Hitachi L32HP03U User Manual

32" LCD Colour Television

L32HP03U

Instructions for use

GB

Contents

Features ................................................................. 3

Accessories ............................................................ 3

Introduction ............................................................. 4

Preparation ............................................................. 4

Safety Precautions ................................................. 4

Power Source ..................................................... 4

Power Cord ......................................................... 4

Moisture and Water ............................................ 4

Cleaning.............................................................. 4

Ventilation ........................................................... 4

Heat and Flames ................................................ 4

Lightning ............................................................. 4

Replacement Parts ............................................. 4

Servicing ............................................................. 5

Waste Disposal ................................................... 5

Information for Users in European Union

Countries ............................................................ 5

Disconnecting the Device ................................... 5

Headphone Volume ............................................ 5

Installation........................................................... 5

LCD Screen ........................................................ 5

Warning .............................................................. 5

Overview of the Remote Control ............................ 6

LCD TV and Operating Buttons .............................. 7

Viewing the Connections- Back Connectors .......... 8

Viewing the Connections - Side Connectors ........ 10

Power Connection .................................................11

Aerial Connection ..................................................11

Using the Cable Holder .........................................11

Using Digital Multimedia Connectors.................... 12

USB Memory Connection ................................. 12

Connecting the LCD TV to a PC ........................... 13

Connecting to a DVD Player................................. 14

Using Side AV Connectors ................................... 15

Using Other Connectors ....................................... 16

Connecting Other Equipment via Scart ................ 17

Inserting Batteries in the Remote

Control Handset.................................................... 18

Operating Range for the Remote Control ............. 18

Switching the TV On/Off ....................................... 18

To Switch the TV On ......................................... 18

The TV will then switch on. ............................... 18

To Switch the TV Off ......................................... 18

Input Selection ...................................................... 19

Basic Operations .................................................. 19

Operation with the Buttons on the TV ............... 19

Volume Setting .............................................. 19

Programme Selection ................................... 19

Viewing Main Menu ....................................... 19

AV Mode ....................................................... 19

Operation with the Remote Control .................. 19

Volume Setting .............................................. 19

Programme Selection (Previous or Next

Programme) .................................................. 19

Programme Selection (Direct Access) .......... 19

Initial Settings ....................................................... 20

General Operation ................................................ 21

Information Banner ........................................... 21

Electronic Programme Guide (EPG) .................... 21

Displaying the Subtitles .................................... 22

Digital Teletext (** for UK only) ......................... 22

Analogue Teletext ............................................. 22

Widescreen ....................................................... 22

IDTV Menu System .............................................. 23

Channel List ...................................................... 23

Navigating the Entire Channel List ............... 23

Moving the channels in the channel list ........ 23

Deleting the Channels in the Channel List .... 23

Renaming Channels ..................................... 24

Adding Locks to Channels ............................ 24

Setting Favourites ......................................... 24

How to Add a Channel to a

Favourites List ........................................25

Removing a Channel from a

Favourite List .......................................... 25

On Screen Help ........................................... 25

Program Guide ............................................. 25

Timers ............................................................... 25

Conditional Access ........................................... 26

TV Setup ........................................................... 26

Setup ................................................................ 26

Confi guration ................................................ 26

AC3 Audio (*for EU countries only) ........27

Hard of Hearing (*for EU countries only) 27

Favourite Mode.......................................27

Channel List ...........................................27

Scan Encrypted .....................................27

Receiver Upgrade ..................................27

Over Air Download (OAD) ......................27

Parental Control .....................................28

Maturity Lock ........................................28

Menu Lock ...........................................28

Set PIN .................................................28

Time Settings ..........................................28

Audio Description ...................................28

Audio Description .................................29

Preferred Language ............................. 29

Relative Volume ...................................29

Standby Search (*) .................................29

Language ...................................................... 29

Preferred.................................................29

Current....................................................29

Language Settings ............................................ 29

Installation ..................................................... 30

Automatic Channel Scan ........................ 30

Manual Channel Scan ............................30

Clear Service List (*) ............................ 30

First Time Installation..............................31

Media Browser .................................................. 31

Playing MP3 Files ............................................. 32

English - 1 -

Viewing JPG Files ............................................. 32

Slideshow Options ............................................ 32

Video Playback ................................................. 33

Navigating the Analogue TV Menu System .......... 33

Analogue TV Menu System .................................. 33

Picture Menu..................................................... 33

Mode ............................................................. 33

Brightness/Contrast/Colour/Sharpness ........ 33

Colour Temp .................................................. 34

Noise Reduction ........................................... 34

Film Mode ..................................................... 34

Game Mode .................................................. 34

Picture Zoom ................................................ 34

Reset ............................................................ 34

Store ............................................................. 34

Sound Menu ..................................................... 34

Volume .......................................................... 34

Equalizer ....................................................... 34

Balance ......................................................... 35

Headphone ................................................... 35

Volume....................................................35

Store ....................................................... 35

Sound Mode ................................................. 35

AVL ............................................................... 35

Spdif Out ....................................................... 35

Store ............................................................. 35

Feature Menu ................................................... 35

Pip-Pap ......................................................... 35

Pip-Pap ................................................... 36

Pip Size ..................................................36

PIP Position ............................................ 36

Source .................................................... 36

Program .................................................. 36

Swap.......................................................36

Sleep Timer ................................................... 36

Child Lock ..................................................... 36

Language ...................................................... 36

Default Zoom ................................................ 36

Blue Background .......................................... 36

Menu Background ......................................... 36

Backlight ....................................................... 36

Menu Timeout ............................................... 36

Teletext Language ........................................ 37

Antenna Power (optional) ............................. 37

Ext Out .......................................................... 37

Install Menu ...................................................... 37

Program ........................................................ 37

Band ............................................................. 37

Channel ........................................................ 37

Colour System .............................................. 37

Sound System .............................................. 37

Fine Tune ...................................................... 37

Search .......................................................... 37

Store ............................................................. 37

Install Menu in AV Modes .............................. 37

Colour System ........................................ 37

Store ............................................................. 38

Program Table ............................................... 38

English - 2 -

Name ...................................................... 38

Move ....................................................... 38

Delete ..................................................... 38

APS (Auto Programming System) .......... 38

Country ................................................38

Source Menu .................................................... 39

PC Mode Menu System........................................ 39

PC Position Menu ............................................. 39

Autoposition .................................................. 39

H (Horizontal) Position .................................. 39

V (Vertical) Position ...................................... 39

Phase ............................................................ 40

Dot Clock ...................................................... 40

PC Picture Menu ........................................... 40

Sound Menu ................................................. 40

Feature Menu ............................................... 40

Source Menu ................................................ 40

Displaying TV Information .................................... 40

Mute Function ....................................................... 40

PIP (Picture-in-Picture) and PAP (Picture-and-

Picture) Modes ..................................................... 40

Picture Mode Selection......................................... 41

Freezing Picture ................................................... 41

Zoom Modes......................................................... 41

Auto .................................................................. 41

16:9 ................................................................... 41

4:3 ..................................................................... 41

Panoramic......................................................... 41

14:9 ................................................................... 41

Cinema ............................................................. 41

Subtitle .............................................................. 41

Zoom................................................................. 41

Teletext ................................................................. 42

Tips ....................................................................... 43

Screen Care...................................................... 43

Image Persistence ............................................ 43

No Power .......................................................... 43

Poor Picture ...................................................... 43

No Picture ......................................................... 43

Sound ............................................................... 43

Remote Control................................................. 43

Input Sources.................................................... 43

Appendix A: PC Input Typical Display Modes ....... 44

Appendix B: AV and HDMI Signal Compatibility

(Input Signal Types) .............................................. 45

Appendix C: Pin Specifi cations............................. 46

SCART connector pin specifi cations ................ 46

HDMI connector pin specifi cations ................... 46

Signal Input ....................................................... 46

PC RGB Terminal (D-sub 15-pin connector) . 46

Appendix E: PIP/PAP Mode Combinations .......... 47

Appendix D: Supported File Formats for

USB Mode ............................................................ 48

Specifi cations ....................................................... 49

UK Guarantee....................................................... 50

Features

• Remote controlled colour LCD TV.

• Fully integrated digital TV (DVB-T).

• Two HDMI connectors for digital video and
audio. This connection is also designed to
accept high defi nition signals.

• 200 programmes from VHF, UHF.

• OSD menu system.

• Two scart sockets for external devices (such
as video, video games, audio set, etc.).

• Stereo sound system. (

• Teletext, fastext, TOP text.

• Headphone connection.

• Automatic programming system.

• Forward or backward manual tuning.

• Sleep timer.

• Child lock.

• Automatic sound mute when no
transmission.

• NTSC playback.

• PIP / PAP / PAT functions.

• AVL (Automatic Volume Limiting).

• When no valid signal is detected, after 5
minutes the TV switches itself automatically
to standby mode.

• PLL (Frequency Search).

• PC input.

• Plug&Play for Windows 98, ME, 2000, XP,
Vista.

• Audio line out.

• Game Mode.

German+Nicam)

Accessories

Remote Controller

Instruction Book

M

SELECT

OK

ABC

DEF GHI

2

1

JKL MNO

5

4

VWX

STU

8

7

0

PP

P+

P -

SWAP

DTV

TV

I-II

P<P

/

WIDE

RC 1050

Batteries

2 X AAA

INFO

3

PQR

6

YZ

9

-/--

EXIT

+

SOURCE

AV

/

GUIDE

English - 3 -

Quick Guide

Cable Holer

Introduction

Thank you for choosing this product. This
manual will guide you
operation of your TV. Before operating
the TV, please read this manual
thoroughly.

Please do keep this manual in a safe
place for future references.

in the proper

Preparation

For ventilation, leave a free space of at least
10 cm all around the set. To prevent any faults
and unsafe situations, please do not place any
objects on top of the set.

Use this device in moderate climates.

Moisture and Water

Do not use this device in
a humid and damp place
(avoid the bathroom, the
sink in the kitchen, and near
the washing machine). Do
not expose this device to
rain or water, as this may be
dangerous and do not place
objects filled with liquids,
such

as vases, on top. Avoid

dripping or splashing.

If any solid object or liquid falls into the cabinet,
unplug the TV and have it checked by qualifi ed
personnel before operating it any further.

Cleaning

Before cleaning, unplug the TV
set from the wall outlet. Do not
use liquid or aerosol cleaners.
Use soft and dry cloth.

Safety Precautions

Please read the following recommended
safety precautions carefully for your
safety.

Power Source

The TV set should be operated only from a 220­240 V AC, 50 Hz outlet.

Power Cord

Do not place the set, a piece of furniture, etc.
on the power cord (mains lead) or pinch the
cord. Handle the power cord by the plug. Do
not unplug the appliance by pulling from the
power cord and never touch the power cord with
wet hands as this could cause a short circuit or
electric shock. Never make a knot in the cord or
tie it with other cords. The power cords should
be placed in such a way that they are not likely
to be stepped on. A damaged power cord can
cause fi re or give you an electric shock. When it
is damaged and needs to be replaced, it should
be done by qualifi ed personnel.

English - 4 -

Ventilation

The slots and openings on the TV set are
intended for ventilation and to ensure reliable
operation. To prevent overheating, these
openings must not be blocked or covered in
anyway.

Heat and Flames

The set should not be placed
near to open flames and
sources of intense heat such
as an electric heater. Ensure
that no open fl ame sources,
such as lighted candles,
are placed on top of the TV.
Batteries should not be exposed to excessive
heat such as sunshine, fi re or the like.

Lightning

In case of storm and lightning
or when going on holiday,
disconnect the power cord
from the wall outlet.

Replacement Parts

When replacement parts are required, make
sure that the service technician has used

replacement parts, which are specifi ed by the
manufacturer or have the same specifi cations as
the original one. Unauthorized substitutions may
result in fi re, electrical shock or other hazards.

