OWNER’S MANUAL
LE32A300/LE42A300/LE55A300
LB32R3A/LB42R3A/LB46R3A/LB55R3A
LE32H300/LE42H300/L32K3/L42K3
LED-LCD TELEVISION
Please READ this manual carefully before
operating your TV, and retain it for future
reference.
Contents
Contents
Warning 3
Important Safety Instructions 4
Introduction 6
Panel Control .......................................................6
Connection Options ............................................7
Remote Control 8
Battery loading ....................................................8
Precautions ..........................................................8
Remote Control Function 9
Function introduction .........................................9
External Equipment Connections 10
Antenna Connection .........................................10
Choose Your Connection ...................................11
VCR Connection ..................................................................11
External AV Source Setup ................................................ 11
Connecting a DVD player ................................................ 11
HDMI or DVI Setup ............................................................. 12
PC Setup ................................................................................ 12
Monitor Out Setup ............................................................. 13
Power source ...................................................... 13
Function Menu ...................................................18
Function Menu Set ............................................................ 18
Adjust Menu .......................................................19
Time Menu ..........................................................19
Lock Setup ..........................................................20
How to use the password function .............................. 20
Streaming Media Playing System ....................21
Start/Exit Streaming Media Playing system .............. 22
Operating Method of Streaming Media Menu ........ 22
Playing a Picture ................................................................. 22
Playing a Movie ................................................................... 23
Playing Music
Tex t
.......................................................................................... 23
Settings
......................................................................... 23
................................................................................... 23
Maintenance 24
Troubleshooting 24
Specification 25
Format 25
Basic Receiving and Playing
Operations 14
Switching ON/OFF the TV set
Switching ON/OFF the TV set ........................................ 14
Choose the Menu Language .......................................... 14
Choose the Input source .................................................14
Picture Menu .....................................................14
How to select the picture mode ................................... 14
How to customize your own picture status .............. 15
Sound Menu ....................................................... 15
How to select the sound mode ..................................... 15
How to customize your own sound status................ 16
Channel Menu ....................................................16
Programme Edit .................................................................. 16
Auto Tuning .......................................................................... 17
Exchange ............................................................................... 17
2 LED -LCD television Owner’s Manual
...........................14
Warning
!
Warning
WARNING
RISK ELECTRIC SHOCK
DO NOT OPEN
WARNING:
TO REDUCE THE RISK OF ELECTRIC SHOCK DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS
INSIDE. REFER TO QUALIFIED SERVICE PERSONNEL.
*
To avoid electric hazards, it is strongly suggested that the back cover not be opened, as there is no any
accessory inside the casing.
*
lf necessary, please contact authorized after-sales services.
*
A lighting ash mark in a triangle: A potentially hazardous situation, which, if not avoided, could result in
serious injury by high voltage.
*
An exclamation mark in a triangle: Major part or accessory of which technical specications must be followed if
it is to be replaced.
WARNING: To avoid fire or electric hazards, never place your television receiver in an area with heavy
CAUTION:
moisture. Attention should be paid to avoid accidental scratches or impacts onto the screen.
Please read this manual carefully before using your television and keep this manual in a
good place for future reference.
To achieve the best performance of your television, read this User’s Manual carefully and
properly store it for future reference.
Information of screen displays and figures in the User’s Manual may vary due to technical
innovations.
CAUTION:
Unauthorized disassembly of this product is prohibited.
LED -LCD television Owner’s Manual 3
Important Safety Instructions
Important Safety Instructions
4 LED -LCD television Owner’s Manual
Important Safety Instructions
LED -LCD television Owner’s Manual 5
Panel Control
Introduction
- This is a simplified representation of front panel.
- Here shown may be somewhat dierent from your TV.
Panel Control
TV/AV
1
MENU
2
VOL +/-
3
CH +/-
4
POWER Press to turn on and o the TV.
5
USB jack
6
Mini USB
7
6 LED -LCD television Owner’s Manual
Press this key to open/close signal source options
menu.
Menu display. Press to access the on-screen
menu display.
Press to adjust the volume. In the MENU screen,
these buttons serve as right/left buttons.
Press to scan through channels. To scan quickly
through channels, press and hold down either
+/- . In the MENU screen, these buttons serve as
up/down buttons.
Connect a USB ash drive to view videos,images
or listen music
Connect a USB ash drive to view videos,images
or listen music.
.
8
9
0
A
B
C
D
SPDIF
AV OUT
ANT IN
AV1 IN
HDMI IN
S-VIDEO
Headphone
Digital Audio Optical output.
Connect the audio L/R and video cables to your
other video equipment.
Connect cable pr antenna signal to the TV, either
directly or through your cable box.
Connect the video signal from a video device.
Connect a HDMI device to receive digital audio
and uncompressed digital video.
Connect the S-VIDEO cable from an external signal
source to this jack.
Headphone audio output terminal.
Connection Options
Back panel connections
Connection Options
ANT IN
Pb
Y
2
COMPONENT IN
1
AV2 IN
VIDEO
PC Video In
1
PC/DVI AudioInConnect the audio L/R cables from a computer
2
Component
3
Video In
AV2 In Connect the video signal from a video device.
4
DSMB Mo-Box jack .
5
ANT In
6
HDMI 3 IN
7
Connect a video cable from a computer to this
jack.
.
to this jack.
Connect a component video device to these
jacks.
Connect cable pr antenna signal to the TV, either
directly or through your cable box.
Connect a HDMI device to receive digital audio
and uncompressed digital video.
