Projector
N
CPS210
CPS210W
User’s Manual – Operating Guide
Please read this user’s manual thoroughly to ensure correct usage understanding.
Manuel d’utilisation – Guide d'utilisation
ous vous recommandons de lire attentivement ce manuel pour bien assimiler le fonctionnement
de l’appareil.
Bedienungsanleitung – Benutzerhandbuch
Um zu gewährleisten, dass Sie die Bedienung des Geräts verstanden haben, lesen Sie dieses
Handbuch bitte sorgfältig.
Manual de usuario – Guía de funcionamiento
Lea atentamente el manual de usuario del proyector para garantizar un uso adecuado del mismo.
Manuale d'istruzioni – Guida operativa
Vi preghiamo di leggere attentamente il manuale d'istruzioni per garantire una corretta
comprensione delle istruzioni.
TECHNICAL
ENGLISH
FRANÇAIS
DEUTSCH
ESPAÑOL
ITALIANO
TECHNICAL
Projector
CPS210
CPS210W
User's Manual - Operating Guide
Thank you for purchasing this projector.
WARNING Before using, read the "User's Manual - Safety Guide" and
these manuals to ensure correct usage through understanding. After reading,
store them in a safe place for future reference.
NOTE
• The manufacturer assumes no responsibility for any errors that may appear in this manual.
• The reproduction, transmission or use of this document or contents is not permitted without
express written authority.
TRADEMARK ACKNOWLEDGMENT :
• VGA and XGA are registered trademarks of the International Business Machines Corporation.
• Apple and Mac are registered trademarks of Apple Computer, Inc.
• VESA and SVGA are trademarks of the Video Electronics Standard Association.
• Windows is a registered trademark of Microsoft Corporation.
All other trademarks are the property of their respective owners.
• The information in this manual is subject to change without notice.
1
Projector Features
This multimedia projector is used to project various computer signals as well as
NTSC / PAL / SECAM video signals onto a screen. Little space is required for
installation and large images can easily be realized.
Ultra High Brightness
●
Crisp, ultra-bright presentations is achieved by using a UHB (ultra high brightness) lamp and a highly
efficient optical system.
Whisper Mode Equipped
●
Special mode is available for reducing projector noise to achieve quieter operation.
User Memory Function
●
This projector can memorize 4 settings by MY MEMORY function.
Partial Magnification Function
●
Interesting parts of images can be magnified for closer viewing.
Keystone Distortion Correction
●
Quick correction of distorted images electrically.
Preparation
Please see the “Contents Of Package” of the “User’s Manual – Quick Guide”.
Your projector should come with the items shown there. Contact your dealer
anything is missing.
NOTE
2
• Keep the original packing material for future reshipment.
Contents
Projector Features
Preparation
Part Names
The Projector ………………………4
Fastening The Lens Cap …………4
The Remote Control ………………6
Setting Up
Arrangement ………………………7
Adjusting The Projector’s
Elevator ……………………………8
Connecting Your Devices…………9
Connecting Power Supply ………11
Remote Control
Putting Batteries …………………12
Operating The Remote Control…13
Power ON/OFF
Turning On The Power …………14
Selecting An Input Signal ………15
Turning Off The Power …………16
Operating
Adjusting The Volume …………17
Temporarily Muting The Sound…17
Adjusting The Position …………18
Using The Automatic
Adjustment Feature………………19
Correcting Keystone
Distortions…………………………19
Using The Magnify Feature ……20
Freezing The Screen ……………20
Signal Searching …………………21
Selecting The Aspect Ratio ……21
Temporarily Blanking
The Screen ………………………21
…………………………………………………………
……………………………………………………
……………………………………
……………………………………………………
……………………………………………………
…………………………………………
…………………………………………
12
14
17
2
Multifunctional Settings
2
4
7
Using The Menu Functions ……22
MAIN Menu ………………………23
PICTURE-1 Menu ………………24
PICTURE-2 Menu ………………26
INPUT Menu ……………………27
AUTO Menu ………………………29
SCREEN Menu …………………30
OPTION Menu ……………………31
Lamp
Air Filter
Other Care
Troubleshooting
Specifications
TECHNICAL
………………………………………………………………
Replacing The Lamp ……………33
…………………………………………………………
Caring For The Air Filter…………34
Replacing The Air Filter …………35
Caring For The Inside
Of The Projector …………………36
Caring For The Lens ……………36
Caring For The Cabinet
And Remote Control ……………36
Related Messages ………………37
Regarding
The Indicator Lamps ……………39
Phenomena That May Easily Be
Mistaken For Machine Defects …41
Warranty And After-Service ……42
……………………
……………………………………………………
……………………………………
…………………………………………
22
32
34
36
37
43
3
Part Names
The Projector
Zoom ring
Focus ring
Lens
(The picture is
projected from
here.)
