Holux M-241C User Manual

HOLUX GPS Logger M-241cUser’s Manual
HOLUX
GPS LOGGER
M-241c
No.1-1, Innovation Road1, Science-based Industrial Park, Hsinchu 300, Taiwan
User’s Guide
Technology, Inc.
TEL: 886-3-6687000 FAX: 886-3-6687111
Website: www.holux.com
All Rights Reserved
HOLUX GPS Logger M-241c User’s Manual
Table of Contents
1. OVERVIEW..................................................................................................................................4
2. PACKING LIST ............................................................................................................................6
3. MAIN FEATURES .......................................................................................................................7
4. SPECIFICATION.........................................................................................................................8
5. ICONS & INDICATORS ...........................................................................................................10
6. PRODUCT OVERVIEW ........................................................................................................... 11
7. BASIC OPERATIONS ...............................................................................................................12
B
EFORE YOU USE
B
UTTON DEFINITION
H
OW TO SELECT A MODE
O
PERATIONAL FLOW
O
PERATIONAL MENU DESCRIPTION
..............................................................................................................................12
..........................................................................................................................12
.................................................................................................................. 12
.........................................................................................................................14
...................................................................................................15
8. CONNECTING THE DEVICE TO THE PC ...........................................................................23
IIII
NSTALL
NSTALL
NSTALL NSTALL
USB
USB
USBUSB
DRIVER
DRIVER
DRIVER DRIVER
........................................................................................................................23
9. TRANSFER LOG DATA TO PC............................................................................................... 24
HHHH
OLUX
OLUX
LLLL
OGGER
OGGER
OLUX OLUX
OGGER OGGER
DDDD
EVICE
EVICE
SSSS
EVICE EVICE
C
ONNECTED
TTTT
RACK
RACK
LLLL
OG
OG
RACK RACK
OG OG
U
PLOAD
............................................................................................................................................. 28
T
RACK LOG FILE STATUS
TTTT
RACK
RACK
LLLL
OG
OG
RACK RACK
OG OG
TTTT
RACK
RACK
LLLL
OG
OG
RACK RACK
OG OG
P
HOTO COMBINE SETTING
D
OWNLOAD AND UPDATE FIRMWARE
10.
INSTALLATION OF MINI GPS VIEWER PROGRAM................................................... 40
UUUU
TILITY
TILITY
................................................................................................................... 24
TILITYTILITY
ETTING
ETTING
ETTINGETTING
...............................................................................................................................25
......................................................................................................................................26
SSSS
ETTING
ETTING
.........................................................................................................................27
ETTINGETTING
................................................................................................................. 29
FFFF
ORMAT
ORMAT
.........................................................................................................................31
ORMATORMAT
PPPP
HOTO
HOTO
...........................................................................................................................32
HOTOHOTO
................................................................................................................ 35
...............................................................................................37
11. EXECUTE THE MINI GPS VIEWER PROGRAM ............................................................... 41
12.
POWER................................................................................................................................... 43
13.
WARRANTY .......................................................................................................................... 43
2
HOLUX GPS Logger M-241c User’s Manual
14.
TROUBLESHOOTING.........................................................................................................44
3
HOLUX GPS Logger M-241c User’s Manual
1. Overview
The HOLUX M-241c GPS logger provides real time coordinate logging
and easy-to-use trip guiding service. The M-241c can record up to 130,000
positions, each position including longitude, latitude, time, and altitude. The log
file can be transferred for analysis via USB connection. You can combine these
positions with your Digital camera photos to share the track histories and photo
locations to mapping application software such as Google Earth.
Position information, moving speed, free logging volume and the date &
time can be shown on the LCD display directly at any time. The M-241c
supports distance and time logging modes, kilometer and mile distance units,
and 5 languages (English, Traditional Chinese, Simplified Chinese, German,
and French).
The M-241c is a high performance GPS logger with the following features:
Powered by one AA battery.
LCD display (32mm L* 8.9mm W) to show position information, speed, capable
logging memory size, date & time.
Capable memory size to record up to 130,000 positions, including longitude,
latitude, time, and altitude.
Personal settings to select the logging mode by distance or time, unit by Kilometer
or mile, and 5 languages (English, Traditional Chinese, Simplified Chinese,
German, and French) support.
