Hitachi DZ-HS503 User Manual

DZ-HS503
DZ-HS503
Instruction manual
To obtain the best performance and ensure years of trouble-free use, please read this entire instruction manual.
Important Information
The power switch turns the DVD video camera/recorder on and off, leaving the date/time feature unaffected. If the camera/recorder is to be left unattended for a long period of time, turn it off.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT
EXPOSE THIS UNIT TO RAIN OR MOISTURE.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, USE THE
RECOMMENDED ACCESSORIES ONLY.
WARNING: TO PREVENT FIRE OR SHOCK HAZARD, BE SURE TO USE THE SPECIFIED AC ADAPTER/ CHARGER (DZ-ACS3).
The DVD video camera/recorder and AC adapter/charger have the following caution marks.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
CAUTION: TO REDUCE THE RISK OF
ELECTRIC SHOCK, DO NOT OPEN.
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED
SERVICE PERSONNEL.
Precautions
WARNING: Many television programs and films
are copyrighted. In certain circumstances, copy­right law may apply to private in-home videotaping of copyrighted materials.
This Class B digital apparatus complies with Canadian ICES-003.
The liquid crystal display (LCD) panel is made by highly precise technology. More than
99.99% of its picture elements (pixels) are effective, but some (less than 0.01%) may appear as colored bright dots. This does not indicate a fault as the LCD panel stretches the limits of current technology.
Identifications of caution marks
This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore, it is dangerous to make any kind of contact with any inside part of this unit.
This symbol alerts the user that important literature concerning the operation and maintenance of this unit has been included. Therefore, it should be read carefully to avoid any problems.
CLASS 1 LASER PRODUCT
CAUTION This product contains a laser diode of higher class than 1. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
2
Microsoft®, Windows®, Windows® Me, Windows® 2000 Professional, and Windows® XP are registered trademarks of Microsoft Corporation. Windows Vista™ is a trademark of Microsoft Corporation.
®
Intel
, Pentium® Processor, and Celeron® Processor are registered trademarks of Intel Corporation.
®
Intel
Core is a trademark of Intel Corporation.
Macintosh is a trademark of Apple, Inc.
®
IBM
and PC/AT® are registered trademarks of International Business Machines Corporation. Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of Dolby Laboratories. Other company names and product names listed are trademarks or brand names belonging to each individual company. SD logo is a trademark.
3
IMPORTANT SAFETY INSTRUCTIONS
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of DVD video camera/ recorder and accessory equipment.
1 Read these instructions.
2 Keep these instructions.
3 Heed all warnings.
4 Follow all instructions.
5 Do not use this apparatus near water.
6 Clean only with dry cloth.
7 Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
8 Do not install near any heat sources such as
radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.
9 Protect the power cord from being walked on or
pinched particularly at plugs, convenience receptacles, and the point where they exit from the apparatus.
10 Only use attachments/accessories specified by the
manufacturer.
11 Use only with the cart, stand,
tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.
12 Unplug this apparatus during lightning storms or
when unused for long periods of time.
13 Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
14 The apparatus shall not be exposed to dripping or
splashing and that no objects filled with liquids, such as vases, shall be placed on the apparatus.
15 The equipment (AC Adapter/Charger) shall be
used near the socket-outlet and shall be easily accessible.
4
Cautions on HDD
Save the data recorded on HDD:
To back up the data recorded on HDD, save it on a DVD. It is also recommended that you use this
DVD video camera/recorder to dub the data. You can also use a PC to save the data on a DVD.
It is recommended that you periodically save your recordings.
Do not subject the DVD video camera/recorder to any vibrations or impact:
This could result in the HDD not being recognized or recording, playback or dubbing to become
impossible.
Do not subject this DVD video camera/recorder to any vibrations or impact especially during
recording, playback or dubbing, or while the ACCESS/PC indicator is lit or blinking.
If vibrations to this DVD video camera/recorder are repeated, or the drop status of DVD video
camera/recorder is detected (see page 69), recording, playback or dubbing will stop to protect the HDD in this DVD video camera/recorder.
Carefully check the temperature of this DVD video camera/recorder:
If the temperature of this DVD video camera/recorder is too high or too low, normal recording or
playback may not be possible.
If the power switch is set to “HDD” with the temperature of this DVD video camera/recorder too
high or too low, message “The temperature of HDD is outside the operating temperature range. Turn off power.” may appear to protect the HDD. Even if this happens, setting the power switch to “DVD” may allow you to use the DVD video camera/recorder with a DVD, so it is recommended that you carry a spare DVD even if you intend to record on the HDD.
This DVD video camera/recorder cannot be used at high altitude:
Note that the DVD video camera/recorder cannot be used in a place where the atmospheric
pressure is low, such as 3,000 meters or more above sea-level.
Do not place this DVD video camera/recorder near a magnet or magnetic field:
If you so, recording, playback or dubbing may not be possible.
Please note in advance that Hitachi will not accept any liability or make compensation for loss of data, or direct or indirect damage when recording or playback is not performed normally due to a fault in this DVD video camera/recorder. This also applies to repairs on this DVD video camera/recorder (including repair of components other than HDD).
Cautions When Using
Hitachi cannot compensate for any damages caused when recording is not made normally or
recorded contents cannot be played back because of a defect in the DVD video camera/ recorder, disc or card. Also, Hitachi cannot be responsible for your recorded video and audio.
If you or a third party make a mistake when handling this DVD video camera/recorder, disc,
card, etc., the recorded contents may be lost. We cannot be responsible for compensation for damage due to loss of recorded contents.
Handle the liquid crystal display (LCD) with care:
The LCD is a very delicate display device: Do not press its surface with force, hit it or prick it with
a sharp object.
If you push the LCD surface, unevenness in display may occur. If unevenness does not disappear
soon, turn the DVD video camera/recorder off, wait for a few moments, and then turn it on again.
Do not place the DVD video camera/recorder with the open LCD screen down.
Close the LCD monitor when not using the DVD video camera/recorder.
5
Liquid crystal display (LCD) and viewfinder:
The LCD screen and viewfinder are the products of highly precise technology. Among the total
number of pixels (approx. 120,000 pixels for LCD monitor and equivalent to approx. 200,000 pixels for viewfinder), 0.01% or less pixels may be missing (black dots) or may remain lit as colored dots (red, blue, green). This shows the limitations of the current technology, and does not indicate a fault that will interfere with recording.
The LCD screen and viewfinder will be slightly dimmer than usual when the DVD video camera/
recorder is at low temperature, as in cold areas, or immediately after power is turned on. Normal brightness will be restored when the temperature inside the DVD video camera/recorder rises.
Hold the DVD video camera/recorder correctly:
Do not hold the viewfinder or LCD monitor when lifting the DVD video camera/recorder: The
viewfinder or LCD monitor could detach and the DVD video camera/recorder may fall.
Do not subject the DVD video camera/recorder to impact:
This DVD video camera/recorder is a precision machine. Take great care that you do not strike it
against a hard object or let it fall.
