Hitachi CP-S225 User Manual

www.touchboards.com 205 Westwood Ave.Long Branch, NJ 07740 1-866-942-6273 Sales@touchboards.com
Liquid Crystal Projector
CP-S225/CP-X275
(CP-S225WA/CP-X275WA)
USER'S MANUAL Vol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
LCD Projector CP-S225/CP-X275
USER'S MANUAL Vol.1 (Basic)
USER'S MANUAL
Thank you for purchasing this projector.
WARNING • Please read the accompanying manual “SAFETY
INSTRUCTIONS” and this “USER'S MANUAL” thoroughly to ensure correct usage through understanding. After reading, store this instruction manual in a safe place for future reference.
ENGLISH
NOTE
• The manufacturer assumes no responsibility for any errors that may appear in this manual
• The reproduction, transmission or use of this document or contents is not permitted without express written authority.
TRADEMARK ACKNOWLEDGEMENT :
• PS/2, VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple, Mac and ADB are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
• All other trademarks are the property of their respective owners.
• The information in this manual is subject to change without notice.
CONTENTS
Page
PROJECTOR FEATURES................2
PREPARATIONS ..............................2
PART NAMES...................................4
SETTING UP
THE PROJECTOR ............................6
CONNECTING
YOUR DEVICES................................8
USING THE REMOTE
CONTROL.......................................12
TURNING ON THE POWER ...........14
TURNING OFF THE POWER .........16
ADJUSTING THE VOLUME ...........17
TEMPORARILY MUTING
THE SOUND....................................17
ADJUSTING THE POSITION..........18
USING THE AUTOMATIC
ADJUSTMENT FEATURE ..............19
CORRECTING KEYSTONE
DISTORTIONS ................................20
USING THE MAGNIFY
FEATURE........................................21
FREEZING THE SCREEN ..............21
SIGNAL SEARCHING.....................22
SELECTING THE ASPECT
RATIO..............................................22
TEMPORARILY BLANKING
THE SCREEN..................................22
USING THE MENU
FUNCTIONS....................................23
THE LAMP ......................................24
THE AIR FILTER.............................26
OTHER CARE.................................28
REGULATORY NOTICES...............29
Page
1
PROJECTOR
FEATURES
This liquid crystal projector is used to project various computer signals as well as NTSC / PAL / SECAM video signals onto a screen. Little space is required for installation and large images can easily be realized.
Ultra High Brightness
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly efficient optical system
Partial Magnification Function
Interesting parts of images can be magnified for closer viewing
PREPARATIONS
Your projector should come with the items shown below. Check to make sure that all the items are included. Contact your dealer if anything is missing.
NOTE
• Keep the original packing material for future reshipment.
Power cord
(US Type)
Projector
Liquid Crystal Projector
CP-S225/CP-X275
(CP-S225WA/CP-X275WA)
USER'S MANUALVol.1 Basic
Please read this user's manual thoroughly to ensure correct usage through understanding.
BEDIENUNGSANLEITUNG Teil 1 Grundlagen
Bitte lessen Sie diese Benutzerhandbuch zugunsten der korrekten Bedienung aufmerksam.
MANUEL D'UTILISATION Vol.1 Fondements
Nous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement de l'appareil.
MANUALE D'ISTRUZIONI Vol.1 Informazioni di base
Vi preghiamo voler leggere attentamente il manuale d'istruzioni in modo tale da poter comprendere quanto riportato ai fini di un corretto utilizzo del proiettore.
MANUAL DE USUARIO Vol.1 Básico
Lea cuidadosamente este manual del usuario para poder utilizar corretamente el producto.
GEBRUIKSAANWIJZING Vol.1 Basis
Lees voor het qebruik alstublieft deze handleiding aandachtig door, om volledig profijt te hebben van de uitgebreide mogelijkheden.
BRUKERHÅNDBOK Vol.1 Grunnleggende
Vennligst les denne bruksanvisningen grundig for å være garantert driftssikker bruk.
NSTRUÇÕES DO PROPRIETÁRIO Vol.1 Básico
Para assegurar o uso correto do equipamento, por favor leia atentamente este manual do utilizador.