4
HOLUX GPS Logger M-241c User’s Manual
Applications:
* Vehicle tracing & Location base services
* Car navigation * Marine navigation
* Distance measurement
* Sports and Recreation
* Fleet Management
Software application program:
A user-friendly software utility is provided with the following functions:
* Transfer recorded data to PC.
* Recording mode setting (Time / Distance)
* Erase recorded data
* Output data format
(1) Save exploring data to KML file format (Interface with Google Earth)
(2) NMEA file format (*.txt)
(3) Binary file format
(4) GPX file format
5
HOLUX GPS Logger M-241c User’s Manual
2. Packing List
Thank you for purchasing the M-241c GPS logger. Before you start, make
sure that the following items are included in your package. If any of these items
are missing, please contact your original local HOLUX dealer or distributor.
1. M-241c GPS logger 1 Set
2. AA Battery 1 Set
3. Car Charger *+ USB cable 1 Set
4. User guide and Driver CD 1 Pcs
5. M-241c Quick Guide 1 Pcs
6. Warranty card 1 Pcs
7. Nylon strap 1 Pcs
Option
1. Travel power supply 1 Set
* Car Charger can only be used as the power supply adapter, it does not
have any battery charging function.
6
HOLUX GPS Logger M-241c User’s Manual
3. Main features
1. Built-in MTK Low power consumption GPS chipset.
2. 32 parallel satellite-searching channels for fast acquisition and
reacquisition.
3. Superior sensitivity, up to -159 dBm.
4. Built-in WAAS/EGNOS/MSAS Demodulator without any additional
hardware.
5. Support NMEA0183 V 3.01 data protocol
6. Compact and lightweight design for ease of use.
7. LCD display (32mm * 8.9mm /128 * 32 pixels) to show position
information, speed, capable logging memory size, date & time.
8. Capable memory size to record up to 130,000 position data, including
longitude, latitude, time, and altitude.
9. Personal setting to choose the logging mode by distance or time, unit
by Kilometer or mile, and 5 languages (English, Traditional Chinese,
Simplify Chinese, German, and French) support.
7
HOLUX GPS Logger M-241c User’s Manual
4. Specification
32 parallel satellite searching channels
Receiver: L1, 1575.42 MHz
Frequency: 1.023 MHz
Update frequency: 1 Hz.
Antenna type: Built-in
Specifications
Positioning
Satellite signal reception sensitivity: -159dBm
Dimensions: 32.1mm X 30mm X 74.5mm
Weight (excluding battery): < 39g.
Switch: Slider switch
Operating temperature: 0 to + 50
Storage temperature: -10 to + 60
Operating humidity: 5% to 90%
◆◆◆ Non DGPS (Differential GPS):::
Position : 3.0 M CEP excluding SA
Velocity: 0.1M / sec.
Interval: 0.1 sec to Sync GPS
◆◆◆◆ DGPS (EGNOS/WAAS/MSAS):::
Position: < 2.2 M., Horizontal deviation 95% time
< 5 M., Vertical deviation 95 % time
*The above data is based on the specifications of the MTK GPS chip
Time to reposition < 0.1 sec average
Positioning
Timing
Protocol and
Interface
8
Hot boot 1 sec
Warm boot 33 sec
Cold boot 36 sec
*The above data are based on specifications of the MTK GPS chip
◆◆◆◆Output port: Mini-USB (CMOS Level)
NMEA protocol output: V 3.01
Baud rate: 38400 bps
Data bits: 8
Sync bits: N
End bit: 1
Output interface:
Standard: GPGGA (1 time per second), GPGSA (1 time per second),
HOLUX GPS Logger M-241c User’s Manual
GPGSV (1 time per second), GPRMC (1 time per second), GPVTG (1
time per second).
Sea level: Max 18,000 M (60,000 feet)
Physical
Specifications
Buttons
LCD display
page
Velocity: Max 515 M./sec ( 1000 knots)
Acceleration: Max 4G
Vibration: 20 M/ second3, Max.
