Honda Accord 2019 Owner's Manual

31TVAG10 OG10276 00X31-TVA-G101

owners.honda.com (U.S.)

myhonda.ca (Canada)

2019 Honda ACCORD Owner's Guide

2019

OWNER'S GUIDE

DISCLOSURES

Devices That Emit Radio Waves

Each radio frequency device installed in the vehicle conforms to the requirements and standards of the regulation listed below:

As required by the FCC: This device complies with Part 15 of the FCC rules. Operation is subject to the

following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

Changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.

As required by Industry Canada: This device complies with Industry Canada licence-exempt RSS standard(s).

Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

Disclaimer

The information and data contained herein are believed to be accurate and reliable. American Honda Motor Co., Inc. makes no warranty of any kind and accepts no responsibility for the results obtained through application of this information.

Privacy Notice

This vehicle may share location and usage information. To manage this setting, visit

www.hondalink.com/vehicle-data-choices.

Event Data Recorders

This vehicle is equipped with an event data recorder (EDR). The main purpose of an EDR is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle, data that will assist in understanding how a vehicle’s systems performed. The EDR is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less. The EDR in this vehicle is designed to record such data as:

• How various systems in your vehicle were operating;

• Whether or not the driver and passenger safety belts were buckled/fastened;

• How far (if at all) the driver was depressing the accelerator and/or brake pedal; and,

• How fast the vehicle was traveling.

These data can help provide a better understanding of the circumstances in which crashes and injuries occur. NOTE: EDR data are recorded by your vehicle only if a non-trivial crash situation occurs; no data are recorded by the EDR under normal driving conditions and no personal data (e.g., name, gender, age, and crash location) are recorded. However, other parties, such as law enforcement, could combine the EDR data with the type of personally identifying data routinely acquired during a crash investigation.

To read data recorded by an EDR, special equipment is required, and access to the vehicle or the EDR is needed. In addition to the vehicle manufacturer, other parties such as law enforcement that have the special equipment can read the information if they have access to the vehicle or the EDR.

The data belong to the vehicle owner and may not be accessed by anyone else except as legally required or with the permission of the vehicle owner.

Service Diagnostic Recorders

This vehicle is equipped with service-related devices that record information about powertrain performance. The data can be used to verify emissions law requirements and/or help technicians diagnose and solve service problems. It may also be combined with data from other sources for research purposes, but it remains conﬁdential. Some diagnostic and maintenance information is uploaded to Honda upon vehicle start up.

INTRODUCTION

This Owner's Guide is intended to help you quickly get acquainted with your 2019 ACCORD SEDAN. It provides basic information and instructions on technology and convenience features, as well as emergency procedures and how to get assistance.

This guide is for vehicles sold in the United States and Canada. It covers all models, so you may ﬁnd descriptions of features and equipment that are not in your vehicle. Images throughout this guide represent features and equipment that are available on some, but not all, models.

This guide is not intended to be a substitute for the Owner's Manual. Visit

owners.honda.com

(U.S.) or

myhonda.ca

(Canada) to view the most current Owner's Manual, Navigation Manual, Vehicle Warranty, and the tire manufactures' warranties.

If you are the ﬁrst registered owner of your vehicle, you may request a complimentary printed copy of the Owner's Manual, Navigation Manual, or Vehicle Warranty within the ﬁrst six months of vehicle purchase. To request a copy, visit

owners.honda.com

and create or log in to your account. In Canada,

please request a copy from your Honda dealer. American Honda Motor Co., Inc. strives to be proactive in protecting our

environment and natural resources. By using electronic delivery for a considerable portion of the information typically found in a vehicle Owner's Manual, we are further reducing our impact on the environment.

Honda Automobile Customer Service

Your authorized Honda dealer should be able to answer any questions you have about your vehicle. However, if you are dissatisﬁed with the information you receive, you can call Honda Automobile Customer Service.

Call (800) 999-1009 (U.S.) or (888) 946-6329 (Canada)

Honda Roadside Assistance

24-hour emergency road service is available to you in the United States and Canada throughout your 3-year/36,000-mile warranty term. Services include jump starting, ﬂat tire and lockout assistance, towing, and more (limitations apply).

Call (866) 864-5211 (U.S.) or (800) 465-7587 (Canada)

TABLE OF CONTENTS

VISUAL INDEX........................................ 1

Steering Wheel and Nearby

Controls.............................................1

Dashboard and Nearby Controls...... 2

SAFETY INFORMATION........................ 3

Important Safety Information............ 3

Seat Belts..............................................4

Airbags..................................................7

Child Safety.........................................13

Safety Label Locations..................... 22

Reporting Safety Defects.................22

INSTRUMENT PANEL..........................24

Malfunction Indicators.....................24

Condition Indicators..........................25

On/Off Indicators............................... 26

Driver Information Interface............28

Head-Up Display- If equipped.........28

VEHICLE CONTROLS............................30

Using the Remote Transmitter.........30

Smart Entry System- If equipped....30

Door Operation...................................32

Power Window Operation................34

Power Moonroof- If equipped

Operation........................................35

Interior and Exterior Lights.............. 35

One-Touch Turn Signal..................... 37

Auto High Beam.................................37

Wiper Operation................................ 39

Adjusting the Front Seats.................41

Driving Position Memory

System- If equipped......................43

Adjusting the Head Restraints.........44

Adjusting the Rear Seats..................45

Floor Mats...........................................46

Adjusting the Steering Wheel......... 47

Adjusting the Mirrors........................47

Homelink® Universal

Transceiver- If equipped..............49

Climate Control System.................... 50

Front Seat Heaters- If equipped

and Ventilation- If equipped .......51

Customized Features.........................51

Setting the Clock................................53

AUDIO AND CONNECTIVITY.............. 54

Basic Audio Operation......................54

Color Audio System...........................57

Display Audio System.......................57

HondaLink®.........................................58

HondaLink® Assist- If equipped...... 58

Near Field Communication

(NFC)- If equipped - Models

with Display Audio........................59

Apple CarPlay™..................................61

Android Auto™................................... 62

Wi-Fi Connection- If equipped........ 63

System Updates.................................63

FM/AM Radio..................................... 65

SiriusXM® - If equipped....................66

iPod®....................................................67

USB Flash Drive.................................69

Bluetooth

Audio...............................71

BLUETOOTH

HANDSFREELINK

(HFL)...................................................75

Basic HFL Operation......................... 75

Pairing a Phone..................................77

Making a Call......................................78

SMS Text Messaging and E-

Mail- If equipped...........................83

Siri Eyes Free™...................................83

NAVIGATION........................................ 86

Basic Navigation Operation.............86

Entering Your Destination.................87

Routing................................................ 88

DRIVING.................................................90

Before Driving....................................90

Maximum Load Limit.........................91

Towing a Trailer..................................93

Towing Behind A Motorhome..........95

Remote Engine Start with

Vehicle Feedback- If

equipped.........................................95

Starting to Drive.................................97

Shifting.............................................. 100

Braking..............................................104

Ambient Meter.................................107

Vehicle Stability Assist® (VSA®)