Servicing

Please refer all servicing to
qualifi ed personnel. Do not
remove the cover yourself as
this may result in an electric
shock.

Waste Disposal

Instructions for waste disposal:

• Packaging and packaging aids are recyclable
and should principally be recycled. Packaging
materials, such as foil bag, must be kept away
from children.

• Batteries, including those which are heavy
metal-free, should not be disposed of with
household waste. Please dispose of used
battery in an
Find out about the legal regulations which
apply in your area.

• Cold cathode fluorescent lamp in LCD
PANEL contains a small amount of mercury;
please follow the local laws or regulations for
disposal.

enviromentally friendly manner.

Information for Users in European
Union Countries

Disconnecting the Device

The mains plug is used to disconnect TV set
from the mains and therefore it must remain
readily operable.

Headphone Volume

Excessive sound pressure from
earphones and headphones
can cause hearing loss.

Installation

To prevent injury, this device
must be securely attached to the wall in
accordance with the installation instructions
when mounted to the wall (if the option is
available).

LCD Screen

The LCD panel is a very high technology product
with about a million thin fi lm transistors, giving
you fi ne picture details. Occasionally, a few
non-active pixels may appear on the screen
as a fi xed blue, green or red point. Please note
that this does not affect the performance of
your product.

Warning

Do not leave your TV in standby or operating
mode when you leave your house.

The mark is in compliance
with the Waste Electrical
and Electronic Equipment
Directive 2002/96/EC
(WEEE).

The mark indicates the
requirement NOT to dispose
the equipment including any
spent or discarded batteries
as unsorted municipal waste, but use the return
and collection systems available. If the batteries
or accumulators included with this equipment,
display the chemical symbol Hg, Cd, or Pb,
then it means that the battery has a heavy
metal content of more than 0.0005% Mercury,
or more than 0.002% Cadmium or more than,

0.004% Lead.

English - 5 -

Overview of the Remote Control

Standby1.

Cursor up2.

Cursor right3.

Info4.

Numeric buttons5.

Exit (in DTV mode)6.

Programme up7.

Volume up8.

TV / Digital TV9.

AV / Source10.

Yellow (Feature menu) / Current language 11.
(*)

Blue (Install menu) / Favourite selection (*)12.

Hold (in TXT mode) / PIP position13.

Update (in TXT mode) / PAP mode14.

Index page / Guide (in DTV mode)15.

Reveal (in TXT mode) / Switch from TV to 16.
PC

Expand (in TXT mode) / Image Size17.

Mix (in TXT mode) / PIP mode18.

Teletext 19.

Time / Subtitle on-off 20.

Red (Sound menu) / 21. Channel list (in DTV
mode)

Green (Picture menu) / 22. Subtitle (*) (in DTV
mode)

Swap / Previous programme23.

Mono/Stereo - Dual I-II 24.

Programme down / Page up (in DTV 25.
mode)

Volume down 26.

Personal preferences27.

Okay (store) / Select (in DTV mode)28.

Cursor down 29.

Cursor Left30.

Menu31.

Mute32.

(**) (in DTV mode)

32

31

30

29
28

27

26

25

24

23
22

21
20
19
18
17

SELECT

OK

ABC

1

JKL MNO

4

STU

7

PP

SWAP

I-II

P<P

WIDE

M

DEF GHI

2

5

VWX

8

0

P+

P -

DTV

TV

/

RC 1050

+

INFO

3

PQR

6

YZ

9

-/--

EXIT

SOURCE

GUIDE

1

2
3

4

5

6

7

8

9

AV

10

11

12

/

13
14
15

16

(*) Only available for EU country options.

(**) Only available for UK country option.

English - 6 -

LCD TV and Operating Buttons

FRONT VIEW

Standby button1.

TV/AV button2.

Programme Up/3.
Down buttons

Volume Up/Down 4.
buttons

Note: Press “ ”/

“ ”buttons at the

same time to view main
menu.

SIDE VIEW

REAR VIEW

English - 7 -

Viewing the Connections- Back Connectors

12

5Vdc 60mA

1. S/PDIF Digital Out outputs digital audio signals of the currently watched source.
Use

a digital optic cable to transfer audio signals to a device that has S/PDIF input.

2. Subwoofer Out is for connecting an external, active subwoofer to the set to give a much
deeper bass effect.
Use an appropriate RCA cable to connect the set to a subwoofer unit.

Audio Line Out 3. outputs audio signals to an external device such as an optional sound
system.
To connect an external amplifi er and speakers to your TV; connect the TV’s audio LINE
OUT sockets to the line input sockets on an external amplifi er with a stereo phono to phono
cable.

4. SCART 2 inputs or outputs for external devices.

5. SCART 1 inputs or outputs for external devices.
Connect the SCART cable between SCART sockets on TV and SCART socket on your
external device (such as a decoder, a VCR or a DVD player).
Note: If an external device is connected via the SCART sockets, the TV will automatically
switch to AV mode. If both sockets are employed at the same time, SCART 1 will override
SCART 2 unless manually selected.
Note: You should connect the decoder to EXT-1, if you are planning to watch a scrambled
channel. The decoder might not function properly if you do not connect the decoder to the
Scart 1 (Ext-1) socket.

English - 8 -

6. Component Video Inputs (YPbPr) are used for connecting component video.
You can connect the component video and audio sockets with a device that has component
output. Connect the component video cables between the COMPONENT VIDEO INPUTS
on on the TV and the component video outputs of your device. While connecting, be sure
that the letters on your TV, “ Y ”, “ Pb ”, “ Pr ” correspond with your device’s connectors.

7. PC/YPbPr Audio Inputs are used for connecting audio signals of a PC or a device that
connects to the TV via YPbPr.
Connect the PC audio cable between the AUDIO INPUTS on the TV and audio output of
your PC to enable PC audio.
Connect the audio cable between
enable component audio.

8. S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.
Use an SPDIF coaxial cable to trasfer audio signals to a device that has S/PDIF input.

ANT Input9. connects to an aerial.
Note that if you use a decoder or a media recorder, you should connect the aerial cable
through the device to the television with an appropriate aerial cable, as shown in the
illustration on the following pages.

10. PC Input is for connecting a personal computer to the TV set.
Connect the PC cable between the PC INPUT on the TV and the PC output on your PC.

11. HDMI-2: HDMI Input

HDMI 1: 12. HDMI Input
HDMI Inputs are for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Defi nition pictures from devices such as
a High Defi nition Satellite Receiver or DVD Player. These devices must be connected via
the HDMI sockets or Component Socket. These sockets can accept either 720p or 1080i
signals. No sound connection is needed for an HDMI to HDMI connection.

AUDIO IN on the TV and audio outputs of your device to

When you use the wall mount kit (not provided with the LCD TV), we would defi nitely recommend
to plug all your cables into the back of the LCD before mounting to the wall.

English - 9 -

Viewing the Connections - Side Connectors

CI Slot is used for inserting a CI card. A CI card allows 1.
you to view channels that you subscribe to. For more
information, see “Conditional Access” section.

Side USB input . 2.

Note: Codec update cannot be performed.

3. Headphone jack is used for connecting an external
headphone to the system. Connect to the HEADPHONE
jack to listen to the TV from headphones.

Video Input is used for connecting video signals 4. from
external devices.Connect the video cable between the
VIDEO
your device.

Audio Inputs are used for connecting audio signals 5. from
external devices. Connect the audio cable between AUDIO
IN on the TV and the AUDIO OUTPUT jacks on your device.
Note: If you connect a device to the TV via the VIDEO
INPUT, you should also connect your device with an audio
cable to AUDIO IN on the TV to enable audio.

Standby switch is used for turning the TV on or off.6.

IN socket on the TV and the VIDEO OUT jack on

English - 10 -

Power Connection

IMPORTANT : The TV set is designed to operate on 220-240V AC, 50 Hz.

• After unpacking, allow the TV set to reach the ambient room temperature before you connect
the set to the mains.

• Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

5Vdc 60mA

REAR VIEW

Using the Cable Holder

You can use the supplied cable holder as the following:

• Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated
above.

• Place cables into the cable holder after all necessary connections are made.

English - 11 -

Using Digital Multimedia Connectors

• You can connect USB devices to your TV by using the USB input of the TV. This feature allows
you to display/play JPG and MP3 fi les stored in a USB stick.

• It is possible that certain types of USB devices
this TV.

• You may back up your fi les before making any connections to the TV set in order to avoid any
possible data loss. Note that manufacturer will not be responsible for any fi le damage or data
loss.

• Do not pull out USB module while playing a fi le.

CAUTION: Quickly plugging and unplugging USB devices, is a very hazardous operation.
Especially, do not repeatedly quickly plug and unplug the drive. This may cause physical
damage to the USB player and especially the USB device itself .

SIDE VIEW USB MEMORY

(e.g. MP3 Players) may not be compatible with

USB Memory Connection

• Plug your USB device to the USB input of the TV.

Note: USB hard disk drives are not supported.

• It is recommended that you connect your USB device directly to the USB input of the TV. Some
compatibility problems may occur if you use a separate cable connection.

English - 12 -

Connecting the LCD TV to a PC

For displaying your computer’s screen image on your LCD TV, you can connect your computer
to the TV set.

• Power off both computer and display before making any connections.

• Use 15-pin D-sub display cable to connect a PC to the LCD TV.

• When the connection is made, switch to PC source. See “Input selection” section.

• Set the resolution that suits your viewing requirements. Resolution information can be found in

the appendix section.

REAR VIEW

5Vdc 60mA

PC audio cable

(not supplied)

to AUDIO INPUTS

on the TV

Audio
Inputs

PC Input

PC RGB cable
(not supplied)
to PC input

English - 13 -

Connecting to a DVD Player

If you want to connect a DVD player to your LCD TV, you can use connectors on the TV set. DVD
players may have different connectors. Please refer to your DVD player’s instruction book for
additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

• If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD
player as illustrated below, switch to HDMI source. See, “Input Selection” section.

Most DVD players are connected through SCART sockets. Use a scart cable to connect as

•
shown below.

• You may also connected through COMPONENT sockets. Use a component video cable to connect
video input. For enabling audio, use a component audio cable as illustrated below. When done,
switch to YPbPr source. See, “Input selection” section.

Note : These three methods of connection perform the same function but in different levels of quality. It is not
necessary to connect by all three methods.

5Vdc 60mA

Scart sockets

Component

video
inputs

REAR VIEW

English - 14 -

Component

audio

inputs

DVD Player

HDMI

inputs

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.

• For connecting a camcorder, connect to the VIDEO IN socket and the AUDIO SOCKETS. For

selecting the related source, see the section “Input selection” in the following parts.

• To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV.

Headphone

Camcorder

SIDE VIEW

English - 15 -

Using Other Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown
below. Note that cables shown in the illustration are not supplied.

• For connecting a to a device that has SPDIF support, use an appropriate SPDIF cable to enable
sound connection.

• To connect external speakers; connect the audio output sockets on the TV to an external amplifi er
that is connected to a speaker system.

• After connecting the cable between your TV and external amplifi er, turn your TV and amplifi er
on.

• You can refer to your amplifi er and speaker set instruction manual for further information.

External Speakers

A device that

supports

SPDIF signal.

5Vdc 60mA

REAR VIEW

English - 16 -

Connecting Other Equipment via Scart

Scart sockets

Decoder

DVD Recorder

Video Recorder

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder
to your LCD TV by using the SCART sockets. Note that cables shown in the illustration are not
supplied.

Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

REAR VIEW

5Vdc 60mA

English - 17 -

Inserting Batteries in the
Remote Control Handset

• Remove the battery cover located on the back
of the handset by gently pulling backwards
from the indicated part.

• Insert two AAA/R3 or equivalent type batteries
inside. Place the batteries in the right directions
and replace the battery cover.