When using a tripod, firmly secure the DVD video camera/recorder on it. Do not use the DVD
video camera/recorder with a tripod in a place where it is subject to severe vibrations or impact.
No sand or dust!
Fine sand or dust entering the DVD video camera/recorder or AC adapter/charger could cause
malfunctions or defects.
No water or oil!
Water or oil entering the DVD video camera/recorder or AC adapter/charger could cause electric
shock, malfunctions or defects.
Heat on surface of product:
The surfaces of the DVD video camera/recorder, AC adapter/charger and battery will be slightly
warm, but this does not indicate a fault.
Screen on connected TV:
Never leave the Disc Navigation screen, still image or camera image displayed on your TV to
which the DVD video camera/recorder is connected: Doing so could result in displayed image retention or phosphor degradation of TV screen.
Be careful of ambient temperature:
If the temperature of this DVD video camera/recorder is too high or too low, normal recording/
playback may not be possible.
Take care that the temperature of this DVD video camera/recorder, when connected to PC does
not rise excessively (reference for usage: approx. 30 minutes at about 86ºF (30ºC).
Do not leave the DVD video camera/recorder on beach sand or in a closed vehicle where the
temperature is very high for a long time: This could cause malfunctions.
Do not point directly at the sun:
If direct sunlight strikes the lens or viewfinder, the DVD video camera/recorder could malfunction
or a fire could occur.
Do not leave the DVD video camera/recorder with the LCD screen exposed to direct sunlight: This
could cause malfunctions.
Do not use the DVD video camera/recorder near TV or radio:
This could cause noise to appear on the TV screen or in radio broadcasts.
Do not use the DVD video camera/recorder near strong radio waves or magnetism:
If the DVD video camera/recorder is used near strong radio waves or magnetism, such as a radio
wave tower or electric appliances, recording or playback may stop, or noise could enter the video and audio that are being recorded. During playback of normally recorded video and audio, noise may also be present in picture and sound. At worst the DVD video camera/recorder could malfunction.
Do not expose the DVD video camera/recorder to soot or steam:
Thick soot or steam could damage the DVD video camera/recorder case or cause malfunctions.
6
Do not use the DVD video camera/recorder near corrosive gas:
If the DVD video camera/recorder is used in a place where there is dense exhaust gas generated
by gasoline or diesel engine, corrosive gas such as hydrogen sulfide, or sulfur such as in a hot spring area, the external or internal terminals could corrode, which would disable normal operation, or the battery connecting terminals could corrode, so power will not turn on.
Do not use the DVD video camera/recorder near ultrasonic humidifier:
With some water in humidifier, calcium and other chemicals dissolved in water could scatter in the
air, and white particles could adhere to the optical head of the DVD video camera/recorder, which could cause it to operate abnormally.
Do not expose the DVD video camera/recorder to insecticide:
Insecticide entering the DVD video camera/recorder could dirty the lens in laser pickup block for
DVD, and in such a case the DVD video camera/recorder might not operate normally. Turn the DVD video camera/recorder off and cover it with vinyl sheet, etc. before using insecticide.
Do not use a generally available 8 cm CD lens cleaner:
Cleaning the DVD lens is not necessary when using this DVD video camera/recorder in the usual
way.
Using 8 cm CD lens cleaner could cause this DVD video camera/recorder to be faulty.
If you have to clean the lens, use a Hitachi Maxell cleaner that is exclusively for 8 cm DVD discs.
Be careful of moisture condensation:
When you move the DVD video camera/recorder between places where the difference in
temperatures is great – such as entering a lodge from a ski slope or going out of a cooled room or vehicle – condensation (vapor in air warmed or cooled to water droplets) could occur on the lens and/or inside the DVD video camera/recorder. If condensation occurs, do not open the cover of disc or card insertion block if possible. If condensation occurs on the lens, wipe it off with a soft, dry cloth. Even if the external surface of DVD video camera/recorder has dried, condensation may remain inside: Turn the DVD video camera/recorder off and leave it in a dry place for at least 1 – 2 hours before using it again.
Do not use the DVD video camera/recorder for a long uninterrupted period of time:
This DVD video camera/recorder cannot be used for a long time continuously as a surveillance
camera/monitor. If you use it for a long continuous period of time, the temperature of DVD video camera/recorder could exceed the limit and the recording/playback operation may slow down or other faults could occur. If this happens, turn it off and wait for a while before using it again.
7
Do not turn the DVD video camera/recorder off while the ACCESS/PC indicator or CARD ACCESS indicator is lit or blinking:
The ACCESS/PC or CARD ACCESS indicator is lit or
blinking to show that data is being written to disc or card, or being read from it. At this time, do not do any of the following, so as not to damage the data:
Remove battery
Disconnect AC adapter/charger
Plug or unplug PC connection cable
Remove disc or card
Subject DVD video camera/recorder to severe
vibrations or impact
Violently open or close the LCD monitor
The ACCESS/PC indicator will light for a while after recording is finished. While it is lit, do not subject the DVD video camera/recorder to any vibration or impact, and do not disconnect the battery or AC adapter/charger. If, when using HDD/DVD, you turn the DVD video camera/recorder off while the ACCESS/PC indicator is lit or blinking, turn it on again: When using a DVD, turn it on with the DVD loaded. The HDD/DVD will be restored (see page 142).
CARD ACCESS indicator
ACCESS/PC indicator
Do not wipe the DVD video camera/recorder case with benzene or thinner:
The coating of case could peel off or the case surface could deteriorate.
When using a chemical cleaning cloth, follow the instructions.
Also read the instructions attached with optional accessories:
For optional accessories, observe the cautions and follow instruction manuals attached.
The battery provided has not been charged at time of purchase:
Charge it before using the DVD video camera/recorder (see page 29).
The battery will discharge as time passes. (The battery is produced so that it discharges on its own
in order to protect its characteristics.)
Disc cannot be inserted or removed unless a charged battery or AC adapter/ charger is connected to the DVD video camera/recorder.
Be sure to set the power switch to “OFF” when turning the DVD video camera/ recorder off:
Disconnecting the battery or AC adapter/charger while the DVD video camera/recorder is being
powered could cause a fault.
8
Cautions When Storing
Do not leave the DVD video camera/recorder in a place where the temperature is very high for a long period of time:
The temperature inside a closed vehicle or trunk can become very high in a hot season. If you leave
the DVD video camera/recorder in such a place, it could malfunction or the case could be damaged. Also, do not expose the DVD video camera/recorder to direct sunlight or place it near a heater.
Do not store the DVD video camera/recorder in a place where the humidity is high or in a dusty place:
Dust entering the DVD video camera/recorder could cause malfunctions. If the humidity is high,
the lens could be moldy, and the DVD video camera/recorder could become inoperable. It is recommended that you put the DVD video camera/recorder with desiccant in a box when storing it in a closet, etc.
Do not store the DVD video camera/recorder in a place subject to strong magnetism or intense vibrations:
This could cause malfunctions.