System.......................................... 108

Honda Sensing®...............................109

Adaptive Cruise Control (ACC)- If

equipped with Low Speed

Follow- If equipped.....................110

Lane Keeping Assist System

(LKAS)........................................... 113

Road Departure Mitigation

(RDM)............................................115

Trafﬁc Sign Recognition System...116 Collision Mitigation Braking

System™ (CMBS™)......................117

Blind Spot Information System- If

equipped.......................................118

LaneWatch™- If equipped,.............119

Parking Sensor System- If

equipped.......................................120

Cross Trafﬁc Monitor- If

equipped.......................................121

Multi-View Rear Camera................122

Improving Fuel Economy and

Reducing CO2 Emissions............123

Refueling...........................................123

HANDLING THE UNEXPECTED........ 126

Shift Lever- If equipped Does Not

Move............................................. 126

Smart Entry System Battery

Strength........................................126

Jump Starting...................................127

Overheating......................................128

Emergency Engine Stop ................ 129

Emergency Towing..........................130

Tire Pressure Monitoring System

(TPMS)..........................................130

Changing a Tire................................131

Fuse Locations.................................136

MAINTENANCE..................................138

Safety Precautions..........................138

Maintenance MinderTM..................139

Under the Hood................................143

Engine Oil..........................................144

Engine Coolant.................................147

Checking the Battery...................... 148

Window Washer Fluid.................... 149

Brake/Clutch- If equipped Fluid.... 149

Changing Wiper Blades..................150

Tire Information................................151

Tire Labeling.....................................154

DOT Tire Quality Grading................155

Air Conditioning............................... 156

Testing of Readiness Codes...........156

SPECIFICATIONS............................... 158

CUSTOMER INFORMATION............. 162

Frequently Asked Questions/

Troubleshooting...........................162

Warranty Coverages.......................163

EPA Contact Information................164

VOICE COMMAND INDEX................ 165

Voice Portal Commands.................165

Phone Commands............................165

Audio Commands- If equipped......165

Navigation Commands- Models

with navigation only....................165

INDEX...................................................166

VISUAL INDEX

Quickly locate items in the vehicle's interior.

Steering Wheel and Nearby Controls

*1 - If equipped

VISUAL INDEX

| 1

Dashboard and Nearby Controls

*1 - If equipped

VISUAL INDEX

2 |

SAFETY INFORMATION

Your safety--and the safety of others--is very important and operating this vehicle safely is an important responsibility. While we strive to help you make informed decisions about safety, it is not practical or possible to warn you about all the hazards associated with operating or maintaining your vehicle. Therefore, you must use your own good judgment.

Important Safety Information

This guide explains many of your vehicle's safety features and how to use them. Please read this information carefully. Following the instructions below will also help to keep you and your passengers safe.

n Important Safety Precautions

• Always wear your seat belt.

• Secure all children in the proper restraint system.

• Be aware of airbag hazards.

• Don't drink and drive.

• Pay appropriate attention to the task of driving safely.

• Control your speed.

• Keep your vehicle in safe condition.

Engaging in cell phone conversation or other activities that keep you from paying close attention to the road, other vehicles, and pedestrians could lead to a crash. Remember, situations can change quickly, and only you can decide when it is safe to divert some attention away from driving.

Safety Messages

When you see the following messages throughout this guide, pay close attention.

You WILL be KILLED or SERIOUSLY HURT if you don’t follow instructions.

You CAN be KILLED or SERIOUSLY HURT if you don’t follow instructions.

You CAN be HURT if you don’t follow instructions. This information is intended to help you avoid damage to

your vehicle, other property, or the environment.

SAFETY INFORMATION

| 3

n Carbon Monoxide Gas

The engine exhaust from this vehicle contains carbon monoxide, a colorless, odorless, and highly toxic gas. As long as you properly maintain your vehicle and follow the instructions set forth below, you will not accumulate dangerous levels of carbon monoxide gas in the vehicle interior.

Have the exhaust system inspected for leaks whenever:

• The exhaust system is making an unusual noise.

• The exhaust system may have been damaged.

• The vehicle is raised for an oil change.

When you operate a vehicle with the trunk open, airﬂow can pull exhaust gas into the interior and create a hazardous condition. If you must drive with the trunk open, open all the windows and set the climate control system as shown below:

1. Select the fresh air mode.

2. Select the mode.

3. Set the fan speed to high.

4. Set the temperature control to a comfortable setting. Adjust the climate control system in the same manner if you sit in your

parked vehicle with the engine running.

Carbon monoxide gas is toxic. Breathing it can cause unconsciousness and even kill you. Avoid any enclosed areas or activities that expose you to carbon monoxide.

An enclosed area such as a garage can quickly ﬁll up with carbon monoxide gas. Do not run the engine with the garage door closed. Even when the garage door is open, drive out of the garage immediately after starting the engine.

Seat Belts

A seat belt is your best protection in all types of collisions. Airbags are designed to supplement seat belts, not replace them. So even though your vehicle is equipped with airbags, make sure you and your passengers always wear your seat belts and wear them properly.

Lap/Shoulder Seat Belts

All ﬁve seating positions are equipped with lap/shoulder seat belts with emergency locking retractors. In normal driving, the retractor lets you move freely while keeping some tension on the belt. During a collision or sudden

SAFETY INFORMATION

4 |

stop, the retractor locks to restrain your body. The front passenger's and rear seat belts also have a lockable retractor for use with child seats.

n Proper Use of Seat Belts

Follow these guidelines for proper use:

• All occupants should sit upright, well back in the seat, and remain in the position for the duration of the trip. Slouching and leaning reduces the effectiveness of the belt and can increase the chance of serious injury in a crash.

• Never place the shoulder part of a lap/shoulder seat belt under your arm or behind your back. This could cause very serious injuries in a crash.

• Two people should never use the same seat belt. If they do, they could be very seriously injured in a crash.

• Do not put any accessories on the seat belts. Devices intended to improve comfort or reposition the shoulder part of a seat belt can reduce the protective capability and increase the chance of serious injury in a crash.

• No one should sit in a seat with an inoperative seat belt or one that does not appear to be working correctly. Using a seat belt that is not working properly may not protect the occupant in a crash. Have a dealer check the belt as soon as possible.

Not wearing a seat belt properly increases the chance of a serious injury or death in a crash, even though your vehicle has airbags.

Be sure you and your passengers always wear seat belts and wear them properly.

n Seat Belt Inspection

Regularly check the condition of your seat belts as follows:

• Pull each belt out fully and look for frays, cuts, burns, and wear.

• Check that the latch plates and buckles work smoothly and the belts retract easily. If a belt does not retract easily, cleaning the belt may correct the problem. Only use mild soap and warm water. Do not use bleach or cleaning solvents. Make sure the belt is completely dry before allowing it to retract.

Any belt that is not in good condition or working properly will not provide proper protection and should be replaced as soon as possible.

SAFETY INFORMATION

| 5

A belt that has been worn during a crash may not provide the same level of protection in a subsequent crash. Have your seat belts inspected by a dealer after any collision.