PC IN
L
PC/DVI AUDIOPC
AUDIO
Pr
R
L
AUDIO
Y / VIDEO
R
PC/DVI AUDIO
VIDEO
P
b
COMPONENT / AV2 IN
L
AUDIO
HDMI 3 INPC IN
PC
8
R
AV OUT
AV OUT
DSMB
HDMI 3 IN
Connect the audio L/R and video cables to your
other video equipment.
R
- AUDIO -
L
P
r
LED -LCD television Owner’s Manual 7
Remote Control
Remote Control
Battery loading
1. Slide open the cover of the battery compartment on
the back of the remote controller.
2. Load two 7# (AAA) alkaline batteries in the
compartment, (plus and minus poles to respective mark)
3. Replace the cover of the battery compartment.
Precautions
As strong light may interfere the signals, change your
position to operate the remote controller if the television
cannot be turned on or o as you expect.
Keep the remote controller away from heat source or
humid area to ensure eective performance of the
remote controller.
Make sure that two AAA alkaline batteries are loaded.
The batteries must be of the same type. The batteries
must be located properly. The batteries are not
rechargeable.
Make sure that there is no obstacle between the remote
controller and television set.
8 LED-LCD television Owner’s Manual
Remote Control Function
- The remote control cannot be operated unless the batteries are properly loaded.
- When using the remote control, aim it at the remote control sensor on the TV.
Function introduction
Remote Control Function
1
POWER
2
USB Press this key for quick switching of streaming media.
3
H. LOCK Refer to the Functional Description on
4
SOURCE Press this key to open/close signal source options menu.
5
DSMB Press this key for quick switching of MO-Car.
6
STILL
7
ARC
8
MUTE
9
0-9
0
Q. VIEW
A
VOL+ /-
B
CH+/-
C
Sound Mode
D
Picture Mode Press this key continuously to select the picture mode.
E
TV.MENU Press this key to display or exit the main menu.
F
D.MENU
THUMBSTICK (Up/
G
Down/Left/Right)
H
OK Press this key to conrm the selection.
I
EXIT
J
USB
K
TV.CALL
L
TIMESHIFT
M
VOD
N
AUDIO
O
PAGE+
P
GUIDE
Q
TV/FM No available.
R
INFO No available.
S
PAGE- No available.
T
CH.LIST No available.
U
FAV
V
STOCK
W
SLEEP
X
INTERACTION
Y
Fn
Z
DDS
[
BUSINESS
\
GAME
Press this key to start TV from standby mode, press it again to return to standby
mode.
Page 20.
Press this key to freeze the image. Press it again to return to normal screen. (Note:
Do not display a still picture for a long time to prevent the screen from burns.).
Press this key to select the screen display proportion.
Press this key to mute the sound, press it again to activate the sound. The sound
may be activated by turning the TV on again or increasing the volume.
These keys are used to select a channel.
Press this key to return to the previous TV program(only work in the TV mode).
Used to adjust the volume when the screen menu is closed.
Used to select a TV channel when the screen options menu is closed, specically,
to decrease the channel and press Pto increase the channel..
press P
Press this key continuously to select the sound mode.
Press this key to display the Special Function Menu (it functions when special
modules are inserted).
Allows you to navigate the on-screen menus and adjust the system settings to
your preference.
Clears all on-screen displays and returns to TV viewing from any menu.
Control the USB System.
Backward Forward Play/Pause BACK: Back REC: no available
ZOOM: Press to magnify/minify an image D.CALL: Press to display program
information.
Display on/o.
No available.
No available.
No available.
No available.
No available.
Press this key to display the favorite program list menu.
No available.
Displaying the sleep time.
No available.
No available.
No available.
No available.
No available.
LED -LCD television Owner’s Manual 9
External Equipment Connections
External Equipment Connections
Antenna Connection
- Antenna or Cable Service without a Cable Box Connections.
- For optimum picture quality, adjust antenna direction if needed.
Note:
* It is recommended that you'd better use 757 coaxial cable to remove
the disturbance caused by airwave.
* Don't bind antenna cable and electric wire together.
ANT.
10 LED -LCD television Owner’s Manual
To improve picture quality in a poor signal area,
purchase and install a signal amplifier.
If the antenna needs to be split for two Tv’s, install a
"2-WaySignal Splitter" in the connections.
If the antenna is not installed properly, contact your
dealer for assistance.
Note
All cables shown are not included with the TV. ❏
External Equipment Connections
Choose Your Connection
There are several ways to connect your television,
depending on the components you want to connect
and the quality of the signal you want to achieve. The
following are examples of someways to connect your TV.
Take LE32A300 as an example, Choose the connection
which is best for you.
VCR Connection
To avoid picture noise (interference), leave an adequate
distance between the VCR and TV.
Mini USB
SPDIF USB
VIDEO
R
AV OUT
L
AUDIO
- AUDIO-
LR
VIDEO
select the source, press the OK button to confirm.
External AV Source Setup
How to connect
Connect the audio and video cables from the •
external equipment’s output jacks to the TV input
jacks, as shown in the figure.
When connecting the TV to external equipment, •
match the jack colors (Video = yellow, Audio Left =
white, and Audio Right = red).
- AUDIO -
L
Y / VIDEO
PC/DVI AUDIOPC
PC IN
P
b
COMPONENT / AV2 IN
R
P
r
DSMB
HDMI 3 IN
- AUDIO-
LR
VIDEO
HDMI 2 IN ANT INHDMI 1 IN AV1 IN
HDMI 1 IN AV1 IN
HDMI 2 IN ANT IN
Connection Option 1
Set VCR output switch to channel 3 or 4 and then tune
the TV to the same channel number.
