Hitachi CP-RX60, CPX4, CP-X345, CP-S335, PJ-LC7 User Manual

...

Hitachi’s ‘PJ Man’ (Projector Management Application)

HITACHI PJ MAN

llows you to manage, control, diagnose and schedule

vents for an individual or group* of Hitachi projectors

PROJECTOR CONTROL PROJECTOR MONITORING & DIAGNOSTICS

Control the functions of an individual or group of Hitachi projectors.

PJ Man will allow you to remotely control simple functions (power on/off, input, aspect, etc...) as well as more advanced control settings.

PROJECTOR MANAGEMENT APPLICATION

Monitor & Diagnose the status of an individual or group of Hitachi projectors.

PJ Man will show the status of your Hitachi Projector including power on/off, input source as well as lamp/ lter hours and condition.

HITACHI PROJECTOR

E-MAIL ALERTS! PROJECTOR SCHEDULING

Receive an e-mail noti cation when it’s time for scheduled maintenance or if the projector experiences an error condition.

PJ Man e-mail settings include expiration of lamp usage time,  lter cleaning reminder, cable disconnection, general errors, password protection and more.

* maximum 254 projectors

Hitachi America, Ltd | Digital Media Division

2000 Sierra Point Parkway MS: 760 Brisbane, CA 94005-1835, USA www.hitachi.us/digitalmedia

0605

| 1.800.225.1741

NETWORKING SOLUTIONS

Schedule events for an individual or group of Hitachi projectors.

PJ Man events that can be scheduled include Power On/Off and Input Selection. Projector scheduling can be set for daily, weekly, or single time events.

PROJECTOR MONITORING & DIAGNOSTICS

Connect PJ Man to Hitachi Projectors that have an embedded RJ-45 Ethernet LAN Port.

Current Hitachi Projectors with embedded Ethernet ports include: CP-X443, CP-X445, CP-X1200, CP-X1250 and CP-SX1350.

Connect PJ Man to Hitachi Projectors using an external Networking Module* (Ethernet to Serial).

Connect PJ Man to Hitachi Projectors using an RS-232C Serial Cable (cross cable)

Please check www.hitachi.us/digitalmedia for updated listing of projector models with embedded RJ-45 Ethernet LAN Ports.

Hitachi external Projector Networking Module par t numbers

• HIT-UDS-10-01: 10Base-T module and cable adapter

• HIT-UDS-100-01: 10Base-T/100Base- TX module and cable adapter

• HIT-WB2100-01: Wireless module (802.11 to Serial)

• HIT-KJ-200: 802.11 b/g Wireless Projector Networking and Presentation Module

Supported Projectors

Hitachi PJ Man currently supports the following Hitachi Projectors: CP-RS55, CP-RX60, CP-S210, CP-S235, CP-S318, CP-S335, CP-SX1350, CP-SX5600, CP-X328, CP-X340, CP-X345, CP-X440, CP-X430, CP-X443, CP-X444, CP-X445, CP-X880, CP-X885, CP-X995, CP-X1200, CP-X1230, CP-X1250, CP-SX1350, ED-S3170, ED-S3350, ED-X3270, ED-X3280, ED-X3400, ED-X3450, PJ-LC7

We are continually updating PJ Man to support additional Hitachi Projector models Please check www.hitachi.us/digitalmedia for a current listing of supported projectors.

PJ Man Minimum System Requirements

• Operating System

Windows 2000 Professional SP3 or later version Windows XP Professional SP1or later version

• CPU

Pentium 500Mhz or higher

• Memory

256MB or higher

• Hard disk

Minimum 10MB free space for installation

• Local Area Network connection (RJ-45) or Serial port (RS-232C)

Microsoft and Windows is the registered trademark of Microsoft Corporation in the US and other countries Pentium is the registered trademark of Intel Corporation in the US and other countries All other trademarks are the proper ty of their respected owners