Not checking or maintaining seat belts can result in serious injury or death if the seat belts do not work properly when needed.

Check your seat belts regularly and have any problem corrected as soon as possible.

Fastening a Seat Belt

Adjust your seat to the proper position and then follow the steps below:

1. Pull the seat belt out slowly.

2. Insert the latch plate into the buckle, then tug on the belt to make sure the buckle is secure. Make sure that the belt is not twisted or caught on anything.

3. Position the lap part of the belt as low as possible across your hips, then pull up on the shoulder part of the belt so the lap part ﬁts snugly. This lets your strong pelvic bones take the force of a crash and reduces the chance of internal inquiries.

4. If necessary, pull up on the belt again to remove any slack, then make sure that the belt rests across the center of your chest and over your shoulder. This spreads the forces of a crash over the strongest bones in your upper body.

SAFETY INFORMATION

6 |

To release the belt, push the red PRESS button then guide the belt by hand until it has retracted completely.

Improperly positioning the seat belt can cause serious injury or death in a crash.

Make sure all seat belts are properly positioned before driving.

n Adjusting the Shoulder Anchor

The front seats have adjustable shoulder anchors to accommodate taller and shorter occupants.

1. Move the anchor up and down while holding the release button.

2. Position the anchor so that the belt rests across the center of your chest and over your shoulder.

Airbags

Your vehicle is equipped with several types of airbags: front airbags, side airbags, and side curtain airbags.

Front Airbags (SRS)

The front SRS airbags inﬂate in a moderate-to-severe frontal collision to help protect the head and chest of the driver and/or front passenger. They are housed in the center of the steering wheel for the driver and in the dashboard for the front passenger. Both airbags are marked SRS AIRBAG.

SRS (Supplemental Restraint System) indicates that the airbags are designed to supplement seat belts, not replace them. Seat belts are the occupant's primary restraint system.

Front Knee Airbags

The knee SRS airbags inﬂate in a moderate-to-severe front collision to help keep the driver and/or front passenger in the proper position and to help maximize the beneﬁt provided by the vehicle's other safety features.

n Advanced Airbags

The airbags have advanced features to help reduce the likelihood of airbag related injuries to smaller occupants.

SAFETY INFORMATION

| 7

The driver's advanced airbag system includes a seat position sensor. Based on information from this sensor and the severity of the impact, the advanced airbag system determines the optimal deployment of the driver's airbag.

The front passenger's advanced airbag system has weight sensors. We advise against allowing a child age 12 or under to ride in the front

passenger's seat. However, if you do allow a child age 12 or under to ride in the front passenger's seat, note that the system will automatically turn off the front passenger's airbag if the sensors detect that the child is approximately 65 lbs (29 kg) or less.

For the advanced airbags to work properly:

• Do not spill any liquid on or under the seats.

• Do not put any object under the passenger's seat.

• Make sure any objects are positioned properly on the ﬂoor. Improperly positioned objects can interfere with the advanced airbag sensors.

• All occupants should sit upright and wear their seat belts properly.

• Do not cover the passenger's side dashboard with a cloth, towel, cover, etc.

n Side Airbags

The side airbags help protect the upper torso and pelvis of the driver or a front passenger during a moderate-to-severe side impact. They are housed in the outside edge of the driver's and front passenger's seat-backs. Both are marked SIDE AIRBAG.

n Side Curtain Airbags

Side curtain airbags help protect the heads of the driver and passengers in outer seating positions during a moderate-to-severe side impact. The side curtain airbags equipped in this vehicle are also designed to help reduce the likelihood of partial and complete ejection of vehicle occupants through side windows in crashes, particularly rollover crashes.

SAFETY INFORMATION

8 |

The side curtain airbags are located in the ceiling above the side windows on both sides of the vehicle.

The side curtain airbags are deigned to deploy in a rollover or moderate-to- severe side impact. If the SRS control unit senses that your vehicles is about to roll over, it immediately deploys both side curtain airbags and activates both front seat belt tensioners. If the impact is on the passenger's side, the passenger's side curtain airbag will inﬂate even if there are no occupants on that side of the vehicle.

To get the best protection from the side curtain airbags, occupants should wear their seat belts properly and sit upright and well back in their seats.

Do not attach any objects to the side windows or roof pillars, as they can interfere with the proper operation of the side curtain airbags.

When side curtain airbags deploy in a frontal collision

One or both side curtain airbags may inﬂate in a moderate-to-severe angled frontal collision.

n Important Facts About Your Airbags

Always wear your seat belt properly, sit upright, and as far back from the steering wheel as possible while allowing full control of the vehicle. A front passenger should move their seat as far back from the dashboard as possible.

Do not place hard or sharp objects between yourself and a front airbag. Carrying hard or sharp objects on your lap, or driving with a pipe or other sharp object in your mouth, can result in injuries if your front airbag inﬂates.

Do not attach or place objects on the front airbag covers. Objects on the covers marked SRS AIRBAG could interfere with the proper operation of the airbags or be propelled inside the vehicle and hurt someone if the airbags

inﬂate.

SAFETY INFORMATION

| 9

Do not attach accessories on or near the side airbags. They can interfere with the proper operation of the airbags or hurt someone if an airbag

inﬂates.

Do not attach any objects to the side windows or roof pillars. They can interfere with the proper operation of the side curtain airbags.

Do not cover or replace the front seat-back covers. This can prevent your side airbags from properly deploying during a side impact.

An open glove box can cause serious injury to your passenger in a crash, even if the passenger is wearing the seat belt.

Always keep the glove box closed while driving.

n Airbag System Indicators

If a problem occurs in the airbag system, the SRS indicator comes on and a message appears on the Driver Information Interface .

Supplemental Restraint System (SRS) Indicator

If the indicator comes on at any other time besides vehicle start-up or does not come on at all, have the system checked by a dealer as soon as possible. If you don't, your airbags and seat belt tensioners may not work properly when they are needed.

Ignoring the SRS indicator can result in serious injury or death if the airbag systems or tensioners do not work properly.

Have your vehicle checked by a dealer as soon as possible if the SRS indicator alerts you to a possible problem.

Passenger Airbag Off Indicator

SAFETY INFORMATION

10 |

The indicator comes on to alert you that the front passenger’s front airbag has been turned off. This occurs when the front passenger’s weight sensors detect 65 lbs (29 kg) or less, the weight of an infant or small child, on the seat.

Children age 12 or under should always ride properly restrained in a back seat.

If the front passenger‘s seat is empty, the indicator will come on and, in the event of a crash, the front passenger's airbag will not deploy. The front passenger's knee airbag will not deploy either.

To ensure the passenger is detected properly, conﬁrm that:

• There is no child seat or other object pressing against the rear of the seat-back.

• There is no rear passenger pushing or pulling on the back of the front passenger's seat.

• The front seat or seat-back is not forced back against an object on the seat or ﬂoor behind it.

• There is no object placed under or beside the front passenger's seat.

• The occupant is sitting in an upright position and the seat-back is not excessively reclined.

