HITACHI CP-X385WT User Manual

PLEASE READ

We are in no way responsible for the contents of the manual. We do not guarantee its accuracy and we do not make any claim of copyright. The copyright remains the property of their respective owners.

Visit the site to read the latest projector news and reviews, read and comment on projector specifications, download user manuals and much more.

Liquid Crystal Projector

CP-X385W

USER'S MANUAL Vol.1 Basic

Please read this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG Teil 1 Grundlagen

Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.

MANUEL D'UTILISATION Vol.1 Fondements

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.

MANUALE D'ISTRUZIONI Vol.1 Informazioni di base

Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO Vol.1 Básico

Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.

GEBRUIKSAANWIJZING Vol.1 Basis

Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK Vol.1 Grunnleggende

Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.

INSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico

Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

NORSK

PORTGÊS

中中文文

REGULATORY NOTICES

LCD Projector CP-X385W

USER'S MANUAL Vol.1 (Basic)

USER'S MANUAL

Thank you for purchasing this projector.

WARNING • Please read the accompanying manual “SAFETY

INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.

NOTE

• The manufacturer assumes no responsibility for any errors that may appear in this manual

• The reproduction, transmission or use of this document or contents is not permitted without express written authority.

TRADEMARK ACKNOWLEDGEMENT :

• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.

• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.

• VESA and SVGA are trademarks of the Video Electronics Standard Association.

• Windows is a registered trademark of Microsoft Corporation.

• All other trademarks are the property of their respective owners.

• The information in this manual is subject to change without notice.

CONTENTS

Page

PROJECTOR FEATURES................2

PREPARATIONS ..............................2

PART NAMES...................................4

SETTING UP

THE PROJECTOR ............................6

CONNECTING

YOUR DEVICES................................8

USING THE REMOTE

CONTROL.......................................13

TURNING ON THE POWER ...........14

TURNING OFF THE POWER .........16

ADJUSTING THE VOLUME ...........17

TEMPORARILY MUTING

THE SOUND....................................17

ADJUSTING THE POSITION..........18

USING THE AUTOMATIC

ADJUSTMENT FEATURE ..............19

CORRECTING KEYSTONE

DISTORTIONS ................................20

USING THE MAGNIFY

FEATURE........................................21

FREEZING THE SCREEN ..............21

SIGNAL SEARCHING.....................22

SELECTING THE ASPECT

RATIO..............................................22

TEMPORARILY BLANKING

THE SCREEN..................................22

USING THE MENU

FUNCTIONS....................................23

OPERATING THE PC SCREEN .....24

THE LAMP ......................................25

THE AIR FILTER.............................27

THE HANDLE..................................29

OTHER CARE.................................29

Page

ENGLISH

DEUTSCH

FRANÇAIS

ITALIANO

ESPAÑOL

NEDERLANDS

NORSK

PORTGÊS

中中文文

REGULATORY NOTICES

USER'S MANUALVol.1 Basic

Please read this user's manual thoroughly to ensure correct usage through understanding.

BEDIENUNGSANLEITUNG Teil 1 Grundlagen

Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.

MANUEL D'UTILISATION Vol.1 Fondements

Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.

MANUALE D'ISTRUZIONI Vol.1 Informazioni di base

Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.

MANUAL DE USUARIO Vol.1 Básico

Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.

GEBRUIKSAANWIJZING Vol.1 Basis

Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.

BRUKERHÅNDBOK Vol.1 Grunnleggende

Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.

INSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico

Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.

Liquid Crystal Projector

CP-X385W

PROJECTOR

FEATURES

This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.

Ultra High Brightness

●

Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system

Partial Magnification Function

●

Interesting parts of images can be magnified for closer viewing

PREPARATIONS

Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer if anything is missing.

NOTE

• Keep the original packing material for future reshipment.

Power cord

(US Type)

Projector

(with Lens Cap)

Keystone Distortion Correction

●

Quick correction of distorted images electrically

Whisper Mode Equipped

●

Special mode is available for reducing projector noise to achieve quieter operation

Power cord

(UK Type)

Power cord

(Europe Type)

User's Manuals

(Vol.1/Vol.2)

Safety Instructions

Carrying Bag

RGB cable

Handle

Video/Audio cable

Two AA batteries

(for the remote

control)

Mouse cable

(PS/2)

BLANK

STANDBY/ON

LASER

RGB

VIDEO

AUTO

KEYSTONE

ENTER

RESET

POSITION

ESC

FREEZEASPECT

MUTE

MAGNIFY

OFFON

VOLUME

Remote Control

Transmitter

WARNING Precautions to observe in regards to the power cord: Please use extra

caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:

•

Only plug the power cord into outlets rated for use with the power cord's specified voltage range.

