Item #______________________________________
Quantity____________________________________
C.S.I. Section 11400
|
|
|
|
|
|
|
|
FT1000 ENERGY RECOVERY |
|
|
701 S Ridge Avenue, Troy, OH 45374 |
|
WITH BLOWER DRYER |
|
|
|
FLIGHT-TYPE DISHWASHER |
|
|
|
1-888-4HOBART • www.hobartcorp.com |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
STANDARD FEATURES
■Pumped rinse system (pressure gauge not required)
■Water usage 58 gph
■Digital controls with machine diagnostics
■Low temperature alert
■Single point vent location
■31" access on prewash, power wash and power rinse chambers; 20" access on dual rinse and ASR chambers
■Start and stop switches at both ends
■Doors open indicator
■Drains open indicator
■Door interlocks
■31⁄2 H.P. prewash, 5 H.P. power wash and power rinse pump motors, all TEFC
■Capless Auto Clean wash arms
■Easy to remove stainless steel scrap pans and baskets
MODEL
FT1000 Energy Recovery with Blower Dryer Flight-Type Dishwasher
OPTIONS AT EXTRA COST
Electric Tank Heat
Steam Tank Heat
Booster Heater
Electric
Steam
Blower Dryer
Electric
Steam
6" higher than standard chamber
Multiple conveyor choices
Circuit breakers
Security package
Other options available, consult factory
■30" wide conveyor belt
■Dual Rinse
■Automatic Soil Removal system (ASR)
■Auto Clean
■Auto Delime
■Energy Recovery
■Front and rear panels
■Variable speed conveyor
DIRECTION OF OPERATION
Right to Left
Left to Right
VOLTAGE
208/60/3
240/60/3
480/60/3
Other voltages available – consult factory
ACCESSORIES
Flanged feet
Water hammer arrestor/PRV (installed by others)
Drain water tempering kit (installed by others)
Vent connection kit
Specifications, Details and Dimensions on Inside and Back.
•LA Research Report M660004
•Complies with EPA Reduction of Lead in Drinking Water Act 2014
•Meets requirements of ASSE Standard No. 1004
DISHWASHER TYPE-FLIGHT DRYER BLOWER WITH RECOVERY ENERGY FT1000
F40392 – FT1000 Energy Recovery with Blower Dryer Flight-Type Dishwasher |
Page 1 of 12 |
FT1000 ENERGY RECOVERY WITH BLOWER DRYER FLIGHT-TYPE DISHWASHER
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
DESIGN: Fully automatic, flight-type dish machine consisting of a load section with Automatic Soil Removal system, power recirculating prewash, power wash, power rinse and dual rinse/final rinse section. Included with each machine will be flexible plastic strip curtains to control overspray.
CONSTRUCTION: Stainless steel tank and chambers with No. 3 polish on appearance surfaces. Frame, legs and feet to be constructed of stainless steel. Inspection doors to be chamber width.
PUMPS: Recirculating stainless steel pumps with stainless steel impellers. Pump housing has easy to remove coverplate for access to impeller. Wash pumps are self-draining.
MOTORS: Totally enclosed fan cooled (TEFC) design with overload protection. Pump motors to be 31⁄2 H.P. for prewash, 5 H.P. for power wash and power rinse, and conveyor motor to be 1⁄3 H.P. Available in electrical specifications of 208/60/3, 240/60/3 and 480/60/3.
CONTROLS: A stainless steel control center with electronic digital controls mounted at eye level. Power “On/Off” and “Start/Stop” switches integrated into keypad. Digital display indicates door(s) open, low temperature alert, tanks/final rinse temperatures, Auto Clean and Auto Delime instructions and notifications, and other pertinent operating data. Additional “Start/Stop” switches are located at each end of machine. Conveyor speed button included on the control center to provide for the adjustable speed conveyor.
FLIGHT-TYPE CONVEYOR: Stainless steel side links, tie rods and conveyor tracks. Injection molded, resilient Duraflex flight links.
VENT: Indirect vent connection with integral powered fan.
AUTOMATIC SOIL REMOVAL SYSTEM (ASR):
Two foot section with specialized soil removal wash arms which removes food soil from the ware before it reaches the prewash tank. System will pump food soil from the ASR tank into an external collector located under the load section, minimizing the need to pre-scrap dishes and reducing detergent consumption. Operator can easily remove and clean external collector without interruption of machine operation.