1 Power switch, 2 Buttons (Menu and Confirm)
System and satellite positioning status
Time
Position
Velocity
Distance measurement
Setup
9
HOLUX GPS Logger M-241c User’s Manual
5. Icons & Indicators
Position
Position
PositionPosition
Icon
Icon
IconIcon
Descriptions
Descriptions Position
DescriptionsDescriptions
Position Icon
PositionPosition
Icon Descriptions
IconIcon
Descriptions
DescriptionsDescriptions
1
1
3
4
6
Log by Time
Log by Distance
Log On
Waypoint
GPS Fix
2
4
7
8
8
Measure Distance On
Lock On
Device & PC Connected
Battery is Full
Battery is exhausted
10
HOLUX GPS Logger M-241c User’s Manual
1
2
3
4
5
6
6. Product Overview
LCD Screen
LCD Screen
LCD Screen LCD Screen
MENU Button
MENU Button
MENU Button MENU Button
ENTER Button
ENTER Button
ENTER Button ENTER Button
1
2
Power Switch
Power Switch
Power Switch Power Switch
Battery Cover
Battery Cover
Battery Cover Battery Cover
USB Port
USB Port
USB Port USB Port
3
4
5
6
11
HOLUX GPS Logger M-241c User’s Manual
7. Basic Operations
Before you use
1. If the user wants to use M-241c to record the coordinate for matching
the GPS coordinate of the picture in the camera, because the
integration of the two parties is performed under the comparison of the
time, it is recommended for the user to adjust the clock time in the
camera to match the GPS time in the M-241c.
2. M-241c does not have the water-proof feature; please pay attention to
the moisture while using it in a rainy day.
3. Before turning off, please press “stop” button to prevent log data
damaged when in logging mode.
4. Before changing a new battery,please turn off power first.
Button Definition
MENU Button
MENU Button -> Change & Select function.
MENU ButtonMENU Button
ENTER Button
ENTER Button -> Confirm your select.
ENTER ButtonENTER Button
Except during the Setting Mode, user may press the “MENU” key
and “ENTER” key at the same time, all keys function will be “LOCK”
status. Press the “MENU” key and “ENTER” key at the same time
again to cancel the “LOCK” status.
* LCD screen will show the reference button function.
How to select a mode
1. Turn on the power switch. The device will turn on and show the Track
Log Mode on the LCD.
2. There are 6 operational modes on this device. Please use the
MENU Button to change operation mode. (
( Track Log Mode
Track Log Mode ---->
( (
Track Log ModeTrack Log Mode
>
> >
Time Mode
Time Mode ---->
Time ModeTime Mode
12
> Show Position Mode
Show Position Mode ---->
> >
Show Position ModeShow Position Mode
> Show Speed & Altitude
Show Speed & Altitude
> >
Show Speed & Altitude Show Speed & Altitude
HOLUX GPS Logger M-241c User’s Manual
Mode
Mode ---->
ModeMode
Mode.
Mode. )
Mode.Mode.
> Measure Distance Mode
Measure Distance Mode ---->
> >
Measure Distance ModeMeasure Distance Mode
)
) )
::::Track Log
Track Log Mode
Track LogTrack Log
::::Time Mode
Time Mode
Time ModeTime Mode
::::Position Mode
Position Mode
Position ModePosition Mode
::::Speed & Altitude Mode
Speed & Altitude Mode
Speed & Altitude ModeSpeed & Altitude Mode
::::Measure Distance Mode
Measure Distance Mode
Measure Distance ModeMeasure Distance Mode
> Setting Mode
Setting Mode ---->
> >
Setting ModeSetting Mode
Mode
Mode Mode
> Track Log
Track Log
> >
Track Log Track Log
::::Setting Mode
Setting Mode
Setting ModeSetting Mode
13
HOLUX GPS Logger M-241c User’s Manual
Operational flow
14
HOLUX GPS Logger M-241c User’s Manual
Operational menu description
::::
Menu
Menu: Go to Time mode
MenuMenu
Enter
Enter: Start / Stop the recording GPS data.
EnterEnter
Note:
1. When power on M-241c, user will see “ ” before GPS
acquisition. After GPS is fixed, you will see the screen
as .
2. When user starts the “Track Log” function, the “ ” icon will
appear on the bottom-left corner of the screen.
3. The “ xxxxFree “signifies how many log data can be recorded.
::::Time Mode
Time Mode
Time ModeTime Mode
Menu
Menu: Go to Position Information mode
MenuMenu
Enter
Enter: Go to select the Time Zone Adjustment
EnterEnter
Note:
1. This is UTC* time receiving from GPS, which can’t be adjusted but time
zone selecting is allowed. .
*UTC means the Greenwich Mean Time (Coordinated Universal
Time).
2. The RTC inside the GPS will continue to keep time information while
the battery power is available. Time information will be lost with the
absence of battery power.
3. GPS fresh from the factory, before GPS acquisition, or with recent
firmware update, or no battery power will show “ ” only.