Connection Option 2
Connect the audio and video cables from the VCR’s A
output jacks to the TV input jacks, as shown in the
figure. When connecting the TV to VCR, match the
jack colors (Video = yellow, Audio Left = white, and
Audio Right = red).
Insert a video tape into the VCR and press
B PLAY on
the VCR. (Refer to the VCR owner’s manual.)
Select the input source with using the C SOURCE button
on the remote control, and then press
/
button to
How to use
Select the input source with using the A SOURCE
button on the remote control.
Press
B
Press
C OK button to confirm.
Operate the corresponding external equipment.
D
button to select the desired source.
/
Connecting a DVD player
How to connect
Connect the DVD video outputs (Y, PA
to the COMPONENT (Y, P
b/Cb
the TV and connect the DVD audio outputs to the
AUDIO jacks on the TV’ as shown in the figure.
LED -LCD television Owner’s Manual 11
b/Cb
, Pr/Cr) input jacks on
, Pr/Cr)
External Equipment Connections
program play.
Mini USB
/
SPDIF USB
VIDEO
R
AV OUT
L
AUDIO
- AUDIO -
L
Y / VIDEO
PC/DVI AUDIOPC
PC IN
P
r
P
b
COMPONENT / AV2 IN
R
DSMB
How to use
Turn on the DVD player, insert a DVD.A
Use the B
then press
mode
SOURCE
button on the remote control,
/
button to
to select COMPONENT
, press the OK button to confirm.
PressC Play button on external equipment for
program play.
Refer to the DVD player’s manual for operating
D
instructions.
HDMI or DVI Setup
To watch digitally broadcast programs, purchase and
connect a digital set-top box.
How to connect
Use the TV’s COMPONENT (Y, P •
jacks, VGA or HDMI port for video connections,
depending on your set-top box connections
available. Then, make the corresponding audio
connections.
How to use
Turn on the digital set-top box. A
(Refer to the owner’s manual for the digital set-top box.)
, Pr/Cr) INPUT
b/Cb
and
HDMI 3 IN
PC Setup
How to connect
Use the TV’s PC IN port for video connections.A
Then, make the corresponding audio connection. If B
using a sound card, adjust the PC sound as required.
How to use
Turn on the PC and the TV.A
Turn on the display by pressing the B POWER button
on the TV’s remote control.
Use SOURCE on the remote control to select PC source.C
Check the image on your TV. There may be noise D
associated with the resolution, vertical pattern,
contrast or brightness in PC mode. If noise is
present, change the PC mode to another resolution,
change the refresh rate to another rate or adjust the
brightness and contrast on the menu until the picture
is clear. If the refresh rate of the PC graphic card
can not be changed, change the PC graphic card or
consult the manufacturer of the PC graphic card.
- AUDIO-
LR
VIDEO
HDMI 1 IN AV1 IN
DSMB
HDMI 3 IN
HDMI 2 IN ANT IN
- AUDIO -
L
Y / VIDEO
PC/DVI AUDIOPC
PC IN
P
P
b
COMPONENT / AV2 IN
R
r
Use SOURCE on the remote contralto select PC or B
HDMI (Y, Pb/Cb, Pr/Cr) mode.
Press
C Play button on external equipment for
12 LED -LCD television Owner’s Manual
- AUDIO -
L
Y / VIDEO
PC/DVI AUDIOPC
P
b
COMPONENT / AV2 IN
R
P
r
DSMBPC IN
Note
Avoid keeping a fixed image on the TV’s screen for ❏
along period of Time. The fixed image may become
permanently imprinted on the screen.
The synchronization input form for Horizontal and ❏
Vertical frequencies is separate.
To obtain the best picture, do not play the USB, ❏
, HDMI or PC source at the same time.
YP
bPr
HDMI 3 IN
External Equipment Connections
Note
Component, PC, HDMI input sources cannot be ❏
used for Monitor out.
When connecting with external audio equipments, ❏
such as amplifiers or speakers, please turn the TV
speakers o.
Power source
TO USE AC POWER SOURCE
Use the AC polarized line cord provided for operation on
AC. Insert the AC cord plug into a standard polarized AC
outlet.
Monitor Out Setup
The TV has a special signal output capability which
allows you to hook up a second TV or monitor.
Connect the second TV or monitor to the TV’s AV OUT
by the tie line. See the Operating Manual of the second
TV or monitor for further details regarding that device’s
input settings.
Mini USBAV OUT
SPDIF USB
VIDEO
R
L
AUDIO
ANT IN
Note
Never connect the AC line cord plug to other than ❏
the specified voltage. Use the attached power cord
only.
If the polarized AC cord does not fit into a non ❏
polarized AC outlet, do not attempt to file or cut
the blade. It is the user’s responsibility to have an
electrician replace the obsolete outlet.
If you cause a static discharge when touching the ❏
unit and the unit fails to function, simply unplug
the unit from the AC outlet and plug it back in. The
unit should return to normal operation. Polarized
AC Cord Plug.
LED -LCD television Owner’s Manual 13
Basic Receiving and Playing Operations
Basic Receiving and
Playing Operations
Playing Operations
Switching ON/OFF the TV set
In the manual, the OSD (on screen display) may be
dierent from your TV’s because it is just an example to
help you with the TV operation.
Switching ON/OFF the TV set
First, connect power cord correctly and the power A
indicator will light.