Detach the battery from the DVD video camera/recorder and store it in a cool place:
Leaving the battery attached or storing it at high temperature could shorten its life.
Suggestions and Restrictions
Make a trial recording:
Always make a trial recording before doing actual recording to make sure that recording is normal.
The data that have not been stored normally because of a defect in the DVD video camera/ recorder cannot be restored. It is recommended that you use the HDD from which recorded contents can be deleted for trial recording.
Do not use the DVD video camera/recorder for professional applications:
This DVD video camera/recorder is designed and produced for home-use recording and playback.
Copyright:
Data recorded on the HDD/disc/card in this DVD video camera/recorder using other digital/
analog media or devices are protected by the copyright act and cannot be used without permission of the owner of copyright, except for personal enjoyment. Be aware that recording is restricted for some demonstrations, performances and exhibitions, even for personal enjoyment.
9
CLEANING
Be sure to set the power switch to “OFF” before cleaning this DVD video camera/recorder.
Cleaning LCD screen and camera lens
Use dry, soft cloth to wipe dirt off. When cleaning the LCD screen, be careful not to use force, scratch it, or subject it to impact: Doing such could cause a defect in the screen, result in display unevenness, or damage the LCD monitor.
If dust adheres to the viewfinder lens, remove it using a cotton swab, etc.
Do not rub the lens with force: Doing so could scratch the lens.
HANDLING DISCS
Using discs
Discs are very delicate recording media. Carefully read the following cautions and observe them:
Always use a brand new disc when recording
important material.
Be sure not to touch the recording surface of
disc, or dirty or scratch it.
If there is dust, scratch, dirt on disc or if it is
warped, the following phenomena may occur:
Block noise in playback image
Momentary stop of playback image
Sound interrupted during playback, or abnormal sound
Blue thumbnail display* (Fig. 1)
Disc cannot correctly be recognized
Disc cannot be initialized
Delay between video and audio
Even if disc is normal, the above phenomena may occasionally occur. While the ACCESS/ PC indicator is lit, do not subject disc to vibrations or impact, and avoid using DVD video camera/recorder at extremely high or low temperatures, or in environment where condensation is likely to occur.
PLAY
*
Block noise
SELECT
PHOTO
Fig. 1
001/ 006All Programs
Cleaning DVD Video Camera/ Recorder Case
Do not wipe the DVD video camera/recorder case hard with any foreign object, such as grit, adhering to it, and do not use rough fabrics to clean the case: Doing so could scratch it. Use soft cloth, etc. to gently wipe dirt off the case.
Do not use benzene or thinner to clean DVD video camera/recorder case
The coating of case could peel off or the case could deteriorate. Wipe off dirt on the case with a soft cloth which has been completely wrung out. When using chemical cleaning cloth, follow instructions for use.
When recording images,
the DVD video camera/
001/ 002All Programs
recorder may avoid the portions of disc where recording is not possible, due to dust, scratches, etc. [It will pause m at
PLAY
SELECT
PHOTO
(Recording one scene may produce multiple thumbnails.)
such a portion and automatically restart recording (n).] This will cause recording to be interrupted for several seconds to several minutes, and multiple thumbnails will be created by one recording session as shown above. In this case, the recordable time on disc will decrease.
Be careful when removing the disc since the
metal of removal slot of DVD video camera/ recorder, and disc itself, may be hot.
Storing discs
When storing disc, replace it in the plastic case
in which it was purchased.
Be careful that no condensation occurs on disc.
Do not place disc in following places:
Direct sunlight for a long time
Where humidity is high or in dusty place
Where there is heat from a heater, etc.
10
DISC CLEANING
Use the disc cleaning cloth provided to lightly wipe off any dirt adhering to the disc as shown in the figure. Do not wipe the disc with force: Doing so could cause scratches. Never use solvent (thinner, water, antistat or detergent) for cleaning. Lightly wash the dirty cleaning cloth with detergent: The dirt removal capacity of the cloth will improve (rinse the cloth well with water so that no detergent remains).
Use the disc cleaning cloth to clean from inner to outer edges in axial direction.
NOTE WHEN TRANSFERRING OR DISCARDING DISCS AND SD MEMORY CARDS
The “Format” function on this DVD video camera/recorder will only change the file control information: It will not completely delete the data in the built-in hard disk; your personal data could leak out. To prevent the data from leaking out, execute complete deletion of HDD (see p. 111).
“Formatting” or “deletion” using the functions of DVD video camera/recorder or PC will change only the file control information: It will not completely delete the data on disc or memory card.
When transferring or discarding a disc or memory card, it is recommended that you physically
destroy it or use deletion exclusive software (generally available) to completely delete the data on it. It is user’s responsibility to control the data on disc and memory card.
Hitachi will not accept any responsibility for leaking of personal data.
Read This First
To guide you, we have included following five chapters.
The section on “Setups” explains how to set
up the DVD video camera/recorder, battery, and set the date/time.
The section on “Basic Techniques” explains the
basic operation of this DVD video camera/ recorder – recording of movies, still images, external input and playback of recorded images.
The section on “Disc Navigation” explains editing with Disc Navigation: Refer to this section when dubbing from HDD to disc, finalizing a DVD-RW/DVD-R/+RW and initializing a DVD-RAM/DVD-RW/+RW.
The section on “Connecting to PC” explains
the contents of provided CD-ROM and how to install the software included.
“Subsidiary Information” includes an
introduction to products sold separately, and troubleshooting.
We want this manual to be as helpful as possible, so it includes two easy ways to find the information you need:
A quick index for the information you use
most often.
A detailed table of contents directing you to specific information quickly (see pages 14 – 16).
Get to know your DVD video camera/recorder by using this manual, and get to know Hitachi. We appreciate your business.
Quick Index
Available Discs ................................................ 26
Recording Movie ............................................. 43
Playing Back.................................................... 73
Functions Available with Disc Navigation ........ 80
Dubbing on DVD.............................................. 84
Connecting to a TV........................................ 116
Connecting to PC .......................................... 122
With this DVD video camera/recorder you can view the picture being recorded or the playback picture whether on the LCD monitor or in the viewfinder. Opening or closing the LCD monitor switches the picture to appear on the LCD monitor or in the viewfinder.
It is possible to switch the language in the on-screen display of this DVD video camera/recorder (see page 35).
11
About This Manual
HDD
Displays in this manual
Understand that the displays are different from those you will actually see in the viewfinder or on the LCD screen.
Notation of cancel button
Press the stop/cancel button to stop your operation midway, or return the menu screen to the preceding one. The expression “press the C button” will be used in this text.
HDD
, 1, <, >, 2, / and 3 marks beside headings
Some functions of this DVD video camera/recorder are unavailable with HDD/disc/card used. Refer to the marks at right above each function to identify whether the HDD/disc/card is compatible with the function. Refer to these marks and identify the functions and operation to match the HDD/disc card you use.
12
Introduction
Recording is possible on both HDD and DVD: In FINE mode, recording for up to 11 hours is possible on HDD; up to 30 minutes on DVD (p. 43, 159).