4. After the first GPS acquisition, the RTC will start to retain time
information and the screen wil start to show time like .
5. With time information retained the RTC will show time with a quote in
the front when no GPS is acquired like . Time shown will
return to quoteless like after GPS acquisition.
15
HOLUX GPS Logger M-241c User’s Manual
::::TTTTime
ime ZZZZone
ime ime
Menu
Menu: Adjust the UTC time to meet user’s local time (circular:
MenuMenu
+8,+9,+10,+11,+12,+13,-12,-11,-10,-9,-8,-7,-6,-5,-4,-3,-2,-1,0,+1,+2,+3,
+4,+5,+6,+7,Esc*)
Enter
Enter: Setting and back to Time mode
EnterEnter
****Esc:
Esc: means to cancel the change and restore to the previous
Esc:Esc:
setting.
one Adjustment
oneone
Adjustment
Adjustment Adjustment
16
HOLUX GPS Logger M-241c User’s Manual
::::Position
Position Information
PositionPosition
Menu
Menu: Go to Speed & Altitude Information mode
MenuMenu
Enter
Enter: Record a current track log data once
EnterEnter
Note: When Recording a current track log data once, the ” ” icon will
show for one second on the bottom-left corner of the screen.
Note: Because the satellite signal may be shifted easily due to the
interference when the moving speed is less than 10 km/hr or under the
environment with tall buildings that the satellite signal is not good, it is
normal that the user may see the shift of the satellite coordinate while
being in the static state.
Information Mode
Information Information
Mode
Mode Mode
::::Speed & Altitude
Speed & Altitude Information
Speed & AltitudeSpeed & Altitude
Menu
Menu: Go to Measure Distance mode
MenuMenu
Enter
Enter: No Function
EnterEnter
Note:
1. Current Speed (Unit: km/h or mph) and altitude (Unit: m or ft) will show
on the LCD.
2. You can select the unit in setting mode, refer to km/mile menu.
Because the satellite signal may be shifted easily due to the interference
when the moving speed is less than 10 km/hr or under the environment
with tall buildings that the satellite signal is not good, it is normal that the
user may see the shift of the satellite coordinate while being in the static
state.
Information Mode
Information Information
Mode
Mode Mode
17
HOLUX GPS Logger M-241c User’s Manual
::::Measure Distance Mode
Measure Distance Mode
Measure Distance ModeMeasure Distance Mode
Menu
Menu: Go to Setting mode
MenuMenu
Enter
Enter: Start / Stop to measure distance
EnterEnter
Note:
1. When user enables the “Measure Distance” function, the “ ” icon
will shows on the top-left corner of the screen
2. Because the satellite signal may be shifted easily due to the
interference when the moving speed is less than 10 km/hr or under the
environment with tall buildings that the satellite signal is not good, the
user may see the shift of the satellite coordinate while being in the static
state. Thus, while the distance is being measured, it is normal that there
might be accumulated error and the displayed total measured distance
will be different from the actual distance.
3. You can select the unit in setting mode, refer to km/mile menu.
::::Setting Mode
Setting Mode
Setting ModeSetting Mode
Menu
Menu: Go to Track Log Mode page
MenuMenu
Enter
Enter: Go to “Distance By” menu of Setting mode
EnterEnter
Menu
Menu: Go to Distance By menu of Setting mode
MenuMenu
Enter
Enter: Go to select “Point” or “Route”
EnterEnter
page
page page
Note:
1. “Distance By” signifies that Measure Distance is by “The beeline
between Begin Point and End Point” or by “Route (Path) of all
points”.
18
HOLUX GPS Logger M-241c User’s Manual
Menu
Menu: Select “Point” or “Route”
MenuMenu
Enter
Enter: Setting and back to Setting mode
EnterEnter
NOTE:
1. When the user select the “Point” logging method, the logged
distance is the straight line distance between the starting point
and the end point.
2. If the “Route” logging method is selected , the logged distance
will be the accumulated distance of each segment between the
log points. However, because the distance between any two
log points may have error, the accumulated distance value may
have increased error with the increase of the number of the log
points.
Menu
Menu: Go to km/mile menu of Setting mode
MenuMenu
Enter
Enter: Go to select “km” or “mile”
EnterEnter
Note: “km/mile” signifies that the Units of Measure Distance and show
speed are “km” or “mile”.