Lens cap
15
15
14
Projector (Front/Right)
Indicates the corresponding
reference page
8
Elevator feet
8
Fastening The Lens Cap
To avoid losing, please fasten the lens cap to the projector using the strap.
Fix the strap to the strap ring of lens
1
cap, as the right drawing.
Lens cap Strap ring Strap
34
Air filter cover
(An air filter is
inside.)
Remote sensor
13
Elevator button
Pull
Put one piece of the strap into the
2
groove on rivet, as the right drawing.
Strap Rivet
Push the rivet into the strap hole.
3
Strap
hole
(Bottom side)
Push in
Rivet
4
STANDBY/ON
INPUT
POWER
LAMP
TEMP
MENU
Part Names (continued)
The Projector (continued)
INPUT button
toggles between the signal
ports.
RGB VIDEO
S-VIDEO
COMPONENT VIDEO
STANDBY/ON
button
prepares for turning the
power on/off. Refer to the
section “Power ON/OFF”.
15 14 39
14
AUDIO R port
L port
(from a video equipment)
POWER indicator
tells the state of power
supply. Refer to the section
“Power ON/OFF”.
10
10
TEMP indicator
lights or blinks when any
problem about internal
temperature has happened.
39
LAMP indicator
lights or blinks when any
problem about the lamp has
happened.
22
MENU buttons
operate the menu function.
AUDIO port
(from a computer)
S-VIDEO port
VIDEO port
COMPONENT VIDEO - Y
COMPONENT VIDEO - C
COMPONENT VIDEO - CR/PR
10
10
10
10
B/PB
A
C
IN
10
10
11
Projector (Rear/Left)
Power switch
14
AC inlet
10
CONTROL
10
port
RGB port
5
Part Names (continued)
The Remote Control
RGB button
15
selects the input signal of
RGB port.
VIDEO button
15
toggles between the signal
ports of VIDEO, S-VIDEO
and COMPONENT VIDEO.
ASPECT button
toggles between the
modes for aspect ratio.
MAGNIFY ON/OFF
buttons
turns on/off the MAGNIFY
mode.
In the MAGNIFY mode,
To move the
magnified area,
(1) Press the POSITION
button.
(2) Use the cursor buttons
to move the picture.
(3) Press the POSITION
button again to finish.
To shift the magnify
level,
use the cursor
/
buttons.
FREEZE button
freezes/reactivates the
picture.
POSITION button
turns on/off the POSITION
mode. (for RGB input)
In the POSITION mode,
To move the picture,
use the cursor buttons.
ESC button
22
returns to the previous
display at the menu
functions.
6
20
21
18
20
21
SEARCH button
searches for an input
signal between the
following signal ports of
RGB, VIDEO, S-VIDEO
and COMPONENT VIDEO.
VIDEO
ASPECT
MAGNIFY
ESC RESET
SEARCH
RGB
AUTO BLANK
ON
OFF
ENTER
22
ENTER button
VOLUME
MUTE
KEYSTONEFREEZE
MENUPOSITION
proceeds to the next
operation at the menu
functions.