Press
B POWER on the remote control again.
If you want to exchange to standing by status,
C
please press down POWER on the remote control
Disconnect the power supply or unplug the
D
television if it is intended to completely cease the
television performance.
Choose the Input source
Change the picture source so you can watch your TV,
VCR, Cable , or any other devices that are connected to
your TV.
Press A SOURCE button to enter the Input Source
menu and then use
desired items (TV, AV1, AV2, Component, PC, HDMI1,
HDMI2, HDMI3, Multimedia).
Press B OK button to confirm .
button to select the
/
Choose the Menu Language
When you satisfied with your set for the first time,
you must select the language which will be used for
displaying menus and indications.
Press
A MENU and
Press
B
D MENU to
/
Select a particular language by pressing C OK repeatedly.
When you satisfied with your choice, press
return to normal viewing.
/to select Function menu.
button to select language option.
Picture Menu
The TV menu gives you an overview of the menus you
can select.
Note
Depending on the input signal, one or more menu ❏
items may not be selectable.
How to select picture mode
The picture mode provides the pre-defined images
settings:
You can press P.MODE button on the remote control
to select the option Standard, Mild, User,
EyeGuard
Standard, Mild, User, Dynamic and EyeGuard
Dynamic and
.
.
14 LED -LCD television Owner’s Manual
Basic Receiving and Playing Operations
How to customize your own picture status
Press A MENU button and then use
select Picture menu.
Press
B
press OK to enter its submenu.
Press
C
/
button to select the desired items.,
/
button to adjust the setting.
Contrast
This will adjust the intensity of bright parts in the
picture but keep the dark parts unchanged.
Brightness
This will adjust the light output of the complete
picture, which will mainly aect the darker areas of
the picture.
Color
This will adjust the saturation level of the colors to suit
your personal preference.
Sharpness
This will adjust the sharpness of fine details in the
picture.
Note
The picture options can only be adjusted in the ❏
User mode. The other picture modes are preset.
/button to
Palette:
Press / to select the Palette option, and then
press OK to enter its submenu, and finally press
/
to select a toner pattern from six patterns
(Cool2, Cool1, Standard, Warm1, Warm2, User) to your
color preference. Normally, the Standard mode is
selected.
If the User mode is selected, press / to enter
the palette menu, (as shown in the below figure),
and then press /to select a benchmark in the
range of 2500K~15000K from warm color to cold
color, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
Picture
Sound
Volume Balance Digital SRS AVL MAXX Bass Reset
Programe. Auto Tun. Exchange
Channel
Language Menu Time
Function
out
Adjust
Image Po.. Horizont Wertical. Auto.. Clock Phase Reset
Current.. Off Time Off Time On Channel Remind T.. Remind C..
Timer
/ to adjust; if a dierent
Picture MEMC DSM Background OPC Eye Guard Reset
Optimize Mode
Reset
Press /to select OK or Cancel.
Sound menu
How to select sound mode
Press A MENU button and then use
select Sound menu.
Press
B
press OK to enter its submenu.
button to select Digital tone Mode.
/
/button to
Tint
Allows you to select the color mix (Tint) of the picture.
Backlight
press /to adjust the backlight(0--------10).
3D_DIM
Select the 3D-DIM Demo or 3D-DIM Calibration, Press
OK to set.
PressC
Music, Movie and User.
/button to select the option Standard,
LED -LCD television Owner’s Manual 15
Basic Receiving and Playing Operations
You can also press • S.MODE button on the remote
control to select the Audio Mode: Standard,
Music, Movie and User.
How to Customize your own sound
status
Press A MENU button and then use
select Sound menu.
Press
B
press OK to enter its submenu.
Press
C
Volume
Press / to adjust the volume of a TV Program.
Balance
This will adjust the output of the right and left
speakers to obtain the best stereo reproduction for
your listening position.
The intermediate value is 0. When indication value
of Balance increases toward 50, sound of the right
and left speakers becomes stronger and weaker,
respectively. When indication value of Balance
decreases toward -50, sound of the right and left
speakers becomes weaker and stronger.
button to select the desired items,
/
button to adjust the setting.
/
/button to
The surround sound feature expands the audio
listening field wider and deeper to create exceptional
sound quality from the TV’s speakers.
AVL (Automatic Volume Limit)
This will reduces the dierences in volume level
among broadcasters.
Woofer
To adjust the super bass. Press / to select super
bass o, low , high or Middle.
Reset
Return to factory default settings.
Channel menu
Display channel menu by pressing SOURCE button then
use
A MENU button and then use
B
button to select the source of TV item.
/
Press
select Channel menu.
Press
press OK to enter its submenu.
button to select the desired items,
/
/button to
Digital tone
This select the modes for sound reproduction dependent
on the broadcast signals or signals from external inputs
received.
Select the mode of sound (User/Standard/Music/Movie).
If the User mode is selected, press / to select
a benchmark in the range of 50~15K from bass to
treble, afterwards press
benchmark is selected for adjustment, the original
adjustment data will be automatically cleared.
Surround
16 LED -LCD television Owner’s Manual
/ to adjust, if a dierent
Programme Edit
You can add a label to a channel to make it easier to nd.
Press
A MENU button and then use
select Channel menu.
Press
B
and then press
button to select the Programme Edit,
/
OK to enter submenu.
/ button to
Basic Receiving and Playing Operations
1. Use Direct-digit Choosing button to select the
number of the channel to be recovered.
2. Do the above steps again.
3. Press
to set Skip as Off.