Menu
Menu: Select “km” or “mile”
MenuMenu
Enter
Enter: Setting and back to Setting mode
EnterEnter
19
HOLUX GPS Logger M-241c User’s Manual
Menu
Menu: Go to Log record menu of Setting mode
MenuMenu
Enter
Enter: Select “Full Stop” or “Overwrite”
EnterEnter
Menu
Menu: Select “Full Stop” or “Overwrite”
MenuMenu
Enter
Enter: Setting and back to Setting mode
EnterEnter
Note:
1. “ Full Stop” -> Recording log data -> flash full -> Stop recording.
2. “ Overwrite” -> Recording log data -> flash full -> Overwrite the first log.
Menu
Menu: Go to Log by Time menu of Setting mode
MenuMenu
Enter
Enter: Set Log Mode to “By Time” and select number of Sec.
EnterEnter
Menu
Menu: select the logging frequency .(circular:
MenuMenu
1,5,10,15,30,60,120,Esc*)
Enter
Enter: Setting and back to Setting mode
EnterEnter
****Esc
Esc means to cancel the change and restore to the previous setting.
EscEsc
Menu
Menu: Go to Log by Distance menu of Setting mode
MenuMenu
Enter
Enter: Set Log Mode to “By Distance” and select the number of
EnterEnter
meters.
Menu
Menu: select the logging interval circular:
MenuMenu
50,100,150,300,500,1000 meters , Esc*)
Enter
Enter: Setting and back to Setting mode
EnterEnter
****Esc
Esc means to cancel the change and restore to the previous setting.
EscEsc
20
HOLUX GPS Logger M-241c User’s Manual
Menu
Menu: Go to Language menu of Setting mode
MenuMenu
Enter
Enter: Select Language
EnterEnter
Menu
Menu: Select Language. (circular: English, Deutsch, French,
MenuMenu
繁體中文,简体中文)
Enter
Enter: Setting and back to Setting mode.
EnterEnter
Menu
Menu: Go to Erase menu of Setting mode
MenuMenu
Enter
Enter: Go to “YES / NO” status
EnterEnter
Menu
Menu: Not erased and back to Setting Mode
MenuMenu
Enter
Enter: Erase all of track log data and back to Setting Mode
EnterEnter
Menu
Menu: Go to Default menu of Setting mode
MenuMenu
Enter
Enter: Go to “YES / NO” status
EnterEnter
Menu
Menu: No change and back to Setting Mode
MenuMenu
Enter
Enter: Restores device back to factory default settings and back
EnterEnter
to Setting Mode
21
HOLUX GPS Logger M-241c User’s Manual
MENU::go to auto log setup ENTER::select yes or no
MENU::Choose to activate auto log mode. ENTER::confirm selection and return to setup. Note::once activated the M-241c will start in the auto log mode
and record logs automatically after power on.
MENU::Go to Back Light of Setting mode
ENTER::Go to “YES / NO” status
MENU::Select the time of back light.
ENTER::Setting and back to Setting mode.
Menu
Menu: Go to Back menu of Setting mode
MenuMenu
Enter
Enter: Back to Setting Mode
EnterEnter
22
HOLUX GPS Logger M-241c User’s Manual
COM Port
COM PortCOM Port
COM Port
8. Connecting the device to the PC
M-241c provides data connection with PC through USB cable.
Install USB driv
Install USB driver
Install USB drivInstall USB driv
er
erer
1. Power On the device.
2. Connect the device to a computer
with the USB cable provided in the
package.
3. Install the USB driver
“CP210x_VCP_Win2K_XP.exe
CP210x_VCP_Win2K_XP.exe
CP210x_VCP_Win2K_XP.exeCP210x_VCP_Win2K_XP.exe
from the CD provided in the
package.
4. Click <Start> menu, select →
<Setting>, then enter→ <Controller> and select <System> Select <Device Manager> Find the < Connector (COM & LPT)> and
check the “
CP210xUSB to UART
””””
Bridge Controller
” message.
Please note that the virtual COM port
number might be different on every
computer. Before using navigation
software, please confirm the COM Port
numbers created by your computer and
provided to your navigation software.