Note : If you are not going to use the remote control
for a long period, please remove the batteries in
order to avoid any battery leakage. Otherwise, the
remote control can get damaged because of battery
leakage.

Operating Range for the
Remote Control

• Point the top of the remote control toward the
LCD TV’s remote sensor LED while pressing
a button.

Switching the TV On/Off

To Switch the TV On

· Connect the power cord to the 220-240V AC
50 Hz.

· Switch the “
will switch to standby mode. Then the standby
LED lights up.

· To switch on the TV from standby mode
either:

· Press the “
button on the remote control.

· Press the -P/CH or P/CH+ button on the TV.

The TV will then switch on.

Note : If you switch on your TV via PROGRAMME
UP/DOWN buttons on the remote control or on the
TV set, the programme that you were watching last
will be reselected.

By either method the TV will switch on.

To Switch the TV Off

• Switch the “ ” button to position 2 as

illustrated,

• To power down the TV completely, unplug
the power cord from the mains socket.

Note: When the TV is switched to standby mode,
standby LED can blink to indicate that features such
as Standby Search, Over Air Download or Timer is
active.

” button to position “|” so the TV

” button, P+ / P- or a numeric

( ) so the TV will switch OFF.

30 30

M

SELECT

INFO

OK

ABC

DEF GHI

2

3

1

JKL MNO

PQR

5

4

6

VWX

STU

YZ

8

7

9

0

-/--

PP

EXIT

P+

+

P -

SOURCE

SWAP

AV

DTV

TV

I-II

P<P

/

/

GUIDE

WIDE

Remote range is approximately 7m/23ft.

English - 18 -

Input Selection

Once you have connected external equipment
to your TV, you can switch to different input
sources.

• Press “
to select the required source.

or,

• Select “Source” option from the main menu
by using “
“ ” button to highlight an input and press “
” button to select.

Note : You can mark desired source options by
pressing the OK button. Therefore, when “
is pressed, only the marked source options will be
available (except for the TV source).

” repeatedly on the remote control

” or “ ” button. Use then “ ” or

” button

Basic Operations

You can operate your TV using both the
remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

• Press “

level scale (slider) will be displayed on the
screen.

Programme Selection

• Press “ P/CH + ” button to select the next
programme or “ P/CH - ” button to select the
previous programme.

Viewing Main Menu

• Press “
time to view main menu. In the Main menu
select sub-menu using “ P/CH - ” or “ P/CH + ”
buttons and enter the sub-menu using “
” or “ ” buttons. To learn the usage of the
menus, refer to the menu system sections.

” button to decrease volume or

button to increase volume, so a volume

”/“ ”buttons at the same

English - 19 -

AV Mode

• Press the “ TV/AV ” button in the control panel
on the TV to switch between AV modes.

Operation with the Remote Control

• The remote control of your TV is designed
to control all the functions on your TV. The
functions will be described in accordance with
the menu system of your TV.

• Functions of the menu system are described
in the following sections.

Volume Setting

• Press “
Press “
A volume level scale (slider) will be displayed
on the screen.

Programme Selection (Previous or Next
Programme)

• Press “ P - ” button to select the previous
programme.

• Press “ P + ” button to select the next
programme.

Programme Selection (Direct Access)

• Press numeric buttons on the remote control
to select programmes between 0 and 9. The
TV will switch to the selected programme.
To select programmes between 10 ­(for IDTV) or 10-199 (for analogue), press
the numeric buttons consecutively (e.g. for
programme 27, first press 2 and then 7).
When the pressing time is due for the second
numeric button, only the fi rst digit programme
will be displayed. The limit of the delay time
is 3 seconds.

• Press directly the programme number to
reselect single digit programmes.

” button to increase the volume.

button to decrease the volume.

299

Initial Settings

When the TV set is operated for the fi rst time,
the IDTV turns on fi rst.

Because this is the fi rst time the TV is used,
there are no channels stored in the memory.

When the TV is turned on for the fi rst time, the
menu for the language selection appears on the
screen. The message “Welcome please select
your language!” is displayed in all language
options sequentially in the OSD.

By pressing the “
the language you want to set and press OK
button and then, “First time installation” OSD
will appear on the screen. By pressing “ ” or “

” buttons, select the country you want to set

and press button (** for EU countries).

Note: Country selection OSD will not be available
for UK.

After the “First time installation” is performed,
the following message appears on the screen:

” or “ ” buttons highlight

After Automatic Search is completed, the
following message asking for analogue channel
search appears on the screen:

To search for analogue channels, select “Yes”.
TV switches to the analogue TV mode. The
menu below is displayed to search for analogue
channels:

To start installation process, select “Yes”, to
cancel select “No”.

• To select the “Yes” or “No” option, highlight the
item by using “

” or “ ” buttons and press the

OK button.

The IDTV will automatically tune to the UHF or
VHF (** for EU countries) transmission channels,
searching for digital terrestrial TV broadcasts
and displaying the names of channels found.
This process will take about a few minutes. To
cancel searching, you can press the “M” button
at any time during the process.

Select your Country, Language and Text
language by using “

” or “ ” and “ ” or “ ”
buttons. Press OK or RED button to continue.
To cancel, press the BLUE button.

For more information on this process, see
“Install Menu” section.

Note : For proper functioning of digital teletext in DTV
mode, you should set country as UK in analogue
AUTO PROGRAM (for UK only).

English - 20 -

General Operation

Pressing the “TV/DTV” button at any time
while watching television programmes will
switch the TV set between the digital terrestrial
television broadcasting and normal analogue
broadcasting.

Information Banner

• Whenever you change channel, using the
P- / P+ button or the numeric buttons, the TV
displays the broadcast picture along with an
information banner at the bottom of the screen
(available only in DTV mode). This will remain
on the screen for a few seconds.

• The information banner can also be displayed
at any time while watching TV by pressing the
INFO button on the remote control:

The information banner gives information on
the channel selected and the programmes on
it. The name of the channel is displayed, along
with its channel list

Hint: Not all channels broadcast the programme
data. If the name and time of the programme are not
available, then information banner will be displayed
with blanks.

• Icons are also displayed in the information
banner and if this channel is a favourite
channel, favourite channel icon will also be
displayed.

• If you press “INFO” button for second time,
extended information will be displayed.

• By using “ ” or “ ”button, you can select
Now & Next events. You can also set timers
while Next events are selected by pressing
OK button.

• Press again to quit “INFO” mode.

If the selected channel is locked, you must
enter the correct four numeric code to view the

number.

channel. “ Enter PIN ” will be displayed on the
screen in such a case:

Electronic Programme Guide
(EPG)

• Some, but not all, channels send information
about the current and next events.

• Please note that event information is updated
automatically. If there is no event information
data available in channels, only channel
names with “No Information Available” banner
is displayed.

• Press GUIDE button to view the EPG menu.

• Electronic Programme Guide appears on the
screen. It is able to get Information of the
channel - programs weekly by means of 7-DAY­EPG. All programs of channels are displayed.
The current program is highlighted and there
is brief information about the programs of
the channel, such as: name, short/extended
event description, start & end time. The time
scale can be changed by pressing left or right
buttons. If there is any event information data
available, only programme names and dates
are displayed. On the bottom of the screen;
info bar, showing all the available commands,
will be displayed.

RED button (Shrink) : makes the info boxes
smaller.

GREEN button (Expand) : makes the info
boxes larger.

YELLOW button (Prev. Day) : displays the
programmes of previous day.

English - 21 -

BLUE button (Next day) : displays the
programmes of the next day.

INFO (Details) : displays the short extended
programmes in detail.

Numeric buttons (Jump) : go to preferred
channel directly via numeric buttons.

OK : views options for future programmes.

P<P : jumps to the current

• Press

“0” button to view Guide Search

broadcast.

menu. Using this feature, you can search the
programme guide database in accordance
with the genre selected or with name match.
Info available in the programme guide will be
searched and results matching your criteria
will be listed. You can select programmes or
set timers by highlighting a channel and then
pressing “OK” button.

Note: Searching process can be performed by the
desired date rate or by the channel basis.

Displaying the Subtitles

With digital terrestrial broadcasting (DVB-T),
some programmes are broadcast with subtitles.
Subtitles can be displayed while watching these
programmes.

Note: You can enable subtitles by pressing the “ ”
(** for UK) or GREEN (* for EU countries) buttons.

Press the “ M ” button to display the main menu,
highlight the Setup and then Language menu
using “ ” or “ ” button and press the OK button
to display the “Language settings” menu.

Highlight the “Subtitle” item in “Language
settings” menu and use “

” or “ ” button to set

Subtitle to the desired language.

If “Subtitle” is on and a language option is set,
pressing the TELETEXT ( ) button causes
the following warning message display on the
screen (* for UK only):

Digital Teletext (** for UK only)

With digital terrestrial broadcasting (DVB-T),
in addition to pictures and sound, you can also
view digital teletext.

Digital teletext is sometimes broadcast at the
same time with the normal

• Press the

TELETEXT ( ) button.

broadcast.

• The digital teletext information appears.

• Operate it with the coloured buttons, cursor
buttons and “OK” button.

The operation method may differ depending on
the contents of the digital teletext.

Follow the instructions displayed on digital
teletext screen.

• When press “SELECT” button or similar
message appears on the screen, press the
OK button.

• When the

TELETEXT ( ) button is pressed,

the TV returns to television broadcasting.

• With digital terrestrial broadcasting (DVB-T),
in addition to digital teletext broadcasting
together with the normal broadcasting, there
are also channels with just digital teletext
broadcasting.

• The aspect ratio (picture shape) when watching
a channel with just digital teletext broadcasting
is the same as the aspect ratio of the picture
viewed previously.

• When you press the

TELETEXT ( ) button
again, the digital teletext screen will be
displayed.

Analogue Teletext

Use of teletext and its functions are identical to
the analogue text system. Please do refer to the
“TELETEXT” explanations.

Widescreen

Depending on the type of the broadcast being
transmitted, programmes can be viewed in
a number of formats. Press the WIDE button
repeatedly to select between Auto, 16:9, 4:3,
Panoramic, 14:9, Cinema, Zoom or Subtitle.

When Auto is selected, the format being
displayed is determined by the picture being
broadcast.

PLEASE NOTE : Menu size changes depending on
the chosen image size.

English - 22 -

IDTV Menu System

The IDTV menu can only be viewed when
watching digital terrestrial broadcasting. Press
the TV/DTV button to turn IDTV on while the TV
is in analogue mode.

Press the “ M ” button. The menu below appears
on the screen:

Channel List

Using the “ ” or “ ” button on the remote
control, make sure that the fi rst item, Channel
List, is highlighted and press the OK button to
display the Channel List.

The following operations can be performed in
this menu:

• Navigating the entire list of channels

• Deleting channels

• Renaming channels

• Adding locks to channels

• Setting favourites

• Moving channels

Channel List is the place where the channels
are managed.

Navigating the Entire Channel List

Press “
previous or next channel. You can press “P+” or
“P-” button to move page up or page down.

” or “ ” button for selecting the

To watch a specifi c channel, highlight it using
“

” or “ ” button and then press “ OK ” button,
while the “Select” item on Channel List menu is
highlighted by using “ ” or “ ” button.

Then the name and number of the selected
channel will be displayed in the top-left and
top-right of the channel display at the top-right
of the screen, respectively.

Moving the channels in the channel list

• Press “

” or “ ” buttons to select the channel

that will be moved.

• Press “ ” or “ ” buttons to select the “ Move ”

item on Channel List menu.

The following OSD will be displayed to indicate
that a channel number should be entered using
the numeric buttons.

Note: If you enter the programme number of the

channel that you want to move, “.... channel services

will be replaced. Do you want to continue?” OSD will
be displayed. Press OK to confi rm or select “No” to
cancel.