ENGLISH
DEUTSCH
FRANÇAIS
ITALIANO
ESPAÑOL
NEDERLANDS
NORSK
PORTGÊS
RGB cable
Keystone Distortion Correction
Quick correction of distorted images electrically
Whisper Mode Equipped
Special mode is available for reducing projector noise to achieve quieter operation
Power cord
(UK Type)
Power cord
(Europe Type)
Video/Audio cable
User's Manuals
(Vol.1/Vol.2)
Safety Instructions
Soft carrying case
2
Two AA batteries
(for the remote
control)
STANDBY/ON
VIDEO
RGB SEARCH
ASPECT
AUTO BLANK
VOLUME
MAGNIFY
ON
MUTE
OFF
KEYSTONEFREEZE
MENUPOSITION
ENTER
ESC RESET
Remote control
WARNING Precautions to observe in regards to the power cord: Please use extra
caution when connecting the projector's power cord as incorrect or faulty connections may result in FIRE AND/OR ELECTRICAL SHOCK. Please adhere to the following safety guidelines to insure safe operation of the projector:
Only plug the power cord into outlets rated for use with the power cord's specified voltage range.
• Only use the power cord that came with the projector.
• NEVER ATTEMPT TO DEFEAT THE GROUND CONNECTION OF THE THREE-
PRONGED PLUG!
• Make sure that you firmly connect the power cord to the projector and wall outlet.
ENGLISH
Connect your devices to the projector
1
Connect your computer, VCR and/or other devices you will be using to the projector.
Insert the batteries into the remote
2
control
Connect the power cord
3
(1)
Connect the connector of the electrical power cord to the AC inlet of the main unit.
(2) Firmly plug the power cord's plug into the outlet
Power outlet
8 11
12
Power cord
(2)
(1)
AC inlet
3
PART NAMES
Power switch
14
AC power inlet
3
(to the Power Cord)
Ventilation Openings (Intake)
THE PROJECTOR
Indicates the corresponding reference page
4
THE TERMINAL PANEL
10
RGB port
Remote sensor
13
COMPONENT
11
Y port
port
C
B/PB
port
C
R/PR
S-VIDEO port
11
THE REMOTE CONTROL
RGB button
VIDEO button
ASPECT button
MAGNIFY buttons
FREEZE button
15
VIDEO
15
ASPECT
22
MAGNIFY
ON
21
OFF
21
RGB SEARCH
AUTO BLANK
STANDBY/ON
VOLUME
MUTE
KEYSTONEFREEZE
Vol.2 TECHNICAL
SEARCH button
22
14
AUTO button
19
22
17
MUTE button
17
KEYSTONE button
20
CONTROL port
4
AUDIO port
10
AUDIO
10
R port
L port
VIDEO port
11
STANDBY/ON button
BLANK button
VOLUME button
ENGLISH
POSITION button
,,, Cursor buttons
ESC button
18
23
23
MENUPOSITION
ENTER
ESC RESET
23
Vol.2
23
MENU button
RESET button
2
ENTER button
5
SETTING UP THE PROJECTOR
CAUTION
of the accompanying manual “SAFETY INSTRUCTIONS” and this manual.
• If you press the elevator buttons without holding the projector, the projector might
crash down, overturn, smash your fingers and possibly result in malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
Install the projector in a suitable environment according to instructions
Angle Adjustment
Use the foot adjusters on the bottom of the projector to adjust the projection angle. It is variable within 0˚ to 10˚ approximately.
Lift up the front side of the
1
projector, and pressing the foot adjuster button, adjust the projection angle
Press the foot adjuster button
Release the button to lock at the
2
desired angle
Make the rear foot adjuster screw to
3
adjust the left-right slope
Rear Foot Adjuster
6
ENGLISH
7
CONNECTING YOUR DEVICES
Devices You Can Connect to the Projector (Refer to this section for planning your device configuration to use for your presentation.)
CAUTION • Incorrect connecting could result in fire or electrical shock. Please
read this manual and the separate “SAFETY INSTRUCTIONS”.
ATTENTION
• Whenever attempting to connect other devices to the projector, please thoroughly
read the manual of each device to be connected.
• TURN OFF ALL DEVICES prior to connecting them to the projector. Attempting to
connect a live device to the projector may generate extremely loud noises or other abnormalities that may result in malfunction and/or damage to the device and/or projector. Refer to the “TECHNICAL” of the USER’S MANUAL (Vol.2) for the pin assignment of connectors and RS-232C communication data.
• Make sure that you connect devices to the correct port. Incorrect connection may
result in malfunction and/or damage to the device and/or projector.
• A component cable and some other cables have to be used with core set. Use the
accessory cable or a designated-type cable for the connection. For cables that have a core only at one end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
Precautions to observe when connecting other devices to the projector
Indicates the corresponding reference page
DVD players
11
Laptop computers
10
VCRs
11
Desktop computers
10
8
Ports and Cables
Refer to the table below to find out which projector port and cable to use for connecting a given device. Use this table for determining which cables to prepare.