/
Auto Tuning
Manual Search
Press / to select the Search
press
/
to start manual search. Upon finding a
program, the search will automatically stop, and the
program will be stored onto the current channel.
You may stop the search by pressing OK or MENU
option, and finally
.
Fine Tune
Press / to select the Fine Tune option, and
then press
until obtaining a relatively good picture effect. The
fine tuning function is for the purpose of improving
picture effect through fine tuning when that of a
certain program is not good enough. Normally, the
optimal picture effect can be obtained without fine
tuning when watching TV programs, and fine tuning
is to meet the need of adjusting a certain program.
/
to start UP or DOWN fine tuning
Color system
Press / to select the Color Systems option,
and then press
system.
The TV is designed with three systems for your
choice, i.e. Auto, PAL , SECAM and NTSC. Generally,
the system is set as Auto and it is not necessary to
make an adjustment. The system is normally set as
Auto during auto search.
to select correct color
/
Sound system
The TV is designed with four systems for your
choice, i.e. DK, M, BG and I. Generally, it is not
necessary to adjust the system. The system is
normally set as DK during auto search.
Skip
When the skip is set ON, the channel will be
skipped when pressing CH or CH and only can
be selected by pressing 0-9 numerical keys.
If you want to recover the skipped channel
Press A MENU button and then use
select Channel menu.
Press
B
press OK the menu opens.
PressC
the remote to start to scan. Press MENU button to
return to the previous menu, press EXIT button to
EXIT the menu screen.
All channels now available will be automatically preset in
order .After the search has nished, the rst program
number will display on the screen.
This search automatically adds only the active channels
in your area to the TV's memory.
It deletes any channels on which there is no broadcast or
a poor signal.
The channels found are automatically saved.
button to select Auto Tuning, then
/
button to select OK, press
/
/button to
OK
button on
Exchange
Press A MENU on the remote control unit or MENU on
the TV’s front panel to display main menu, and then
press
Press
B
and then press OK to enter its submenu.
Press C
then press
/to select Channel menu.
to select the Prog. Exchange option,
/
/ to select the To Channel option, and
to set the found to be exchanged to
/
.
LED -LCD television Owner’s Manual 17
Basic Receiving and Playing Operations
After adjusting the current channel and the found to D
be exchanged to, press / to move the cursor
to the Exchange option, and then press OK to start
exchange and exchange the program on current
channel to the channel you set for exchange.
Function Menu
Function Menu Set
Press A MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu, and
then press
Press B
and then press
Language
Two languages (i.e. Simplified Chinese and English)
are available for your choice.
/
/
to select the Function menu.
to select the option to be adjusted,
to adjust it.
/
Press •
Press • OK to enter the submenu.
Press •
Management to be adjusted, and then press
/
Press •
then press
MEMC
Press /to set ON, Demo1,Demo2 or OFF, the
moving picture will be better when MEMC is on
function. (This function is only available for LE55A300/
LB55R3)
DSM
Press /to select DEMO OFF, DEMO1, DEMO2,
DEMO3.
Blackground
Press / to set ON or OFF, if you select ON, the TV
screen will be blue if no signals are available.
OPC
Press •
and
/
Normnal/Night.
Press •
to set 0-10.
Press •
adjusted, and then press
OFF.
to select the Picture Optimize option.
/
/ to select theDCDI/Color
to select ON or OFF.
/ to select the DNR to be adjusted, and
/to select the OPC , t
/to select the Adjust , t
/ to select theDynamic Contral to be
to select Low/Middle/High/ O.
/
hen press OK
to select Uesr/Dynamic/Daylight/
hen press /
to select ON or
/
Menu Timeout
The option is for adjusting the menu display time.
Press / to set the desired time (5-15s).
Picture Optimize
18 LED -LCD television Owner’s Manual
Eye guard Mode
Press •
Press • OK to enter the submenu.
Press •
/
Press •
Watching E.G/Watching E.G.Delay to be adjusted,
and then press
to select the Eye guard Mode option.
/
/to select the Power E.G.Mode , t
to select Standard/Eye Guard/Curtain.
/ to select the Change Ch.E.GI/
to select ON or OFF.
/
hen press
Basic Receiving and Playing Operations
Clock
This is used for adjusting the phase of pixel clock in PC
mode.
Phase
This is used for adjusting H Position and V Position as
well as relative parameters in PC modes.
Reset
Return to factory default settings.
Reset
Press / to
you want to reset option values.
select
OK or Cancel which with Do
Adjust Menu
The TV can be used as a display, and you may adjust
relevant settings.
input to PC mode.
Press
A MENU to display the screen main menu, and
then press
shown in the below figure.
Press B
Press
C
Image Position
This is used to adjusting H-Position and V-Position.
H-Size
Horizontal size of picture can be adjusted in this item.
Press SOURCE to switch the signal
/ to select the Adjust menu as
On Time
to select the option to be adjusted.
/
to adjust it.
/
Time Menu
Press A MENU button and then use
select Time menu.
Press
B
enter its submenu.
Current Time:
moment upon turning the TV on. At first, check whether
the time indicated on the TV's clock is consistent with the
standard time of your time zone; if not, adjust the clock as
follows:
Press • MENU on the remote control unit or MENU
on the TV’s front panel to display the main menu,
and then press
afterwards press
option, press OK to enter the submenu.
Press •
Press •
After finishing time setting, press • OK or MENU to
confirm.
to select the desired option, press OK to
/
The current time is calculated from the
/
to set hour and minute.