Deleting the Channels in the Channel List

• Press “ ” or “ ” button to select the channel

that will be deleted.

• Press “

” or “ ” button to select the “Delete’’

item on Channel List menu.

English - 23 -

• Press the OK button to delete the highlighted
channel in the channel list. Then the message
below appears on the screen:

Press the “M” button to cancel the editing or OK
button to save the new name.

Adding Locks to Channels

Channel locking provides a password-protected
access to channels selected by parents. In order
to lock a channel you should know the parental
lock password (default value is set to 0000 in
the factory and can only be changed from the
Confi guration menu).

Select the channel to be locked by highlighting
it and select the Lock option by pressing “
or “ ” button. When the OK button is pressed,
a dialog OSD asking for the password will be
displayed.

”

Press “
option. If OK button is pressed while “ Ye s ” is
highlighted, the highlighted channel is deleted.
Selecting “ No ” cancels the deletion.

Renaming Channels

To rename a specifi c channel, the channel must
be highlighted by pressing “ ” or “ ” button.
Then highlight the Edit Name item by pressing
“
OK button to activate the rename feature.

Now pressing “
previous/next character. Pressing “ ” or “
” button toggles the current character, i.e., ‘b’
character becomes ‘a’ by “ ” and ‘c’ by “ ”.
Pressing the numeric buttons ‘0...9’ replaces
the highlighted character with the characters
printed above the button one by one as the
button is pressed.

” or “ ” button to highlight the desired

” or “ ” button as illustrated below. Press the

” or “ ” button moves to the

Enter the password by using the numeric
buttons on the remote control. The lock icon “

” will now be displayed next to the selected
channel. Repeat the same operation to cancel
the lock.

Setting Favourites

You can set various channels as favourites so
that only the favourite channels are navigated.

To set a favourite you should highlight the
“Favourites” item at the bottom of the Channel
List menu. Then press OK button Favourite Lists
menu appears on the screen.

You can list your favourite channels using List
1, List 2, List 3, List 4 or List 5.

Using 5 lists enables listing channels for
different categories (sport, music etc.). And
by activating the favourites list number that
you want in Favourite Mode submenu of
Confi guration menu,
lists by pressing the BLUE button (** for EU
countries).
selected list.

Channel list OSD will look like this:

you enable only the channels in the

or by changing favourite

English - 24 -

How to Add a Channel to a Favourites List

• By pressing “

” or “ ” buttons, highlight the
channel that you want to add to the favourite
list.

• Select the list number by pressing “ ” or “
” buttons.

• By pressing OK button, the highlighted channel

is added to selected list number.

• For each channel, an icon indicates which
favourite list a channel is in. (i.e. In fi gure
above, icon indicates that BBC ONE is added
to List 1.)

Removing a Channel from a Favourite List

• Highlight the channel that you want to remove
from the favourite list.

• Highlight the list number from which the
channel will be removed, and press OK button.
The icon indicating the list that contains the
channel disappears on the menu.

Note : A channel can be added to more than one
favourite list.

• To activate Favourites, go to the Confi guration
menu and select the list number in Favourite
Mode you want to activate by pressing “

” or “ ” buttons or by changing favourite
lists by pressing the BLUE button (** for EU
countries). To cancel Favourites, set Favourite
Mode to Off.

On Screen Help

For all menus, press the “INFO” button to display
the help information about the menu functions.
For Channel List menu the following message
is displayed on the screen:

Program Guide

This section is same with the instructions given
in the General Operations page. Please see
Electronic Programme Guide (EPG) section in
the General Operations part.

Timers

To display timers window, activate the item
from the main menu. To add a timer, press the
YELLOW button on the remote control. Then
“Add Timer” window appears.

Channel : “
through the list.

Date : Starting date is entered via the Left/Right
or the numeric buttons.

Start : Starting time is entered via the Left/Right
or the numeric buttons.

End : Ending time is entered via the Left/Right
or the numeric buttons.

Duration: Duration between Start and End
time.

Repeat: You can set a timer to be repeated as
Once, Daily or Weekly.

Change/Delete : permits or prohibits any
modifi cations for other users.

You can save the adjustments by pressing the
GREEN key or cancel the process by pressing
the RED button. You can edit the list via GREEN
key and delete with the RED button.

” or “ ” keys will navigate the user

English - 25 -

Note: You can set timers for the desired broadcast and
time. Recording broadcasts is also possible by using
a recording device that you connect to your TV’s Ext
Out. When the timer is due, output will be provided
via the TV-Out and the recording can be performed
by the connected recorder that you have set.

Conditional Access

• Press the “M ” button to display the main menu
and use the “
“Conditional Access” line and press the
“OK” button:

” or “ ” button to highlight the

• When no module is inserted, “No
module detected” message appears

Access

Conditional

on the screen.

• Refer to the module instruction manual for

details of the settings.

Note: Insert or remove the CI module only when the
TV is in STAND-BY mode or SWITCHED OFF.

TV Setup

You can use this item to display the TV
functions.

The digital TV Setup menu screen is accessed
from the main menu. Press the “M” button to
display the main menu and use “
to highlight “TV Setup”, press the “OK” button
to display TV Setup menu screen.

” or “ ” button

Some Digital Terrestrial channels operate
on a Pay Per View basis. These require a
subscription and a hardware decoder.

Obtain the

Conditional Access Module (CAM)
and the viewing card by subscribing to a pay
channel company, then insert those to the TV
using the following procedure.

• Switch off the TV and unplug from the

mains.

• Insert the CAM and then the viewing card to the

slot that is located in the terminal cover at the
left-hand side of the TV (from front view).

• The CAM should be correctly inserted, it is

impossible to insert fully if reversed. The CAM
or the TV terminal may be damaged if the CAM
is forcefully inserted.

• Connect the TV to the mains supply, switch

on and then wait for few moments until the
card is activated.

• Some CAMs may require the following set

up. Please set the CAM by entering the IDTV
menu,

Conditional Access then pressing
the “OK” button. (CAM set up menu is not
displayed when it is not required.)

• To see the viewing contract information: enter
IDTV; press the “ M ” button, then highlight
Conditional Access and press the “OK”
button.

You can fi nd detailed information for all menu
items in “Analogue TV Menu System” section.

Setup

The adjustments in this menu are given as the
following:

Confi guration

You can confi gure the settings of your TV. Select
Confi guration from Setup menu and press OK
to view this menu. Press the EXIT button on the
remote control to exit.

English - 26 -

AC3 Audio (*for EU countries only)

In the Confi guration Menu, highlight the AC3
Audio item by pressing “
the “

” or “ ” buttons to set the AC3 Audio as

On or Off.

If the channel that you are watching supports
AC3 Audio, turn this setting on.

Hard of Hearing (*for EU countries only)

” or “ ” button to select Hard of Hearing

Use “
and then press “ ” or “ ” button to set this
setting as On or Off.

If the broadcaster enables any special signal
concerning the audio, you can set this setting
as On to receive such signals.

Favourite Mode

This function enables or disables the 5 favourite
channel list mode by pressing “
and OK . If a favourites list exists, it will switch to
the list number selected. If there is no favourite
listing, a warning message will be displayed.

Channel List

” or “ ” buttons to go to Channel List

Use “
option. Use “ ” or “ ” buttons to toggle Channel
List Mode. If you select “TV Only”, with the “
” or “ ” buttons, you navigate through only TV
channels. If you select “Radio Only”, with the “ ”
or “ ” buttons, you navigate through only radio
channels. If you select “Text Only”, with the “ ”
or “ ” buttons, you navigate through only text
channels. To save the recent changes and exit;
press the “M” button.

Scan Encrypted

Scan Encrypted Channel feature will always be
ON after performing first time installation.

When this setting is on, search process will
locate the encrypted channels as well. If it is
set as OFF manually, encrypted channels will

” or “ ” buttons. Use

” or “ ” buttons

not be located while in automatic search or
manual search.

“ ” or “ ” button to select Scan Encrypted

Use
and then press “ ” or “ ” button to set this
setting as On or Off.

Receiver Upgrade

Over Air Download (OAD)

To ensure that your TV always has the most
update information, use this setting. Please
ensure that the TV is set to standby mode. The
TV automatically powers up at 3.00 A.M. each
day and searches for any new information which
may be broadcast and will download this to
your receiver automatically. This operation will
normally take approximately 30 minutes. If you
have an important recording to be carried out
at 3.00 A.M. and you do not want to interrupt
it, disable auto OAD search by performing the
following:

• Press “M” button and using the “
buttons to choose Setup and press the OK
button.

• Highlight Confi guration menu with “ ” or “ ”
keys and press OK .

• Use “ ” or “ ” buttons to choose “RECEIVER
UPGRADE” and press OK button.

• Using the“
scanning” from Enabled to Disabled.

• Highlight “Scan for upgrade” menu with “

” or “ ” keys and pres OK to commence

upgrade.

” or “ ” button change “Automatic

” or “ ”

English - 27 -

• After the search progress is completed, the
message “ Completed searching for upgrade.
No new software was found” appears on the
screen if no new software is found.

• Do not forget to re enable the automatic OAD
function after you have made your recording
by repeating the above instructions but this
time selecting ENABLE.

Note: Your TV may start in First Time Installation
mode after OAD update.

Parental Control

Use “ ” or “ ” buttons to go to Parental Lock
option. Press “OK” button to enter the menu.
A dialog box asking for the lock key will be
displayed. The key is set to “0000” initially.
PIN

. If it is incorrect, “Wrong Pin” OSD will be

Enter

displayed. If it is correct, the Parental Control
menu will be displayed:

will be updated after exiting ‘Configuration
Menu’.

Set PIN

” or “ ” buttons to go to “Set PIN” option.

Use “
Press OK to display the “Set PIN” window. Use
numeric buttons to enter new pin number you
will need to input your new pin a second time
for verifi cation purposes. If both pin numbers
are four digits long and the same, the pin will
be changed. The factory default pin number is
0000, if you change the pin number make sure
you write it down and keep it safe.

Maturity Lock

(**) If you set Country option as UK in the fi rst
time installation, Maturity Lock option will not
be visible.

When set, this option gets the maturity information
from the broadcast and if this maturity level is
disabled, does not show video-audio.

Menu Lock

In menu lock you can set locking for all menus,
or the Installation Menu to restrict access to
these menus. If the menu lock is disabled, there
will be free access to the menu system. Use “
or “ ” buttons to go to Menu Lock option. Use “

” or “ ” buttons to choose Menu Lock Mode.

DISABLED : All menus are unlocked.

ALL MENUS : All Menus are accessible only
with the correct lock key. So the user cannot
add, delete, rename, channels, cannot set
timers.

INSTALLATION MENU : Installation menu is
locked.So the user can’t add channels. Changes

English - 28 -

Time Settings

In the configuration menu, highlight the Time
Settings item by pressing “ ” or “ ” buttons.
Press OK and Time Settings sub menu will be
displayed on the screen. Current Time,Time
Zone Setting and Time Zone will be available.

Use “ ” or “ ” buttons to highlight the Time
Zone

Setting. Time Zone Setting is set using

” buttons. It can be set to AUTO or MANUAL.
When AUTO is selected, Current Time and
Time

Zone options will not be available to be set. If
MANUAL option is selected as the Time Zone

Setting, Time Zone can be altered:

• By pressing

Zone.

”

“ ” or “ ” buttons select Time

Use “ ” or “ ” buttons to change the Time Zone
between GMT-12 or GMT+12. Current Time
on the top of the menu list will then change
according to the selected Time Zone.

Audio Description

Audio description refers to an additional
narration track for blind and visually impaired
viewers of visual media, including television and
movies. The description narrator talks through
the presentation, describing what is happening

“ ” or “

on the screen during the natural pauses in
the audio (and sometimes during dialogue, if
deemed necessary). You can use this feature,
only if the broadcaster supports that additional
narration track. Use “ ” or “ ” buttons to select
an item. Then use

“ ” or “ ” buttons to set.