,,,
22
(Cursor) buttons
works for adjusting or
menu controlling.
(STANDBY/ON)
14
button
prepares for turning the
power on/off.
19
AUTO button
executes automatic
temporarily.
21
BLANK button
blanks the screen
temporarily.
17
VOLUME button
turns on/off the VOLUME
mode.
In the VOLUME mode,
To adjust the volume,
use the cursor
/
buttons.
17
MUTE button
mutes/restores the sound.
19
KEYSTONE
button
turns on/off the KEYSTONE
mode.
In the KEYSTONE mode,
To adjust the
keystone,
use the cursor
buttons.
MENU button
22
opens/closes the menu.
22
RESET button
cancels the adjustment in
progress.
* The adjustments of the
volume etc. are not reset.
/
Setting Up
Arrangement
WARNING • Install the projector in a suitable environment according to
instructions of the “User’s Manual – Safety Guide” and this manual.
• The power outlet should be close to the projector and easily accessible.
Refer to the illustrations and tables below to determine the screen size and projection
distance.
The values shown in the table are calculated for a full size screen:800×600
(a):Distance from the projector to the screen (±10%)
(b):Distance from the lens center to the bottom of the screen (±10%)
(c):Distance from the lens center to the top of the screen (±10%)
Reference for
the 4:3 aspect ratio
Screen
Lens center
(c)
(b)
(a)
Side View
Screen Size [inch (m)]
30 (0.8) 35(0.9) 42(1.1) 2(5) 16(41)
40 (1.0) 47(1.2) 56(1.4) 2(6) 22(55)
50 (1.3) 59(1.5) 71(1.8) 3(8) 27(69)
60 (1.5) 71(1.8) 85(2.2) 4(9) 32(82)
70 (1.8) 83(2.1) 99(2.5) 4(11) 38(96)
80 (2.0) 95(2.4) 114(2.9) 5(12) 43(110)
90 (2.3) 107(2.7) 128(3.3) 5(14) 49(123)
100 (2.5) 119(3.0) 143(3.6) 6(15) 54(137)
120 (3.0) 143(3.6) 171(4.4) 7(18) 65(165)
150 (3.8) 179(4.6) 215(5.5) 9(23) 81(206)
200 (5.0) 239(6.1) 287(7.3) 12(30) 108(274)
250 (6.3) 300(7.6) 359(9.1) 15(38) 135(343)
300 (7.5) 360(9.1)
(a) [inch (m)]
Min. Max.
431(10.9)
(b)
[inch (cm)]
18(46) 162(411)
(c)
[inch (cm)]
Reference for
the 16:9 aspect ratio
Screen
Lens center
(c)
(b)
(a)
Side View
Screen Size [inch (m)]
30 (0.8) 38(1.0) 46(1.2) 0(1) 15(39)
40 (1.0) 51(1.3) 61(1.6) 1(2) 20(51)
50 (1.3) 64(1.6) 77(2.0) 1(2) 25(64)
60 (1.5) 77(2.0) 93(2.4) 1(2) 30(77)
70 (1.8) 90(2.3)
80 (2.0) 104(2.6)
90 (2.3) 117(3.0)
100 (2.5) 130(3.3)
120 (3.0) 156(4.0)
150 (3.8) 196(5.0)
200 (5.0) 216(6.6)
250 (6.3) 327(8.3)
300 (7.5)
(a) [inch (m)]
Min. Max.
393(10.0)
469(11.9)
108(2.8)
124(3.2)
140(3.6)
155(3.9)
187(4.7)
234(5.9)
312(7.9)
391(9.9)
(b)
[inch (cm)]
1(3) 35(90)
1(3) 41(103)
1(4) 46(116)
2(4) 51(129)
2(5) 61(154)
2(6) 76(193)
3(8) 101(257)
4(10) 127(322)
5(12) 152(386)
(c)
[inch (cm)]
7
Setting Up (continued)
Adjusting The Projector's Elevator
CAUTION •
projector might crash down, overturn, smash your fingers and possibly result in
malfunction. To prevent damaging the projector and injuring yourself, ALWAYS HOLD
THE PROJECTOR whenever using the elevator buttons to adjust the elevator feet.