• The occupant is not leaning against the door or center console.

• The occupant's feet are placed on the ﬂoor in front of them.

• There are no objects hanging from the front passenger's seat.

• Only small, lightweight objects are in the seat-back pocket.

If none of these conditions exist, have your vehicle checked by a dealer as soon as possible.

The passenger airbag off indicator may come on and go off repeatedly if the total weight on the seat is near the airbag cutoff threshold.

n Airbag System Components

SAFETY INFORMATION

| 11

1. Two SRS (Supplemental Restraint System) front airbags. The driver’s airbag is stored in the center of the steering wheel; the front passenger’s airbag is stored in the dashboard. Both are marked SRS AIRBAG.

2. Two front knee airbags. The driver's knee airbag is stored under the steering column; the front passenger's knee airbag is stored under the glove box. Both are marked SRS AIRBAG.

3. Two side airbags, one for the driver and one for a front passenger. The airbags are stored in the outer edges of the seat-backs. Both are marked SIDE AIRBAG.

4. Two side curtain airbags, one for each side of the vehicle. The airbags are stored in the ceiling, above the side windows. The front and rear pillars are marked SIDE CURTAIN AIRBAG.

5. An electronic control unit that, when the vehicle is on, continually monitors information about the various impact sensors, seat and buckle sensors, rollover sensor, airbag activators, seat belt tensioners, and other vehicle information. During a crash event the unit can record such information.

6. Automatic front seat belt tensioners. The driver’s and front passenger’s seat belt buckles incorporate sensors that detect whether or not the belts are fastened.

7. A driver’s seat position sensor. This sensor determines the optimal force at which the airbag will deploy in a crash.

8. Weight sensors in the front passenger’s seat. The front passenger’s airbag will be turned off if the weight on the seat is about 65 lbs (29 kg) or less (the weight of an infant or small child).

SAFETY INFORMATION

12 |

9. Impact sensors that can detect a moderate-to-severe front or side impact.

10. An indicator on the instrument panel that alerts you to a possible problem with the airbag system or seat belt tensioners.

11. A rollover sensor that can detect if your vehicle is about to roll over and signal the control unit to deploy both side curtain airbags.

n Airbag Care

You do not need to, and should not, perform any maintenance on or replace any airbag system components yourself. However, you should have your vehicle inspected by a dealer in the following situations:

When the airbags have deployed

If an airbag has inﬂated, the control unit and other related parts must be replaced. Similarly, once an automatic seat belt tensioner has been activated, it must be replaced.

When the vehicle has been in a moderate-to-severe collision

Even if the airbags did not inﬂate, have your dealer inspect the following: the driver’s seat position sensor, weight sensors in the passenger’s seat, front seat belt tensioners, and each seat belt that was worn during the crash.

Do not remove or modify a front seat without ﬁrst consulting a dealer

This would likely disable or affect the driver’s seat position sensor or the weight sensors in the passenger’s seat. If it is necessary to remove or modify a front seat to accommodate a person with disabilities, contact a Honda dealer. For U.S. vehicles, call Honda Automobile Customer Service at (800) 999-1009. For Canadian vehicles, call Honda Canada Customer Relations at (888) 946-6329.

Child Safety

Each year, many children are injured or killed in vehicle crashes because they are either unrestrained or not properly restrained. In fact, vehicle collisions are the number one cause of death of children ages 12 and under.

The National Highway Trafﬁc Safety Administration and Transport Canada recommend that all children ages 12 and under be properly restrained in a rear seat. Some states or provinces/territories have laws restricting where children may ride.

SAFETY INFORMATION

| 13

To reduce the number of child deaths and injuries, every state, Canadian province, and territory requires that infants and children be properly restrained when they ride in a vehicle.

n Protecting Child Passengers – Important Considerations

• An inﬂating front or side airbag can injure or kill a child sitting in the front seat.

• A child in the front seat is more likely to interfere with the driver's ability to safely control the vehicle.

• Statistics show that children of all sizes and ages are safer when they are properly restrained in a rear seat.

• Any child who is too small to wear a seat belt correctly must be restrained in an approved child seat that is properly secured to the vehicle using either the lap belt portion of the lap/shoulder belt or the lower anchors of the LATCH system.

• Never hold a child on your lap because it is impossible to protect them in the event of a collision.

• Never put a seat belt over yourself and a child. During a crash, the belt would likely press deep into the child and cause serious or fatal injuries.

• Never let two children use the same seat belt. Both children could be very seriously injured in a crash.

• Do not allow children to operate the doors, windows, or seat adjustments.

• Do not leave children, pets or people needing assistance in the vehicle unattended, especially in hot weather when the inside of the vehicle can get hot enough to kill them. They could also activate vehicle controls, causing it to move unexpectedly.

Children who are unrestrained or improperly restrained can be seriously injured or killed in a crash.

Any child too small for a seat belt should be properly restrained in a child seat. A larger child should be properly restrained with a seat belt, using a booster seat if necessary.

Allowing a child to play with a seat belt or wrap one around their neck can result in serious injury or death.

Instruct children not to play with any seat belt and make sure any unused seat belt a child can reach is buckled, fully retracted, and locked.

SAFETY INFORMATION

14 |

n Protecting Infants

An infant must be properly restrained in a rear-facing, reclining child seat until the infant reaches the seat maker’s weight or height limit for the seat, and the infant is at least one year old. Many experts recommend use of a rear-facing seat for a child up to two years old if the child’s height and weight are appropriate for a rear-facing seat.

Child seats must be placed and secured in a rear seating position. Rear- facing child seats should never be installed in a forward-facing position. When properly installed, a rear-facing child seat may prevent the driver or a front passenger from moving their seat all the way back, or from locking their seat-back in the desired position.

Make sure that there is no contact between the child seat and the seat in front of it. It can also interfere with proper operation of the front passenger’s advanced front airbag system. If this occurs, we recommend that you install the child seat directly behind the front passenger’s seat, move the seat as far forward as needed, and leave it unoccupied. Or, you may wish to get a smaller rear-facing child seat.

Placing a rear-facing child seat in the front seat can result in serious injury or death during a crash. Always place a rear-facing child seat in the rear seat, not the front.

n Protecting Smaller Children

If a child is at least one year old and within the weight range indicated by the child seat manufacturer, the child should be properly restrained in a ﬁrmly secured forward-facing child seat.

We strongly recommend placing a forward-facing child seat in a rear seating position. Placing a forward- facing child seat in the front seat can be hazardous, even with advanced front airbags that automatically turn the

SAFETY INFORMATION

| 15

passenger’s front airbag off. A rear seat is the safest place for a child.

Placing a forward-facing child seat in the front seat can result in serious injury or death if the front airbag inﬂates.

If you must place a forward-facing child seat in front, move the vehicle seat as far back as possible, and properly restrain the child.

n Selecting a Child Seat

Most child seats are LATCH-compatible (Lower Anchors and Tethers for CHildren). Some have a rigid-type connector, while others have a ﬂexible- type connector. Both are equally easy to use. Some existing and previously owned child seats can only be installed using the seat belt. Whichever type you choose, follow the child seat manufacturer’s use and care instructions as well as the instructions in this guide. Proper installation is key to maximizing your child’s safety.