Audio Description

This function enables or disables the audio
description feature by pressing the

“ ” or “

” buttons.

Preferred Language

By pressing the

“ ” or “ ” buttons the preferred

audio description language is being changed.

This setting can be used, only if it is available.

Relative Volume

Using this option, the Audio Description volume
level can be increased or decrased relatively,

according to the general volume.

Standby Search (*)

(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.

“ ” or “ ” button to select Standby Search

Use
and then press “ ” or “ ” button to set this
setting as On or Off. If you change Standby
Search to Off, this function will be unavailable.

To use Standby search please make sure that

you select Standby Search as On.

Language

In this menu the user can adjust the preferred
language. Language is changed by pressing
OK button.

Menu : shows the language of the system

Preferred

These settings will be used if available.
Otherwise the current settings will be used.

• Audio : by pressing “

” or “ ” keys change the

audio language.

• Subtitle : alter the subtitle language with “
” or “ ” keys. The chosen language will be
seen in subtitles.

• Guide : By pressing “ ” or “ ” buttons change
the guide language.

Current

• Audio : if audio language is supported change
the audio language by pressing “

” or “ ”

buttons

• Subtitle : if subtitles are supported, alter the
subtitle language with “ ” or “ ” buttons. The
chosen language will be seen in subtitles.

Note: If the Country option is set to Denmark, Sweden,
Norway or Finland, the Language Settings menu will
function as described below:

Language Settings

In the configuration menu, highlight the
Language Settings item by pressing “ ” or “ ”
buttons. Press OK and Language Settings sub
menu will be displayed on the screen:

Use “ ” or “ ” buttons to highlight the menu
item that will be adjusted and then press “ ” or
“ ” button to set.

Notes:

• System Language determines the on-screen
menu language.

• Audio Language is used for selecting the
soundtrack of a channels.

• Primary settings are the first priority when
multiple choices are available on a broadcast.
Secondary settings are the alternatives when
the first options are not available.

English - 29 -

Installation

The Installation menu is mainly intended to
help you for creating a Channel Table in the
most effi cient way. Select Installation from the
Confi guration menu by pressing “
buttons.

This menu includes the following items:

• Automatic channel scan

• Manual Channel Scan

• Clear Service List (*)

• First Time Installation

(*) For Denmark, Sweden, Norway or Finland.

Automatic Channel Scan

Automatic channel scan is started by pressing
OK button while Automatic channel scan item
is highlighted.

The following message appears on the
screen:

Highlight Yes or No by using “
and press OK button to confi rm.

If Yes is selected, automatic search starts.

Selecting No cancels automatic search.

After search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:

Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:

” or “ ”

” or “ ” buttons

Select your Country , Language and Text
language by using “
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:

After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.

If you do not accept the locations and/or the
programme names, you can change them via
the program table.

Manual Channel Scan

In manual channel scan, the number of the
multiplex is entered manually and only that
multiplex is searched for the channels. For every
valid channel number, signal
quality are shown on the screen.

In both manual and auto search any existing
channel in the database is not re-stored to avoid
redundant duplicates of that channel.

Clear Service List (*)

(*) This setting is visible only when the Country
option is set to Denmark, Sweden, Norway or
Finland.

Use this setting to clear channels stored.

“ ” or “ ” button to select Clear Service

Press
List and then press OK. The following OSD
message will be displayed on the screen:

Are you sure you want to delete all channels?

” or “ ” and “ ” or “ ”

level and signal

English - 30 -

Press OK to cancel.

Select Yes by pressing
press OK to delete all of the channels.

First Time Installation

The user can use this item to load default
settings, which were loaded to the receiver at
the factory.

To install factory settings, highlight “First Time
Installation” menu item and press OK button,
then you will be asked whether or not to delete
the settings. Selecting “Yes” by pressing OK
button while the “Yes” is highlighted will delete
the existing channel table.

Then you will be asked to confi rm for deleting
all channels and settings:

By selecting Yes and pressing the OK button,
the existing channel table will be deleted.

After factory settings are loaded, “First Time
Installation” menu will be displayed.

The menu which is displayed for language
selection appears on the screen at fi rst. By using
“

” or “ ” buttons, select the desired language

option, and press OK button to activate.

“First time installation” OSD will appear on the
screen. By pressing “
the Country you want to set and press OK
button (* only for EU countries).

After the country option is selected, a message
asking for automatic search appears on the
screen:

Press the OK button to start installation. After
search is completed for digital channels, a
message asking whether to search for analogue
channels appears on the screen:

“ ” or “ ” button and

” or “ ” buttons, select

Press the OK button to search for analogue
channels. The following menu appears on the
screen for analogue channel search:

Select your Country , Language and TXT
Language by using “
buttons. Press OK or RED button to continue. To
cancel, press BLUE button. The following menu
will be displayed during the automatic tuning:

After APS is fi nalized, the programme table
will appear on the screen. In the programme
table you will see the programme numbers and
names assigned to the programmes.

If you do not accept the locations and/or the
programme names, you can change them via
the program table.

” or “ ” and “ ” or “ ”

Media Browser

• To display Media Browser window, press
either “ M ” button on the remote control and
then select Media Browser by pressing “ ”
or “ ” button. Press OK button to continue.
Media Browser menu contents (depending
on the contents of your USB drive) will be
displayed.

• Also, when you plug a USB device, the
following screen will be displayed:

English - 31 -

Select YES by pressing “ ” or “ ” button
and press OK button. Media browser will be
displayed.

• You can play

music, picture and video fi les

from a USB memory stick.

Note : If you plug USB stick while in analogue mode,
the TV will automatically switch to digital TV mode.

Note : Some USB compliant devices may not be
supported.

Note : If the USB stick is not recognized after power
off/on or First Time Installation, fi rst, plug the USB
device out and power off/on the TV set. Plug the USB
device in again.

Playing MP3 Files

Play This

Play (Green button) : Plays all media fi les in the
folder starting with the selected one.

Pause

Stop (Red button) : Stop the playing fi le.

Previous/Next (Left/Right buttons) : Jumps to
previous or next fi le to play.

Shuffl e
If shuffle mode is enabled, previous/next
function will also jump to the tracks randomly.

(OK button) : Plays the selected fi le.

(Yellow button) : Pause playing fi le.

(INFO button) : Plays the fi les randomly.

English - 32 -

(Blue button) : Plays the selected fi le

Loop
repeatedly.

Viewing JPG Files

Jump

(Numeric buttons) : jump to selected fi le

using the numeric buttons.

OK : views the selected picture in full screen.

Play / Slideshow

(Green button) : starts the

slideshow with all pictures in the folder.

Slideshow Options

Pause (

Continue (Green button) : Continue with the
slideshow.

Previous/Next (Left/Right buttons) : Jump to
previous or next fi le of slideshow.

Rotate
using up/down buttons.

EXIT : Back to fi le list.

Shuffl e
and continuous in current folder and
turns the highlighted icon. If during a slideshow
the shuffl e mode is enabled, the next pictures
will be choosen randomly (If the loop function is
not enabled, the slideshow will stop at the end. If
the loop function is enabled, after the slideshow
ends, it will start again and again).

Loop : Slideshow goes on continuously and

Info : Activates the operations bar.

Yellow button) : Pause the slideshow.

(Up/Down buttons) : Rotate the picture

(Red button) : Shows the fi les randomly

icon

icon turns the highlighted icon.

Video Playback

Play (Red button) : Starts the video playback.

Stop (Blue button) : Stops the video playback.

Pause (OK button) : Pause the video
playback.

Rewind (Cursor Left) : Goes backward.

Forward (Cursor Right) : Goes forward.

Menu (Menu button) : Sets subtitle/Audio.

• You can set subtitles by using OK button before
starting the playback or by using MENU button
during the playback.

Press EXIT button to switch back to previous
menu.

Note: PIP/PAP mode is not available while in
Media Browser mode.

Navigating the Analogue TV
Menu System

M

For displaying
menu options

INFO

For navigation

To confirm choices

SELECT

OK

• Press “ M ” to display the main menu.

• Press “

” or “ ” button to select an icon.

• Use “ ” or “ ” button to highlight a setting.

• Press “

” or “ ” buttons to change the

settings.

• Press “

” for more options.

• Press OK to store.

• To exit the menu or return from sub-menu
screen, press “ M ”.

Note : These explanations are valid for the navigation
of the analogue TV menu system. To select options
that are explained in the following parts, refer to
“Navigating the Analogue TV Menu System”.

Analogue TV Menu System

Picture Menu

Mode

For your viewing requirements, you can set the
related mode option.

Press “
“ ” or “ ” button to choose from one of these
options: Cinema , Dynamic and Natural .

Brightness/Contrast/Colour/Sharpness

Press “
option. Press “ ” or “ ” button to set the level.

Note : Hue option is only be visible when the TV
receives an NTSC signal.

English - 33 -

” or “ ” button to select Mode . Press

” or “ ” button to select the desired

Colour Temp

Press “
Press “

” or “ ” button to select Colour Temp .
” or “ ” to choose from one of these

options: Cool , Normal and Warm .

Note :

• Setting Cool option gives white colours a slight
blue stress.

• Setting Warm option gives white colours a slight
red stress.

• For normal colours, select Normal option.

Noise Reduction

If the broadcast signal is weak and the picture
is noisy, use Noise Reduction setting to reduce
the amount of noise.

Press “

” or “ ” button to select Noise
Reduction. Press “ ” or “ ” to choose from one
of these options: Low , Medium , High or Off .

Film Mode

Films are recorded at a different number
of frames per second to normal television
programmes.

Press “

” or “ ” button to select Film Mode .

Press “ ” or “ ” button to set this feature On
or Off.

Turn this feature on when you are watching.

fi lms to see the fast motion scenes clearly.

Game Mode

Select Game Mode by pressing “

” or “
” button. Use “ ” or “ ” button to set Game
Mode as On or Off . When Game Mode is set
to On, specific game mode settings, which
are optimized for better video quality, will be
loaded.

Also; Picture Mode, Contrast, Brightness,
Sharpness, Colour and Colour Temp settings
will be invisible and disabled while Game Mode
is on.

Note :

Picture mode selection button on the remote control
will have no function while Game Mode is on.

If the TV is switched to PIP/PAP mode, Game Mode
setting will be disabled and be removed from the
Picture menu.

Picture Zoom

Select Picture Zoom by pressing “

” or “

” button.

Use “

” or “ ” buttons, to change picture zoom
to Auto , 16:9 , 4:3 , Panoramic , 14:9 , Cinema ,
Subtitle or Zoom .

Reset

Press “

” or “ ” button to select Reset . Press
“ ” or “ ” or OK button to reset the picture
modes to factory default settings.

Store

Press “ ” or “ ” button to select Store. Press “

” or OK button to store the settings. “ Stored... ”

will be displayed on the screen.

Sound Menu

Volume

Press “
Press “ ” or “ ” button to change the level of
the Volume.

Equalizer

Press “
Press “ ” button to view equalizer menu.

” or “ ” button to select Volume .

” or “ ” button to select Equalizer .

English - 34 -

Press “ ” or “ ” button to change the preset.
In equalizer menu, the preset can be changed
to Music , Movie , Speech , Flat , Classic and
User .

Select the desired frequency by pressing “
” or “ ” button and increase or decrease the
frequency gain by pressing “

” or “ ” button.

Press the “ M ” button to return to the previous
menu.

Note : Equalizer menu settings can be changed only
when the Equalizer Mode is in User .

Balance

This setting is used for emphasizing left or right
speaker balance.

Press “ ” or “ ” button to select Balance.
Press “ ” or “ ” button to change the level of
the balance. Balance level can be adjusted
between -32 and + 32.