You can use the elevator feet to make adjustments if the surface on which you need to set
the projector is uneven or if you otherwise need to adjust the angle of projection. The
adjustment range of the elevator feet is 0 to 9 degrees.
Press and hold in the elevator buttons.
1
Raise or lower the projector to the
2
desired height and then release the
elevator buttons.
When you release the elevator buttons, the elevator
feet will lock into position.
As necessary, you can also finely
3
adjust the height of the projector by
twisting the elevator feet by hand.
If you press the elevator buttons without holding the projector, the
Elevator buttons
Elevator feet
8
Setting Up (continued)
Connecting Your Devices
WARNING • Incorrect connecting could result in fire or electrical shock.
Whenever attempting to connect other devices to the projector, please thoroughly
read the "User's Manual - Safety Guide", this manual and the manual of each device to
be connected.
CAUTION
Attempting to connect a live device to the projector may generate extremely loud
noises or other abnormalities that may result in malfunction and/or damage to the
device and/or projector.
ATTENTION
connection may result in malfunction and/or damage to the device and/or projector.
Refer to the section “Technical” of this manual for the pin assignment of connectors and
RS-232C communication data.
• Some cables have to be used with core set. Use the accessory cable or a
designated-type cable for the connection. For cables that have a core only at one
end, connect the core to the projector.
• Secure the screws on the connectors and tighten.
• Whenever attempting to connect a laptop computer to the projector, be sure to
activate the laptop’s RGB external image output (set the laptop to CRT display or to
simultaneous LCD and CRT display). For details on how this is done, please refer to
the instruction manual of the corresponding laptop computer.
• TURN OFF ALL DEVICES prior to connecting them to the projector.
• Make sure that you connect devices to the correct port. Incorrect
NOTE
• This projector is compatible with VESA DDC 1/2B. Plug-and-Play can be achieved by
connecting this projector to computers that are VESA DDC (display data channel)
compatible. Please take advantage of this function by connecting the accessory RGB
cable to the RGB port (DDC 1/2B compatible). Plug-and-Play may not work properly if
any other type of connection is attempted.
• Plug-and-Play is a system composed of the computer, its operating system and
peripheral equipment (i.e. display devices).
• Please use the standard drivers in your computer as this projector is a Plug-and-Play
monitor.
NOTE
these modes will not be possible with this projector.
• For some RGB input modes, the optional Mac adapter is necessary.
About Plug-and-Play Capability
• Some computers may have multiple display screen modes. Use of some of
9
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
S-VIDEO
AUDIO
Y
COMPONENT VIDEO
C
B/PB CR/PR
RGB
CONTROL
2
2
2
1
3
3
4
4
5
6
5
6
5
10
6
5
6
7
8
9
7
8
9
1
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
L-AUDIO-R
VIDEO
Setting Up (continued)
Please refer to the following for connecting your devices.
See the rear of the projector. You can see the ports.
Connecting to a computer
RGB out RGB cable (D-sub 15 pin)
Audio out Audio cable (Stereo mini)
RS-232C port RS-232C cable
If using a SCART RGB input,
Video
AUDIO-L
AUDIO-R SCART SCART cable
RS-232C port RS-232C cable
Connecting to a DVD/VCR player
Video out
Audio out (L) Audio/Video cable
Audio out (R)
G out port
B
R
1
2
3
4
5
6
7
8
9
3
4
5
6
A
C
IN
If using a S-video input,
S-video out port S-video cable
Audio out (L) Audio cable
Audio out (R)
If using a component input,
Component (Y) out
Component (CB
Component (C
Audio out (L) Audio cable
Audio out (R)
If using a component input from RGB
port,
Component (C
Component (C
Audio out Audio cable(Stereo mini)
10
/PB) out Component cable
Component (Y) out
R/PR) out
B/PB) out Component cable
R/PR) out (with D-sub 15 pin)
10
5
6
7
8
9
5
6
1
2
A
C
IN
Setting Up (continued)
Connecting Power Supply
WARNING • Please use extra caution when connecting the power cord as
incorrect or faulty connections may result in FIRE and/or ELECTRICAL SHOCK.