In seating positions and vehicles not equipped with LATCH, a LATCH compatible child seat can be installed using the seat belt and a top tether for added security. This is because all child seats are required to be designed so that they can be secured with a lap belt or the lap part of a lap/ shoulder belt. In addition, the child seat manufacturer may advise that a seat belt be used to attach a LATCH-compatible seat once a child reaches a speciﬁed weight. Please read the child seat owner’s manual for proper installation instructions.

Important considerations when selecting a child seat Make sure the child seat meets the following three requirements:

• The child seat is the correct type and size for the child.

• The child seat is the correct type for the seating position.

• The child seat is compliant with Federal Motor Vehicle Safety Standard 213 or Canadian Motor Vehicle Safety Standard 213.

n Installing a LATCH-Compatible Child Seat

A LATCH-compatible child seat can be installed in any of the rear seats. A child seat is attached to the lower anchors with either the rigid or ﬂexible type of connectors.

SAFETY INFORMATION

16 |

1. Locate the anchor marks afﬁxed to the base of the seat cushion.

2. Pull out the anchor covers under the marks to expose the lower anchors.

3. Place the child seat on the vehicle seat, then attach the child seat to the lower anchors according to the instructions that came with the child seat. Make sure that the lower anchors are not obstructed by the seat belt or any other object.

4. Open the tether anchor cover behind the head restraint.

5. Seats in the outer positions with adjustable headrest: Put the outer head restraint to its highest position, then route the tether strap between the head restraint legs, and secure the tether strap hook to the anchor. Make sure the strap is not twisted.

SAFETY INFORMATION

| 17

6. Seats in the outer positions with straight top tether type and ﬁxed headrest: Route the tether strap over the top of the head restraint and secure the tether strap hook to the anchor. Make sure the strap is not twisted.

Seats in the outer positions with other top tether type and ﬁxed headrest: Route the tether strap over the side of the head restraint and secure the tether strap hook to the anchor. Make sure the strap is not twisted.

7. Tighten the tether strap as instructed by the child seat manufacturer.

8. Make sure the child seat is ﬁrmly secured by rocking it forward and back and side to side; little movement should be felt.

9. Make sure any unused seat belt that a child can reach is buckled, the lockable retractor is activated, and the belt is fully retracted and locked.

Never attach two child seats to the same anchor. In a collision, one anchor may not be strong enough to hold two child seats attachments and may break, causing serious injury or death.

Do not use the lower inner anchors of the outer rear seats to secure a LATCH-compatible child seat to the rear center seat, unless the child seat manufacturer's instructions for that system permit the use of inner anchors with the stated spacing.

Installing a LATCH-compatible child seat in the rear center seat

Each outer rear seat is equipped with a pair of lower anchors which are used to secure a LATCH-compatible child seat. The rear center seat, however, is not equipped with anchors of any kind.

The inner and outer anchors are spaced apart at a standard distance of 11 inches (280 mm).

SAFETY INFORMATION

18 |

The distance between the two inner anchors is:

• 15.4 inches (390 mm).

LATCH-compatible restraint systems that are ﬁtted with rigid-type attachments cannot be installed in the rear center seat. However, a system ﬁtted with ﬂexible-type attachments can be installed in the center seat, provided that the child seat manufacturer’s instructions for that system permit the use of the inner anchors with the stated spacing.

Before seating a child, make sure that the system is properly attached to both the lower anchors and tether anchors.

n Installing a Child Seat with a Lap/Shoulder Seat Belt

A child seat can be installed with a lap/shoulder belt in any rear seat or, if absolutely necessary, the front passenger seat.

1. Place the child seat on the vehicle seat.

2. Route the seat belt through the child seat according to the seat manufacturer’s instructions, and insert the latch plate into the buckle. Insert the latch plate fully until it clicks.

3. Slowly pull the shoulder part of the belt all the way out until it stops. This activates the lockable retractor.

4. Let the seat belt retract a few inches and check that the retractor has switched modes by pulling on the webbing. It should not pull out again until it is reset by removing the latch plate from the buckle. If you are able to pull the shoulder belt out, the lockable retractor is not activated. Pull the seat belt all the way out, and repeat steps 3 – 4.

SAFETY INFORMATION

| 19

5. Grab the shoulder part of the seat belt near the buckle, and pull up to remove any slack from the lap part of the belt. When doing this, place your weight on the child restraint system and push it into the vehicle seat.

6. Make sure the child restraint system is ﬁrmly secured by rocking it forward and back, and side to side; little movement should be felt.

n Adding Security with a Tether

A tether anchorage point is provided behind each rear seating positions. If you have a child restraint system that comes with a tether but can be installed with a seat belt, the tether may be used for additional security.

1. Locate the appropriate tether anchorage point and lift the cover.

2. Route the tether strap over the head restraint. Make sure the strap is not twisted.

SAFETY INFORMATION

20 |

3. Secure the tether strap hook onto the anchor. Make sure the strap is not twisted.

4. Tighten the tether strap as instructed by the child seat manufacturer.

Note: Always use a tether for forward facing child seats when using the seat belt or lower anchors.

Protecting Larger Children

When a child is too big for a child seat, secure the child in a rear seat using the lap/shoulder seat belt.

Have the child sit upright and all the way back, then ensure the following:

• The child’s knees bend comfortably over the edge of the seat.

• The shoulder belt crosses between the child’s neck and arm.

• The lap part of the seat belt is as low as possible, touching the child’s thighs.

• The child can stay seated for the whole trip.

If a lap/shoulder belt cannot be used properly, position the child in a booster seat in a rear seating position. For the child’s safety, check that the child meets the booster seat manufacturer’s recommendations.

Some U.S. states and Canadian provinces/territories require children to use a booster seat until they reach a given age or weight (e.g., 6 years or 60 lbs).

SAFETY INFORMATION

| 21

Be sure to check current laws in the state or province/territory where you intend to drive.

Allowing a child age 12 or under to sit in the front can result in injury or death if the passenger’s front airbag inﬂates.

If a larger child must ride in front, move the vehicle seat as far to the rear as possible, have the child sit up properly and wear the seat belt properly, using a booster seat if needed.

Safety Label Locations

Safety labels are in the locations shown. They warn you of potential hazards that can cause serious injury or death. Read these labels carefully.

If a label comes off or becomes hard to read (except for the U.S. dashboard label which may be removed by the owner), contact a dealer for a replacement.

Reporting Safety Defects

In the U.S. If you believe that your vehicle has a defect which could cause a crash or could

cause injury or death, you should immediately inform the National Highway Trafﬁc Safety Administration (NHTSA) in addition to notifying American Honda Motor Co., Inc.

If NHTSA receives similar complaints, it may open an investigation, and if it ﬁnds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or American Honda Motor Co., Inc.

