Hitachi L32HC04U User Manual

32” LCD Colour Television

Instructions for use

L32HC04U

Contents
Accessories ............................................................	2
Features .................................................................	2
Preparation.............................................................	2
Safety Precautions .................................................	2
Power Source .....................................................	3
Power Cord.........................................................	3
Warning ..............................................................	3
Disconnecting the Device ...................................	3
Moisture and Water ............................................	3
Cleaning..............................................................	4
Heat and Flames ................................................	4
Lightning .............................................................	4
Replacement Parts .............................................	4
Servicing.............................................................	4
Waste Disposal...................................................	4
Information for Users in European Union
Countries ............................................................	4
Headphone Volume ............................................	4
Installation...........................................................	4
LCD Screen ........................................................	4
Environmental Information .....................................	5
Overview of the Remote Control ............................	6
LCD TV and Operating Buttons..............................	7
Viewing the ConnectionsBack Connectors ..........	7
Viewing the Connections - Side Connectors ..........	8
Power Connection ..................................................	8
Aerial Connection ...................................................	8
Connecting the LCD TV to a PC.............................	9
Connecting to a DVD Player...................................	9
Using the Cable Holder ..........................................	9
Using Side AV Connectors ...................................	10
Connecting Other Equipment via Scart ................	10
Inserting Batteries into the Remote Control
Handset ................................................................	10
Switching the TV On/Off .......................................	10
To Switch the TV On .........................................	10
To Switch the TV Off .........................................	10
Input Selection.......................................................	11
Basic Operations ...................................................	11
Operation with the Buttons on the TV................	11
Initial Settings ........................................................	11
General Operation................................................	12
Electronic Programme Guide (EPG) ....................	12
Displaying Subtitles ..........................................	12
Digital Teletext (** for UK only) .........................	13
Analogue Teletext .............................................	13
Widescreen.......................................................	13
IDTV Menu System ..............................................	13
Channel List......................................................	13
Timers...............................................................	15
Conditional Access ...........................................	15
TV Setup...........................................................	15
Setup ................................................................	15
Analogue TV Menu System..................................	19
Picture Menu.....................................................	19

Sound Menu .....................................................	20
Feature Menu ...................................................	21
Install Menu ......................................................	22
Source Menu ....................................................	23
PC Mode Menu System........................................	23
PC Position Menu.............................................	23
Displaying TV Information ....................................	24
Mute Function.......................................................	24
Picture Mode Selection.........................................	24
Freezing Picture ...................................................	24
Zoom Modes.........................................................	24
Auto ..................................................................	24
16:9...................................................................	24
4:3.....................................................................	24
Panoramic.........................................................	25
14:9...................................................................	25
Cinema .............................................................	25
Subtitle..............................................................	25
Zoom.................................................................	25
Teletext .................................................................	25
Tips.......................................................................	26
Image Persistence............................................	26
No Power..........................................................	26
Poor Picture......................................................	26
No Picture.........................................................	26
Sound ...............................................................	26
Remote Control.................................................	26
Input Sources....................................................	26
Appendix A: PC Input Typical Display Modes.......	27
Appendix B: AV and HDMI Signal Compatibility
(Input Signal Types)..............................................	28
Speciﬁcations .......................................................	29
DVB-T functionality information ............................	30
Product Guarantee ...............................................	31

English - 1 -

Accessories

	OK
	SELECT		Batteries: 2 X AAA
MENU		INFO /	Batteries: 2 X AAA
M
ABC	DEF	GHI
1	2	3
JKL	MNO	PQR
4	5	6
STU	VWX	YZ
7	8	9	Instruction Book
PRESETS	0	RETURN	Instruction Book

P+

			P -
SWAP	TV	DTV	FAV	SOURCE

SCREEN

LANG

SUBTITLE

SLEEP

EPG /	Quick Guide

RC 1800

Remote

Controller

Cable Holder

Features

•Remote controlled colour LCD TV.

•Fully integrated digital TV (DVB-T).

•HDMI connector for digital video and audio. This connection is also designed to accept high deﬁnition signals.

•200 programmes from VHF, UHF(analogue).

•500 programmes for digital mode (IDTV).

•OSD menu system.

•Scart socket for external devices (such as video, video games, audio set, etc.).

•Stereo sound system.