• Only use the power cord that came with the projector.

• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-

PRONGED PLUG!

• Make sure that you firmly connect the power cord to the projector and wall outlet.

Connect your devices to the projector

Connect your computer, VCR and/or other devices you will be using to the projector.

Insert the batteries into the remote

control

Connect the power cord

(1)

Connect the connector of the electrical power cord to the AC inlet of the main unit.

(2) Firmly plug the power cord's plug into the outlet

Power outlet

8 12

〜

(2)

Power cord AC inlet

(1)

PART NAMES

THE PROJECTOR

Indicates the corresponding reference page

Speaker

Handle Hook

Power Switch

AC Inlet

(to the Power Cord)

Ventilation Openings

(Intake)

STANDBY/ON Button

KEYSTONE Button

Foot Adjuster Button

Filter Cover

Air Filter and Intake

( )

for the Cooling Fan

Rear Foot Adjuster

Foot Adjuster

Zoom Ring Focus Ring

Remote Control

Sensor

Lens

Lens Cap

INPUT Button

LAMP Indicator

TEMP Indicator

POWER Indicator

RESET Button

MENU Button

Ventilation Openings (exhaust)

S-VIDEO Port

COMPONENT VIDEO

Y Port

B/PB Port

R/PR Port

VIDEO IN Port

AUDIO IN R Port

AUDIO IN L Port

AUDIO IN 1 Port

AUDIO IN 2 Port

AUDIO OUT Port

11 11 11

RGB IN

AUDIO IN VIDEO IN S-VIDEO IN

AUDIOINAUDIO OUT1

2 USB

RGB OUT CONTROL

TERMINAL PANEL

Remote Control

Sensor

RGB IN 1

RGB IN 2

CONTROL

RGB OUT

USB

Port

THE REMOTE CONTROL

STANDBY/ON

LASER

BLANK

RGB

VIDEO

AUTO

ENTER

KEYSTONE

RESET

FREEZEASPECT

ESC

MAGNIFY

POSITION

OFFON

VOLUME

MUTE

LASER button

STANDBY/ON

VIDEO button

Disk Pad

AUTO button

MENU button

,,, Cursor buttons

POSITION button

ASPECT button

MAGNIFY button

button

BLANK button

RGB button

MOUSE / RIGHT

Button

KEYSTONE button

ENTER button

RESET button

FREEZE button

ESC button

MUTE button

VOLUME button

SEARCH button

WARNING • The laser pointer of the remote control transmitter is used in

place of a finger or rod. Never look directly into the laser beam outlet or point the laser beam at other people. The laser beam can cause vision problems.

AVOID EXPOSURE-

NOTE

LASER RADIATIONS IS

EMITTED FROM THIS

APERTURE

Complies with 21 CFR 1040. 10 and 1040. 11 except for deviations pursuant to Laser Notice No.50, dated 2001.7.26 SMK CORPORATION 6-5-5 Togoshi Shinagawa-ku, Tokyo, JAPAN 142-8511 MANUFACTURED

Novemver 2001

PLACE OF MANUFACTURER: A

• Keep the remote control transmitter away from children and pets.

• Do not give the remote control transmitter any physical impact. Take care not to drop.

CAUTION

LASER RADIATIONDO NOT STARE INTO BEAM MAX. OUTPUT: 1mW WAVE LENGTH

: 650nm

CLASS2 LASER PRODUCT

LASER RADIATION

DO NOT STARE INTO BEAM

CLASS2 LASER PRODUCT MAX. OUTPUT: 1mW WAVE LENGTH: 650nm

IEC60825-1 :1993+A1:1997

• Do not place the heavy objects on the remote control transmitter.

• Do not wet the remote control transmitter or place it on any wet object.

• Do not place the remote control transmitter close to the cooling fan of the projector.

• Do not disassemble the remote control transmitter.

SETTING UP THE PROJECTOR

CAUTION • of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.

• If you press the elevator buttons without holding the projector, the projector might crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.

Install the projector in a suitable environment according to instructions

Angle Adjustment

Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 9˚ approximately.

Lift up the front side of the

projector, and pressing the foot adjuster button, adjust the projection angle.