Please adhere to the “User’s manual – Safety Guide” and the following.
• Only plug the power cord into outlets rated for use with the power cord’s specified
voltage range.
• Only use the power cord that came with the projector. If it is damaged, contact your
dealer to newly get correct one.
• Never modify the power cord. Never attempt to defeat the ground connection of the
three-pronged plug.
• Make sure that you firmly connect the power cord to the projector and wall outlet.
Connect the connector of the
1
power cord to the AC inlet of the
projector.
Firmly plug the power cord’s plug
2
into the outlet.
1
AC Inlet
Connector Side
1
11
Remote Control
Putting Batteries
CAUTION Always handle the batteries with care and use them only as directed.
Improper use may result in battery cracking or leakage, which could result in fire,
injury and/or pollution of the surrounding environment.
• Keep the battery away from children and pets.
• Be sure to use only the batteries specified for use with the remote control. Do not mix
new batteries with used ones.
• When inserting batteries, verify that the plus and minus terminals are aligned correctly
(as indicated in the remote control).
• When you dispose the battery, you should obey the law in the relative area or country.
Remove the
1
battery cover.
Slide back and
remove the battery
cover in the direction
of the arrow.
Insert the
2
batteries.
Align and insert the two
AA batteries according to
their plus and minus
terminals (as indicated in
the remote control).
Close the
3
battery cover.
Replace the battery
cover in the direction
of the arrow and
snap it back into
place.
12
Remote Control (continued)
Operating The Remote Control
ATTENTION • Do not drop or otherwise expose the remote control to physical
impact.
• Do not get the remote control wet or place it on wet objects. Doing so may result in
malfunction.
• Remove the batteries from the remote control and store them in a safe place if you
won’t be using the remote control for an extended period.
• Replace the batteries whenever the remote control starts to malfunction.
• When strong lights, such as direct sunlight or light from an extremely close range
(such as from an inverter fluorescent lamp), hit the projector’s remote sensor, the
remote control may cause to function. Adjust the direction of the projector to keep
light from directly hitting the projector’s remote sensor.
• The remote control works with the projector’s remote
sensor.
• The range of the remote sensor is 3 meters with a 60degree range (30 degrees to the left and right of the
remote sensor).
Also a remote signal reflected in the screen etc. may be
available. If it is difficult to send a remote signal to the
sensor directly, please try.
• Since the remote control uses infrared light to send
signals to the projector (Class1 LED), be sure to use the
remote control in an area free from obstacles that could
block the remote control’s output signal to the projector.
Remote sensor
30° 30°
approximately
3 meters
13
Power ON/OFF
VIDEO
ASPECT
VOLUME
MAGNIFY
AUTO BLANK
RGB
SEARCH
ON
Turning On The Power
WARNING • When the power is ON, a strong light is emitted. Do not look into the
lens or vents of the projector.
NOTE
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Make sure that the power cord is
1
firmly and correctly connected to the
POWER indicator
projector and outlet.
INPUT
STANDBY/ON
When the lens cap is attached, remove
2
the lens cap.
STANDBY/ON button
Set the power switch to [ | ] (ON).
3
Power switch (ON position)
The POWER indicator will light orange.
Press the STANDBY/ON button of the
4
projector or the button of the remote
ACIN
Power switch
control.
The projector lamp will light up and the POWER
indicator will begin blinking green.
According to a setup, the projector lamp may light
up and the POWER indicator may begin blinking
green, without pressing this button.
When the power is completely on, the indicator will
stop blinking and light green.
(STANDBY/ON) button
POWER
TEMP
MENU
LAMP
14
Power ON/OFF (continued)
Selecting An Input Signal
Using the projector’s control button
1
Press the INPUT button.