•Teletext, fastext, TOP text.

•Headphone connection.

•Automatic programming system.

•Forward or backward manual tuning.

•Sleep timer.

•Child lock.

•Automatic sound mute when no transmission.

•NTSC playback.

•AVL (Automatic Volume Limiting).

•When no valid signal is detected, after 5 minutes the

TV switches automatically to standby mode.

•PLL (Frequency Search).

•PC input.

•Plug&Play for Windows 98,ME,2000,XP, Vista.

•Game Mode.

Introduction

Thank you for choosing this product. This manual will guide you for the proper operation of your

TV. Before operating the TV, please read

this manual thoroughly.

Please do keep this manual in a safe place for future references.

Preparation

For ventilation, leave a free space of at least 10 cm all around the set. To prevent any fault and unsafe situations, please do not place any objects on top of the set.

Use this device in moderate climates.

	10 cm
10 cm	cm 10

Safety Precautions

Please read the following recommended safety precautions carefully for your safety.

SOME DOS AND DON’TS ON THE SAFE USE OF EQUIPMENT

This equipment has been designed and manufactured to meet international safety standards but, like any electrical equipment, care must be taken if you are to obtain the best results and safety is to be assured.

**************

DO read the operating instructions before you attempt to use the equipment.

DO ensure that all electrical connections (including the mains plug, extension leads and inter-connections between the pieces of equipment) are properly made and in accordance with the manufacturer’s instructions. Switch off and withdraw the mains plug before making or changing connections.

DO consult your dealer if you are ever in doubt about the installation, operation or safety of your equipment.

DO be careful with glass panels or doors on equipment.

DO route the mains lead so that it is not likely to be walked on, crushed, chafed, or subjected to excessive wear and tear or heat.

**************

English - 2 -

DON’T remove any ﬁxed cover as this may expose dangerous voltages.

DON’T obstruct the ventilation openings of the equipment with items such as newspapers, tablecloths, curtains, etc. Overheating will cause damage and shorten the life of the equipment.

DON’T allow electrical equipment to be exposed to dripping or splashing, or objects ﬁlled with liquids, such as vases, to be placed on the equipment.

DON’T place hot objects or naked ﬂame sources such as lighted candles or nightlights on, or close to equipment. High temperatures can melt plastic and lead to ﬁres.

DON’T use makeshift stands and NEVER ﬁx legs with wood screws - to ensure

complete safety always fit the manufacturer’s approved stand or legs with the ﬁxings

provided according to the instructions.

DON’T use equipment such as personal stereos or radios so that you are distracted from

the requirements of trafﬁc safety. It is illegal to watch television whilst driving.

DON’T listen to headphones at high volume, as such use can permanently damage your

hearing.

DON’T leave equipment switched on when it is unattended unless it is speciﬁcally stated

that it is designed for unattended operation or has a stand-by mode. Switch off using the

switch on the equipment and make sure that your family know how to do this. Special

arrangements may need to be made for inﬁrm or handicapped people.

DON’T continue to operate the equipment if you are in any doubt about it working

normally, or if it is damaged in any way - switch off, withdraw the mains plug and consult

your dealer.

ABOVE ALL

---NEVER let anyone especially children push anything into holes, slots or any other opening in the case - this could result in a fatal electrical shock;

---NEVER guess or take chances with electrical equipment of any kind

---it is better to be safe than sorry!

*************

Power Source

The TV set should be operated only from a 220-240

V AC, 50 Hz outlet.

Power Cord

Do not place the set, a piece of furniture, etc. on the power cord (mains lead) or pinch the cord. Handle the power cord by the plug. Do not unplug the appliance by pulling from the power cord and never touch the power cord with wet hands as this could cause a short circuit or electric shock. Never make a knot in the cord or tie it with other cords. The power cords should be placed in such a way that they are not likely to be stepped on. A damaged power cord can cause ﬁre or give you an electric shock. When it is damaged and needs to be replaced, it should be done by qualiﬁed personnel.

This TV receiver is supplied with a moulded mains plug. The mains plug must not be cut off, as it may contain a special radio interference ﬁlter, the removal of which could lead to impaired performance. If you wish to extend the lead, obtain an appropriate safety approved extension lead or consult your dealer.