Headphone

Press “ ” or “ ” button to select Headphone .
Press “ ” button to view the headphone
menu.

Headphone sub-menu options are described
below:

Volume

Press “

” or “ ” button to select Volume . Press
“ ” button to increase headphone volume
level. Press “ ” button to decrease headphone
volume level. Headphone volume level can be
adjusted between 0 and 63 .

Store

Press “

” or “ ” button to select Store. Press “

” or OK button to store the settings. “ Stored... ”

will be displayed on the screen.

Sound Mode

Press “

” or “ ” button to select Sound Mode .
Using “ ” or “ ” button, you can select Mono,
Stereo, Dual I or Dual II mode, only if the
selected channel supports that mode.

AVL

Automatic Volume Limiting (AVL) function
adjusts the sound to obtain fi xed output level
between programmes (For instance, volume
level of advertisements tend to be louder than
programmes).

Press “

” or “ ” button to select AVL . Press “ ”

or “ ” button to set the AVL as On or Off .

English - 35 -

Spdif Out

Press “
Press “

” or “ ” button to select Spdif Out .

” or “ ” button to set the Spdif Out .

as On or Off .

Note : If Spdif Out is set to On, headphone will be
disabled.

Store

Press “

” or “ ” button to select Store. Press “

” or OK button to store the settings. “ Stored... ”

will be displayed on the screen.

Feature Menu

Pip-Pap

In the Feature menu, highlight PIP item by
pressing “
to enter PIP submenu:

Using “
PAP mode or turn off the feature.

If the TV is switched to PIP or PAP mode,
Pip-Pap submenu will change accordingly and

” or “ ” buttons. Press “ ” button

” or “ ” button, you can switch to PIP,

the following settings will appear on the same
menu screen.

Note that if you switch to PAP mode by using Pip-Pap
setting, only Source and Swap options will be active
among the menu settings.

Pip-Pap

This line controls Pip/Pap modes. Use “

” or “ ”

buttons to switch the TV to Pip , Pap or Off .

Pip Size

Using this setting, you can set the size of the
Pip window. Press “

” or “ ” button to highlight
Pip Size item. Use “ ” or “ ” button to set Pip
Size to Small or Large.

Note : This setting will be inactive if the TV is set to
Pap mode.

PIP Position

This setting is used for moving the sub
picture.

Select PIP Position item by using “

” or
“ ” button. Use “ ” or “ ” button to adjust PIP
position.

Positions available are: Bottom Right,Bottom
Left, Top Left and Top Right.

Source

PIP Source setting enables you to select the
source of the sub picture.

Select PIP Source item by using “

” or “
” button. Use “ ” or “ ” button to set PIP
source.

Program

This setting will be unavailable to be used.

Swap

Select Swap item by using “

” or “ ” button.
Use “ ” or “ ” button to set. This function
enables to swap between the main and the
PIP picture.

Note : See Appendix E for all PIP/PAP modes.

Sleep Timer

Press “ ” or “ ” button to select Sleep Timer .

” or “ ” button to set the Sleep Timer.

Use “

The timer can be programmed between Off and
120 minutes in steps of 10 minutes.

If Sleep Timer is activated, at the end of the
selected time, the TV goes automatically to
standby mode.

Child Lock

Press “

Use “

” or “ ” button to select Child Lock .

” or “ ” button to set the Child Lock On
or Off . When On is selected, the TV can only
be controlled by the remote control handset. In
this case the control panel buttons (except for
the STANDBY button) will not work.

Hence, if one of those buttons is pressed, Child
Lock On will be displayed on the screen when
the menu screen is not visible.

Language

Press “

” or “ ” button to select Language .

Use “ ” or “ ” button to select the Language .

Default Zoom

While zoom mode is set as AUTO , the TV will
set the zoom mode in accordance with the
signal of the broadcast. If there is no WSS or
aspect ratio information, the TV will then use this
setting to adopt. Press “ ” or “ ” button to select
Default Zoom . You can set Default Zoom to
Panoramic , 16:9 , 4:3 or 14:9 by pressing “
” or “ ” button.

Blue Background

If the signal is weak or absent, the TV will
automatically change to a blue screen. To
enable this, set Blue Background to On .

By pressing “

” or “ ” button, select Blue
Background . Press “ ” or “ ” button to set
Blue Background as On or Off .

Menu Background

Press “

” or “ ” button to select Menu
Background . You can set menu background
level by pressing “ ” or “ ” button.

Backlight

This setting controls the backlight level. Select
Backlight by pressing “

” or “ ” button. Press“

” or “ ” button to set Backlight to Medium ,

Maximum, Minimum or Auto.

Menu Timeout

To set a specific display timeout for menu
screens, set a value for this option.

Press “

” or “ ” button to select Menu Timeout .
Use “ ” or “ ” button to change menu timeout
to 15 sec , 30 sec or 60 sec .

English - 36 -

Teletext Language

Press “
Language . Use “

” or “ ” button to select Teletext

” or “ ” button to change
Teletext Language to West, East , Turk/Gre ,
Cyrillic, Arabic or Persian. .

Antenna Power (optional)

When antenna power option is set as On, +5V
will be transmitted to the antenna output.

This feature enables the use of active
antennas.

Note : Antenna power should be “Off” when standard
antenna is used instead of the active antenna.

Ext Out

Press “ ” or “ ” button to select Ext Out. Use “
” or “ ” button to set the Ext Out as On or Off.

Note :

For copying from a DVD or VCR device, you should
choose desired source from source menu and turn
“On” to EXT Out from feature menu.

Install Menu

Colour System

Press “
Use “

” or “ ” button to select Colour System.

” or “ ” button to change the colour
system to PAL,SECAM,PAL60,AUTO,NTSC
4,43 or NTSC 3,58.

Sound System

Press “

” or “ ” button to select Sound System.
Press “ ” or “ ” button to change the sound
system to BG,DK, I, L or L’.

Fine Tune

Press “
Press “

” or “ ” button to select Fine Tune.

” or “ ” button to adjust the tuning.

Search

Press “ ” or “ ” button to select Search. Use “

” or “ ” button to start programme searching.
You can also enter the desired frequency
using the numeric buttons while Search item
is highlighted.

Store

Press “

” or “ ” button to select Store. Press “

” or OK button to store the settings. “ Stored... ”
will be displayed on the screen.

Install Menu in AV Modes

The following screen appears in the install menu
when the TV is in AV modes. Note that limited
options will be available. Switch to TV mode for
viewing complete version of the Install menu.

Program

Press “

” or “ ” button to select Program. Use
“ ” or “ ” button to select the program number.
You can also enter a number using the numeric
buttons on the remote control. There are 200
programme storage between 0 and 199.

Band

Band can be selected either C or S. Press “
or “ ” button to set Band.

Channel

Channel can be changed by “

” or “ ” button

or numeric buttons.

English - 37 -

Colour System

”

Press “

” or “ ” button to select Colour
System . Use “ ” or “ ” button to change the
colour system to PAL , SECAM , PAL 6 0 or
AUTO .

Store

Press “
Program . Press “

” or “ ” button to select Store

” or OK button to store the
settings. “ Stored... ” will be displayed on the
screen.

Program Table

Select Program Table by pressing “ ” or “
” button.

programme list, and the following programmes
shift one line up.

APS (Auto Programming System)

When you press the BLUE button to start
automatic tuning, Auto Programming System
menu will appear on the screen:

By moving the cursor in four directions you can
reach 20 programmes in the same page. You
can scroll the pages up or down by pressing the
navigation buttons to see all the programmes
in TV mode (except for the AV modes). By
cursor action, programme selection is done
automatically.

Name

To change the name of a programme, select the
programme and press the RED button.

The fi rst letter of the selected name will be
highlighted. Press “

” or “ ” button to change
that letter and “ ” or “ ” button to select the
other letters. By pressing the RED button, you
can store the name.

NB. You can also use the alpha-numeric buttons on
the remote control to change the name.

Move

Select the programme which you want to insert
by navigation buttons. Press the GREEN
button. By navigation buttons move the selected
programme to the decided programme space
and press the GREEN button again.

Delete

To delete a programme, press the YELLOW
button. Pressing the YELLOW button again
erases the selected programme from the

Country

Press

“ ” or “ ” button to select your country.
If you want to exit from A.P.S. function, press
the BLUE button.

When you press OK or RED button to start
automatic tuning, all stored programmes will
be erased and the TV will search for available
channels. During the search, the following OSD
will be displayed:

Whenever you press the BLUE button, APS
function stops and Program Table appears on
the screen.

If you wait until the end of APS, Program Table
will be displayed with the programmes found
and located.

English - 38 -

Source Menu

Press “ ” or “ ” button and select the sixth icon.
Then press “ ” or OK button. Source menu
appears on the screen:

PC Mode Menu System

See “Connecting the LCD TV to a PC” section
for connecting a PC to the TV set.

For switching to PC source, press “
on your remote control and select PC input.
You can also use “Source” menu to switch to
PC mode.

Note that PC mode menu settings are available only
while the TV is in PC source.

PC Position Menu

Press MENU button.

Select the first icon by pressing “ ” or

” button. PC Position menu appears on the

“
screen:

” button

In source menu, highlight a source by pressing
“

” or “ ” button and switch to that mode
by pressing “ ” button. Source options are;
TV , DTV/USB , EXT-1 , EXT-2 , EXT-2S FAV ,
HDMI-1 , HDMI-2 , YPbPr or PC-VGA .

Note : Once you have connected optional equipment
systems to your TV, you should select the required
input to view pictures from that source.

Autoposition

If you shift the picture horizontally or vertically
to an unwanted position, use this item to put
the picture into correct place automatically.
This setting therefore automatically optimizes
the display.

Select Autoposition item by using “
buttons. Press OK or “ ”, “ ” button.

Warning : Please ensure auto adjustment is
performed with a full screen image to ensure
best results.

H (Horizontal) Position

This item shifts the image horizontally to right
hand side or left hand side of the screen.

Select H Position item by using “
” button. Use “ ” or “ ” button to adjust the
value.

V (Vertical) Position

This item shifts the image vertically towards the
top or bottom of the screen.

” or “ ”

” or “

English - 39 -

Select V Position item by using “ ” or “
” button. Use “ ” or “ ” button to adjust the
value.

Phase

Depending on the resolution and scan frequency
that you input to the TV set, you may see a hazy
or noisy picture on the screen. In such a case
you can use this item to get a clear picture by
trial and error method.

Select Phase item by using “
Use “

” or “ ” button to adjust the value.

Dot Clock

Dot Clock adjustments correct the interference
that appear as vertical banding in dot intensive
presentations like spreadsheets or paragraphs
or text in smaller fonts.

Select Dot Clock item by using “
” buttons. Use “ ” or “ ” button to adjust the
value.

PC Picture Menu

For adjusting PC picture items, do the
following:

Press the “M” button.

Press “
PC Picture menu appears on the screen.

Brightness, Contrast, Colour and Colour
Temperature settings in this menu are identical

to settings defi ned in TV picture menu under
“Analogue TV Menu System”.

Note : If you set Colour Temp as User, you can defi ne
R, G, B settings manually.

Sound Menu

The items in this menu are described at “Sound
Menu” section explained in “Menu System”.

Feature Menu

Feature menu settings are identical to the
settings explained in “ Feature Menu ” section
in “ Menu System ”.

Source Menu

Source menu settings are identical to the
settings explained in “ Source Menu ” section
in “ Menu System ”.

” or “ ” button to select the second icon.

” or “ ” buttons.

” or “

Displaying TV Information

Programme Number , Programme Name ,
Sound Indicator and Zoom Mode information is
displayed on the screen when a new programme
is entered or “INFO” button is pressed.

Mute Function

Press “ ” button to disable sound. Mute
indicator will be displayed in the upper side of
the screen.