SAFETY INFORMATION

22 |

To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to

safercar.gov

, or write to: Administrator, NHTSA,1200 New Jersey Avenue, SE., Washington, DC 20590. You can also obtain other information about motor vehicle safety from

safercar.gov

. In Canada If you believe that your vehicle has a defect which could cause a crash or could

cause injury or death, you should immediately inform Honda Canada, Inc., and you may also inform Transport Canada.

If Transport Canada receives similar complaints, it may open an investigation, and if it ﬁnds that a safety defect exists in a group of vehicles, it may lead to a recall and remedy campaign. However, Transport Canada cannot become involved in individual problems between you, your dealer, or Honda Canada, Inc.

To contact Transport Canada’s Defect Investigations and Recalls Division, you may call 1-800-333-0510. For more information on reporting safety defects or about motor vehicle safety, go to tc.gc.ca/roadsafety.

SAFETY INFORMATION

| 23

INSTRUMENT PANEL

Learn about the indicators, gauges, and displays related to driving the vehicle.

Indicators brieﬂy appear with each engine start and then go out. Red and amber indicators are most critical. Blue and green indicators are used for general information.

Malfunction Indicators

These are the most critical indicators. If they come on and stay lit while driving or at any other time, there may be a problem. See your dealer if necessary.

U.S.

Canada

Brake system

• Brake ﬂuid is low.

• There is a malfunction in the brake system. Press the brake pedal lightly to check pedal pressure. If normal, check the brake ﬂuid level when you stop. If abnormal, take immediate action. If necessary, downshift the transmission to slow the vehicle using engine braking. Have your vehicle repaired immediately.

Low oil pressure Engine oil pressure is low. Stop in a safe place. Open the hood, check the oil level and add oil if necessary. If the indicator does not turn off, have your vehicle repaired immediately.

12-Volt Battery Charging system The 12-volt battery is not charging. Turn all electrical items off,

but do not turn the vehicle off to prevent further battery discharge. Have your vehicle repaired immediately.

Supplemental Restraint System (SRS) There is a problem with one of the airbag systems or seat belt

tensioners.

INSTRUMENT PANEL

24 |

Smart Entry System

There is a problem with the system.

Lane Keeping Assist System (LKAS) There is a problem with the system.

Malfunction Indication Lamp (check engine light) The emissions control system may have a problem, or the fuel

cap is missing or loose. If the indicator blinks, a misﬁre in the engine’s cylinders is detected. Stop in a safe place and wait for the engine to cool down.

Anti-lock Brake System (ABS) There is a problem with the anti-lock brake system. Your vehicle

still has normal braking ability, but no anti-lock function.

Low Tire Pressure / Tire Pressure Monitoring System (TPMS)

• Blinks and remains on: Have your vehicle checked by a dealer. If the vehicle is ﬁtted with a compact spare, get your regular tire repaired or replaced and put back on your vehicle as soon as you can.

Vehicle Stability Assist® (VSA®) System There is a problem with the VSA® or hill start assist system.

Blind Spot Information

There is a problem with the system, or the sensor is blocked.

Electric Power Steering (EPS) There is a problem with the system. Stop the vehicle in a safe

place, and restart the engine.

Adaptive Cruise Control (ACC)*1 with Low Speed Follow

There is a problem with the system.

Condition Indicators

These indicators may require you to perform an action.

*1 - If equipped

INSTRUMENT PANEL

| 25

U.S.

Canada

Parking Brake Release the parking brake before driving. You will hear a beep if

you drive with it not fully released.

Seat Belt Reminder Make sure seat belts are fastened for you and all passengers.

The indicator blinks and beeps sound continuously if you or your front passenger has not fastened your seat belts when you begin driving. If the indicator remains on after seat belts are fastened, see your dealer.

Low Fuel Refuel as soon as possible. If the indicator blinks, there is a

problem with the fuel gauge. See your dealer.

Low Tire Pressure / Tire Pressure Monitoring System (TPMS)

• Comes on while driving: Stop in a safe place, check tire pressures, and inﬂate tire(s) if necessary.

System Message When a condition or malfunction indicator comes on, a message

also appears on the driver information interface (DII). Check the display for more information.

Immobilizer Your key or remote transmitter cannot be recognized by the

vehicle. If the indicator blinks, you may not be able to start the engine. Turn the vehicle off, and then on again. If it continues to blink, there may be a problem with the system. See your dealer.

On/Off Indicators

These indicators remind you when an item is on or off.

VSA® off

VSA® engaged (blinks)

LKAS on

ACC*1 on

*1 - If equipped

INSTRUMENT PANEL

26 |

Turn signals/hazards on

Fog lights*1 on

High beams on

Exterior lights on

Auto High Beam System on

ECON mode on

*1 - If equipped

INSTRUMENT PANEL

| 27

Driver Information Interface

Consists of several displays that provide you with useful information.

Main Display

Sub Display

Head-Up Display

Shows the current mode for ACC with LSF, tachometer, trafﬁc sign recognition system, gear position indicator, or turn-by-turn directions along with the vehicle

*1 - If equipped

INSTRUMENT PANEL

28 |

speed. You can choose which item to be displayed using the HUD button on the steering wheel. They are displayed when the power mode is in ON.

To turn the head-up display on and off: Press the HUD button on the driver side control panel.

The display can be moved up and down to come level with your eyes. To raise or lower the head-up display: Press and hold the up or down button

until the desired position is reached.

INSTRUMENT PANEL

| 29

VEHICLE CONTROLS

Learn about the various controls necessary for operating and driving the vehicle.

Using the Remote Transmitter

Lock or unlock the doors or trunk.

Note: Leaving the remote transmitter in the vehicle can result in theft or accidental movement of the vehicle. Always take it with you whenever you leave the vehicle unattended.

Smart Entry System

When you carry the remote transmitter (for example, in a pocket or purse) and it is outside the vehicle and within range (about 32 inches or 80 cm), you can lock or unlock the doors, and open the trunk without handling the transmitter.

n Unlocking/Locking the Doors

To unlock: Grab the driver’s door handle to unlock the driver’s door and fuel ﬁll door. Grab the front passenger’s door handle to unlock all the doors, fuel ﬁll door, and the trunk. You can customize this feature’s behavior.

*1 - If equipped

VEHICLE CONTROLS

30 |

To lock: Press the door lock sensor on the front door.

n Walk Away Auto Lock

When you walk away from the vehicle while carrying the remote transmitter, the doors and trunk can automatically lock if the following conditions are met:

• The remote transmitter is within a range of 5 feet (1.5 m).

• All doors and the trunk are closed.

• There is not an additional remote transmitter inside the vehicle.

Follow these steps:

1. Exit the vehicle, close the door and stay near it. Listen for a beep. The system is activated.

2. Walk at least 5 feet (1.5 m) away.

3. Listen for a beep and look for the lights to ﬂash. The doors lock.

The auto lock function is set to OFF as the factory default setting. The auto lock function can be set to ON using the audio/information screen. If you set the auto lock function to ON using the audio/information screen, only the remote transmitter that was used to unlock the driver's door prior to the setting change can activate auto lock. To turn on this feature, follow the steps below:

1. From the HOME screen, select Settings.

2. Select System.

3. Select Vehicle.

4. Select Door/Window Setup.

5. Select Walk Away Auto Lock®.

VEHICLE CONTROLS

| 31

n Customizing Door Lock and Unlock Settings

Customize the auto door lock and door unlock settings to your preference. Begin with the vehicle off.