Observe the manufacturers instructions when connecting extension leads to the set. Check the fuse rating on the new plug; this should be ﬁtted with a 5 Amp fuse which conforms to either ASTA or BSI (BS1362) approvals, these are easily identiﬁable by

either the ASA or symbols. If you are in any doubt about the installation of an extension lead, please consult a competent electrician.

Warning

Do not leave your TV in standby or operating mode when you leave your house.

Disconnecting the Device

The mains plug is used to disconnect TV set from the mains and therefore it must remain readily operable.

Moisture and Water

Do not use this device in a humid and damp place (avoid the bathroom, the sink in the kitchen, and near the washing machine). Do not expose this device to rain or water, as this may be dangerous

and do not place objects ﬁlled with liquids, such as ﬂower vases, on top. Avoid from

dripping or splashing.

If any solid object or liquid falls into the cabinet, unplug the TV and have it checked by qualiﬁed personnel before operating it any further.

English - 3 -

Cleaning

Before cleaning, unplug the TV set from the wall outlet. Do not use liquid or

aerosol cleaners. Use soft and dry cloth.

Ventilation

The slots and openings on the TV set are intended for ventilation and to ensure reliable operation. To prevent overheating, these openings must not be blocked or covered in anyway.

Heat and Flames

The set should not be placed near to open

ﬂames and sources of intense heat such

as an electric heater. Ensure that no open

ﬂame sources, such as lighted candles, are placed on top of the TV. Batteries should not be exposed to excessive heat such as sunshine, ﬁre or the like.

Lightning

Before a storm and lightning or when going on holiday, disconnect the power cord and

aerial lead from the wall sockets.

Replacement Parts

When replacement parts are required, make sure that the service technician has used replacement parts, which are speciﬁed by the manufacturer or have the same speciﬁcations as the original one. Unauthorized substitutions may result in ﬁre, electrical shock or other hazards.

Servicing

Please refer all servicing to qualified personnel. Do not remove the cover yourself as this may result in an electric shock.

Waste Disposal

Instructions for waste disposal:

•Packaging and packaging aids are recyclable and should principally be recycled. Packaging materials, such as foil bag, must be kept away from children.

•Batteries, including those which are heavy metalfree, should not be disposed of with household waste. Please dispose of used battery in an environment friendly manner. Find out about the legal regulations which apply in your area.

•Cold cathode fluorescent lamp in LCD PANEL contains a small amount of mercury; please follow the local laws or regulations for disposal.

Information for Users in European Union Countries

The above mark is in compliance with the Waste Electrical and Electronic

Equipment Directive 2002/96/

EC (WEEE). The mark indicates the requirement NOT to dispose the equipment including any spent or discarded batteries as unsorted municipal waste, but use the return

and collection systems available. If the batteries or accumulators included with this equipment display the chemical symbol Hg, Cd, or Pb, then it means that the battery has a heavy metal content of more than

0.0005% Mercury, or more than 0.002% Cadmium or more than, 0.004% Lead.

Headphone Volume

Excessive sound pressure from earphones and headphones can cause hearing loss.

Installation

To prevent injury, this device must be securely attached to the wall in accordance with the installation instructions when mounted to the wall (if the option is available).

LCD Screen

The LCD panel is a very high technology product with about a million thin ﬁlm transistors, giving you ﬁne picture details. Occasionally, a few non-active pixels may appear on the screen as a ﬁxed blue, green or red point. Please note that this does not affect the

performance of your product.

Connection to a Television Distribution System (Cable TV etc.) from Tuner

Device connected to the protective earthing of the building installation through the mains connection or through other apparatus with a connection to protective earthing-and to a television distribution system using coaxial cable, may in some circumstances create a ﬁre hazard.

Connection to a cable distribution system has therefore to be provided through a device providing electrical isolation below a certain frequency range

(galvanic isolator, see EN 60728-11).

English - 4 -

Environmental Information

• This television has been designed to be environmentally friendly by consuming less energy.

You will not only help to save the environment but you can also save money by reducing electricity bills thanks to the energy efﬁciency feature of this TV. To reduce energy consumption, you should take the following steps:

•You can use Power Save Mode setting, located in the Feature menu. If you set Power Save Mode to On, the TV will switch to energy-saving mode and brightness level of TV set will be set to the optimum level for home viewing.