Dubbing to an 8 cm DVD can be performed on this DVD video camera/recorder using only one button: Simple dubbing without a DVD recorder or PC
You can capture photos from videos (p. 75).
You can record an image displayed during playback of video as a photo on a card.
You can start recording immediately after stopping playback (p. 43, 74).
Unlike tape devices, you do not need to search for the recording start position or locate the beginning of blank portion. You can stop playback and immediately start recording: New recording will not overwrite any previously recorded data.
You can immediately play back desired recorded scenes (p. 73).
You do not need to rewind, unlike recorders using tape. You can select any scene you want and immediately play it back (using Disc Navigation function).
Use Disc Navigation to create your original movie (p. 102).
You can delete unnecessary scenes, move any scenes, etc., and create your original movie work (Play List). To edit the scenes recorded on the HDD, use the dubbing function to easily create a DVD from the edited original movie. If you edit the scenes recorded on a disc, you can play back the edited original movie and easily dub it on another DVD recorder or VCR.
Create original DVDs on PC (p. 122).
You can create an original DVD, using the provided software CD-ROM. The created DVD disc can be played back on DVD player/recorder, DVD-ROM drive, etc.
(p. 84)
.
13
Table of Contents
Important Information......................................... 2
For Your Safety.................................................. 2
Precautions........................................................ 2
IMPORTANT SAFETY INSTRUCTIONS........... 4
Cautions on HDD............................................... 5
Cautions When Using ........................................ 5
Cautions When Storing...................................... 9
Suggestions and Restrictions ............................ 9
CLEANING .......................................................... 10
HANDLING DISCS .............................................. 10
DISC CLEANING................................................. 11
NOTE WHEN TRANSFERRING OR
DISCARDING DISCS AND SD MEMORY
CARDS ............................................................. 11
Read This First ................................................ 11
About This Manual........................................... 12
Introduction ...................................................... 13
Table of Contents ............................................ 14
Checking Provided Accessories ......................17
Names of Parts ................................................ 18
Setups
Demonstration Function................................... 22
Setting Up the DVD Video
Camera/Recorder.......................................... 22
HOLDING DVD VIDEO
CAMERA/RECORDER..................................... 22
ATTACHING SHOULDER STRAP ...................... 22
ATTACHING LENS CAP ..................................... 23
INSERTING BATTERY INTO REMOTE
CONTROL ........................................................ 23
REMOVING BATTERY FROM REMOTE
CONTROL ........................................................ 24
HDD/DVD/Cards.............................................. 25
HDD, DISCS ........................................................ 26
INFORMATION ON DVD-R................................. 26
NOTES ON FINALIZATION ................................ 26
EXAMPLES OF DISCS THAT CANNOT BE USED
ON THIS DVD VIDEO
CAMERA/RECORDER..................................... 27
AVAILABLE CARDS............................................ 27
CAUTIONS FOR DISC AND CARD.........................27
Preparations for Power Supply ........................ 28
USING DVD VIDEO CAMERA/RECORDER
WITH AC ADAPTER/CHARGER...................... 28
Setting Up the Battery...................................... 29
CHARGING BATTERY........................................ 29
ATTACHING BATTERY TO DVD VIDEO
CAMERA/RECORDER..................................... 30
REMOVING BATTERY ....................................... 30
BATTERY REMAINING LEVEL INDICATOR ...... 32
EFFICIENT USE OF BATTERY .......................... 32
Turning DVD Video Camera/Recorder
On and Off..................................................... 33
Viewing Images ............................................... 34
VIEWING IMAGE ON LCD MONITOR
SCREEN ........................................................... 34
VIEWING SUBJECT THROUGH
VIEWFINDER ................................................... 34
Changing Display Language (Language) ........35
Setting Date and Time ..................................... 35
CHANGING DISPLAY FORMAT OF
DATE AND TIME .............................................. 36
Initial Settings .................................................. 36
SWITCHING OPERATING SOUND ON OR OFF
(BEEP) .............................................................. 36
TURNING DVD VIDEO CAMERA/RECORDER
OFF AUTOMATICALLY (POWER SAVE)........36
RESETTING MENU SETTINGS TO DEFAULTS
(RESET) ........................................................... 37
TURNING RECORD LED ON OR OFF
(RECORD LED) ................................................ 37
CHANGING SETTING OF DEMONSTRATION ..37
LCD/EVF Setup ...............................................38
ADJUSTING BRIGHTNESS OF LCD SCREEN
(LCD BRIGHTNESS) AND VIEWFINDER
(EVF BRIGHTNESS) ........................................ 38
ADJUSTING COLOR DENSITY
(COLOR LEVEL) .............................................. 39
ALWAYS DISPLAYING IMAGE IN
VIEWFINDER ................................................... 39
Inserting and Removing Disc ........................... 40
Inserting and Removing Card ..........................42
Basic Techniques
Recording Movie.............................................. 43
Recording Stills................................................ 44
Swift Restart of Recording (SLEEP/RESTART
button) ...........................................................45
On-Screen Information .................................... 46
INFORMATION DISPLAY DURING
RECORDING .................................................... 46
Checking Flow of Menu ...................................51
Zooming........................................................... 53
MACRO RECORDING ........................................ 53
RECORDING SUBJECTS FOR STRONGER
WIDE-ANGLE OR TELEPHOTO EFFECT .......54
Manually Focusing Subject.............................. 55
FOCUSING DURING RECORDING.................... 55
Adjusting Brightness of Image to be recorded
(Exposure).....................................................57
Compensating for Backlight ............................. 57
Built-in Video Flash.......................................... 58
Using Full Auto Function.................................. 59
Setting Up Camera Functions.......................... 60
14
SELECTING SHOOTING MODE TO MATCH
THE SUBJECT
(SWITCHING PROGRAM AE MODE).............. 60
RECORDING DARK SUBJECTS USING LCD
MONITOR LIGHT ............................................. 61
ADJUSTING COLOR (WHITE BALANCE) .......... 61
USING THE ELECTRONIC IMAGE STABILIZER
(EIS).................................................................. 63
RECORDING SUBJECT USING LARGE
MAGNIFICATION (DIGITAL ZOOM) ................ 63
REDUCING WIND NOISE DURING RECORDING
(MIC.FILTER) ................................................... 63
Setting Up Record Functions ...........................64
SWITCHING MOVIE QUALITY
(VIDEO MODE) ................................................ 64
SETTING TO WIDE TV SCREEN MODE (16:9
MODE).............................................................. 65
SWITCHING QUALITY OF STILL IMAGE
(QUALITY) ........................................................ 67
RECEIVING IMAGE FROM ANOTHER DEVICE
(INPUT SOURCE) ............................................ 67
SWITCHING EXTERNAL INPUT RECORDING
METHOD (PHOTO INPUT) .............................. 68
SELF-TIMER ....................................................... 68
SETTING ON-SCREEN DISPLAY OUTPUT ON
OR OFF (OSD OUTPUT) ................................. 69
DROP DETECTION (HDD PROTECTION)......... 69
Using External Microphone ..............................70
Disc Navigation