/
/ to adjust the time.
to select the Timer menu,
/
to select the Current Time
/button to
V-Size
Vertical size of picture can be adjusted in this item.
Auto Adjust
Vertical and Horizontal position of picture can be
adjusted in this item.
O Time/On Time: Set a time for the TV to turn o or
on.
This function allows the TV to automatically turn on or
enter standby mode upon reaching the preset time.
Press OK to enter the setting screen, and then •
press
press
/to select ON or OFF, if you select ON,
to set hour and minute. ON indicates
/
LED -LCD television Owner’s Manual 19
Basic Receiving and Playing Operations
the On/O Time function is enabled while OFF
indicates the function is disabled.
. •
After finishing time setting, press OK or MENU to
confirm.
Note
After setting the On/O Time function, if the TV is AC
o or forcible DC o, the function will be automatically
cleared.
On channel:
the On/O Time function. When the TV turns on upon
reaching the On time, it automatically enters the preset
channel.
Remind Time/Remind channel:
remind channel functions allow the TV to automatically
enter the preset channel at preset time. If the TV is AC o
or forcible DC o, the preset time will be cleared.
This function is used in combination with
Press • OK rst and then press/to set the On
Channel or OFF.
The remind time and
Press • MENU on the remote control unit or MENU
on the TV's front panel to display the main menu,
and then press
afterwards press / to select the Remind
Time option.
Press OK to enter the setting screen, and then •
press
press
press
After finishing time setting, press • OK or MENU to
confirm
Press •
option, and press OK rst and then press
to set the found
/ to select ON or OFF, if you select ON,
/
/ to adjust time.
/
/ to select the Timer menu,
to set hour and minute, and then
to select the Remind Channel
/
.
Lock Setup
The television has the function of security default lock.
Password needs to be entered when the program lock
mode is to be set.
How to use the password function
Press H. LOCK, the TV screen will display Enter Password
to prompt the user to enter password by pressing
corresponding numerical keys; if the password is correct,
the user enters the Lock Set menu; if incorrect, the user is
required to enter a password again.
If there is no operation for a few seconds, the display will
automatically disappear.
The Lock Set menu is as follows:
Lock Set
Change Password OK
Tuning Lock
Preset Source
Preset Prog
Source Lock OK
Child Lock
Max Volume 100
Power On Volume off
Unlock OK
off
off
off
off
Change Password
After entering the Lock Set menu, press / to
select the Change Password option, and then press
OK to display the Change Password menu, afterwards
enter a new 4-digit password by pressing numerical
keys and repeat entering this password once again.
If the user does not want to change the password in
halfway, he may press MENU to exit from this menu.
Note
The initial password is 0000, and the password setting
will not be changed after executing the Unlock
option.
Tuning Lock
Press / to select the Tuning Lock option, and
then press / to set ON or OFF.
(If set ON, the Tuning Menu is not available in TV
mode. To make any operation related to the Tuning
Menu, it need to enter the Lock Set menu to set
Tuning Lock OFF or execute the Unlock option.)
Preset Source Setting
Preset Source may be set as O, TV, AV,Component,
HDMI, PC and USB. When the Preset Source is set as
TV, after entering the Preset Channel menu, press
to select the preset channel, and
/
will be forcibly switched to the preset one upon
turning the TV on; when the Preset Source is set as
other signal sources, the TV will be forcibly switched to
the preset source upon turning on. For example, when
the Preset Source is set as
switched to
OFF, the preset function will be closed.
YPbPr/YCbCr upon turning on; when set as
YPbPr/YCbCr, the TV will be
the channel
Preset Prog
20 LED -LCD television Owner’s Manual
Basic Receiving and Playing Operations
Only when the Preset Source is set as TV can the
Preset Channel option be available. Press
select preset channels from 0-254.
/
to
Source Lock
This function is used to prohibit watching a program
from various external inputs, e.g. AV and PC, etc. Press
/ to select a certain option, and then press OK
to enter the submenu, press / to set an external
input lock ON or OFF. If an external input lock is set
ON, after entering this mode, the screen will display
blue background with muting and a prompt Source
Lock; during Source Lock prompt, Source Lock will
remain if there is no other display on the screen. To
watch a program from a locked external input, just
enter Source Lock submenu to set corresponding
status as OFF or execute the Unlock option in the Lock
Set menu.
Child Lock Setting
Press / to select the Child Lock option, and then
press / to set ON or OFF. If set ON, this control
key will not respond, and the screen will display Child
Lock when the key is pressed; if no other operation is
made, the display will automatically disappear later.
To resume Child Lock function, just enter the Lock Set
menu to set Child Lock OFF or execute the Unlock
option.
Max Volume Setting
Press / to select the Max Volume option, and
then press / to freely adjust the max volume
within the range of 0~100. After finishing the setting,
the max volume in the Volume menu will not exceed
the preset max volume; for example, if the preset
max volume is 30, the volume in the Volume menu
can not be increased any longer upon reaching 30;
if the preset max volume is less than the value in the
Volume menu, the latter will decrease along with the
decrease of preset max volume.
Power on Volume
Press / to select the Power on Volume option,
and then press
within the range of 0~100.
to freely adjust the volume
/
Unlock Setting
Press / to select the Unlock option, and then
press OK to clear all the lock settings, namely set all
the lock setting options as OFF; the Preset Channel
is set as OFF and max volume returns to 100 (except
password).
Streaming Media Playing
System
Note
The diagrams in the following section are ❏
schematic and only for your reference. Please see
the actual product if necessary.