Note that some picture settings will be unavailable to be changed when the TV is in Power Save Mode.

•When the TV is not in use, please switch off or remove the mains plug from the wall socket. This will also reduce energy consumption.

•Also remove the mains plug from the wall socket when you are away from home for long period of time.

•Please help us to save the environment by following these steps.

English - 5 -

Overview of the Remote Control

1.Standby

2.Cursor up / Page up (in TXT mode)

3.Cursor right / Subpage (in TXT mode)

4.Info / Reveal (in TXT mode)

5.Numeric buttons

6.Return / Exit (in DTV mode) / Index page (in TXT mode)

7.Programme up / Page down (in DTV mode)

8.Volume up

9.Favourite mode (in DTV mode)

10.AV / Source selection

11.Yellow / Feature menu / Current language (*)(in

DTV mode)

12.Blue / Install menu / Favourite mode (*) (in DTV mode)

13.Subtitle on-off / TXT subtitle

14.Sleep timer

15.No function

16.Guide (in DTV mode)

17.Update (in TXT mode)

18.Teletext / Mix / Pat

19.Image size / Expand (in TXT mode)

20.Mono-Stereo / Dual I-II / Current language (in DTV mode) (*)

21.Red / Sound menu / Channel list (in DTV mode)

22.Green / Picture menu / Subtitle on-off (in DTV mode) (*)

23.Previous Programme / Swap

24.TV – Digital TV mode

25.Programme down / Page up (in DTV mode)

26.Volume down

27.Picture mode selection

28.Menu on-off

29.Cursor down / Page down (in TXT mode)

30.Cursor left

31.OK / Select / Freeze picture / Hold (in TXT mode)

32.Mute

(*) For EU countries except UK.

32				1
32
31
30				2
		OK		3
29		OK
29		SELECT
28				4
28
	MENU		INFO /
	M
	ABC	DEF	GHI	5
	1	2	3	5
	1	2	3
	JKL	MNO	PQR
	4	5	6
	STU	VWX	YZ
27	7	8	9
		0		6
		0
	PRESETS		RETURN	7
				7
26		P+		8
				8

25		-		+
25
24			P -		9
24

23					10
22					11
21	SWAP	TV DTV	FAV	SOURCE	12
21					12
20					13
19	SCREEN	LANG	SUBTITLE	SLEEP	14
18				/	15
			EPG	/
17					16
					16
		RC 1800

English - 6 -

LCD TV and Operating Buttons

FRONT and REAR VIEW	SIDE VIEW	Control Buttons

1. Standby button

2. TV/AV button

3. Programme Up/Down buttons

4. Volume Up/Down buttons

Note: Press “” /“” buttons at the same time to view main menu.

Viewing the ConnectionsBack Connectors

1.SCART socket inputs or outputs for external devices.

Connect the SCART cable between SCART socket on TV and SCART socket on your external device (such as a decoder, a VCR or a DVD player).

Note: If an external device is connected via the SCART socket, the TV will automatically switch to AV mode.

2.PC Input is for connecting a personal computer to the TV set. Connect the PC cable between the PC INPUT on the TV and the PC output on your PC. Please do not connect a device to YPbPr socket while using PC input.

HDMI 2	HDMI 1
VGA
SPDIF
Coax.OUT
SCART

3.S/PDIF Coaxial Out outputs digital audio signals of the currently watched source.

4.RF Input connects to an antenna or a cable.

Note that if you use a decoder or a media recorder, you should connect the aerial cable through the device to the television with an appropriate antenna cable, as shown in the illustration in the following pages.

5.HDMI 2: HDMI input

6.HDMI 1: HDMI input

HDMI Input is for connecting a device that has an HDMI socket.

Your LCD Television is capable of displaying High Deﬁnition pictures from devices such as a High Deﬁnition Satellite Receiver or DVD Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets can accept either 480i, 480p, 576p, 576i, 720p, 1080i, 1080p signals. No sound connection is needed for an HDMI to HDMI connection.

When you use the wall mount kit (optional) with the LCD TV, we would deﬁnitely recommend to plug all your cables into the back of the LCD before mounting to the wall.

English - 7 -

Viewing the Connections - Side Connectors

1. CI Slot is used for inserting a CI card. A CI card allows you to view all the channels that you subscribe to. For more information, see “Conditional Access” section.