Models with Color Audio

1. Press the MENU/CLOCK button, then select Settings.

2. Select Vehicle Settings.

3. Select Door/Window Setup.

4. Select Auto Door Lock or Auto Door Unlock then select an option.

Models with Display Audio

1. Select Home.

2. Select Settings.

3. Select Vehicle.

4. Select Door/Window Setup.

5. Select Auto Door Lock or Auto Door Unlock then select an option.

Door Operation

Use several methods to lock or unlock the doors.

Using the Lock Tab

To unlock: When you unlock either front door using the lock tab, the speciﬁc door (driver’s or passenger’s) unlocks.

To lock: When you lock the door using the lock tab on the driver’s door, all the other doors and the trunk lock at the same time. When you lock the door using the lock tab on the front passenger’s door, only that door locks.

n Using the Front Door Inner Handle

VEHICLE CONTROLS

32 |

Pull the front door inner handle. The door unlocks and opens in one motion. Unlocking and opening the driver’s door from the inner handle unlocks all other doors and trunk.

Do not pull a front door inner handle while the vehicle is moving.

n Using the Master Door Lock Switch

To unlock: Press the unlock side of the switch to unlock all doors and the trunk.

To lock: Press the lock side of the switch to lock all doors and the trunk.

n Childproof Door Locks

The childproof door locks prevent the rear doors from being opened from the inside regardless of the position of the lock tab.

Slide the lever in the rear door to the lock position, and close the door.

Open the door using the outer door handle.

Note: To open the door from the inside when the childproof door lock is on, put the lock tab in the unlock position, lower the rear window, put your hand out of the window, and pull the outside door handle.

VEHICLE CONTROLS

| 33

n Using the Trunk Opener

Press and hold the trunk opener button on the driver's door to unlock and open the trunk.

Power Window Operation

The power windows can be opened and closed by using the switches on the doors when the vehicle is on. The switches on the driver’s side can be used to open and close all the windows.

n Automatic Operation

To open: Push the switch down ﬁrmly. To close: Pull the switch up ﬁrmly. The window opens or closes

completely. To stop the window at any time, push or pull the switch again

brieﬂy.

Manual Operation

To open: Push the switch down lightly. To close: Pull the switch up lightly. Release the switch when the windows reach the desired position.

n Power Window Lock

Push in the power window lock button so only the driver’s window can be operated.

Closing a power window on someone’s hands or ﬁngers can cause serious injury.

Make sure your passengers are away from the windows before closing them.

VEHICLE CONTROLS

34 |

Power Moonroof*1 Operation

The moonroof can be opened and closed when the vehicle is on by using the switch on the ceiling.

n Automatic Operation

To open: Firmly push the switch back, then release.

To close: Firmly push the switch forward, then release.

The moonroof opens or closes completely. To stop the moonroof at any time, push the switch brieﬂy.

n Manual Operation

To open: Pull the switch back lightly. To close: Push the switch forward lightly. Release the switch when the window reaches the desired position.

n Moonroof Tilt

To tilt: Push the center of the switch. To close: Push the switch forward ﬁrmly, then release.

Closing the moonroof on someone’s hands or ﬁngers can cause serious injury.

Make sure your passengers are away from the moonroof before closing it.

Interior and Exterior Lights

Operate interior and exterior lights when the vehicle is on or off.

*1 - If equipped

VEHICLE CONTROLS

| 35

n Brightness Control

Adjust instrument panel brightness when the vehicle is on.

To brighten: Turn the dial up. To dim: Turn the dial down. A beep sounds when the brightness

reaches its minimum or maximum.

n Interior Lights

Change the interior light settings using the switches on the ceiling.

ON position: Interior lights remain on. Door-activated position: Interior lights come on when any of the doors are

opened, the driver’s door is unlocked, or the vehicle is turned off. OFF position: Interior lights remain off.

Map Lights

Press the map lights to turn on or off.

VEHICLE CONTROLS

36 |

n Exterior Lights

Rotate the switches on the lever to operate the exterior lights. Push the lever forward to turn on the high beams. Return the lever to its original position for low beams.

OFF: All exterior lights are off.

Turn on exterior lights except headlights.

AUTO: Turn on the automatic lighting feature. Headlights turn on or off

depending on ambient brightness when the vehicle is on. Headlights automatically come on after the wipers are engaged for a certain time. The headlights come on when you unlock a door in dark areas with the headlight switch in AUTO.

Turn on all exterior lights including headlights.

Turn fog lights*1 on or off.

One-Touch Turn Signal

Use this quick and convenient method to signal a lane change.

Lightly push the turn signal lever up or down for a three-blink sequence.

For a continuous signal, push the lever up or down until it locks into place.

Auto High Beam

The front sensor camera detects the light sources ahead of the vehicle such as the lights of a preceding or oncoming vehicle, or street lights. When you are driving at night, the system automatically switches the headlights between low beam and high beam depending on the situation.

*1 - If equipped

VEHICLE CONTROLS

| 37

For the system to work properly:

• Do not place an object that reﬂects light on the dashboard.

• Keep the windshield around the camera clean. When cleaning the windshield, be careful not to apply windshield cleanser to the camera lens.

• Do not attach an object, sticker or ﬁlm in the area around the camera.

• Do not touch the camera lens.

If the camera receives a strong impact or requires repair, consult a dealer. If you see the message “Some Driver Assist Systems Cannot Operate: Clean

Front Windshield", park your vehicle in a safe place. Wipe away debris blocking the windshield, then start driving again. If the message remains even after driving for a while with the clean windshield, have your vehicle checked by a dealer.

If you see a message that the camera is too hot, use the climate control system to cool the interior. Defroster mode will direct airﬂow toward the camera.

n Automatically switching between high beam and low beam

When auto high beam is active, the headlights switch between high beam and low beam based on the following conditions.

If you ﬁnd the timing of beam changes inconvenient for driving, change the beams manually.

Switching to high beam

All of the following conditions must be met before the high beams turn on.

• Your vehicle speed is 25 mph (40 km/h) or more.

• There are no preceding or oncoming vehicle with headlights or taillights turned on.

• There are few street lights on the road ahead.

Switching to low beam

One of the following conditions must be met before the low beams turn on.

VEHICLE CONTROLS

38 |

• Your vehicle speed is 15 mph (24 km/h) or less.

• There is a preceding or oncoming vehicle with headlights or taillights turned on.

• There are many street lights on the road ahead.

n Manually switching between high beam and low beam

If you want to manually switch the headlights between high beam and low beam, follow either of the procedures below. Note that when you do this, the auto high beam indicator will turn off and the auto high beam will be deactivated.

