tip
e) Serijska številka

3. Proizvajalec

4. Pooblaščeni predstavnik

5. Upoštevani harmonizirani standardi

6. Ostali standardi ali specifikacij

7. Direktiva o hrupnosti
a) Izmerjena zvočna moč
b) Garantirana zvočna moč
c) Parameter
d) Postopek
e) Postopek opravil

8. Kraj 9. Datum

Lietuvių kalba (Lithuanian)

EB atitikties deklaracija

1. Įgaliotojo atstovo vardu pasirašęs Piet
Renneboog patvirtina, kad žemiau aprašyta mašina
atitinka visas išvardintų direktyvų nuostatas:
* Mechanizmų direktyva 2006/42/EB
* Elektromagnetinio suderinamumo direktyva
2004/108/EB
* Triukšmo lauke direktyva 2000/14/EB -
2005/88/EB

2. Prietaiso aprašymas
a) Bendras pavadinimas : Generatorius
b) Funkcija : elektros energijos gaminimas
c) Komercinis pavadinimas d) Tipas
e) Serijos numeris

3. Gamintojas

4. Įgaliotasis atstovas

5. Nuorodos į suderintus standartus

6. Kiti standartai ir specifikacija

7. Triukšmo lauke direktyva
a) Išmatuotas garso galingumo lygis
b) Garantuojamas garso galingumo lygis
c) Triukšmo parametras
d) Tipas
e) Registruota įstaiga

8. Vieta 9. Data

Türk (Turkish)
AT Uygunluk Beyan

1. Aşağda imzas bulunan Piet Renneboog, yetkili
temsilci adina, bu yazyla birlikte aşağdaki makine
ile ilgili tüm hükümlülüklerin yerine getirildiğini beyan
etmektedir:
* Makina Emniyet Yönetmeliği 2006/42/AT
* Elektromanyetik Uyumluluk Yönetmeliği
2004/108/AT
* Açk Alanda Kullanlan Techizat Tarafndan
Oluşturulan Çevredeki Gürültü Emisyonu İle İlgili
Yönetmelik 2000/14/AT-2005/88/AT

2. Makinann tarifi
a) Kapsaml adlandrma : Jeneratör grubu
b) İşlevi : Elektrik gücü üretilmesi
c) Ticari ad d) Tipi
e) Seri numaras

3. İmalatç

4. Yetkili temsilci

5. Uyumlaştrlmş standartlara atf

6. Diğer standartlar veya spesifikasyonlar

7. Açk alan gürültü Yönetmeliği
a) Ölçülen ses gücü
b) Garanti edilen ses gücü
c) Gürültü parametresi
d) Uygunluk değerlendirme prosedürü
e) Onaylanmş kuruluş

8. Beyan

n yeri : 9. Beyann tarihi :

DOC_FMH_出力用.indd 3 11/04/14 16:13

Lietuvių kalba (Lithuanian)

EB atitikties deklaracija

1. Įgaliotojo atstovo vardu pasirašęs Piet
Renneboog patvirtina, kad žemiau aprašyta mašina
atitinka visas išvardintų direktyvų nuostatas:
* Mechanizmų direktyva 2006/42/EB
* Elektromagnetinio suderinamumo direktyva
2004/108/EB
* Triukšmo lauke direktyva 2000/14/EB -
2005/88/EB

2. Prietaiso aprašymas
a) Bendras pavadinimas : Generatorius
b) Funkcija : elektros energijos gaminimas
c) Komercinis pavadinimas d) Tipas
e) Serijos numeris

3. Gamintojas

4. Įgaliotasis atstovas

5. Nuorodos į suderintus standartus

6. Kiti standartai ir specifikacija

7. Triukšmo lauke direktyva
a) Išmatuotas garso galingumo lygis
b) Garantuojamas garso galingumo lygis
c) Triukšmo parametras
d) Tipas
e) Registruota įstaiga

8. Vieta 9. Data

Български (Bulgarian)

ЕО декларация за съответствие

1. Долуподписаният Пайът Ренебуг, от името на

упълномощения представител, с настоящото
декларирам, че машините, описани по-долу,

отговарят на всички съответни разпоредби на:

* Директива2006/42/ЕО относно машините
* Директива 2004/108/ЕО относно

електромагнитната съвместимост
Директива 2000/14/ЕO - 2005/88/EO относно
шумовите емисии на съоръжения,
предназначени за употреба извън сградите

2. Описание на машините
а) Общо наименование : Генераторен комплект
b) Функция : производство на електроенергия
с) Търговско наименование d) Тип

e) Сериен номер

3. Производител

4. Упълномощен представител

5. Съответствие с хармонизирани стандарти

6. Други стандарти или спецификации

7. Директива относно шумовите емисии на

съоръжения, предназначени за употреба извън
сградите
а) Измеренa звукова мощност
b) Гарантиранa звукова мощност
с) Параметърът шум

d) Процедурата за оценка на съответствието
e) Нотифициран орган

8. Място на изготвяне 9. Дата на изготвяне

Norsk (Norwegian)