A
Supported file formats:
Picture: •
Music: •
AAC(16-576kbps)
Movie: •
MPEG4: *. avi files in accordance with Div*4. x/5. x
MPEG2: some *. mpeg files;
MPEG1: *. dat and some *. mpeg files;
RealVideo
Text: •
Note
Due to the particularity of file coding, some files ❏
may be unable to be read.
Supported equipment:
B
Support the equipment that supports Mass Storage
Protocol and whose file system is FAT/NTFS/FAT16/
FAT32, such as some USB disks, mobile hard disks,
card readers, MP3 players and digital cameras.
If USB equipment could not be identified due
to unsupported file system, please format the
equipment to the above-mentioned file system;
The external card reader supports most of the digital
C
cards in the current market; the types of digital cards
that can be read are relevant to the performance
of selected card reader; you may attach standard
mobile hard disks (working voltage 5.0V, working
current not higher than 500mA); during media
playing, do not pull out storage media, otherwise it
may cause system halt, damage the files in storage
media or damage USB equipment; sometimes, the
TV may halt due to overhigh information error rate,
in which case you should restart the system; there
are a lot of nonstandard USB mobile equipment
in the market, they may not be identified when
connected to the streaming media playing system;
the above phenomena may also occur on computers
and are not the TV’s fault.
. JPEG; PNG; BMP;
*
. Mp3(8-320kbps; WMA(32-192kbps);
*
Protocol;
. Txt.
*
LED -LCD television Owner’s Manual 21
Basic Receiving and Playing Operations
To achieve smooth playing, ensure the following:D
The file code rate should be lower than 300KB/S; •
Due to the limitation of USB signal transmission •
distance, it is recommended not to use USB patch
cord, in case of using the cord, make sure that its
length is not over 1m;
Use high-speed USB equipment in conformity •
with USB2.0 Interface Standard; if USB equipment
in conformity with USB1.1 Interface Standard is
used, the playing may be unsmooth.
Although many movie files are with such postfixes as
E
avi and mpeg, actually there are several formats in the
files; however, the TV can only play some files in avi
and mpeg formats. Some files with the postfix "dat"
are not movie files, but data files commonly used in
computers, and they can not be played as movies.
Start/Exit Streaming Media Playing
System
Press A USB on the remote control unit to select the
streaming media function.
Insert USB equipment into corresponding USB
B
interface 2s after starting the system.
C
After entering the system menu, press
the remote control unit to select the required USB
equipment, and then press
control unit to select the required file.
D OK to enter the selected file.
Press
To exit the streaming media playing system and E
watch a TV program, you must return to the
streaming media main menu at first (to protect
equipment), and then press SOURCE to select TV or
directly press USB to return to the TV mode.
/ on the remote
/
on
Press A
submenu and select your desired option.
Press
B OK to confirm your selection.
C REV/FWD to achieve the FF (fast forward) and
Press
FB (fast back) of the movie or music being played.
D PLAY/PAUSE to pause playing, and press it
Press
again or press OK to continue playing.
E ZOOM to magnify pictures; in zoom mode,
Press
press / and / to move the picture.
Press F OK to display and press EXIT to exit the screen
display information while playing.
G BACK to stop playing, or return to the previous
Press
menu, and press BACK repeatedly to return to the
main menu.
/ to scroll through main menu or
Playing a Picture
After entering USB main interface, press A
select a harddisk partition, and then press
select the Picture option.
Press B OK to confirm the selection and enter the
picture playing interface.
Press
C
select the picture you want to play, and then press
OK to enter the playing display interface.
Press • ZOOM to magnify the picture, and then
press
Press •
Press •
to change page, and press / to
/
// T to move the picture.
/
to select the last or next picture.
/
/ to rotate the picture.
/
to
/ to
Operating Method of Streaming
Media Menu
22 LED -LCD television Owner’s Manual
To exit playing, just press D BACK repeatedly.
Playing a Movie
Basic Receiving and Playing Operations
select the music you want to play, and then press OK
to play the music.
After entering USB main interface, press A
select a harddisk partition, and then press / to
select the "Movie" option.
Press B OK to confirm the selection and enter the
movie playing interface.
Press
C
select the movie you want to play, and then press
OK to enter the playing display interface.
/ to change page, and press / to
Press •
to select the last or next movie.
/
/
to
To exit music playing, just press D BACK repeatedly.
Tex t
After entering USB main interface, press A
select a harddisk partition, and then press
select the Text option.
B OK to confirm the selection and enter the text
Press
playing interface.
C
Press
to read, and then press OK to play the text reading
interface. Press / to change page, and press
BACK to exit the reading interface.
/// to select the text you want
/
to
/ to
To exit playing, just press D BACK repeatedly.
Note
The menu display varies with the number and ❏
names of files in your equipment.
Playing Music
After entering USB main interface, press A
select a harddisk partition, and then press / to
select the Music option.
Press B OK to confirm the selection and enter the
music playing interface.
C
Press
/
/
to change page, and press / to
to
To exit the Text mode, just press D BACK repeatedly.
Settings
B OK to confirm the selection and enter the
After entering USB main interface, press A
select the Settings option.
Press
settings selection interface, and then press
to select the required options.
LED -LCD television Owner’s Manual 23
/to
/
Maintenance/Troubleshooting
Photo Slide Time
Set the scan speed of pictures to be scanned in slide
form.
There are three options (Middle/Slow/fast). Press
to select the desired option.
/
Movie Subtitle
Select "ON" or "OFF".