RECIRCULATING PREWASH SECTION: Prewash compartment is fitted with upper and lower wash arms. Large removable one piece perforated stainless steel screen sloped downward to deep stainless steel scrap basket.
TANK HEAT: Power wash, power rinse and dual rinse tank water temperatures are thermostatically controlled. Low water protection is provided. Specify either electric or steam heat.
FINAL RINSE: Easily removed final rinse arms.
ENERGY RECOVERY: Energy Recovery system operates with a cold water line, capturing energy from exhaust air, and using it to elevate the temperature
of the water entering the booster heater. The result is savings – both in hot water and in energy.
CONVEYOR DRIVE UNIT: Powered by a 1⁄3 H.P. motor. Trip mechanism provided on unload section. Jam protection is provided by load sensing switch at drive platform. Conveyor speed adjustment of 4.0 feet per minute to 8.5 feet per minute is provided on the digital display keypad.
DRAINS: Manual, hand-operated, located at each tank. One manual and automatic master drain to be used for Auto Clean and Auto Delime.
BLOWER DRYER: Includes (2) 2 H.P. fan motors with sealed ball bearings and overload protection. Available in electric or steam heat.
Page 2 of 12 |
F40392 – FT1000 Energy Recovery with Blower Dryer Flight-Type Dishwasher |
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
FT1000 ENERGY RECOVERY WITH BLOWER DRYER FLIGHT-TYPE DISHWASHER
No other control system allows easier monitoring.
The digital controls are placed in a convenient
panel that lets operators verify proper operation and temperatures at a glance. Digital display indicates
the unit is on, and confirms that the doors are closed. Automatic door interlocks prevent the pump and conveyor from operating if the doors are open. Easy-to-read digital display indicates accurate temperatures of the 150°F wash, 160°F power rinse, 160°F dual rinse and 180°F final rinse — critical for proper HACCP system record-keeping.
Stainless steel pump is built for long life.
The stainless steel pump housing and impeller offer greater durability and long life. The pump motor is totally enclosed and fan cooled (TEFC) to protect it from water spray during dishroom clean-up.
Scrap baskets capture food particles and are easy to clean.
The sloped screens that carry scraps to the scrap baskets are steeper, so less
soil gets into the tanks. The basket
opening is larger for easy cleaning and basket handles have been designed for easy lift-out access. The load section also features a removable scrap basket which contains soil that is pumped from the ASR section. All scrap baskets and strainers are stainless steel for strength and durability.
The FT1000 Series saves water and energy.
The unit has the lowest water and energy consumption in the industry, yet
provides effective cleaning and sanitizing that meets NSF International requirements.
This is achieved through a carefully balanced ratio of water flow to pressure.
Insulated doors and thermal layered curtains also reduce heat loss. The unit’s 58 gallons per hour rinse flow rate saves both water and the energy to heat it.
Variable speed conveyor offers increased throughput.
The conveyor on the FT1000 Series is wider so it can handle more ware.
Result: more volume and versatility, quicker work. Its speed is easily adjustable for the type of ware, soiled condition, or workforce requirements. It runs at 4.0 - 8.5 feet per minute.
Energy Recovery system reclaims heat for energy.
The Energy Recovery system’s heat exchanger captures escaping heat and steam from the exhaust air in the dish machine, and uses it to preheat the incoming cold water supply to 120°F before it enters the booster heater. In addition to energy
savings, the Energy Recovery system provides a viable use for this otherwise exhausted heat.
Self-draining wash pumps help keep water clean.
Pumps are self-draining when the machine is shut down, so there is no residual water left in the pumps.
Installation is quick and easy with modular design, minimal wiring connections, and single point vent.
Modular design means the FT1000 installs quickly and reliably. The control panel is already in place, premounted to the dual rinse/final rinse section.
Wiring connections are minimal, and there is only a single vent, saving time and expense. The control box uses a “single
plane” circuitry design for easy accessibility during installation and service. The FT1000 is ready to run quickly.