Function Projector Port Connection Cables
RGB input RGB IN
AUDIO input (from the computer)
RS-232C communication CONTROL Optional RS-232C cable
S-video input S-VIDEO IN
Video input VIDEO IN Accessory audio/video cable
Component video input
Audio input (from video equipment)
NOTE
About Plug-and-Play Capability
AUDIO IN Optional audio cable with stereo mini jack
COMPONENT VIDEO Y
B
COMPONENT VIDEO CR/P
AUDIO IN L
AUDIO IN R
R
Accessory RGB cable or optional RGB cable with D-sub 15-pin shrink jack and inch thread screws
Optional S-video cable with mini DIN 4-pin jack
Optional component video cableCOMPONENT VIDEO CB/P
Accessory audio/video cable or optional audio cable with RCA jack
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel) compatible. Please take advantage of this function by connecting the accessory RGB cable to the RGB IN port (DDC 1/2B compatible). Plug-and-Play may not work properly if any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers as this projector is a Plug-and-Play monitor.
ENGLISH
9
CONNECTING YOUR DEVICES (continued)
A
AUDIO IN
AUDIO OUT
RGB IN
Analogue
RGB OUT
RGB cable
AUDIO cable
A
B
B
Connecting to a Computer
ATTENTION Whenever attempting to connect a laptop computer to the projector, be sure to activate the laptop's RGB external image output (set the laptop to CRT display or to simultaneous LCD and CRT display). For details on how this is done, please refer to the instruction manual of the corresponding laptop computer.
Laptop computer
Desktop computer
NOTE
• Some computers may have multiple display screen modes. Use of some of these modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
10
Connecting to a DVD Player
B
C
A
Ifusingacomponent videoconnection
Ifusinganaudio/video connection
COMPONENT VIDEO IN
COMPONENT VIDEO OUT
AUDIO/VIDEO IN
AUDIO/VIDEO OUT
S-VIDEO IN
S-VIDEO OUT
If using a S-video connection
COMPONENT cable
AUDIO/VIDEO cable
S-VIDEO cable
DVD player
Connecting to a VCR
ENGLISH
VCR
11
Operating the remote control
The remote control works with both the projector's front and rear remote sensors.
The range of the remote sensor on the front is 3 meters with a 90-degree range (45 degrees to the left and right of the remote sensor), and back is 3 meters with a 60-degree range.
Since the remote control uses infrared light to send signals to the projector (Class 1 LED), be sure to use the remote control in an area free from obstacles that could block the remote control's output signal to the projector.
45 degrees
45 degrees
30 degrees
ENGLISH
30 degrees
ATTENTION
Precautions to observe when using the remote control
Do not drop or otherwise expose the remote control to physical impact.
Do not get the remote control wet or place it on wet objects. Doing so may result in
malfunction.
Remove the batteries from the remote control and store them in a safe place if you won't be using the remote control for an extended period.
Replace the batteries whenever the remote control starts to malfunction.
When strong light, such as direct sunlight or light from an extremely close range
(such as from an inverter fluorescent lamp), hits the projector's remote sensor, the remote control may cease to function. Adjust the direction of the projector to keep light from directly hitting the projector's remote sensor.
13
Make sure that the power cord is firmly and
STANDBY/ON INPUT KEYSTONE RESET
LANP
TENP
POWER
1
correctly connected to the projector and outlet
3
Turn on the projector's
2
power
Set the power switch to [ | ] (ON).
POWER indicator
YSTONE
RESET
The projector will go to STANDBY mode and the POWER indicator will light to solid orange.
Press the STANDBY/ON button (control
3
panel or remote control)
The projector begins warming up and the POWER indicator blinks green.
The POWER indicator stops blinking and lights to solid green once the projector's power is completely on.
Open the slide lens door
4
The picture is projected.
LANP
TENP
POWER
STANDBY/ON
14
Selecting an Input Signal
5
Using the remote control
If selecting RGB input Press the RGB button
Press this button to swich to the devices connected to RGB IN as illustrated below.
RGB
VIDEO IN S-VIDEO IN COMPONENT VIDEO
If selecting video input Press the VIDEO button
Press this button to toggle between the devices connected to VIDEO IN, S­VIDEO IN and COMPONENT VIDEO. As illustrated below, each time you press the VIDEO button, the projector switches between VIDEO IN, S-VIDEO IN and COMPONENT VIDEO. Select the signal you wish to project.
VIDEO
VIDEO IN S-VIDEO IN
COMPONENT VIDEO
RGB IN
Using the projector's control panel
Press the INPUT button
As illustrated below, each time you press the INPUT button, the projector switches between its input signal ports. Select the signal you wish to project.
INPUT
RGB IN VIDEO IN
S-VIDEO INCOMPONENT VIDEO
ENGLISH
Use the zoom ring to adjust the
6
screen size
Use the focus ring to focus the
7
picture
15
Loading...
+ 35 hidden pages