23
HOLUX GPS Logger M-241c User’s Manual
9. Transfer Log Data to PC
1. User can use Holux application software ” HoluxUtility.exe
transfer the log data to the PC after connecting the device to the PC,
and easily export the log data to “Google Earth
2. For information on “Google Earth”. Please visit Google Earth website http://earth.google.com.
3. The transfer time takes about 4 min if the full memory usage.
Google Earth” or “locr GPS Photo
Google EarthGoogle Earth
HoluxUtility.exe” to
HoluxUtility.exeHoluxUtility.exe
locr GPS Photo”.
locr GPS Photolocr GPS Photo
Holux
Holux Logger
HoluxHolux
Logger Utility
Logger Logger
Holux Logger Utility allows the user to adjust Track Log Setting and
Track Log Format Conversion and Track Log Photo Link and download
and update firmware.
Utility main screen includes five sub pages:
Page 1: Device Setting
Page 2: Track Log Setting
Utility
UtilityUtility
Page 3: Track Log Format
Page 4: Track Log Photo
Page 5: Download and Update Firmware
24
HOLUX GPS Logger M-241c User’s Manual
1111
2222
3333
5555
6666
4444
Device Setting
Device Setting
Device SettingDevice Setting
1. Page:Device setting page.
2. COM Port:Select COM Port.
3. Baud rate:Select Baud rate.(Default: 38400)
4. Auto Detect:Auto Detect COM Port.
5. Connect:Connect the Holux Logger Utility to device.
6. Device Information:If the device connected to Holux Logger Utility, the
de
device information
vice information will show a descriptive message and the Connect
dede
vice information vice information
button will change to Disconnect
button will change to Disconnect. The device LCD will show an “
button will change to Disconnectbutton will change to Disconnect
icon.
Connected
Connect
Connect Connect
25
HOLUX GPS Logger M-241c User’s Manual
Connected
1
2
1. User Name:User can input user name here.
a. Maximum input for user name:16 characters
b. Input user name must be ASCII characters.
c. Cannot input “*”or spaces.
2. Write Name:Send the user name setting to the device and save it.
3. Apply All:Set “Track Log Setting” and save these settings in the device.
3
4
4. Default All:Update all settings to default. (if the user wants to save
“Track Log Setting” in the device, please click the “Apply All” button)
26
HOLUX GPS Logger M-241c User’s Manual
1111
2222
3333
4444
5555
6666
7777
Track Log Setting
Track Log Setting
Track Log SettingTrack Log Setting
1. Page:Track Log Setting Page.
2. Record Style:Select Record Style.
3. Log Argument:Select Log Argument.
4. Upload:Go to upload Track Log Data from Device to PC.
5. Clear:Clear All Data of Device.
6. Apply All:Set “Track Log Setting” and save these settings in device.
7. Default All:Update all setting to default. (if the user wants to save
“Track Log Setting” in the device, please click the “Apply All” button)
27
HOLUX GPS Logger M-241c User’s Manual
Upload
1111
3333
4444
2222
5555
1. Directory:Select the directory for saving.
2. Directory:If the user has Image files for Track Log Data, please go to
select the image directory after the “Combine JPG file” item has been
selected.
3. Write Total Track Log:If the “Write Total Track Log” is selected, Utility
will save total log data to another file (*.trl) and “*.kml” file.
4. OK:Upload log data to “ *.trl ” files on the selected directory. If the user
executes step 2, it will combine the image files and log data to a “ *.kml ”
files else it will create “*.kml” files without image combined.
5. Cancel:Do nothing, and exit.
28
HOLUX GPS Logger M-241c User’s Manual
Track Log File Status
During the uploading of the track log, the track log files (*.trl) and (*.kml) will be
generated. If the user has logged multiple tracks (Note: when the user press
the “Log Start” on the Track Logger and then press the “Log Stop”, a new track
log will be generated.) Each segment of the main track log file will be named
under the convention: User
Name_Start_YYYYMMDD-HHMMSS_Finish_YYYYMMDD-HHMMSS, which
means that the segment of the track log is logged from the date-time right after
the “Start” to the date-time date-time right after the “Finish”.
(YYYYMMDD-HHMMSS: year/month/day-hour/minute/second). The filename
extension is (*.trl) or (*.kml). If the user select “Save all the tracks into the same
file” in the Track Upload Options, there will be an additional track log file: User
29
HOLUX GPS Logger M-241c User’s Manual
Name_Total_Start_YYYYMMDD-HHMMSS_Finish_YYYYMMDD-HHMMSS,
which covers all the segments of the track log files.