2. Component Video Inputs (YPbPr) are used for connecting component video.You can connect the component video and audio sockets with

a device that has component output. Connect the component video cables between the COMPONENT VIDEO INPUTS on on the TV and the

component video outputs of your device. While connecting, be sure that the letters on your TV, “Y”, “Pb”, “Pr” correspond with your device’s connectors.

IMPORTANT:PleasedonotconnectadevicetoPCsocketwhileusingYPbPrinput.

3. Video Input is used for connecting video signals of external devices.

Connect the video cable between the VIDEO IN socket on the TV and the

VIDEO OUT jack on your device.

4. Audio Inputs are used for connecting audio signals of external devices.

Connect the audio cable between the AUDIO INPUTS on the TV and the

AUDIO OUTPUT jacks on your device.

Also to enable YPbPr sound connection in such a case, use an appropriate audio cable between the connected device’s audio outputs and the TV’s audio inputs

Note: If you connect a device to the TV via the VIDEO or YPbPr cable you should also connect your device with an audio cable to the AUDIO INPUTS of the TV to enable audio.

5.Headphone jack is used for connecting an external headphone to the system. Connect to the HEADPHONE jack to listen to the TV from headphones.

6., switch is used for turning the TV on or off.

Power Connection

IMPORTANT: The TV set is designed to operate on 220-240V AC, 50 Hz.

•After unpacking, allow the TV set to reach the ambient room temperature before you connect the set to the mains.

•Plug the power cable to the mains socket outlet.

Aerial Connection

• Connect the aerial or cable TV plug to the AERIAL INPUT socket located at the rear of the TV.

HDMI 2	HDMI 1
VGA
SPDIF
Coax.OUT
SCART

English - 8 -

Connecting the LCD TV to a

For displaying your computer’s screen image on your LCD TV, you can connect your computer to the

TV set.

•Power off both computer and display before making any connections.

•Use 15-pin D-sub display cable to connect a PC to the LCD TV.Use an audio cable between audio inputs of the TV (side) and audio output of your PC to enable sound connection.

•When the connection is made, switch to PC source.

See “Input selection” section.

•Set the resolution that suits your viewing requirements.

Resolution information can be found in the appendix

parts.

	HDMI 2	HDMI 1
	VGA
	SPDIF
	Coax.OUT
		SCART
	Audio	PC Input
	Inputs	PC Input
	Inputs

PC audio cable

PC RGB cable

(not supplied)

to AUDIO INPUTS

to PC input

on the TV

Connecting to a DVD Player

If you want to connect a DVD player to your LCD

TV, you can use connectors of the TV set. DVD players may have different connectors. Please refer to your DVD player’s instruction book for additional information. Power off both the TV and the device before making any connections.

Note: Cables shown in the illustration are not supplied.

•If your DVD player has an HDMI socket, you can connect via HDMI. When you connect to DVD player

as illustrated below, switch to HDMI source. See, “Input Selection” section.

•Most DVD players are connected through

COMPONENT SOCKETS. Use a component video cable to connect video input. To enable sound connection, use AUDIO IN located side of the TV

(YPbPr cable is not supplied).

•When the connection is made, switch to YPbPr source. See, “Input selection” section.

•You may also connect through the SCART socket.

Use a SCART cable as shown below.

	This cable is	Component
Scart socket		audio
	not supported.		HDMI
		inputs
			inputs

DVD Player

Note: These methods of connection perform the same function but in different levels of quality. It is not necessary

to connect by all three methods.

Using the Cable Holder

You can use the supplied cable holder as the following:

•Place the cable holder into the cable holder hole located on the rear side of the TV as illustrated above.

•Place cables into the cable holder after all necessary connections are made.

English - 9 -

Using Side AV Connectors

You can connect a range of optional equipment to your LCD TV. Possible connections are shown below. Note that cables shown in the illustration are not supplied.

•For connecting a camcorder, connect to the VIDEO

IN socket and the AUDIO SOCKETS. For selecting the related source, see the section “Input selection” in the following parts.

•To listen the TV sound from headphones, connect to the HEADPHONE jack of theTV

Headphone

Camcorder

Connecting Other Equipment

via Scart

Most devices support SCART connection. You can connect a; DVD recorder, a VCR or a decoder to your LCD TV by using the SCART socket. Note that cables shown in the illustration are not supplied. Power off both the TV and the devices before making any connections.

