Homelite T-15 User Manual
rLniTi^® 42" FRONT BLADE
LbU U LS LM-16001-68
INSTRUCTIONS g PARTS LIST g T-15 TRACTORS
ASSEMBLY
1. Secure the push bar assembly to the blade using a king
pin and quick pin. Place the pivot pin through the bracket
on the blade assembly and push bar assembly.
2. Position the push bar assembly xmder the front of the
tractor. Attach the push bar to the rear holes in the
tractor frame extensions using a clevis pin and quick pin
on each side.
3. Place the lift lever in the forward most position. Attach
the hooked end of the lift rod to the upper hole in the
lift lever and secure with a quick pin. Adjust the set
collars on the spring end so the dog on the rod guide will
fit in the hole in the lift bracket on the push bar assembly.
Secure with a quick pin. Adjust the rear set collar so
that it is up against the spring. This assembly, will
absorb most of the shock should you strike an object
when plowing and help prevent serious damage to the
tractor.
ADJUSTMENTS
Alternate holes are provided in the blade to permit adjust
ment of the shoe assemblies for various types of ground
surfaces to be plowed. The blade should be raised when
plowing gravel drives or walks. Lower the blade when
plowing asphalt or concrete drives and walks.
The angle of the blade is adjustable to permit plowing to
either the right or left. Remove the pivot pin and angle the
blade to the desired position. Replace the pin in the hole
to secure angle of the blade.
RECOMMENDED EQUIPMENT
Front Wheel Weights
Rear Wheel Weights
Tire Chains:
T-10
T-12, T-15
NOTE: Loose mounting of tire chains will make them
self-cleaning.
LM-09904-49
LM-09907-08
LM-09903-15
LM-09905-23
Rev. 1 RART NO. 24711
42 FBT
No. Description
1
PIN-king LM-16036-02
PIN-pivot
2
BLADE ASSEMBLY-42"
3
SCREW-set, 5/16-18
4
COLLAR-set
5
6 GUIDE ASSEMBLY-rod LM-01716-79
WASHER-flat, 17/32 x 1-1/4
7
SPRING
8
ROD-lift
9
PIN-quick, 1/8 dia.
10
PIN-hitch
11
12 BAR ASSEMBLY-push
NUT-hex, 3/8-16 LM-09169-50 10
13
WASHER-lock, 3/8
14
PRINTED IN U.S. A.
Part No.
LM-16036-01
LM-01070-47
LM-09287-09
LM-80310-07
LM-09169-60
LM-01710-11
LM-16066-35 1
LM-01067-88 5
LM-01180-53 2
LM-16066-28 1
LM-0 9169-65 10
ALWAYS FURNISH MODEL AND SERIAL NUMBER WHEN ORDERING PARTS.
PORT CHESTER, NEW YORK, U.S.A. 10573
Qty.
1
1
1
2
2
1
1
1
No.
15
16
17
18
19
20
21
22
HOMELltE^
*lextronl
DIVISION
Description
SHOE ASSEMBLY
PLATE-wear
BOLT-rd.hd., 3/8-16 x 3/4
BOLT-rd. hd., 3/8-16 x 1
DEFLECTOR-snow
SCREW-cap, hex hd., 1/4-20 x 1/2
WASHER-lock, 1/4
NUT-hex, 1/4-20
DECAL-shield
Accessories
PAINT-blue, 14oz. spray can
PAINT-black, 12oz. spray can
Part No.
LM-01070-24
LM-01070-45
LM-09221-10
LM-09232-32
LM-16074-23
LM-09082-95
LM-09169-64
LM-09166-22
LM-01702-52
LM-16076-89
22772
E2278EZ
Qty,
2
1
6
4
1
2
2
2
1
Loading...