30
HOLUX GPS Logger M-241c User’s Manual
Track Log Format
Track Log Format
Track Log FormatTrack Log Format
1. Page:Track Log Format Page.
2. Directory:Select the track log source file (*.trl) that you are uploading.
3. Time Zone (UTC+-) :Select the time zone as device time zone (UTC).
4. Output Format:Select the output file format that you want to convert.
5. Convert:Convert the source file (*.trl) to the selected file format.
6. Apply All:Set “Track Log Setting” and save these settings in the device.
7. Default All:Update all settings to default. (if the user wants to save
“Track Log Setting” in the device, please click the “Apply All” button)
31
1111
2222
3333
HOLUX GPS Logger M-241c User’s Manual
Track Log Photo
Track Log Photo
Track Log PhotoTrack Log Photo
5555
6666
4444
7777
8888
9999
32
HOLUX GPS Logger M-241c User’s Manual
1. Page:Track Log Photo Page.
2. Directory :Select the track log source file (*.trl) that you are uploading.
3. Directory :Select the image directory that you want to combine.
4. Photo Combine Setting:Calibrate Photo Time.
5. Convert:Combine the image files and log data to a “ *.kml ” file.
6. Photo Processing Statistics: Show photo processing statistics
information including numbers of parsing photo and combining photo successfully and failed. (Reference Top Figure)
7. Photo Processing Detailed Status: Show each photo processing
detailed status including error message.(Note: The error message: “No
mapping any track log point.” means the photo is in the range of photo
discarded threshold. See next section: Photo Combine Setting: Photo
Discarded Threshold) (Reference Front Figure )
8. Apply All:Set “Track Log Setting” and save these settings in the device.
9. Default All:Update all settings to default. (if the user wants to sa ve
33
HOLUX GPS Logger M-241c User’s Manual
“Track Log Setting” in the device, please click the “Apply All” button
34
HOLUX GPS Logger M-241c User’s Manual
4444
1111
2222
5555
6666
3333
Photo Combine Setting
1. Time Zone For Photo (UTC+-) :Select the time zone as device time
zone (UTC).
2. Calibrate Time:Calibrate camera photo time to match the device
showing time.
3. Photo Discarded Threshold: Describe the threshold that photo is
discarded. (Note: In second threshold, the 2 minutes is maximum log
argument time in Track Log Setting page.)
4. Write Track Log Record in Photo: Write combined track log record in
photo EXIF. Track log record information includes latitude, longitude,
altitude, and UTC time and date stamp. (Note: Currently support write
track log record in only Canon and Sony photo JPEG EXIF format.)
5. OK:Set the selected item.
35
HOLUX GPS Logger M-241c User’s Manual
6. Cancel:Do nothing, and exit.
36
HOLUX GPS Logger M-241c User’s Manual
1111
2222
7777
8888
3333
4444
5555
6666
Download and Update Firmware
37
HOLUX GPS Logger M-241c User’s Manual
Note: Utility only supports UBS connection. connection is currently not
supported. If the download process is interrupted please download the file
again to resume the device’s BT Mac Address
1. Page: Download and Update Firmware
2. Warning Declaration: Tell the user to notice some important operations
before downloading. The warning declaration is: [Warning] Download
and update firmware is the very dangerous operation, it may destroy the
device system if careless. Please make sure the firmware file format is
correct before downloading ,and please don't disconnect cable from
device or PC site.
3. Update Firmware File(*.bin): Select the update firmware file (*.bin).
4. Download and Update Status: Display the download and update
procedure status.
5. Download Progress Bar: Display the download progress.
6. Download and Update: Execute download and update operation.
7. Apply All:Set “Track Log Setting” and save these settings in the device.
38
HOLUX GPS Logger M-241c User’s Manual
8. Default All:Update all settings to default. (if the user wants to save
“Track Log Setting” in the device, please click the “Apply All” button)
39
HOLUX GPS Logger M-241c User’s Manual
10. Installation of Mini GPS Viewer program
We provide the program “Mini GPS viewer.exe” for end users to watch the
satellite signal receiving status on laptop.
For Windows 2000/XP OS, you can execute “Mini GPS viewer_PC”
directly.
40
HOLUX GPS Logger M-241c User’s Manual
11. Execute the Mini GPS Viewer program
1.
The following window is shown after executing Mini GPS Viewer,
(see Fig. 1).
(Fig. 1)
2.
Setup the Baud rate: 38400, then select your COM Port
respectively, and tap the “Open” button.
GPS information status will display. (see Fig. 2).
