Hobart WTSBSS-XL, WTSBSS-FT General Manual

Item # _____________________________________

Quantity ___________________________________

C.S.I. Section 11400

WATER TREATMENT SYSTEMS –

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartservice.com

STANDARD FEATURES

❑ Model WTSBSS-XL. Warewash water treatment

system with a capacity of 20,000* gallons and a water
ow of 1-3gpm. Applications include undercounter
warewash equipment. Replacement cartridge is model
SS-XL.

❑ Model WTSBSS-EXT. Warewash water treatment

system with a capacity of 35,000* gallons and a water
ow of 1-7gpm. Applications include C-Line or AM
warewash equipment. Replacement cartridge is model
SS-EXT.

❑ Model WTSBSS-FT. Warewash water treatment sys-

tem with a capacity of 55,000* gallons and a water
ow of 1-7gpm. Applications include F-Type ware­wash equipment. Replacement cartridge is model
SS-FT.

■ Protect booster heaters and dish machines with the

HydroBlend™ compound. HydroBlend™ will soften
existing scale deposits, provide scale prevention, and
provide corrosion control.

■ Clear housing allowing for visual indication of

cartridge replacement

■ Maximum operating temperature of 160

■ Exterior dimensions: (W x H x D): 5" x 12" x 5"

■ Operating Pressure Minimum/Maximum: 20psi / 150psi

■ Connection size: ¾" NPT

■ Bracket and ttings needed for installation included

with system

0

F

WAREWASH APPLICATIONS

MODELS

❑ Model WTSBSS-XL

❑ Model WTSBSS-EXT

❑ Model WTSBSS-FT

❑ For other variations, consult your local

Hobart Office.

Specications, Details and Dimensions on Back.

The SS-10 and SS-XL are tested and certied by NSF International

against NSF/ANSI Standard 42 for material requirements only.

Component

WATER TREATMENT SYSTEMS – WAREWASH APPLICATIONS

FEATURES

Hobart models WTSBSS-XL and WTSBSS-EXT ware­wash water treatment systems are designed to protect
booster heaters and dish machines. They are ideal for
reducing existing scale deposits, scale prevention, cor
rosion control, and are unaffected by high temperatures.
The clear, high temperature housing allows for visual
monitoring of replacement cartridges. Over time, the
product in the ScaleStick™ between the feed holes and
bottom will slowly dissolve and the level will drop. Re­place the ScaleStick
bottom. The small, compact design of both models will t
into any small space being only, (W x H x D) 5" x 13
x 5". Each model comes standard with the bracket and
ttings needed for installation included with the systems.

* Note: Capacities may vary depending on certain factors including flow

rate, frequency of use, and pressure. Do not base cartridges change out
on stated gallon capacity, but rather a visual inspection of the product
level through the clear housings.

™

when the product level reaches the

F-40119 – Water Treatment Systems – Warewash Applications Page 1 of 2

3/4

-

"

Model WTSBSS-EXT

Model WTSBSS-FT

Printed On Recycled Pap

WATER TREATMENT SYSTEMS –
WAREWASH APPLICATIONS

SPECIFICATIONS

1. Hobart models WTSBSS-XL and WTSBSS-EXT must
always be installed prior to the booster heater.

2. Always be certain that you securely mount the unit utilizing
the mounting bracket as the pipe may not support it.

3. The housing heading must be mounted horizontally so that
the sump is directly below the dispenser head.

4. Water Flow: 1-7 gpm

701 S Ridge Avenue, Troy, OH 45374

1-888-4HOBART • www.hobartservice.com

5. Designed Capacity: 20,000 - 55,000 gallons (var
ies with each system)

o

6. Max Temperature: 160

7. Max Pressure: 150 psi

8. Line Size (NPT): ¾"

9. Replacement Cartridge for WTSBSS-XL: SS-XL

10. Replacement Cartridge for WTSBSS-EXT: SS-EXT

11. Replacement Cartridge for WTSBSS-FT: SS-FT

F

-

Models WTSBSS-XL/WTSBSS-EXT/WTSBSS-FT

As continued product improvement is a policy of Hobart, specications are subject to change without notice.

Page 2 of 2 F-40119 – Water Treatment Systems – Warewash Applications

F-40119 (REV. 02/09) LITHO IN U.S.A. (H-01)