Using Disc Navigation ......................................71
STARTING OR TERMINATING DISC
NAVIGATION.................................................... 71
PLAYING BACK FROM DISC NAVIGATION
SCREEN........................................................... 73
ADJUSTING VOLUME DURING PLAYBACK..... 73
PLAYING BACK LATEST RECORDED SCENE. 74
DELETING LAST RECORDED SCENE.............. 74
CAPTURING PHOTO.......................................... 75
SEARCH PLAYBACK OF MOVIE ....................... 75
FRAME ADVANCE/FRAME BACK/SLOW
PLAYBACK OF MOVIE .................................... 75
SKIP PLAYBACK OF MOVIE.............................. 76
PLAYING BACK STILLS ..................................... 76
JUMPING TO SPECIFIED POINT (GO TO)........ 77
INFORMATION DISPLAY DURING
PLAYBACK ....................................................... 78
SELECTING MULTIPLE SCENES ...................... 79
SELECTING CONSECUTIVE SCENES
TOGETHER...................................................... 79
FUNCTIONS AVAILABLE WITH DISC
NAVIGATION.................................................... 80
UNDERSTANDING FLOW OF DISC
NAVIGATION MENU ........................................ 81
Dubbing on DVD ..............................................84
FIRST-TIME (“NEW”) DUBBING ......................... 85
DUBBING SCENES RECODED ON SAME DAY
COLLECTIVELY (“DATE” DUBBING) ..............86
DUBBING ALL SCENES RECORDED ON HDD
(DUBBING “ALL”) ............................................. 87
SELECTING SCENES RECORDED ON HDD AND
DUBBING THEM (SCENE “SELECT”
DUBBING) ........................................................ 88
TURNING OFF DUBBED MARK FROM
THUMBNAIL (MARK OFF) ............................... 88
Scene .............................................................. 89
DELETING SCENES (EDIT – DELETE) .............89
DIVIDING MOVIES (EDIT – DIVIDE) ..................90
COMBINING MULTIPLE SCENES
(EDIT – COMBINE)...........................................91
ARRANGING ORDER OF SCENES
(EDIT – MOVE) ................................................. 91
DIRECTING SCENES EFFECTIVELY
(EFFECT – FADE) ............................................ 92
PLAYING BACK BY SKIPPING SCENES
(EFFECT – SKIP) ............................................. 93
CHANGING IMAGES FOR THUMBNAILS
(EFFECT – THUMBNAIL).................................94
COPYING STILLS ON DVD-RAM TO CARD
(COPY) ............................................................. 95
LOCKING SCENES ON CARD (LOCK) .............. 96
SELECTING SCENES USING MENU SCREEN
(SELECT)..........................................................97
DISPLAYING INFORMATION USING MENU
SCREEN (DETAIL) ........................................... 98
Program........................................................... 99
WHAT IS “PROGRAM”? ...................................... 99
SWITCHING TO THUMBNAIL DISPLAY OF
SPECIFIC DATE (SELECT) .............................99
PLAYING BACK PROGRAM (PLAY) ................100
CHANGING TITLE OF PROGRAM (TITLE) ...... 100
Play List......................................................... 102
WHAT IS “PLAY LIST”? ..................................... 102
CREATING NEW PLAY LIST (CREATE) .......... 102
SWITCHING TO DISPLAY OF EACH PLAY LIST
(SELECT)........................................................103
PLAYING BACK A PLAY LIST (PLAY)..............103
ADDING SCENES TO PLAY LIST
(EDITING PLAY LIST) .................................... 104
DELETING SCENES FROM PLAY LIST (EDITING
PLAY LIST) .....................................................105
ADDING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST)..................... 105
DELETING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST)..................... 106
SELECTING SCENES USING SUBMENU FOR
EDITING (EDITING PLAY LIST)..................... 106
ARRANGING ORDER OF SCENES (MOVE) ...107
CHANGING TITLE OF PLAY LIST (TITLE)....... 108
DELETING PLAY LIST (DELETE).....................108
Go To ............................................................ 109
MOVING TO BEGINNING (END) OF HDD/DVD/
CARD.............................................................. 109
HDD/DVD/Card Management ....................... 109
INITIALIZING HDD/DVD/CARD ........................109
PROTECTION ................................................... 110
VERIFYING REMAINING FREE SPACE ON DISC
OR CARD (CAPACITY) .................................. 110
UPDATING CONTROL INFORMATION OF HDD/
DVD-RAM/DVD-RW (VR-MODE) (UPDATE
CONTROL INFO.)........................................... 111
15
TOC
DELETING DATA ON HDD
(FULL FORMAT) ............................................ 111
FINALIZING DVD-RW/DVD-R/+RW (FINALIZE
DVD) ............................................................... 112
ADDITIONALLY RECORDING ON FINALIZED
DVD-RW (VF-MODE)/+RW
(UNFINALIZE DVD)........................................ 113
Others ............................................................ 114
DISPLAYING DUBBED/UNDUBBED SCENES IN
LIST (CATEGORY)......................................... 114
DISPLAYING MOVIES OR STILLS
INDEPENDENTLY (CATEGORY) .................. 114
PLAYING BACK SCENES REPEATEDLY
(REPEAT PLAY) ............................................. 115
PLAYING BACK WIDE-MODE IMAGES ON 4:3
DISPLAY TV (TV TYPE)................................. 115
SLIDE SHOW (CONTINUOUS PLAYBACK OF
STILLS)........................................................... 115
Viewing on TV Screen ................................... 116
CONNECTING TO A TV ................................... 116
VIEWING ON TV SCREEN ............................... 117
Playback on DVD Recorder/Player................ 118
PLAYING BACK DVD-RAM/DVD-RW
(VR-MODE) .................................................... 118
PLAYING BACK DVD-RW (VF-MODE)/DVD-R/
+RW................................................................ 118
Recording (Dubbing) Images......................... 119
RECORDING (DUBBING) IMAGES FROM
OTHER VIDEO DEVICE................................. 119
RECORDING (DUBBING) IMAGES ON OTHER
VIDEO DEVICES............................................ 121
Connecting to PC
Software Provided ......................................... 122
Requirements of available PC .......................123
Installing Software ......................................... 124
Connecting to PC via PC Connection
Cable........................................................... 127
USING DISC IN DVD DRIVE BUILT INTO PC.. 129 BEFORE TERMINATING PC CONNECTION
(UNPLUGGING PC CONNECTION CABLE)/
CHANGING OVER POWER SWITCH ........... 130
Using ImageMixer 3 for Windows .................. 131
VIEWING IMAGES RECORDED ON HDD/DISC
USING PC ...................................................... 131
CREATING DVD-VIDEO USING IMAGES
RECORDED ON HDD/DISC .......................... 132
Using ImageMixer 3 Mac Edition for
DVDCAM..................................................... 135
VIEWING IMAGES RECORDED ON HDD/DISC
USING MACINTOSH...................................... 135
IMPORTING IMAGES RECORDED ON HDD/
DISC INTO MACINTOSH ............................... 136
CREATING DVD-VIDEO USING IMAGES
RECORDED ON HDD/DISC .......................... 137
Uninstalling Software ..................................... 139
Cautions when connecting DVD video camera/
recorder to PC............................................. 140
Introduction to Optional Accessories .............141
Subsidiary Information
CAMERA ACCESSORIES ................................ 141
POWER SUPPLY .............................................. 141
Trouble Messages .........................................142
Troubleshooting ............................................. 149
System Reset ................................................ 156
Major Specifications....................................... 157
STORAGE CAPACITY OF HDD/DVD/CARD....159
RECORDABLE STILLS (PHOTOS)
ON CARD ....................................................... 160
Index ..............................................................161
Be sure to read the following before opening the
package of CD-ROM ................................... 163
16
Checking Provided Accessories
Make sure that you have all the following accessories in package:
Battery (model DZ-BP14S):
Portable power supply for this DVD video camera/recorder. Charge it before use.