Press the foot adjuster button

Release the button to lock at the desired angle.

Turn the rear foot adjuster to adjust

the left-right slope. Do not force the foot adjuster screws. This could damage the adjusters or cause the lock to fail.

Rear Foot Adjuster

Adjusting the Screen Size and Projection Distance

Refer to the illustrations and tables below to determine the screen size and projection distance.

The values shown in the table are calculated for a full size screen a:Distance from the projector to the screen (±10%) b:Distance from the lens center to the bottom of the screen (±10%) c:Distance from the lens center to the top of the screen (±10%)

If 4:3 aspect ratio

Top View

Screen size [inches (m)]

40 (1.0) 62 (1.6) 82 (2.1) 60 (1.5) 94 (2.4) 123 (3.1)

80 (2.0) 127 (3.2) 164 (4.2) 100 (2.5) 160 (4.1) 205 (5.2) 120 (3.0) 192 (4.9) 246 (6.3)

Side View

150 (3.8) 241 (6.1) 308 (7.8)

200 (5.0) 323 (8.2) 411 (10.4)

a [inches (m)]

Min. Max.

CONNECTING YOUR DEVICES

Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)

CAUTION • Incorrect connecting could result in fire or electrical shock. Please read this manual and the separate “SAFETY INSTRUCTIONS”.

ATTENTION

• Whenever attempting to connect other devices to the projector, please thoroughly read the manual of each device to be connected.

• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.

• Make sure that you connect devices to the correct port. Incorrect connection may result in malfunction and/or damage to the device and/or projector.

• A component cable and some other cables have to be used with core set. Use the accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.

• Secure the screws on the connectors and tighten.

Precautions to observe when connecting other devices to the projector

Indicates the corresponding reference page

Display monitors

DVD players

Laptop computers

VCRs

Desktop computers

Ports and Cables

Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.

Function Projector Port Connection Cables

RGB input

RGB output RGB OUT

Audio input (from the computer)

USB mouse control USB Optional USB cable

PS/2 mouse control

ADB mouse control Optional ADB mouse cable

Serial mouse control Optional serial mouse cable

RS-232C communication Optional RS-232C cable

S-video input S-VIDEO IN

Video input VIDEO IN Accessory audio/video cable

Component video input

Audio input (from video equipment)

Audio output AUDIO OUT Optional audio cable with stereo mini jack

RGB IN 1

RGB IN 2

AUDIO IN 1 (interlocked with RGB IN 1)

AUDIO IN 2 (interlocked with RGB IN 2)

CONTROL

COMPONENT VIDEO Y

COMPONENT VIDEO CR/P

AUDIO IN L

AUDIO IN R

Accessory RGB cable or optional RGB cable with D-sub 15-pin shrink jack and inch thread screws

Optional audio cable with stereo mini jack

Accessory PS/2 mouse cable

Optional S-video cable with mini DIN 4-pin jack

Optional component video cableCOMPONENT VIDEO CB/P

Accessory audio/video cable or optional audio cable with RCA jack

NOTE

About Plug-and-Play Capability

• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB IN 1 port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.

• Plug-and-Play is a system composed of the computer, its operating system and peripheral equipment (i.e. display devices).

• Please use the standard drivers as this projector is a Plug-and-Play monitor.

• Plug-and-Play may not function properly with some type of computers. Use the RGB

IN 2 port if Plug-and-Play does not function correctly.

AUDIO IN

AUDIO cable

RGB cable

AUDIO OUT

RGB IN

Analogue

RGB OUT

AUDIO IN VIDEO IN S-VIDEO IN

AUDIOINAUDIO OUT1

2 USB

RGB IN

RGB OUT CONTROL

CONNECTING YOUR DEVICES (continued)

Connecting to a Computer

ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.

AUDIO IN VIDEO IN S-VIDEO IN

AUDIOINAUDIO O UT1

2USB

RGB IN

RGB OUT CONTROL

NOTE

• Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.

• For some RGB input modes, the optional Mac adapter is necessary.