(such as a vacation), it’s a good idea to unplug the power
cord to protect against possible damage from lightning
or power surges.
Troubleshooting
For the sake of time and cost, it is strongly
recommended that you checkout the problem by
yourself according to the instructions listed hereunder
before contacting the after-sales service for technical
assistance.
Problem Possible remedies
Turn onthe power supply; Properly
No
picture,
no sound
plug theTV setto the powersocket;
Check to see if the power cable of other
appliance is plugged in the TV set.
sure that the power cable of the TV set
is properly connected.
Make
Maintenance
Maintenance
Early malfunctions can be prevented. Careful and regular
cleaning can extend the amount of time you will have
your new TV. Be sure to turn the power o and unplug
the power cord before you begin any cleaning.
Cleaning the Screen
Here’s a great way to keep the dust o your screen A
for a while. Wet a soft cloth in a mixture of lukewarm
water and a little fabric softener or dish washing
detergent. Wring the cloth until it’s almost dry, and
then use it to wipe the screen.
Make sure the excess water is o the screen, and
B
then let it air-dry before you turn on your TV.
Cleaning the Cabinet
To remove dirt or dust, wipe the cabinet with a soft, dry,
lint-free cloth. Please be sure not to use a wet cloth.
Problem Possible remedies
Good
picture,
no sound
Failure of
remote
controller
No color,
weak color
or poor
picture
Excessive
brightness
or darkness
Picture
too big or
small
One
speaker
failure
Depress the volume button;
Check out theaudio frequency input signals.
Check to see if the remote controller
display receiving window are blocked
by other objects and if batteries are
properly loaded.
Designate the item of color from the
Picture menu and depress the volume
button; Keep the display and VCR
separate a reasonable space; Activate
some functions to store picture
brightness; Make sure that the display
and signal source are available and
turned on.
Adjust brightness or contrast.
Adjust the setup of sizes.
Balance the sound in the menu.
Extended Absence
If you expect to leave your TV dormant for a long time
24 LED -LCD television Owner’s Manual
Slight
sound
from
display
It is a normal phenomenon.
Specications/Format
Note
Do not leave the television with static picture in an ❏
extended period as it may result in residual image
on your television screen.
Note
Production of the screen requires high and precision ❏
technologies. However, there might be some
dank or bright (red, blue or green) spots, or some
anomalistic stripes or spots. This is not defect. If the
TV set is used in an area 2,400 meters above the sea
level where the air pressure is below 750hpa, the
picture on the screen maybe aected and a mued
sound might be produced. These phenomena
might happen in the area 1,500 meters above the
sea level. This is resulted from dierence between
air pressures inside and outside the display. This is
not a defect covered by the limited warranty.
Specification
Basic specification and parameter
Power ~ 150-240V 50/60Hz
Color System PAL, SECAM,NTSC
Stand-by
Consumption
D/K, B/G, I, M
Owner’s manual x1
Remote Control x1
Accessories
Alkaline battery x2
(This is only available for certain
models,please refer to actual products.)
Product main size (contain stand)
MODEL
LE32A300
LE42A300
LE55A300
LB32R3A
LB42R3A
LB46R3A
LB55R3A
LE32H300
LE42H300
L32K3
L42K3
Note
Design and specifications are subject to change ❏
without notice. The dimension in this manual is a
approximation.
Power
Consumption
60W
110W
160W
100W
160W
180W
300W
60W
110W
100W
160W
Net Size(LxWxH)
788x210x559mm
1019x265x705mm
1315x280x689mm
796x230x590mm
1020x290x724mm
1122x330x789mm
1328x365x895mm
782x160x557mm
1019x265x705mm
798x230x575mm
1021x290x704mm
Net
Weight
8.7Kg
19.5Kg
28.5Kg
11.8Kg
27.5Kg
29.0Kg
39.0Kg
10.8Kg
19.5Kg
12.6Kg
20.5Kg
Video Input USB,AV, Component, HDMI or PC,
Operating temperature range:
+5°C - +35°C Operating
humidity range: 20%-80%
Storage Temperature:
-15°C~+45°C
Storage Humidity: 5%-90%,
non-condensing
Environmental
condition
If the storage temperature is
lower than 0 °C, please first
lays the machine aside after
in the operating temperature
environment carries on restores
2 hours, then electrifies the use
again, protects your television
not to receive the damage.
Format
Recommendatory HDTV/
SDTV(YPbPr/YCbCr) format
Sequence
Number
1 480i/480p 60
2 576i/576p 50
3 720p 50/60
4 1080i/1080p 50/60
Format
Recommendation PC connection
input format
LED -LCD television Owner’s Manual 25
Refresh
Frequency (Hz)
Format
sequence
number
1 640*480@60Hz 31.5 60
2 800*600@60Hz 37.88 60
3
Format
1024*768@60Hz
(Recommendatory)
H-Frequency
(KHz)
48.36 60
V-Frequency
(Hz)
Recommendation DVI connection
input format
Sequence
Number
1 640*480 60
2 800*600 60
3 1024*768 60
Resolution
Refresh Frequency (Hz)
Recommendation HDMI
connection input format
Sequence
Number
Format
Refresh Frequency (Hz)
1 480i/480p 60
2 576i/576p 50
3 720p 50/60
4 1080i/1080p 50/60
26 LED -LCD television Owner’s Manual
Maintenance / Troubleshooting/Specication
LED -LCD television Owner’s Manual 27
Specication / Format
LED -LCD television Owner’s Manual 28
Loading...