EF- Samsvarserklæring

1.Undertegnede Piet Renneboog på vegne av
autorisert representant herved erklærer at maskineri
beskrevet nedenfor innfrir relevant informasjon fra
følgende forskrifter.
* Maskindirektivet 2006/42/EF
* Direktiv EMC: 2004/108/EF
Elektromagnetisk kompablitet
* Direktiv om støy utendørs 2000/14/EF ­2005/88/EF

2. Beskrivelse av produkt
a) Felles benevnelse : Generator
b) Funksjon : Produsere strøm
c) Handelsnavn d) Type
e) Serienummer

3. Produsent

4. Autorisert representant

5. Referanse til harmoniserte standarder

6. Øvrige standarder eller spesifikasjoner

7. Utendørs direktiv får støy
a) Målt støy
b) Maks støy
c) Konstant støy
d) Verdi vurderings prosedyre
e) Gjeldene kjøretøy/kropp/stamme/skrog

8. Sted 9. Dato

Türk (Turkish)
AT Uygunluk Beyan

1. Aşağda imzas bulunan Piet Renneboog, yetkili
temsilci adina, bu yazyla birlikte aşağdaki makine
ile ilgili tüm hükümlülüklerin yerine getirildiğini beyan
etmektedir:
* Makina Emniyet Yönetmeliği 2006/42/AT
* Elektromanyetik Uyumluluk Yönetmeliği
2004/108/AT
* Açk Alanda Kullanlan Techizat Tarafndan
Oluşturulan Çevredeki Gürültü Emisyonu İle İlgili
Yönetmelik 2000/14/AT-2005/88/AT

2. Makinann tarifi
a) Kapsaml adlandrma : Jeneratör grubu
b) İşlevi : Elektrik gücü üretilmesi
c) Ticari ad d) Tipi
e) Seri numaras

3. İmalatç

4. Yetkili temsilci

5. Uyumlaştrlmş standartlara atf

6. Diğer standartlar veya spesifikasyonlar

7. Açk alan gürültü Yönetmeliği
a) Ölçülen ses gücü
b) Garanti edilen ses gücü
c) Gürültü parametresi
d) Uygunluk değerlendirme prosedürü
e) Onaylanmş kuruluş

8. Beyan

n yeri : 9. Beyann tarihi :

Íslenska(Icelandic)
EB-Samræmisyfirlýsing

1. Undirritaður Piet Renneboog staðfestir hér með
fyrir hönd löggiltra aðila að upplýsingar um vélbúnað
hér að neðan eru tæmandi hvað varðar alla
tilheyrandi málaflokka, svo sem
*Leiðbeiningar fyrir vélbúnað 2006/42/EB
*Leiðbeiningar fyrir rafsegulsvið 2004/108/EB
*Leiðbeiningar um hávaðamengun 2000/14/EB­2005/88/EB

2. Lýsing á vélbúnaði
a) Flokkur : Rafstöðvar
b) Virkni : Framleiðsla á rafmagni
c) Nafn d) Tegund
e) Seríal númer

3. Framleiðandi

4. Löggildir aðilar

5. Tilvísun um heildar staðal

6. Aðrir staðlar eða sérstöður

7. Leiðbeiningar um hávaðamengun
a) Mældur hávaða styrkur
b) Staðfestur hávaða styrkur
c) Hávaða breytileiki
d) Staðfesting á gæðastöðlum
e) Merkingar

8. Gert hjá 9. Dagsetning

Lietuvių kalba (Lithuanian)

EB atitikties deklaracija

1. Įgaliotojo atstovo vardu pasirašęs Piet
Renneboog patvirtina, kad žemiau aprašyta mašina
atitinka visas išvardintų direktyvų nuostatas:
* Mechanizmų direktyva 2006/42/EB
* Elektromagnetinio suderinamumo direktyva
2004/108/EB
* Triukšmo lauke direktyva 2000/14/EB -
2005/88/EB

2. Prietaiso aprašymas
a) Bendras pavadinimas : Generatorius
b) Funkcija : elektros energijos gaminimas
c) Komercinis pavadinimas d) Tipas
e) Serijos numeris

3. Gamintojas

4. Įgaliotasis atstovas

5. Nuorodos į suderintus standartus

6. Kiti standartai ir specifikacija

7. Triukšmo lauke direktyva
a) Išmatuotas garso galingumo lygis
b) Garantuojamas garso galingumo lygis
c) Triukšmo parametras
d) Tipas
e) Registruota įstaiga