As illustrated below, each time you press the INPUT
button, the projector switches between its input signal
ports. Select the signal you wish to project.
RGB VIDEO S-VIDEO
COMPONENT VIDEO
Selecting a RGB signal, using the remote control
Press the RGB button.
When this button is pressed, the projector switches to
the RGB port.
Selecting a video signal, using the remote control
Press the VIDEO button.
As illustrated below, each time you press the VIDEO
button, the projector switches between its input signal
ports. Select the signal you wish to project.
VIDEO S-VIDEO
VIDEO button
STANDBY/ON
ACIN
RGB button
TEMP
POWER
INPUT
MENU
INPUT button
RGB
VIDEO
ASPECT
MAGNIFY
ON
RGB
VIDEO
ASPECT
MAGNIFY
ON
LAMP
SEARCH
AUTO BLANK
VOLUME
SEARCH
AUTO BLANK
VOLUME
COMPONENT VIDEO
Use the zoom ring to adjust the screen
2
size.
Use the focus ring to focus the picture.
3
Focus ring
Zoom ring
15
STANDBY/ON
INPUT
POWER
LAMP
TEMP
MENU
Power ON/OFF (continued)
VIDEO
ASPECT
VOLUME
MAGNIFY
AUTO BLANK
RGB
SEARCH
ON
Turning Off The Power
NOTE
• Turn the power on/off in right order. Please power on the projector before
the connected devices. Power off the projector after the connected devices.
Press the STANDBY/ON button of the
1
projector or the button of the remote
control.
The message “Power off?” will appear on the screen
for approximately 5 seconds.
POWER indicator
Press the STANDBY/ON button again
2
while “Power off?” the message is
visible.
The projector lamp will go off, and the POWER
indicator will begin blinking orange.
Then the POWER indicator will stop blinking and light
to solid orange when the lamp cooling is complete.
Switch the power switch to [O] (OFF).
3
Power switch (OFF position)
The POWER indicator will go off.
Attached the lens cap.
4
STANDBY/ON button
ACIN
Power switch
(STANDBY/ON) button
16
Operating
16
VOLUME
VOLUME
MUTE
Adjusting The Volume
Press the VOLUME button.
1
VIDEO
ASPECT
MAGNIFY
RGB SEARCH
ON
OFF
AUTO BLANK
VOLUME
MUTE
KEYSTONEFREEZE
As illustrated on the right, a dialog will
appear on the screen to aid you in adjusting
the volume.
VOLUME
MENUPOSITION
ENTER
ESC RESET
Use the
2
volume.
Press the VOLUME button again to close the dialog and
complete this operation.
(Even if you don't do anything, the dialog will
/
automatically disappear after a few seconds.)
Press this to increase the volume
Press this to decrease the volume
Temporarily Muting The Sound
Press the MUTE button.
1
VIDEO
ASPECT
MAGNIFY
RGB SEARCH
ON
OFF
AUTO BLANK
VOLUME
MUTE
KEYSTONEFREEZE
Press the MUTE button.
As illustrated on the right, a dialog will appear on the
screen indicating that you have muted the sound.
(If you don't do anything, the dialog will automatically
disappear after a few seconds.)
Press the MUTE or VOLUME button to restore the sound.
buttons to adjust the
VOLUME
16
VOLUME
MENUPOSITION
ENTER
ESC RESET
MUTE
16
17
Operating (continued)
Adjusting The Position
Press the POSITION button.
1
VIDEO
RGB SEARCH
ASPECT
MAGNIFY
AUTO BLANK
ON
OFF
ESC RESET
VOLUME
KEYSTONEFREEZE
ENTER
MUTE
MENUPOSITION
As illustrated on the right, a dialog will appear on the screen
to aid you in adjusting the position.
Use the
2
the position.
When you want to initialize the position, press the RESET
button during adjustment.