Power cable:
Connect between household AC outlet and AC adapter/charger.
AV/S input/output cable:
Used when viewing the picture played back on the DVD video camera/recorder on TV screen, or input or output video from/to another video device.
AC adapter/charger (model DZ-ACS3):
Used to power the DVD video camera/ recorder from AC outlet, or charge battery.
Infrared remote control (model DZ-RM4J):
Use to control the DVD video camera/ recorder from a distance.
Shoulder strap:
Attach to the DVD video camera/recorder to hang it from shoulder.
DC power cord:
When powering the DVD video camera/ recorder from household AC outlet, use this cord to connect the DVD video camera/recorder and AC adapter/charger.
Lithium battery (model CR2032):
To power the remote control.
Lens cap and lens cap string:
Attach the lens cap when not recording, to protect the lens.
Software CD-ROM:
Use this CD-ROM when connecting the DVD video camera/recorder to PC.
PC connection cable:
Use this cable when connecting the DVD video camera/recorder to PC.
Disc cleaning cloth:
Always use this to clean discs.
17
Names of Parts
23451
11
10
67 8 9
12
(Inside the cover)
1 Flash (p. 58) 2 Light receiving sensor
This sensor controls the amount of light to be emitted from the built-in flash. Take care not to block with hand, etc. during recording.
3 Stereo microphone
Take care that the microphone is not blocked by a hand, etc., during recording.
4 Recording indicator (p. 37, 43, 68)
The red indicator will light during recording.
5 Infrared receiver (p. 24)
When the remote control is used to operate the DVD video camera/recorder, this receiver will receive the infrared signal.
6 Optical 10× zoom lens (p. 53)
18
13
7 Lens hood (p. 54)
Always remove this lens hood when using the optional tele-conversion or wide­conversion lens.
8 Zoom lever (p. 53, 55, 73)
To adjust the zoom or volume.
9 Accessory shoe
The optional microphone can be attached here. (See the instruction manual of device to be attached for details.)
10 PC connection terminal (TO PC) (p. 127) 11 AV inout/output jack (p. 119, 121) 12 External microphone jack (p. 70) 13 Wide-screen color liquid crystal display
(inside) (p. 34)
14
16 17 182219
2015
21
14 Viewfinder (p. 34)
15 Diopter control (p. 34)
To adjust the focus of image appearing in the viewfinder. (Pull out the viewfinder.)
16 秒撮 (SLEEP/RESTART) button (p. 45)
To switch the sleep/restart status between ON and OFF.
17 アクセス/PC接続 (ACCESS/PC) indicator
(p. 8, 43)
Will blink or light when the HDD/DVD is accessed (write or read), or the DVD video camera/recorder is connected to a PC.
18 フォト/選択 (PHO
(p. 44, 79, 97)
19 ディスク取出し (DISC EJECT) button
(p. 40)
Press down and release this button to open the cover of DVD insertion block.
20 DVD insertion block (p. 40)
23 24 26
TO/SELECT) button
25
21 BATTERY EJECT button (p. 30)
Press this button when removing the battery.
22 Battery attachment platform (p. 30)
23 Record button (REC) (p. 43)
24 LOCK switch (p. 43)
It is recommended that you set the LOCK switch to L (to the upper position) to prevent the power switch in the “HDD” position from accidentally moving to “DVD”.
25 Power switch (p. 33)
26 Hand strap (p. 22)
19
27
36
35 38 39 40
37 4134
3129 30 32 3328
42
43
27 フルオート (FULL AUTO) button (p. 59)
To switch the DVD video camera /recorder to full automatic.
28 フォーカス (FOCUS) button (p. 55)
To switch between manual focus and auto­focus.
29 メニュー (MENU) button (p. 35, 51, 90)
Press this button to display the menu for setting camera functions and Disc Navigation.
30 ディスクナビゲーション
(DISC NAVIGATION) button (p. 71)
31 ダビング (DUBBING) button (p. 85)
32 Stop/cancel button (p. 12, 51, 74)
To end playback or cancel setting of menu.
33 露出 (EXPOSURE) button (p. 57)
Press this button to adjust the exposure.
34 Speaker (p. 73)
35 RESET button (p. 156)
To reset all settings to defaults (status when the DVD video camera/recorder was shipped from the factory).
36
画面表示
button (p. 46, 78)
Press this button to display the details of image being played back or camera setting status, or switch the display off.
37 CARD ACCESS indicator (p. 8, 44) 38 かんたんメニュー (QUICK MENU) button
(p. 51)
To display only the functions that you frequently use (simple menus).
39 ファイナライズ (FINALIZE) button (p. 112)
Press this button to finalize the recorded DVD-RW/DVD-R/+RW.
40 Card insertion block (p. 42)
41
逆光補正
button (p. 57)
Press this button when subject is being lighted from rear.
42 f / e / d / c / A buttons
(p. 35, 51, 55, 57, 74, 75, 76)
Use these buttons to select a scene or menu item, and then press the center ( scene, or designate an option from the menu. These buttons are also used to adjust the exposure or focus.
43 Tripod threaded hole
Used to attach the DVD video camera/ recorder to a tripod.
(DISPLAY (Screen display))
(BLC (backlight compensation))
A
) to play back the
20
44
45
46
47
48
49
50
44 フォト (PHOTO) button (p. 44)
45 録画 (REC) button (p. 43)
46 メニュー (MENU) button (p. 35, 51, 90)
47 選択 (SELECT) button (p. 79, 97)
48 Reverse search button (p. 51, 75)
49 削除 (DELETE) button (p. 89)
50 ディスクナビゲーション
(DISC NAVIGATION) button (p. 71)
51
52 53
54
55
56
57
58
59
52 ズームT (ZOOM T) button (p. 53)
53 デジタルズーム (DIGITAL ZOOM) button
(p. 53)
54 ズームW (ZOOM W) button (p. 53)
55 Reverse skip button (p. 51, 76)
56 Forward search button (p. 51, 75)
57 Play/pause button (p. 51, 74)
58 Stop button (p. 12, 51, 74)
51 画面表示 (DISPLAY) button (p. 46, 72, 78)
* The buttons on remote control will function the same as those on DVD video camera/recorder.