8. Vieta 9. Data

Български (Bulgarian)

ЕО декларация за съответствие

1. Долуподписаният Пайът Ренебуг, от името на

упълномощения представител, с настоящото
декларирам, че машините, описани по-долу,
отговарят на всички съответни разпоредби на:

* Директива2006/42/ЕО относно машините
* Директива 2004/108/ЕО относно

електромагнитната съвместимост
Директива 2000/14/ЕO - 2005/88/EO относно
шумовите емисии на съоръжения,
предназначени за употреба извън сградите

2. Описание на машините
а) Общо наименование : Генераторен комплект
b) Функция : производство на електроенергия
с) Търговско наименование d) Тип

e) Сериен номер

3. Производител

4. Упълномощен представител

5. Съответствие с хармонизирани стандарти

6. Други стандарти или спецификации

7. Директива относно шумовите емисии на

съоръжения, предназначени за употреба извън
сградите
а) Измеренa звукова мощност
b) Гарантиранa звукова мощност
с) Параметърът шум

d) Процедурата за оценка на съответствието
e) Нотифициран орган

8. Място на изготвяне 9. Дата на изготвяне

Norsk (Norwegian)

EF- Samsvarserklæring

1.Undertegnede Piet Renneboog på vegne av
autorisert representant herved erklærer at maskineri
beskrevet nedenfor innfrir relevant informasjon fra
følgende forskrifter.
* Maskindirektivet 2006/42/EF
* Direktiv EMC: 2004/108/EF
Elektromagnetisk kompablitet
* Direktiv om støy utendørs 2000/14/EF -
2005/88/EF

2. Beskrivelse av produkt
a) Felles benevnelse : Generator
b) Funksjon : Produsere strøm
c) Handelsnavn d) Type
e) Serienummer

3. Produsent

4. Autorisert representant

5. Referanse til harmoniserte standarder

6. Øvrige standarder eller spesifikasjoner

7. Utendørs direktiv får støy
a) Målt støy
b) Maks støy
c) Konstant støy
d) Verdi vurderings prosedyre
e) Gjeldene kjøretøy/kropp/stamme/skrog

8. Sted 9. Dato

Türk (Turkish)
AT Uygunluk Beyan

1. Aşağda imzas bulunan Piet Renneboog, yetkili
temsilci adina, bu yazyla birlikte aşağdaki makine
ile ilgili tüm hükümlülüklerin yerine getirildiğini beyan
etmektedir:
* Makina Emniyet Yönetmeliği 2006/42/AT
* Elektromanyetik Uyumluluk Yönetmeliği
2004/108/AT
* Açk Alanda Kullanlan Techizat Tarafndan
Oluşturulan Çevredeki Gürültü Emisyonu İle İlgili
Yönetmelik 2000/14/AT-2005/88/AT

2. Makinann tarifi
a) Kapsaml adlandrma : Jeneratör grubu
b) İşlevi : Elektrik gücü üretilmesi
c) Ticari ad d) Tipi
e) Seri numaras

3. İmalatç

4. Yetkili temsilci

5. Uyumlaştrlmş standartlara atf

6. Diğer standartlar veya spesifikasyonlar

7. Açk alan gürültü Yönetmeliği
a) Ölçülen ses gücü
b) Garanti edilen ses gücü
c) Gürültü parametresi
d) Uygunluk değerlendirme prosedürü
e) Onaylanmş kuruluş

8. Beyan

n yeri : 9. Beyann tarihi :

Íslenska(Icelandic)
EB-Samræmisyfirlýsing

1. Undirritaður Piet Renneboog staðfestir hér með
fyrir hönd löggiltra aðila að upplýsingar um vélbúnað
hér að neðan eru tæmandi hvað varðar alla
tilheyrandi málaflokka, svo sem
*Leiðbeiningar fyrir vélbúnað 2006/42/EB
*Leiðbeiningar fyrir rafsegulsvið 2004/108/EB
*Leiðbeiningar um hávaðamengun 2000/14/EB-
2005/88/EB

2. Lýsing á vélbúnaði
a) Flokkur : Rafstöðvar
b) Virkni : Framleiðsla á rafmagni
c) Nafn d) Tegund
e) Seríal númer

3. Framleiðandi

4. Löggildir aðilar

5. Tilvísun um heildar staðal

6. Aðrir staðlar eða sérstöður

7. Leiðbeiningar um hávaðamengun
a) Mældur hávaða styrkur
b) Staðfestur hávaða styrkur
c) Hávaða breytileiki
d) Staðfesting á gæðastöðlum
e) Merkingar

8. Gert hjá 9. Dagsetning

DOC_FMH_出力用.indd 4 11/04/14 16:13