Using the lever:

Pull the lever toward you for ﬂashing the high beams then release it within about one second while driving. To reactivate the auto high beam, pull the lever toward you for ﬂashing the high beams then release it while driving. The auto high beam indicator will come on.

Using the light switch:

Turn the light switch to . To reactivate the auto high beam, turn the light switch to AUTO when the lever is in the low beam position, the auto high beam indicator will come on.

Turning the System On or Off

Make sure the headlight lever is in the low beam position with the switch rotated to the AUTO position. The auto high beam system indicator comes on.

To turn the system on:

Pull and hold the headlight lever toward you for about 30 seconds, until the indicator ﬂashes once.

To turn the system off:

Pull and hold the headlight lever toward you for about 40 seconds, until the indicator ﬂashes twice.

Wiper Operation

The windshield wipers and washers can be used when the vehicle is on.

n Front Wipers

VEHICLE CONTROLS

| 39

Move the wiper lever up or down to the desired position.

n Headlight Integration with Wipers

When the headlights are in the AUTO position, they automatically turn on when the front wipers operate several times within a certain interval. The headlights turn off shortly after the wipers are turned off or if there is enough ambient light.

Intermittent (INT) Wipers

When you move the lever to the INT position, the wipers operate based on the delay adjustment.

Rotate the adjustment ring to adjust the wiper delay.

Automatic Intermittent Wipers

When you move the lever to the AUTO position while driving in rainy weather, the wipers operate based on the amount of detected rainfall.

*1 - If equipped

VEHICLE CONTROLS

40 |

Rotate the adjustment ring to adjust the rainfall sensor sensitivity. Set the wipers to OFF when the rain stops.

Ensure the wiper lever is in the OFF position before entering a car wash or cleaning the windshield. Wiper-system damage may happen otherwise.

Do not use the wipers when the windshield is dry. The windshield will get scratched, or the rubber blades will get damaged.

In cold weather, the blades may freeze to the windshield, becoming stuck. Operating the wipers in this condition may damage the wipers. Use the defroster to warm the windshield, or manually clear the windshield of ice and snow before turning on the wipers.

Adjusting the Front Seats

Adjust the driver’s seat as far back as possible while allowing you to maintain full control of the vehicle. You should be able to sit upright and well back in the seat, adequately press the pedals without leaning forward, and grip the steering wheel comfortably. The passenger’s seat should be adjusted so that it is as far back from the front airbag in the dashboard as possible.

The National Highway Trafﬁc Safety Administration and Transport Canada recommends that drivers allow at least 10 inches (25 cm) between the center of the steering wheel and the chest.

Front Power Seat(s)

*1 - If equipped

VEHICLE CONTROLS

| 41

Front Manual Seat(s)

*1 - If equipped

VEHICLE CONTROLS

42 |

Lumbar Support Adjustment Switch

Press the top: To move the lumbar support up.

Press the bottom: To move the lumbar support down.

Press the front: To increase the entire lumbar support.

Press the rear: To decrease the entire lumbar support.

Sitting too close to a front airbag can result in serious injury or death if the front airbags inﬂate.

Always sit as far back from the front airbags as possible while maintaining control of the vehicle.

Driving Position Memory System

You can store two driver’s seat (except for power lumbar), positions with the driving position memory system.

When you unlock and open the driver’s door with a remote transmitter, the seat adjusts to retracted positions of one of the two preset positions automatically.

The seat will move to the stored position when you set the power mode to ACCESSORY.

*1 - If equipped

VEHICLE CONTROLS

| 43

Storing a Position in Memory

1. Adjust the seat, to your preferred positions.

2. Press SET.

3. Press and hold memory button 1 or 2 within 5 seconds of pressing the SET button.

You will hear two beeps when the memory is set.

4. Press one of the memory buttons to recall previously stored positions.

Adjusting the Head Restraints

Your vehicle is equipped with head restraints in all seating positions. Head restraints are most effective for protection against whiplash and other rear-impact crash injuries.

The center of the back of the occupant’s head should rest against the center of the restraint. The tops of the occupant’s ears should be level with the center height of the restraint.

For a head restraint system to work properly:

• Do not hang any items on the head restraints or from the restraint legs.

• Do not place any objects between an occupant and the seat-back.

• Install each restraint in its proper location.

Improperly positioning head restraints reduces their effectiveness and increases the likelihood of serious injury in a crash.

Make sure head restraints are in place and positioned properly before driving.

VEHICLE CONTROLS

44 |

n Adjusting the Front Head Restraints

To raise the head restraint: Pull it upward.

To lower the head restraint: Push it down while pressing the release button.

n Adjusting the Rear Outer *1 Head Restraints

To raise the head restraint: Pull it upward.

To lower the head restraint: Push it down while pressing the release button.

n Removing and Reinstalling the Head Restraints

Head restraints can be removed for cleaning or repair.

To remove the head restraint:

Pull the restraint up as far as it will go. Then push the release button(s), and pull the restraint up and out.

To reinstall a head restraint:

Insert the legs back in place, then adjust the head restraint to an appropriate height while pressing the release button(s). Pull up on the restraint to make sure it is locked in position.

Failure to reinstall, or correctly reinstall, the head restraints can result in severe injury during a crash.

Always replace the head restraints before driving.

Adjusting the Rear Seats

The rear seat-back(s*1) can be folded down to make room for large items in the trunk.

*1 - If equipped

VEHICLE CONTROLS

| 45

n Folding Down the Rear Seats

The rear seat back(s)*1 can be folded down to accommodate bulkier items in the trunk .

To fold down the seat:

1. Remove the center shoulder belt

from the guide.

2. Pull the release lever in the trunk to

release the lock.

3. Fold down the seat back. To lock a seat-back upright, push it

backwards until it locks, so that the red tabs in the release lever go down.

When returning the seat-back to its original position, push it ﬁrmly back.

Make sure that the folded seat-back does not press against the front passenger seat, as this can cause the weight sensors in the front passenger seat to work improperly.

Floor Mats

*1 - If equipped

VEHICLE CONTROLS

46 |

The driver's ﬂoor mat hooks over the ﬂoor anchors, which keep the mat from sliding forward. To remove a mat for cleaning, turn the anchor knobs to the unlock position. When reinstalling, turn the knobs to the lock position.

Do not put additional ﬂoor mats on top of the anchored mats.

Adjusting the Steering Wheel

The steering wheel height and distance from your body can be adjusted so that you can comfortably grip the steering wheel in an appropriate driving posture.

1. Push down the steering wheel adjustment lever.

2. Move the steering wheel up, down, in, or out.

3. Pull up on the steering wheel adjustment lever to lock the steering wheel in position.

Adjusting the steering wheel position while driving may cause you to lose control of the vehicle and be seriously injured in a crash.

Adjust the steering wheel only when the vehicle is stopped.

Adjusting the Mirrors

Adjust the angle of the mirrors for the best visibility when you are sitting in the correct driving position.

n Rearview Mirror with Day/Night Positions

Manually adjust the position to reduce headlight glare from vehicles behind you. Flip the tab to switch between day and night positions.

VEHICLE CONTROLS

| 47

+ 61 hidden pages