59 Forward skip button (p. 76)
21
Setups
This section explains preparations for recording – setting up the DVD video camera/recorder and battery.
Demonstration Function
This DVD video camera/recorder is equipped with a demonstration function. The default at purchase time is “Auto”, which will automatically start the demonstration approx. ten minutes after the DVD video camera/recorder, connected to the AC adapter/charger, is turned on and left unoperated. Refer to “CHANGING SETTING OF DEMONSTRATION” on page 37 if you wish to view the demonstration immediately or change the setting to “Off”.
Setting Up the DVD Video Camera/Recorder
HOLDING DVD VIDEO CAMERA/RECORDER
Insert your right hand from the bottom of DVD video camera/recorder up to the base of your thumb. Put your hand in a position where you can easily operate the REC button and the Zoom lever. Adjust the length of hand strap so that the DVD video camera/recorder is stable when you press the REC button with your thumb.
ATTACHING SHOULDER STRAP
Be sure to pass through the 2 slots.
22
Pass the shoulder strap through the shoulder strap attachments.
ATTACHING LENS CAP
1 Attach the shorter end of lens cap string to
the lens cap.
2 Attach the longer end of lens cap string to the
hand strap of DVD video camera/recorder.
3 Push the both sides of cap inward and attach
it over the lens.
Note:
Always keep the lens cap on when not using the DVD
video camera/recorder, to protect the lens.
When recording, attach the lens cap to the hand strap by hooking the tab inside the cap onto strap for comfortable shooting.
Shorter end
Longer end
Push and fit
INSERTING BATTERY INTO REMOTE CONTROL
Insert the provided lithium battery into remote control.
1 While inserting a fine rod into the hole
marked PUSH, pull the battery holder out forward.
2 Insert the lithium battery with the positive R
terminal facing down.
3 Slide the cover to close it.
Note:
The life of lithium battery is approximately one year. If
the battery is discharged, no operation is possible with remote control: Replace the battery.
Battery holder
23
REMOVING BATTERY FROM REMOTE CONTROL
1 While pushing the battery holder, slide the
battery out.
Warn ing :
KEEP THE BATTERY AWAY FROM CHILDREN AND
PETS.
IF SWALLOWED, CONSULT A PHYSICIAN IMMEDIATELY FOR EMERGENCY TREATMENT.
BATTERY MAY EXPLODE IF NOT HANDLED PROPERLY. DO NOT RECHARGE, DISASSEMBLE OR DISPOSE OF IN FIRE.
Using remote Control
Point the remote control to the infrared receiver on the DVD video camera/recorder. The remote controllable distance is up to 5 m.
:
Note
Replace the battery with a Hitachi Maxell, Sony,
Panasonic, Sanyo, Toshiba CR2032, or Duracell DL2032. Use of another battery may present a risk of fire or explosion.
Dispose of battery safely in accordance with local laws. Do not dispose of in fire.
Do not short circuit the battery.
Do not hold the battery with the metallic tweezers.
Keep the battery in a dark, cool, dry place.
Note:
When using the remote control, make sure that the
infrared receiver on DVD video camera/recorder is not exposed to direct sunlight or any intense light. If the infrared receiver is subject to light stronger than the infrared light from remote control, the DVD video camera/recorder cannot be operated by remote control.
If there is an obstacle between the remote control and infrared receiver on DVD video camera/recorder, remote control may not be possible.
24
The DVD video camera/recorder uses the “VCR2” remote control code of Hitachi VCRs. If you use a Hitachi VCR, etc. with remote control code set to “VCR2”, a VCR placed near the DVD video camera/ recorder will also be operated by the remote control: To prevent this, change the remote control code of the VCR.
HDD/DVD/Cards
The following table lists the storage media (discs and cards) that can be used on this DVD video camera/recorder and the functions which are available with them:
Media
Function
HDD
DVD­RAM
DVD- RW
mode)
To record video (p. 43) ●●●●●●—
To record photo (p.44) ——————
To delete image just recorded (p. 74)
To select image and delete it (p. 89)
●●●—— ●●
●●●——— ●
To edit image (p. 90 – 91) ●●●————
To play on other DVD players and DVD recorders (p. 112)
To use new disc or new card without formatting
To initialize and reuse (p. 109)
To additionally record on finalized disc (p. 113)
To edit copied video on PC (p. 122)
To playback video on PC (p. 122)
*
1: Playable on devices that conform to either 8 cm DVD-RAM, 8 cm DVD-RW (VR mode) or 8cm +RW.
*
2: Must be finalized. Cannot be played on some DVD players or DVD recorders.
*
3: Some DVD devices conform to SD memory card.
*
4: When media that are sold “formatted” are used. If the initialization format differs, the media can be initialized on
this DVD video camera/recorder and then used.
*
5: To additionally record, the finalized disc must be unfinalized.
*
6: The provided software is used.
*
7: Finalize the disc when editing/playing back on PC.
●●●● ●●
——●●*5—
*6
*6
*1
*4
*6
*6
DVD- RW
(VR
(VF
DVD-R +RW
mode)
*1*2
*2
*2
*1*2
——
*5
*6*7
*6*7
*6*7
*6*7
: Functions available; —: Not available
*6*7
*6*7
*6*7
*6*7
SD
memory
card
*3
*4
25
HDD, DISCS
HDD, and usable discs and marks (logos) Function
Allows extensive recording (approx. 11 hours in FINE
HDD
DVD-RAM Ver. 2.1 (8 cm)
mode). Allows you to delete unnecessary scenes or edit scenes.
Allows you to delete unnecessary scenes or edit scenes.
DVD -RW [Ver1.1 (8 cm) 2x speed (2x/1x)]
DVD -R [for General Ver. 2.0 (8 cm)]
+RW Ver. 1.2 (8 cm)
*
1: Playback on all DVD players is not guaranteed. The disc must be finalized before being played back on a DVD player.
*
2: Playback on all DVD players is not guaranteed.
Note:
This DVD video camera/recorder can use only the 8-cm bare discs not packed in a square cartridge, square caddy case or round DVD holder. The discs in a square cartridge, square caddy case or round DVD holder can be used if they are removed from the package, but take great care not to dirty or scratch the bare disc.
• It is recommended that you use Hitachi Maxell HG type single-sided discs, since their compatibility with this DVD video camera/recorder has been confirmed.
When using an HG type double-sided disc, take great care with handling it. Using a disc other than these discs may not allow the DVD video camera/recorder to deliver optimum performance.
Allows you to choose the VR mode for deleting unnecessary scenes or editing scenes, or the VF mode in which deletion or editing is not possible, but high compatibility with DVD players is provided *1.
Provides high compatibility with DVD players *1. No deletion or editing is possible.
Provides high compatibility with DVD players but does not need to be finalized *2. Scenes can be deleted immediately after being recorded.