To cancel mute, there are two alternatives; the
fi rst one is pressing the “ ” button and the
second one is increasing the volume level.

PIP (Picture-in-Picture) and
PAP (Picture-and-Picture)
Modes

Press the “ ” button to switch to PIP mode.

In PIP Mode, a small picture (PIP picture) is
displayed on the main picture. There is 1 size
and 4 positions (upper left, upper right, bottom
left and bottom right) available for the PIP
window. You can use “ ” button to change the
PIP position. Aspect Ratio of the PIP window is
fi xed and 4:3.

When PIP Mode is entered, the default active
window is the PIP window and the active window
is indicated by a red frame around it. The active
window can be changed by pressing “
” button. The status info OSD belongs to active
window. The place of the status OSDs are same
for both windows.

Press the “ ” button again to exit the PIP
mode.

Press the “ ” button to switch to PAP mode.

In PAP Mode, two pictures with equal sizes are
displayed on the screen. Aspect Ratios of the
windows are fi xed.

When you switch to PAP Mode, main window in
PAP Mode will be displayed on the right side of
the screen. The active window can be changed
by pressing “

Press the “ ” button again to exit the PAP
mode.

” or “ ” button.

” or “

English - 40 -

Picture Mode Selection

By pressing PP button, you can change Picture
Mode settings in accordance with your viewing

requirements. Available options are Dynamic,
Natural and Cinema.

Note : This function will not be available while in PC
mode.

Freezing Picture

You can freeze the picture on the screen by
pressing the “ OK ” button on the remote control.
Press the “ OK ” button to freeze picture. Press
again to quit freeze mode.

Zoom Modes

You can change the aspect ratio (image size)
of the TV for viewing the picture in different
zoom modes.

Press “ ” button to directly change the
zoom mode.

Available zoom modes are listed below.

Note:

In YPbPr and HDMI modes, while in 720p-1080i
resolutions, only 16:9 mode is available.

In PC mode, only 16:9 mode is available.

Auto

When a WSS (Wide Screen Signalling) signal,
which shows the aspect ratio of the picture, is
included in the broadcast signal or the signal
from an external device, the TV automatically
changes the ZOOM mode according to the
WSS signal.

• When the AUTO mode does not function

correctly due to poor WSS signal quality or
when you want to change the ZOOM mode,
change to another ZOOM mode manually.

16:9

This uniformly stretches the left and right sides
of a normal picture (4:3 aspect ratio) to fi ll the
wide TV screen.

• For 16:9 aspect ratio pictures that have been

squeezed into a normal picture (4:3 aspect
ratio), use the 16:9 mode to restore the picture
to its original shape.

4:3

Use to view a normal picture (4:3 aspect ratio)
as this is its original size.

Panoramic

This stretches the left and right sides of a normal
picture (4:3 aspect ratio) to fill the screen,
without making the picture appear unnatural.

The top and bottom of the picture are slightly
cut off.

14:9

This zooms up the wide picture (14:9 aspect
ratio) to the upper and lower limits of the
screen.

Cinema

This zooms up the wide picture (16:9 aspect
ratio) to the full screen.

Subtitle

This zooms up the wide picture (16:9 aspect
ratio) with subtitles to the full screen.

Zoom

This option zooms to the picture.

English - 41 -

Note: You can shift to screen up or down by pressing

” / “ ” buttons while picture zoom is selected as

“
Auto, Panoramic, 14:9, Cinema, Subtitle or Zoom.

Teletext

Teletext system transmits information such as
news, sports and weather on your TV. Note
that if the signal degrades, for example in
poor/adverse weather conditions, some text
errors may occur or the teletext mode may be
aborted.

Teletext function buttons are listed below:

” Teletext On-Off / PAT Mode

“

Activates teletext mode when pressed once.
Pressing this button again will split the screen
into two windows, one displaying the teletext
and the other displaying the current channel.
Pressing again will quit the teletext mode.

“ ” Index

Selects the teletext index page.

” Mix

“

Places the teletext screen over the
programme.

“

” Expand

Press once to enlarge top half of the page, press
again to enlarge the bottom half of the page.
Press again to revert back to normal size.

” Reveal

“

Shows hidden information (e.g. solutions of
games).

“ ” Hold

Holds a text page when convenient. Press again
to resume.

” Subcode Pages / Time

“

Selects subcode pages if available when the
teletext is activated. When the teletext is not
activated, displays time info if the programme
has teletext transmission.

P+ / P- and numbers (0-9)

Press to select a page.

Note : Most TV stations use code 100 for their index
pages.

Coloured Buttons

(RED/GREEN/YELLOW/BLUE)

Your TV supports both FASTEXT and TOP text
systems. When these systems are available, the
pages are divided into groups or topics.

When FASTEXT system is available, sections in
a teletext page will become colour-coded and can
be selected by pressing the coloured buttons.
Press a coloured button that corresponds to
with your needs.

The coloured writings will appear, showing you
which coloured buttons to use when TOP text
transmission is present. Pressing P - or P +
commands will request the next or previous
page respec tively.

English - 42 -

Tips

Screen Care

Clean the screen with a slightly damp, soft
cloth. Do not use abrasive solvents as they may
damage the coating layer of the TV screen.

For your safety, unplug the mains plug when
cleaning the set. When moving the TV, support
it from the base.

Image Persistence

Please note that ghosting may occur while
displaying a persistent image. LCD TVs’ image
persistence may disappear after a short time.
Try turning off the TV for a while.

To avoid this, do not leave a
screen for extended periods.

No Power

If your TV system has no power, please check
the main power cable and connection to the
mains socket outlet.

Poor Picture

Have you selected the correct TV system? Is
your TV set or house aerial located too close
to a non-earthed audio equipment or neon
lights, etc.?

Mountains or high buildings can cause double
pictures or ghost images. Sometimes you can
improve the picture quality by changing the
direction of the aerial.

Is the picture or teletext unrecognisable? Check
if you have entered the correct frequency.
Please retune the channels.

The picture quality may degrade when two
peripherals are connected to the TV at the
same time. In such a case, disconnect one of
the peripherals.

No Picture

Is the aerial connected properly? Are the plugs
connected tightly to the aerial socket? Is the
aerial cable damaged? Are suitable plugs used
to connect the aerial? If you are in doubt, consult
your dealer.

No Picture means that your TV is not receiving
a transmission. Have you selected the correct
button on the remote control? Try once more.

Also make sure the correct input source has
been selected.

still picture on the

English - 43 -

Sound

You can not hear any sound. Did you perhaps
interrupt the sound, pressing the button?

Sound is coming from only one of the speakers.
Is the balance set to one extreme? See Sound

Menu .

Remote Control

Your TV no longer responds to the remote
control. Perhaps the batteries are exhausted.
If so you can still use the local buttons at the
side of the TV.

Input Sources

If you cannot select an input source, it is possible
that no device is connected.

Check the AV cables and connections if you
have tried to connect a device.

Appendix A: PC Input Typical Display Modes

The display has a maximum resolution of 1920 x 1200 . The following table is an illustration of
some of the typical video display modes.

Your TV may not support different resolutions. Supported resolution modes are listed below.

If you switch your PC to an unsupported mode, a warning OSD will appear on the screen.

Note: Resolution modes indicated with (*) are not available for PIP/PAP modes.

Index

10 640 480 85 43.3 VESA 16:9, 4:3

11 800 600 56 35.2 VESA 16:9, 4:3

12 800 600 60 37.9 VESA 16:9, 4:3

13 800 600 70 43.8 16:9, 4:3

14 800 600 72 48.1 VESA 16:9, 4:3

15 800 600 75 46.9 VESA 16:9, 4:3

16 800 600 85 53.7 VESA 16:9, 4:3

17 832 624 75 49.7 MAC 16:9, 4:3

18 1024 768 43 35.5

19 1024 768 60 48.4 VESA 16:9, 4:3

20

21

22

23

24 1152 864 60 53.8 16:9, 4:3

25

26

27

28

29 1280 768 60 47.7 VESA 16:9, 4:3

30 1360 768 60 47.7 16:9, 4:3

31

32 1280 960 60 60.0 VESA 16:9, 4:3

33

34

35 1280 1024 60 64.0 VESA 16:9

36

37

38 1400 1050 60 65.3 16:9

39

40 1440 900 60 55.9 16:9

41

42

43 1680 1050 60 65.3 16:9

44

Resolution Frequency

Hor Ver Ver (Hz)

1 640 350 85 37.9 VESA 16:9, 4:3

3 640 400 85 37.9 VESA 16:9, 4:3

4 640 400 70 31-May IBM VGA 16:9, 4:3

6 640 480 60 31-May VESA 16:9, 4:3

7 640 480 66 35.0 MAC 16:9, 4:3

8 640 480 72 37.9 VESA 16:9, 4:3

9 640 480 75 37.5 VESA 16:9, 4:3

* 1024 768 70 56.5 VESA 16:9, 4:3

* 1024 768 72 57.7 16:9, 4:3

* 1024 768 75 60.0 16:9, 4:3

* 1024 768 85 68.3 16:9, 4:3

* 1152 864 70 64.2 VESA 16:9, 4:3

* 1152 864 75 67.5 VESA 16:9, 4:3

* 1152 864 85 77.1 VESA 16:9, 4:3

* 1152 870 75 68.9 MAC 16:9, 4:3

* 1280 768 75 60.2 VESA 16:9, 4:3

* 1280 960 75 75.0 VESA 16:9, 4:3

* 1280 960 85 85.9 VESA 16:9, 4:3

* 1280 1024 75 80.0 VESA 16:9

* 1280 1024 85 91.1 VESA 16:9

* 1400 1050 75 82.3 16:9

* 1440 900 75 70.6 16:9

* 1600 1200 60 75.0 VESA 16:9

* 1920 1200 60 74.5 16:9

Hor

(KHz)

Standard

VESA

(interlace)

Supported

Zoom Modes

16:9, 4:3

English - 44 -

Appendix B: AV and HDMI Signal Compatibility (Input Signal
Types)

Source Supported Signals Available

PAL 50/60 O

EXT-1

(SCART 1)

EXT-2

(SCART-2)

FAV

YPbPr

HDMI1
HDMI2

(X: Not Available, O: Available)

Note : In some cases a signal on the LCD TV may not be displayed properly. The problem may
be an inconsistency with standards from the source equipment (DVD, Set-top box, etc.). If you do
expereince such a problem please contact your dealer and also the manufacturer of the source
equipment.