For more information, refer to your device’s own instruction book.

SCART socket

DVD Recorder

Video Recorder

Decoder

Inserting Batteries into the

Remote Control Handset

•Remove the battery cover located on the back of the handset by gently pulling backwards from the indicated part.

•Insert two AAA/R3 or equivalent type batteries inside. Observe the correct polarity (+/-) when inserting batteries and replace the battery cover.

Note: Remove the battery from remote control handset when it is not to be used for a long period. Otherwise it can be damaged due to any leakage of batteries.

Switching the TV On/Off

To Switch the TV On

Connect the power cord to the 220-240V AC 50 Hz.

•Switch the “” button to position “|” so the TV will switch to standby mode. Then the standby LED lights up.

•To switch on the TV from standby mode either:

•Press the “ ” button, P+ / P- or a numeric button on the remote control.

•Press the “ ” or +/- button on the TV.

The TV will then switch on.

Note: If you switch on your TV via PROGRAMME UP/DOWN buttons on the remote control or on the TV set, the programme that you were watching last will be reselected.

By either method the TV will switch on.

To Switch the TV Off

•Switch the “” button to position 2 as illustrated,

so the TV will switch OFF.

•To power down the TV completely, unplug the power cord from the mains socket.

Note: When the TV is switched to standby mode, standby LED can blink to indicate that features such as Standby Search, Over Air Download or Timer is active.

English - 10 -

Input Selection

Once you have connected external systems to your

TV, you can switch to different input sources.

•Press SOURCE button on your remote control for directly changing sources.

• Select “Source” option from the main menu by using “” or “” button. Use then “” or

“” button to highlight an input and press “” button to select.

Note: You can mark desired source options by pressing the

OK button. Therefore, when SOURCE button is pressed, only the marked source options will be available (except for the TV source).

Basic Operations

You can operate your TV using both the remote control and onset buttons.

Operation with the Buttons on the TV

Volume Setting

•Press “” button to decrease volume or buttontoincreasevolume,soavolumelevelscale(slider) will be displayed on the screen.

Programme Selection

•Press “P/CH+” button to select the next programme or “P/ CH -” button to select the previous programme.

Viewing Main Menu

•Press “”/“”buttonsatthesametimetoview main menu. In the Main menu select sub-menu using “P/ CH -” or “P/CH +” buttons and enter the sub-menu using “” or “” buttons. To learn the usage of the menus, refer to the menu system sections.

AV Mode

•Press the “TV/AV” button in the control panel on the TV to switch between AV modes.

Operation with the Remote Control

•The remote control of your TV is designed to control all the functions of the model you selected. The functions will be described in accordance with the menu system of your TV.

•Functions of the menu system are described in the following sections.

Volume Setting

•Press “” button to increase the volume. Press “” button to decrease the volume. A volume level scale (slider) will be displayed on the screen.

Programme Selection (Previous or Next Programme)

•Press “P -” button to select the previous programme.

•Press “P +” button to select the next programme.

Programme Selection (Direct Access)

•Press numeric buttons on the remote control to select programmes between 0 and 9. The TV will switch to the selected programme. To select programmes between 10-500 (for IDTV) or 10-199 (for analogue), press the numeric buttons consecutively

•Press directly the programme number to reselect single digit programmes

Initial Settings

When the TV is turned on for the ﬁrst time, the menu for the language selection appears on the screen. The message “Welcome please select your language!” is displayed in all language options sequentially in the OSD.

By pressing the “” or “” buttons highlight the language you want to set and press OK button. After then, “First time installation” OSD will appear on the screen. By pressing “” or “” buttons, select the country you want to set and press OK button (* for EU countries).

Note: Country selection OSD will not be available for UK.

Press OK button on the remote control to continue and the following message will be displayed on the screen:

•To select the “Yes” or “No” option, highlight the item by using “” or “” buttons and press the “OK” button.

The IDTV will automatically tune to the UHF or VHF(*) (*For EU countries except UK) transmission channels, searching for digital terrestrial TV broadcasts and displaying the names of channels found. This process will take about a few minutes.

English - 11 -

+ 25 hidden pages