Laptop computer

USB cable

If connecting to a USB port equipped computer

USB IN

USB OUT

AUDIO IN

AUDIO cable

AUDIO OUT

Desktop computer

RGB IN

RGB cable

Analogue

RGB OUT

CONTROL IN CONTROL OUT

MOUSE cable

Connecting to a DVD Player

A A A

AUDIO IN VIDEO IN S-VIDEO IN

B B B

AUDIOINAUDIO O UT1

2USB

COMPONENT VIDEO IN

COMPONENT cable

COMPONENT VIDEO OUT

Ifusingacomponent videoconnection

RGB IN

RGB OUT CONTROL

AUDIO/VIDEO IN

AUDIO/VIDEO cable

AUDIO/VIDEO OUT

Ifusinganaudio/video connection

DVD player

Connecting to a VCR

AUDIO IN VIDEO IN S-VIDEO IN

A A A

AUDIOINAUDIO OUT1

2 USB

RGB IN

RGB OUT CONTROL

AUDIO/VIDEOIN AUDIO/VIDEOOUT

S-VIDEOIN

S-VIDEO IN

S-VIDEO cable

If using a S-video connection

S-VIDEO OUT

AUDIO/VIDEO cable

VCR

S-VIDEO cable

If using a S-video connection

S-VIDEOOUT

RGB cable

RGBOUT

RGBIN

AUDIO IN VIDEO IN S-VIDEO IN

AUDIOINAUDIO OUT1

2USB

RGB IN

RGB OUT CONTROL

CONNECTING YOUR DEVICES (continued)

Connecting to a Display Monitor

Display monitor

USING THE REMOTE CONTROL

Putting batteries into the remote control unit

CAUTION

Precautions to observe in regards to the batteries

Always handle the batteries with care and use them only as directed. Improper use may result in

battery cracking or leakage, which could result in fire, injury and/or pollution of the surrounding environment.

• Keep the battery away from children and pets.

•

Be sure to use only the batteries specified for use with the remote control. Do not mix new batteries with used ones.

•

When inserting batteries, verify that the plus and minus terminals are aligned correctly (as indicated in the remote control).

• When you dispose the battery, you should obey the law in the relative area or country.

Remove the battery

cover

Push the knob while lifting up the battery cover in the direction of the arrow.

Insert the batteries

2 3

Align and insert the two AA batteries (that came with the projector) according to their plus and minus terminals (as indicated

Close the battery cover

Replace the battery cover in the direction of the arrow and snap it back into place.

in the remote control).

Operating the remote control

•

The remote control works with both the projector's front and rear remote sensors.

•

The range of the remote sensor on the front and back is 3 meters with a 60-degree range (30 degrees to the left and right of the remote sensor).

•

Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to

30 degrees

use the remote control in an area free from obstacles that could block the remote control's output signal to the projector.

•

Only use the accompanying remote control. Using other remote controls (even of similiar models) to control the

approximately 3 meters

CP-X385W may result in unexpected operation.

30 degrees

approximately 3 meters

ATTENTION

Precautions to observe when using the remote control

• Do not drop or otherwise expose the remote control to physical impact.

•

Do not get the remote control wet or place it on wet objects. Doing so may result in malfunction.

• Remove the batteries from the remote control and store them in a safe place if you won't be using the remote control for an extended period.

• Replace the batteries whenever the remote control starts to malfunction.

•

When strong light, such as direct sunlight or light from an extremely close range (such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.

Make sure that the power cord is firmly and

correctly connected to the projector and outlet

Turn on the projector's power

Set the power switch to [ | ] (ON). The projector will go to STANDBY mode and the POWER indicator will light to solid orange.

Press the STANDBY/ON button (control

panel or remote control)

• The projector begins warming up and the POWER indicator blinks green.

• The POWER indicator stops blinking and lights to solid green once the projector's power is completely on.

Remove the lens cap

The picture is projected.

VIDEO

Selecting an Input Signal

Using the remote control

If selecting RGB input Press the RGB button

Press this button to toggle between the devices connected to RGB IN 1 and 2. As illustrated below, each time you press the RGB button, the projector switches between RGB IN 1 and 2. Select the signal you wish to project.

RGB

RGB IN 1 RGB IN 2

If selecting video input Press the VIDEO button

Press this button to toggle between the devices connected to VIDEO IN, SVIDEO IN and COMPONENT VIDEO. As illustrated below, each time you press the VIDEO button, the projector switches between VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.

VIDEO IN S-VIDEO IN

Using the projector's control panel

Press the INPUT button

As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.

INPUT

RGB IN 1 RGB IN 2 VIDEO IN

S-VIDEO INCOMPONENT VIDEO

COMPONENT VIDEO

Use the zoom ring to adjust the

screen size

Use the focus ring to focus the

picture

+ 37 hidden pages