F40392 – FT1000 Energy Recovery with Blower Dryer Flight-Type Dishwasher |
Page 3 of 12 |
FT1000 ENERGY RECOVERY WITH BLOWER DRYER, ELECTRIC L-R
701 S Ridge Avenue, Troy, OH 45374
1-888-4HOBART • www.hobartcorp.com
18 3/4"
37 1/2" V1
P3
E1
E2 E6
E3 E7
E4 E8
E5 E9
P3
3 15/16"
25 9/16" 3"
LOAD
END
62 3/4"
36 1/2"
6"
NOTE: REFER TO LATEST
EDITION OF NATIONAL
ELECTRICAL CODE AND
LOCAL BUILDING CODES
FOR PROPER CLEARANCE
NOTE: STRAINER PANS
REQUIRE 35" TO
BE REMOVED. EXTRA
CLEARANCE SHOULD BE
PROVIDED.
35"
FLOOR LINE
P2 |
60" |
P1 |
52" |
P3 |
44 9/16" |
P2
P1
23 3/4"
55 11/16"
63 3/8"
V1 9 15/16"
160 1/16"
E5 E4 E3 E2 E1 11 13/16"
E9 E8 E7 E6
OVER FRAME "A" |
7 3/16" |
LOAD "B" |
|
8' 7/16" |
35 7/16" |
35 7/16" |
35 7/16" |
|
|
5 3/4" |
ASR |
PRE- |
POWER |
POWER |
|
WASH |
WASH |
RINSE |
DIRECTION OF OPERATION
FLOOR LINE
40 3/8"
22" HIGH X 29-13/16"
WIDE OPENING WILL
HANDLE 18" X 26" BUN PANS
NOTE: CLEARANCE FROM WALL 44 13/16" 24" RECOMMENDED, 6" MINIMUM
SEE NOTE (a) WITH DETERGENT DISPENSER ON THE TOP
UNLOAD "C"
25 9/16"
EXHAUST HOOD SUPPLIED BY OTHERS
43 5/16"
23 3/4"
6" AIR
GAP
V1
|
|
BLOWER/ |
|
|
|
|
|
DRYER |
|
|
|
AUX |
FNL |
UNLOAD |
89 3/8" |
|
|
END |
(e) |
||||
SEE NOTE |
|||||
RNS |
RNS |
|
|||
|
81 7/8" |
|
|||
|
|
|
|
||
|
|
|
36 1/4" |
|
MODEL NO. |
"A" |
"B" |
"C" |
|
|
|
|
FT1023 (7.5'-8'-7.5') |
23' 3-1/2" |
7' 8-1/2" |
7' 6-1/2" |
FT1024 (8.5'-8'-7.5') |
24' 3-1/4" |
8' 8-1/4" |
7' 6-1/2" |
FT1025 (9.5'-8'-7.5') |
25' 3-3/32" |
9' 8-3/32" |
7' 6-1/2" |
FT1025 (7.5'-8'-9') |
24' 11-1/4" |
7' 8-1/2" |
9' 2-1/4" |
FT1026 (8.5'-8'-9') |
25' 11" |
8' 8-1/4" |
9' 2-1/4" |
FT1027 (9.5'-8'-9') |
26' 10-27/32" |
9' 8-3/32" |
9' 2-1/4" |
FT1027 (7.5'-8'-11') |
26' 10-7/8" |
7' 8-1/2" |
11' 1-7/8" |
FT1028 (8.5'-8'-11') |
27' 10-5/8" |
8' 8-1/4" |
11' 1-7/8" |
FT1029 (9.5'-8'-11') |
28' 10-15/32" |
9' 8-3/32" |
11' 1-7/8" |
FT1030 (7.5'-8'-15') |
30' 6-3/16" |
7' 8-1/2" |
14' 9-3/16" |
FT1031 (8.5'-8'-15') |
31' 5-15/16" |
8' 8-1/4" |
14' 9-3/16" |
FT1032 (9.5'-8'-15') |
32' 5-25/32" |
9' 8-3/32" |
14' 9-3/16" |
FT1032 (7.5'-8'-17') |
32' 5-3/4" |
7' 8-1/2" |
16' 8-3/4" |
FT1033 (8.5'-8'-17') |
33' 5-1/2" |
8' 8-1/4" |
16' 8-3/4" |
FT1034 (9.5'-8'-17') |
34' 5-11/32" |
9' 8-3/32" |
16' 8-3/4" |
NOTE: OVERALL LENGTH OF MACHINE IS DIMENSION "A" + 11 13/16"
Page 4 of 12 |
F40392 – FT1000 Energy Recovery with Blower Dryer Flight-Type Dishwasher |