INFORMATION ON DVD-R
For optimum recording on DVD-R, this DVD video camera/recorder writes control data to the disc in order to automatically make adjustments when it is inserted and ejected accompanying recording. If the disc has no area to be written for adjustment, recording may not be possible. To prevent this, do not insert or eject a DVD-R accompanying recording more than 100 times. This DVD video camera/recorder cannot record a DVD-R in the VR mode.
NOTES ON FINALIZATION
Do not insert a DVD-RW/DVD-R recorded or dubbed on this DVD video camera/recorder but not
finalized, into a recordable device, such as a DVD recorder: The recorded data may be damaged.
Use only DZ-HS503 to record/dub or finalize a DVD-RW (VF-mode)/DVD-R/+RW recorded or
dubbed on this DVD video camera/recorder but not finalized: Using any other device could damage the data recorded on the disc.
DVD-RW/DVD-R/+RW edited and finalized on PC or those finalized on another DVD recorder
may not be playable on this DVD video camera/recorder, depending on the editing software used or recorded status of DVD-RW/DVD-R/+RW.
If you insert a DVD-R recorded on a DVD video camera/recorder other than DZ-HS503 and not
finalized, the Disc Navigation screen will automatically start, and no recording can be done on the disc nor can it be finalized.
Do not insert a DVD-RW/DVD-R that was recorded by a DVD recorder manufactured by a
company other than Hitachi, and which has not been finalized, in this DVD video camera/ recorder: Doing so will make the disc unusable.
26
EXAMPLES OF DISCS THAT CANNOT BE USED ON THIS DVD VIDEO CAMERA/RECORDER
CD
CD-R
CD-RW
CD-ROM
DVD-ROM
DVD-Video
DVD-R (4.7 GB) for Authoring Ver. 2.0
DVD-R DL (Dual Layer)
DVD-RW DL (Dual Layer)
+R DL (Double Layer)
+RW DL (Double Layer)
+R
Discs other than those with diameter of 8 cm
AVAILABLE CARDS
SD memory cards can be used on this DVD video camera/recorder (incompatible with 2 GB). When using an exclusive adapter, a miniSD memory card and micro SD memory card can be used in the same way as an SD memory card. No SDHC card or multimedia card can be used.
Handling card
Do not use cards other than
the designated ones.
Be sure to perform trial
recording before recording vital images.
Do not touch the card
terminal or allow it to touch metal.
Do not paste anything other
than exclusive label on label pasting portion.
Do not subject card to impact, bend or drop it.
Do not disassemble card or modify it.
Do not expose card to water.
Do not use or store card in the following
places:
Where the temperature is high, such as in vehicle at high temperatures, under burning sun or near a heater
Where humidity is high, or in dusty place
When the erasure prevention switch is locked,
no recording, deletion or editing will be possible on the card: Only playback will be possible.
Terminal
CAUTIONS FOR DISC AND CARD
It is recommended that you create a backup
file for valuable data on hard disk of PC.
Do not do the following, or the data on disc or
card may be damaged or lost:
Do not remove the disc or card or turn DVD video camera/recorder off during reading or writing of data
Do not use DVD video camera/recorder in a place subject to static electricity or electrical noise
Do not have printing done at a print lab or DPE service
Do not leave a DVD unused in the DVD video camera/recorder for a long time
Note:
This DVD video camera/recorder can play back image data recorded on other digital cameras conforming to the DCF (Design rule for Camera File system) standard. The range of image data playable on this DVD video camera/recorder is that with pixels from 80 horizontal × 60 vertical to 4000 horizontal × 3000 vertical.
DCF is an integrated image file format of digital cameras: Image files can be used on all digital devices conforming to DCF.
Image data edited on PC and certain types of image data may not be visible on this DVD video camera/ recorder.
The image data recorded on another device may not be playable on this DVD video camera/recorder.
Erasure prevention switch
Locked status
27
Preparations for Power Supply
USING DVD VIDEO CAMERA/RECORDER WITH AC ADAPTER/CHARGER
It is recommended that you use the AC adapter/charger to power the DVD video camera/recorder from household AC outlet when you perform settings on it, play back or edit images, or use it indoors.
Note:
Be sure to use the specified AC adapter/charger (DZ-ACS3) to power the DVD video camera/recorder. Using other AC adapter/chargers could cause electric shock or result in fire.
Power cable
AC adapter/charger
DC power cord
1 Connect the power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet. 3 Plug one end of DC power cord into the DC
output jack on AC adapter/charger.
4 Attach the other end of DC power cord to the
battery attachment platform on DVD video camera/recorder. Use the same procedure as that for battery when attaching and detaching the DC power cord: See page 30.
28
Setting Up the Battery
The DZ-BP14S battery (provided) has not been charged at purchase time: Charge it before using the DVD video camera/recorder.
Note:
Be sure to use the DZ-BP14S, DZ-BP14SJ (optional) or DZ-BP21SJ (optional) battery for the DVD video camera/
recorder: Using other batteries could cause the DVD video camera/recorder to malfunction, or result in fire.
Be sure to use the DZ-ACS3 AC adapter/charger to charge the battery: Using other chargers could cause electric shock or fire.
Charge the battery at temperatures of 10 – 30ºC.
CHARGING BATTERY
Use the provided AC adapter/charger to charge the battery.
1 Connect the power cable to AC adapter/
charger.
2 Plug the power cable into AC outlet.
CHARGE indicator
DC output terminal
3 Attach the battery to AC adapter/charger.
Note:
When charging a battery, unplug the DC power cord from the DC output jack on AC adapter/charger.
Battery
Powe r cable
AC adapter/charger
29
Battery charged status
You can find out the charged status of battery by checking the CHARGE indicator on AC adapter/ charger:
Charge status CHARGE indicator
During charge Lit
Charge complete Goes out
Note:
See “Troubleshooting” on page 149 when the CHARGE indicator blinks.
Reference for time required to charge battery (at approx. 25ºC)
DZ-BP14S (provided)/DZ-BP14SJ (optional): Approx. 165 minutes DZ-BP21SJ (optional): Approx. 235 minutes The charge time will vary depending on the remaining power level of battery.
ATTACHING BATTERY TO DVD VIDEO CAMERA/RECORDER
1 Fit the battery to the battery attachment
platform on this DVD video camera/recorder and slide it downward until a click is heard.
Te r mi n a l side must be down.
Note:
Make sure that the battery is in the correct orientation.
Make sure that the battery is securely attached:
Incomplete attachment could cause the battery to fall, resulting in damage.
REMOVING BATTERY
After using the DVD video camera/recorder, remove the battery from it.
1 While holding down the BATTERY EJECT
button, slide the battery upward to remove it.
Note:
For safety, be sure to turn the DVD video camera/
recorder off before attaching or removing the battery.
Be careful not to drop the removed battery.
If the battery remains attached, minute level current
will flow even if the DVD video camera/recorder is off, and the battery will discharge.
Set the power switch to OFF before removing the battery.
30
Loading...
+ 133 hidden pages