NTSC 60 O

RGB 50 O

RGB 60 O

PAL 50/60 O

NTSC 60 O

RGB 50 X

RGB 60 X

S-VHS 50 O

S-VHS 60 O

PAL 50/60 O

NTSC 60 O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

480I 60Hz O

480P 60Hz O

576I 50Hz O

576P 50Hz O

720P 50Hz O

720P 60Hz O

1080I 50Hz O

1080I 60Hz O

1080P 50Hz O

1080P 60Hz O

1080P 24 HZ O

English - 45 -

Appendix C : Pin Specifi cations

SCART connector pin specifi cations

Pin Input signal Pin Input signal

1 AUDIO OUT (RIGHT) 12

2 AUDIO IN (RIGHT) 13

3 AUDIO OUT (LEFT/MONO) 14

4 AUDIO GND 15

5 RGB-B GND 16

6 AUDIO IN (LEFT/MONO) 17

7 RGB-B IN 18

8 AUDIO / RGB SWITCH / 16:9 19

9 RGB-G GND 20

COMPOSITE VIDEO / S.VHS LUMINANCE IN

10 Not used 21

11

RGB-G IN

HDMI connector pin specifi cations

Pin Input signal Pin

1 TMDS Data2+ 11 TMDS Clock Shield

2

TMDS Data2 Shield 12 TMDS Clock-

3

TMDS Data 2- 13 CEC

4

TMDS Data 1+ 14 Reserved (N.C. on device)

5

TMDS Data1 Shield 15 SCL

6

TMDS Data1- 16 SDA

7

TMDS Data0+ 17 DDC/CED Ground

8

TMDS Data0 Shield 18 +5V Power

9

TMDS Data0- 19 Hot Plug Detect

10

TMDS Clock+

Input signal

Signal Input

PC RGB Terminal (D-sub 15-pin connector)

Pin Input signal

1

2

3

4

5

6

7

8

9

10

11

12

13

H.sync or H/V composite sync

14

15

R

G or sync on green

B
No connection
No connection

R.GND
G.GND

B.GND

No connection

GND

No connection

[SDA]

V.sync. [V.CLK]

[SCL]

Not used

RGB-R GND

GND

RGB-R / S.VHS CHROMINANCE IN

BLANKING SIGNAL

COMPOSITE VIDEO GND

BLANKING SIGNAL GND

COMPOSITE VIDEO OUT

GND / SHIELD (CHASSIS)

English - 46 -

Appendix E: PIP/PAP Mode Combinations

MAIN

TV

DTV/

USB

Scart1

Scart2

Scart2S

FAV

HDMI1

DTV/

TV

88

Scart1 Scart2 Scart2S FAV HDMI1 HDMI2 YPbPr

USB

9

(RGB)

8 8 89999

8 899 9 99999
9

(RGB)

98

89

89

89

(RGB)

(RGB)

(RGB)

9

(RGB)9(RGB)9(RGB)

9

8 8 89999

9

8 8 89999

9

8 8 89999

9999 9 98 8 99

PC-

VGA

9999

HDMI2

YPbPr

PC-

VGA

9999 9 98 8 99

9999 9 9998 9

9999 9 99998

( RGB ): This indicates that, selection is possible only if Scart-1 has a RGB signal.

Restrictions : Scart-1 source must have RGB signal to perform PIP\PAP with sources TV, Scart-2,
Scart-2 S, FAV.

If these sources are set to main window, and Scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to the Scart-1 source.

If scart-1 source is set to main window, and scart-1 does not have a RGB signal, Pip\Pap source
can not be switched to TV, Scart-2,

Scart-2 S and FAV sources.

English - 47 -

Appendix D: Supported File Formats for USB Mode

Media

Music

Photo

File

Extension

- - PCM Sample Rate: 8K ~ 48KHz

.mp3 -

.wma - WMA

.jpg

.gif GIF WxH = 14592x12288, Up to 179 Mega-pixel

.bmp bit map WxH = 14592x12288, Up to 179 Mega-pixel

Video Audio

Baseline

JPEG

Progressive

JPEG

Format

MPEG 1/2

Layer 1/ 2/

(Maximum resolution/Bit rate etc.)

Sample Rate: 8K ~ 48KHz, Bit Rate:

3 (MP3)

Sample Rate: 8K ~ 48KHz, Bit Rate: 5K ~

WxH = 14592x12288, Up to 179 Mega-pixel

Support format: 444/ 440/ 422/ 420/ Grayscale

Support format: 444/ 440/ 422/ 420/ Grayscale

Remarks

32K~320Kbps

192Kbps

Up to 4 Mega-pixel

English - 48 -

Specifi cations

TV BROADCASTING

PAL/SECAM B/G D/K K’ I/I’ L/L’

RECEIVING CHANNELS

VHF (BAND I/III)

UHF (BAND U)

HYPERBAND

MHEG-5 ENGINE compliant with ISO/IEC 13522-5 UK engine Profi le 1

Object carousel support compliant with ISO/IEC 135818-6 and UK DTT profi le

Frequency range: 474-850 MHz for UK models

Digital

Reception

NUMBER OF PRESET CHANNELS

200

CHANNEL INDICATOR

On Screen Display

RF AERIAL INPUT

75 Ohm (unbalanced)

OPERATING VOLTAGE

220-240V AC, 50 Hz.

AUDIO

German + Nicam Stereo

AUDIO OUTPUT POWER (W

2 x 8

POWER CONSUMPTION (W)

150 W (max)

< 1 W (Standby)

PANEL

32” Wide Screen

DIMENSIONS (mm)

DxLxH (With foot):

212 x 776 x 567

Weight (Kg): 12.30

DxLxH (Without foot):

94 x 776 x 524

Weight (Kg): 11.6

Demodulation: COFDM with 2K/8K FFT mode

) (10% THD)

RMS.

170-862 MHz for EU models

Transmission standard: DVB-T. MPEG-2

FEC: all DVB modes

Video: MP@ML, PAL, 4:3/16:9

Audio: MPEG Layer I&II 32/44.148kHz.

for UK

English - 49 -

UK Guarantee

Your Guarantee of Excellence

Thank you for purchasing this Hitachi Television.

In the unlikely event that this product should develop a fault, we undertake to replace or repair
any part of the product which fails due to a manufacturing defect within 12 months of the date of
purchase provided that:

i) The product has been installed and used only in accordance with the instructions supplied with
the product

ii) The product has not been repaired, maintained, or modifi ed by any person other than an Hitachi
authorised engineer

iii) The product serial number has not been removed or altered

This guarantee does not apply to product acquired second hand or for commercial or communal
use

This guarantee does not cover the replacement of exhausted batteries, the adjustment of user
controls, or aerial alignment.

Any parts replaced under this guarantee shall become the property of Hitachi Europe Ltd.

Please note that evidence of the date of purchase will be required before any service under this
guarantee is carried out.

THIS GUARANTEE DOES NOT AFFECT YOUR STATUTORY RIGHTS.

IN ALL CASES OF DIFFICULTY PLEASE CONSULT YOUR HITACHI DEALER

English - 50 -

QUICK GUIDE

L32HP03U

IMPORT ANT - If placing TV into cabinet or alcove, ensure there is at least a 100mm (10cm) gap to the sides,
rear and top of the TV. T his is to allow for adequate ventilation during operation. Please read the
main Users Guide for more safety information before installation.

insert the ba tteries into y our handset

Rear view

either connect the aerial str aight to y our TV ...

5Vdc 60mA

wall

Aerial (RF)

Lead

socket

Aerial (RF) Socket

...or connect the aerial thr ough a V CR...

Aerial (RF) Socket

Aerial (RF) Socket VCR

Optional Scart Lead
TV to VCR

(RF) connector

wall

Aerial (RF)

socket

Lead

• It is r ecommended t hat a scart lead s hould be f itted b etween y our TV and VCR to e nhance y our picture and s ound
quality. Scart leads are essential if you have a stereo TV and VCR and wish to obtain stereo sound from your
equipment. These l eads can be p urchased from y our H itachi dealer or any g ood High S treet electrical retailer.

lead VCR to TV

ANT.IN

AV-1

AV-2

5Vdc 60mA

VCR

...or thr ough a HDMI and YP BPR pr oducts (D VD-RW)

TFT-LCD TV

5Vdc 60mA

Aerial (RF) Socket

• Scart Lead to

(RF) connector

AV on TV .-1

lead Device to TV

COMPONENT

wall

ANTENNA

Aerial (RF)

socket

ANT.IN

Lead

• High Definition

Your LCD T elevision is capable of displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Device.These devices must be connected via the HDMI socket or Component Socket.

Y

PB

HDMI OUT

PR

DVD RECORDER

...or thr ough a VCR and sa tellite decoder .

TFT-LCD TV

5Vdc 60mA

RF Lead from
VCR to TV

RF Lead
from VCR to
Satellite

Aerial

ANT.IN

RF Lead to
Aerial

ANT.IN

• Scart Lead to
AV on TV .-1

TV VCR

AV-1

AV-2

Satellite LNB lead

VCR

connect the TV plug to the mains soc ket

UK plug

insert plug...

...and switch on

European
plug

insert plug...

switch y our TV on
by setting the on/of f button to position | .

SIDE
VIEW

NB: When the set is first switched on, the set will be in standby

on the front of the set will illuminate red Press Operate/Standby or

. channel

up down (P- , P+) or numeric buttons (1, 2, 3, ...) to operate.

basic functions of remote control

and the indicator

To enter the main menu

Volume Down

SELECT

OK

ABC

1

JKL MNO

4

STU

7

PP

SWAP

P<P

WIDE

I-II

RC 1050

M

DEF GHI

2

5

VWX

8

0

P+

P -

DTV

TV

/

Operate/Standby

For navigation of the menus

INFO

3

PQR

6

YZ

9

To sele ct a p rogramme

-/--

number.

EXIT

Programme Up

Volume Up

+

Programme Dow n

SOURCE

AV

/

GUIDE

start A.P .S. (A uto Pr og ramming System)

1

When the TV is turned on for the first time, the menu for the language selection
appears on the scr een. The messag e “Welcome please sel ect your
language!” is written in all language options sequentially in the menu on the
screen. By pressing
press OK. After then, First time Installation Menu will appear on screen. By

or

|}

pressing

or buttons highlight the language you want to set and

b uttons, select country it em you want to set and press OK b utton.

2

After the First Time Installation is set, the following message appears on the

Do you want to start an automatic channel scan?

screen.
To start automatic search, select “ Ye s”, to cancel select “No”. This process will
take about five minutes. To cancel searching, you can press “ MENU” button at
any time during the process.

3

After Automatic Search process is completed, a message asking for
analogue channel search appears on the screen. To continue Auto Program,
first set the language, country and teletext language by using or button and
then press the RED or OK button

|}

4

After APS is finalized, the programme table will appear on the screen. In the
programme list you will see the programme numbers and names assign ed to
the programmes.

5

For details, please refer to the Install Menu section of the instruction book.

important note.

Once the TV has found all your local stations, they are then automatically
assigned a programme numbera nd name, if available from the broadcast.

50139932

Hita chi Ltd.

Shin -Otemachi Bldg 5f, 2-1, Otemachi 2 -Chome,

Cons umer Business Group

Chiy oda-Ku, Tokyo 100

-000 4 Japan

HITACHI EUROPE LTD.
Consumer Affairs Department
PO Box 3007
Maidenhead
Berkshire SL6 8ZE
UNIT ED KINGDOM
Tel: [phone]

[e-mail]

Email:

HITACHI EUROPE Gm bH
Am Seestern 18
40547 Düsseldorf
GERM ANY
Tel: [phone]
Fax: [phone]
Hotline: 0180 - 551 25 51 (12ct/min.)

[e-mail]

Email:

HITACHI EUROPE S. r.l.
Via T. Gulli, 39
20147 MILANO

ITALY

HITACHI EUROPE S. A.S

Digital Media Group
Cité Internationale

94 Quai Charles de Gaulle,
69463 LYON cedex 06
FRAN CE
Tel: [phone]
Fax: [phone]
Email:

[e-mail]

HITACHI EUROPE S. A.
364, Kifissias Ave. & 1, Delfon Str.
152 33 Chalandri
Athens
GREE CE
Tel: [phone]
Fax: [phone]

[e-mail]

Email:

HITACHI EUROPE S. A.
Gran Via Carles III, 86 Planta 5ª
Edificios Trade - Torre Este
08028 Barcelona

SPAIN

HITACHI EUROPE AB
Frösundaviks Alle 15
169 29 Solna
SWED EN

HITACHI EUROPE AB
Egebækvej 98
2850 Nærum
DENM ARK
Tel: [phone]
Fax: [phone]

[e-mail]

Email:

HITACHI EUROPE LTD.
Kodanska 46
101 00 Praha 10
CZEC H REPUBLIC
Tel : [phone]
Fax: [phone]
Email : [e-mail]

HITACHI EUROPE AB
Lars Sonckin kaari 16
FIN-02600 ESPOO
FINL AND
Tel: [phone]
Fax: [phone]
Email:

[e-mail]

www .hitachidigitalmedia.com

50136536