(Fig. 2)
41
HOLUX GPS Logger M-241c User’s Manual
3.
In the “status” pane
l you can see “Hot Start” “Warm Start” “Cold
Start”, which allow you to re-acquisition the Ephemeris and
Almanac. Basically, the satellites are always moving in the sky, if
Ephemeris and Almanac data in the GPS Logger can’t meet real
satellites status or if the GPS Logger has been powered off for over
0.5 hours but you are no longer in the previous position, then it will
take more time for the GPS Logger to obtain a GPS position fix. We
suggest that you click “Cold Start” or “Warm start” to re-acquisition.
Or you can remove the battery for 120 seconds and reinsert it; this
operation is the same as “Cold Start”.
42
HOLUX GPS Logger M-241c User’s Manual
12. Power
1.
M-241c is powered by the AA size battery, the alkaline battery is
recommended for the environmental protection and a longer
working time. The following table shows the reference working
time for different battery types. When M-241c is operated under an
environment at a low temperate, the working time of the battery
will be shorter than that in the room temperature.
Note: DO NOT use rechargeable batteries to avoid malfunction.
When battery low, the icon” ”will flash from the battery low warming to
shut down that depends on different types as about 60~ 90minutes.
2.
The reference working time for different battery types.
Condition
Type
Alkaline Battery
Ordinary Battery
Rechargeable Battery(1700mA)
Room
Temperature
12 hours 2 hours 10 hours
4 hours NA NA
10 hours NA NA
Low
Temperature
High
Temperature
3.
M-241c can be powered by the Car Charger or the USB Cable to
continue the operation of the M-241c without any battery. However,
it does not equip with the charging function. It can not perform the
charging operation even if the rechargeable battery is used.
13. Warranty
The M-241c is guaranteed to be free from defects in material and
functions for a period of one year from the date of purchase. Any failure of this
product within this period, under normal conditions, will be repaired at no
charge to the customers.
43
HOLUX GPS Logger M-241c User’s Manual
port is conflicted/occupied by other
process, the initial process of flash
14. Troubleshooting
Problems Possible Reasons Methods
Weak or no GPS signal at the
No GPS
output but
GPS timer is
counting
execute fail function unstable
Cannot open
the COM port
No display Battery low Please check battery.
place of M-241c
The ephemeris and almanac data
in the GPS memory are no longer
valid after an extended period of
nonuse.
connection interrupted or COM
programs.
Test under an open sky at a fixed location
and run the Mini GPS Viewer “Cold start”
function.
Remove the Battery for 120 seconds and
re-insert, then power on to test again.
This operation is the same as “Cold Start”.
Power On/Off M-241c.
Re-Start PC and refer to section 10
“ device connection installation” to
re-connect.
Check the connection again,
Check and close other programs that
might conflict with.
Logger
function on,
but no POI
recorded
Velocity and
position
shifting when
static
Logger
function can’t
work
No acquisition Please move to open sky to reacquisition.
Log mode is by distance, so it
Change log mode to by time
wont record if no movement.
Ensure you interval setting meet your
log mode is by long interval
situation.
Because the satellite signal may
be shifted easily due to the
It’s a GPS character, just move to open
interference when the moving
sky area to get better GPS signal.
speed is less than 10 km/hr or
under the environment with tall
buildings that the satellite signal is
not good,
When device is suddenly shut
down in flash memory erase
Power on again to erase.
will be failed.
44
HOLUX GPS Logger M-241c User’s Manual
Federal Communications Commission (FCC)
Statement
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one of the
following measures:
- Reorient or relocate the receiving antenna.
- Increase the separation between the equipment and Logger.
- Connect the equipment into an outlet on a circuit different from that
to which the Logger is connected.
- Consult the dealer or an experienced radio/TV technician for help.
CAUTION: Any changes or modifications not expressly approved by the party
responsible for compliance could void the user's authority to operate this
equipment.
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including
interference that may cause undesired operation.
This equipment must be installed and operated in accordance with provided
instructions and the antenna(s) used for this transmitter must be installed to
provide a separation distance of at least 20 cm from all persons and must not
be co-located or operating in conjunction with any other antenna or transmitter.
End-users and installers must be provided with antenna installation
instructions and transmitter operating conditions for satisfying RF exposure
compliance.
This equipment is in compliance with the essential requirements and other
relevant provisions of Directive 1999/5/EC.
45
HOLUX GPS Logger M-241c User’s Manual
46
Loading...