Press the POSITION button again to close the dialog and
complete this operation. (Even if you don't do anything, the
dialog will automatically disappear after a few seconds.)
This function is only available for RGB input.
POSITION
,,,
POSITION
buttons to adjust
NOTE
• When a menu is displayed, the operation of adjusting the position works
for the position of not the picture but the menu.
18
VIDEO
RGB SEARCH
Operating (continued)
Using The Automatic Adjustment Feature
AUTO
VIDEO
RGB SEARCH
ASPECT
MAGNIFY
AUTO BLANK
ON
OFF
KEYSTONEFREEZE
ENTER
ESC RESET
VOLUME
Press the AUTO button.
1
Automatic Adjustment for RGB Input
MUTE
MENUPOSITION
Horizontal position (H POSITION), vertical position (V POSITION),
clock phase (H PHASE) and horizontal size (H SIZE) are
automatically adjusted.
Make sure that the application window is set to its maximum size
prior to attempting to use this feature. Dark pictures may still be
incorrectly adjusted. Use a bright screen when adjusting.
Automatic Adjustment for Video Input
The signal type best suited for the respective input signal is
selected automatically.
This feature is available only if VIDEO is set to AUTO in the INPUT
menu.
NOTE
• The automatic adjustment operation requires approximately 10 seconds.
Also, please note that it may not function correctly with some input.
Correcting Keystone Distortions
Press the KEYSTONE button.
1
As illustrated on the right, a dialog will appear on
the screen to aid you in correcting the distortion.
KEYSTONE
Use the
2
Press the KEYSTONE button again to close the dialog
,
buttons to correct distortion.
and complete this operation. (Even if you don't do
anything, the dialog will automatically disappear after
a few seconds.)
ASPECT
MAGNIFY
NOTE
AUTO BLANK
ON
OFF
ESC RESET
VOLUME
MUTE
KEYSTONEFREEZE
MENUPOSITION
ENTER
• When the WIDE is selected under the ASPECT item of the MAIN menu, this
adjustment is ignored.
• The correcting keystone distortions function may not be work well with some types of
input signals.
• The adjustable range for correcting keystone distortions will vary with the type of
input signal.
KEYSTONE
+0
19
MAGNIFY
MUTE
KEYSTONEFREEZE
MENUPOSITION
OFF
ON
Operating (continued)
Using The Magnify Feature
MAGNIFY
VIDEO
ASPECT
MAGNIFY
Press the MAGNIFY (ON) button.
1
RGB
SEARCH
AUTO BLANK
ON
OFF
VOLUME
MUTE
KEYSTONEFREEZE
The projector enters MAGNIFY mode.
Press the POSITION button, then use the
2
,,,
buttons to select the area
to zoom. Press the POSITION button again
to finalize the zoom area.
MENUPOSITION
ENTER
ESC RESET
3
Use the
,
buttons to adjust the zoom
POSITIONPOSITION
level.
Press the MAGNIFY (OFF) button to exit MAGNIFY
mode and restore the screen to normal.(The
projector will also automatically exit MAGNIFY
mode if there is a change in the input signal's
state.)
NOTE
INPUT SELECT, AUTO, ASPECT or VIDEO feature is used, or, if there is a change in the
input signal's state.
• The projector will automatically exit from MAGNIFY mode if either the
ON
Freezing The Screen
Press the FREEZE button.
1
The [II] icon appears and the screen will freeze
at the current image. Press the FREEZE button
again and the [ ] appears as the projector exits FREEZE
mode.
NOTE
• The freezing function will automatically finish if either the STANDBY/ON,
SEARCH, RGB, VIDEO, BLANK, AUTO, VOLUME, MUTE, POSITION or MENU button of
remote control is pressed, or if a button of projector is pressed, or if there is a change
in the input signal’s state.
• If the projector continues projecting the same image for a long time (i.e. you forget to
exit FREEZE mode), the image might possibly remain as an afterimage. Do not leave
the projector in FREEZE mode for too long.
20
▲
FREEZE
Loading...